2 - Leading Edge Cat 345-352 Volvo EC460-480 Multi-Rippers
Description
BREAKS ROCK AND FROST 4 TIMES FASTER THAN A HAMMER, AT A FRACTION OF THE COST.
WE USED ON OUR EC460 AND EC480-DL VOLVO'S BOTH HAVE 110MM Front Pin 100 MM rear Pin Will work on any pin GRABBER COUPLER FOR 450-500 CLASS EXCAVATOR THAT ACCEPTS 110 MM FRONT PIN OR BUSH PINS TO WHAT YOU NEED TO MFIT 300 - 500 CLASS EXCAVATORS.
ONE UNIT IS AVAILABLE C/W AS NEW CAT PINS INCLUDING RETAINERS - TAKE IT FOR $8,000.00
THE OTHER ONE SHOWN HAS NO PINS - TAKE THIS UNIT FOR $6,000.00.
1 Just sandblasted and painted - OTHER ORIGINAL PAINT
Frank 604-476-7777
Located our yard Langley BC we get fast shipping and great rates.
Rips the sides and bottom of the trench flat with no depth limitation.
The Multi-Ripper is more powerful than a single pointed ripper!
Conventional single pointed rippers are as long as a bucket and have only one tooth! The Multi-Ripper is considerably shorter thus causing the force multiplication effect that can be up to twice the normal breakout force of the machine!
Using the Multi-Ripper
With the stick in the near vertical position, use a combination of bucket and crowd cylinder functions while providing boom cylinder down pressure.
The bucket cylinder action provides the greatest force while the stick sweeps.
Since no two teeth are in alignment, when the Multi-Ripper is rolled, each tooth engages separately so that each tooth fractures the groove cut by the preceding tooth.
Roll the Multi-Ripper completely as the stick is being moved so that all teeth have engