Cars & vehicles with in Canada, Ontario, Sarnia.
-
1
3x4 Krone Big Pack, 18000 bales rotory cut with knives every 1 1/2”. 3 bale accumulator with monitor, can pack bales to around 1100 lbs each at 8 ft. Very nice clean baler
-
2
feeder house drive pulley for 1400 and 1600 Case IH combine
-
3
Used seed boots came of a 750 seed drill may fit other models 12 available make an offer text 5194402252
-
4
wanted 8 - 12 ton farm dump trailer
dual axle
doesn’t need to have lights
must be in very good condition
-
5
This plow is in perfect working condition it was mounted on a Kubota L3940 Tractor it comes with subframe mount and it works well. I do not need it as I had a loader installed on the tractor. I can help load it.
-
6
Tractor,loader,snow blower,forks and blade. 4WD 29HP rear and mid PTO 690 HRS. Like new stored in heated shop.
-
7
6200 Hi-Cap edible bean combine. Hydraulic drive Sund pickup added. 5 bar adjustable stripper bars, return elevator, grease-able straw walker bearings, newer adjustable sieves. Air lift delivery to the bean tank. Good condition, ready to go to work. Lots of spare parts, belts and pulleys for 3 different cylinder speed ranges. Hasn't been used in 10 years, always stored inside. $5,900 OBO. Phone 519-851-5007
-
8
Fully restored farmall BN in prestine condition ready for parades or leisurely drives around the block
Don't miss out on this beautiful peaice of history
Currently accepting offers
Located near goderich ontario freight can be arranged
-
9
Low hour tractor with front pto with hitch. Full set of duals front and back. Tuned up and ready to go. Fresh fluids and oil change. Great tractor
-
10
Grande tourie (Dame Jeanne)
Pour fabrication du vin.
Robinet dans le bas.
Très propre
-
11
Large 10 bolt rims
30% tread left
asking $1000/tire
-
12
Gas model with Powershift transmission and 148 loader. Loader has single joystick control plumbed from tractor direct, rear SCV not used for loader. Many upgrades done over the last few years including new seat, rebuilt starter, new battery, electronic ignition, etc. Starts easy in the cold with no ether or need to plug in.
-
13
Tool box 20W 18H 18D
Locks with key
100.00 firm lowballers ignored.
Please don’t ask if it’s still available- I won’t respond. If the add is still posted it’s available.
Sorry but I get too many tire kickers.
-
14
54in.
New Used : Used
Condition : Good
Fuel Type : Gas
Engine: Kawasaki
-
15
DD15 Eaton 18 sp automatic 373 rears truck is in great shape new clutch new water pump new batteries one box replaced a year ago wiring harness just done new air bags shocks rad 2 years old inlet and outlet nox sensor just done 1.2 kl set up for tanker equipment will be removed but can be purchased for extra tires are year old has APU bunk heater fridge also dinet set up 519-383-9088
-
16
Luma Manufacturing builds and sells stainless steel meter housings for John Deere 1910 Air Carts and Morris 6000/7000 Series Air Carts.
Luma Manufacturing's custom stainless steel meter housings are built to last and can withstand years more of wear than the standard steel material. Our meter housings are built as one solid unit, using only stainless steel and no composite materials. There is two access door panels that allow for easy maintenance and cleaning. Luma Manufacturing provides heavy-duty products that are tested and trusted by farmers across North America.We also offer a large selection of 100% stainless steel meter body parts; couplers, expansions, run covers, plates, brackets, hardware and more.
New Products! Stainless steel diffusers and splitters.
We offer custom bending and sell stainless steel tubes for air carts and strip tillers.Quick couplers:
Can be used with any OEM.
1.5 inch x 4 tubes - CAD$500/set
2 inch x 4 tubes - CAD$500/set
2 inch x 6 tubes - CAD$650/set
2.5 inch x 4 tubes - CAD$500/set
2.5 inch x 6 tubes CAD$650/setTo view more stainless steel products, buying info, contact info, testimonials & more; visit lumamfg.com
We also sell a large selection of stainless steel parts for John Deere air drills and planters.
Please call or email if you have any questions.
We Ship Anywhere in North America.The Benefits of Stainless Steel Meter Housings and Parts
-Durable high quality 304 stainless steel; stainless steel last longer and is resistant to corrosion.
-Easy to install and built to fit seamlessly with OEM parts.
-Pieces are cut and bent with precise technology to ensure consistent performance during its lifetime.
-Built to be replaced seamlessly with older steel part; allowing for a far more superior build material while offering at a competitive price compared to dealers.
-Stainless steel parts last much longer than the standard steel, it requires much less maintenance and servicing over time.
-Luma Manufacturing’s meters and parts have been tested and trusted for years by farmers.
-Can be compatible for Section Control and Section Command.
-Luma Manufacturing meters are the only ones on the market that are made completely of stainless steel.
-
17
2009 Kenworth T800 (manufacture date on door reads June 2008)
CUMMINS ISX (485HP)
398,666KM w/ 14,500 HRS
18spd.Bibeau Steel box. Truck was working daily up until the end of 2023 - it had a permit to haul that expired - truck does not have SPIFF. Solid, well running truck, LOW KMS, well maintained. Truck does have some frame issues to be addressed. We know the cost of upgrading to SPIFF, price has already been adjusted to reflect that. For sale as is!!!
-
18
1999 Volvo ved12 engine ,runs great can be heard, or buy whole truck $7500
-
19
Good Year 320/85-46 Mud Rice Tires
$250 a peice
Call or Text 519-331-5008
-
20
2015 John Deere 1795 CCS Planter 16r30”/32r15”
s/n 1A01795CLEA760342MaxEmerge 5 Package
Central Commodity System
Two Point Hitch
Variable Drive with Two Hydraulic Motors with Half - Width Disconnect
Pro-Shaft Drive with RowCommand Clutches Every 2 Rows
Tru-Vee Openers with Single Walking Gauge Wheels
Pneumatic Down Force System
Rubber Tire Closing Wheels
SeedStar Monitor System Less Display, Less Radar
Regular Seed Tube with AccuCount Sensor
Unit Mounted Coulter with 0.63 In. 25 Fluted Blades
Tri-Fold Markers with 16 In. Notched Disk, (Removed, Available)
Regular Parallel Arms
Dual Vacuum Hydraulic Flow Control Valve
32 Soybean Seed Metering Disks
16 Corn Metering Discs2 Independent Liquid Systems:
- In-Furrow with Keaton Seed Firmer Applicators
200 gal tank, 2 Surefire electric pumps, John Blue Controller
- Nitrogen application behind closing wheels with 4 tanks 340gal total,
4 Surefire electric pumpsPlanter is in good condition, always stored in shed, but not yet field ready - needs some minor usual post season maintenance some corn unit bushings etc. just put it in the shed after last acre spring 2023. Seed discs 90%, rubber is good, liquid systems have a few leaks needs some tidying up.
Reason for selling - switch to 20”.
-
21
2023 Starcraft SF DLX
------------------------------
2023 Starcraft SF DLX
-
22
1987 30 ft Sea Ray Weekender
Well maintained, New A/C last year.
-
23
If you are looking for a reliable and durable boat lift, look no further than the Multimaster 5500 lb Boat Lift from Ontario Boat Lifts. This boat lift is designed and manufactured in Canada, using high-quality aluminum and stainless steel materials. It has a 5-year structural warranty for your peace of mind.
The Multimaster 5500 lb Boat Lift is easy to use, with a large crank wheel and a spinning knob that let you adjust the height of your boat effortlessly. It also has vinyl bunks and side guides that help you dock your boat smoothly and safely.
This boat lift can accommodate boats of 24 to 28 feet, as well as pontoon boats. You can also add optional accessories like motors, wheels, canopies, and vertical entry guides to enhance your boating experience.
Don't wait any longer, call us now at 1-855-200-5438 or visit OntarioBoatLifts.com to order your Multimaster 5500 lb Boat Lift today.
-
24
Very clean for its age and a very smooth riding boat. Runs amazing. Comes with tandem axle trailer which has all new tires all around including spare.
Engine is a ford 351 also known has a cobra 5.8L v8 with a 4 barrel Holley carb.
Boat has functioning trim tabs to level the boat
Outdrive is a OMC cobra which has been completely refurbished and rebuilt. Also have a spare complete Outdrive.
Outdrive has a 4 fin prop and also have spare 3 fin prop
Oil is changed in everything every single year
Comes with Bimini and a trailer cover
Currently only have one picture and going to upload more.
Feel free to ask more questions if needed will upload pictures asap. Thanks.
Only reason for selling is looking to get a bigger boat.
226-376-0773
-
25
1988 Sea Ray Seville 21' with cuddy cabin, 4.3 V6 Mercruiser 205 HP. good condition, runs well, port-a-potty. All work done by boat mechanic at Bridge View Marina call 1-226-402-1572 willing to trade for Van, or conversion van ,convertible, willing to add $ if safetied let me know what you have, comes with rack and launch at Bridge View Marina for the 2023 season, comes with trailer
-
26
Low hours rxtx 300 triple black with tech package. 18hrs with entened 4 year factory warrenty. Properly broken in and had its first oil change and plugs done. Comes with boarding step and cover. Any questions ask.
Wiling to sell both seafoo with trailer for $32500.
-
27
Parting out a 2008 RXT X 255. Ecm with keys, Race Lab stage 1 tune $999, throttle body $400, intake manifold $350, fuel injectors $350, stator $300, flywheel $250, starter $200, driveshaft $175, Solas Concord SRX-CD-14/19 impeller $300, Professionally rebuild oem supercharger $999. Shipping available
-
28
StriderXL 12' sit in kayak with free paddle and removable fishing rod holders
$845 with tube frame seat/trolleyCheck us out at www.southwestpaddlecompany.com
1pc Paddle
Deluxe cushion seat2 rod inserts & 2 removable rod holders
Large open storage well at the rear with
bungee tie downs (shown here with the optional hinged cover)
Dashboard storage hatch with nylon liner
Forward hinged storage hatch with bulkhead
Paddle park
Two cup holders
Adjustable foot pegs
Threaded drain plug with o-ring
Two ultra-grip carry handles
Rust resistant stainless steel fittings
Warranty (lifetime parts / 1yr labour)
SPECIFICATIONS
3.83 m (L) x 0.770 m (W) x 0.33 m (H)
12' 7" (L) x 30.3" (W) x 13" (H)
Weight: 31.3 KG (69.0 lbs)
Total Load Capacity: 150 KG (330 lbs)
3.5 mm Linear Low Density Polyethylene (LLDPE) shell
-
29
Various colors available
StriderXL 12' sit in kayak with free paddle and removable fishing rod holders
$845 with tube frame seat/trolleyCheck us out at www.southwestpaddlecompany.com
1pc Paddle
Deluxe cushion seat2 rod inserts & 2 removable rod holders
Large open storage well at the rear with
bungee tie downs (shown here with the optional hinged cover)
Dashboard storage hatch with nylon liner
Forward hinged storage hatch with bulkhead
Paddle park
Two cup holders
Adjustable foot pegs
Threaded drain plug with o-ring
Two ultra-grip carry handles
Rust resistant stainless steel fittings
Warranty (lifetime parts / 1yr labour)
SPECIFICATIONS
3.83 m (L) x 0.770 m (W) x 0.33 m (H)
12' 7" (L) x 30.3" (W) x 13" (H)
Weight: 31.3 KG (69.0 lbs)
Total Load Capacity: 150 KG (330 lbs)
3.5 mm Linear Low Density Polyethylene (LLDPE) shell
-
30
Strider 10' sit-in kayak-various colors, free paddle
$645 plus tax. IN STOCK - available for immediate pickup. Various colors available.This is a 10' sit-in kayak that is a multi-purpose boat. It is great for casual and recreational kayakers but can also be used by those who like to do a bit of fishing while you are out on the water as well.
It comes with a deluxe cushion seat, adjustable foot rests, 2 rod holders, 2 rear facing fishing rod inserts, paddle keeper, 2 cup holders and a free paddle. The kayak weighs 55 lbs and the capacity limit is 250 lbs. It comes with a lifetime warranty on parts and 5 yrs on the hull.
Check out this link to see the various color options available: https://www.kayak-ity-yak.com/colour-palette.html
Check us out on Facebook at Southwest Paddle Company or online at southwestpaddlecompany.com
-
31
Originally off of a Canam Defender.
Maxxis Bighorn 2.0
27 x 9.00 R14
27 x 11.00 R14
$450.00 OBO
Post will be removed if no longer available.
-
32
2018 Yamaha Sidewinder LTX-LE 50th Anniversary Edition
Fox QS3 shocks.
Hi/Lo heated seat, handlebars, throttle.
Factory visor plug.
DuPont slides.
4th wheel kit.
Studs down middle of track.
Serviced by dealer annually.
New ice scratchers and have never been used.
Up North bracket for LinQ accessories.
Medium height windshield and mirrors.6,635 kms, meticulously maintained.
-
33
84 Honda 200 es collection 9. 3 wheelers 1#84 200 es quad one Honda 200 high and low range two Motors the rest high and low range Reverse electric start 3.are ready to go with gas and carb cleaning 4. Gas carb cleaning something else can't remember right now if it was a coil or timing adjustment that one has 250 Big Red Front End price reflects me not putting gas in and carb cleaning if I did that I could get $4,500 for three of them quick actually the one with the high and low range Reverse goes for a little more thanks for 4. Have new pistons and timing chains checking out the ad
-
34
2013 Artic Cat in great shape runs smoothly.
Asking $3500.00
-
35
have a 2020 arctic cat thundercat iact for sale 1 owner bought new has 3200 miles always stored in a heated garage and travels in a enclosed trailer
Reason for sale ive put 300 miles on it the last 2 seasons as i just dont have time anymore.Im looking to trade for a low mile 2013+ arctic cat 600-800 preferably a rr or a r xc or a xrs etec or a polaris assault or pro x or xcr i sont need something this fast anymore
Sled has the following
Super spool hurricane kit 240/270/300 hp on the fly tunes (dash flash)
Dalton weights and clutching
Ggb mountain can (stock aswell)
Gp green cai system
Driveshaft saver from brand new 0 miles on sled
Along with a turbo r performance belt guard since brand new
White technologies linq set up for a linq tank or bag (do not come with sled)
Sleds in immaculate condition no i wont answer lowballers.
Can get more pics upon request
C&a skis and green windshield and hand guards will all be put back to stock before sale.
-
36
11,250 kms New track, electric ohlin rear, fresh rebuild on all shocks from shock tech, factory canvas cover, roller ski wheels,
Asking $5600 obo
-
37
2008 arctic cat 366 4x4, runs and drives as it should. Transmission shifts properly and push buttons 4x4. Fresh belt and oil change. Has an upgraded battery to a truck battery. Needs a front brake line replaced so they are not working right now and seat cover has a few rips. Plastic is good and tires are fair. Steering is tight. Located 20 minutes south of sarnia. Asking $3200 NO TRADES! low ballers will be ignored so please don't waste both of our time.
-
38
New track new sliders chain case oil change rebuilt expansion shock in good shape reason for selling is bought a new one with 13204 k
-
39
‘22 polaris ranger xp 1000 camo 6000 km and using everyday on farm .. reg maintenance. At polaris dealer asking 26250$ windshields soft doors and heat
-
40
Like new condition, 505 miles on it. Original one owner machine. Has factory power steering. Comes with full front windshield and doors and roof.
-
41
Great for a plane, car, ATV or ??? Seat belt tight? Here is the perfect way to extend it a further 27 inches. For holding the Children's car seat or just making it more comfortable for you. Add a couple feet of belt to your existing seat belt. Brand new, never used.
-
42
EZGO 2023 Platinum RXV Gas Golf Cart
U#816G
$9,750.00 plus HST
Open Monday to Friday 8am-4:30pm
Located at 4331 Oil Heritage Rd, Petrolia
519-882-2008 OR 519-312-8873
-
43
Original and not a reprint.
-
44
BRAND NEW Beige 4 Passenger "over the top" Enclosure for Club Car Precedent & Villager with Factory Fairway Top. 2004 and up.
SKU AM1258102
Retail $ 885 NOW $ 450 plus tax
519-312-8873 or 519-882-2008
Open Monday to Friday from 8am-4:30pm
Located at 4331 Oil Heritage Road, Petrolia
-
45
Features & details
• Premium fabric material will not allow rain or water through the material• Blocks sunlight from coming through the fabric, helps wind turbulence
• Covers entire passenger area of vehicle from front seat area back to rear cargo area
• Exclusive cable and spring design compatible with OEM door surrounds or Bestop replacement door surrounds
• Designed to install quickly with windshield channel included
-
46
Original and not a reprint.
-
47
2,044 Miles
*rare*
-
48
40 inches wide, $800 obo
-
49
Front Badge Crest and includes original nut fasteners.
-
50
Original paint- Always stored inside... Ford 4000 1964
New plugs, new wires, new coil July 2022
Recent Filter Lube and Oil/ recent battery
Carburetor rebuilt with kit July 2022
Gas tank removed and professionally cleaned 2021
Hydraulic remote working
Hydraulic lift arms working (with 2 sway bars and cross arm)
PTO working including threaded cover
Original manual
hour metre stuck at ~1300 hours (exact unknown)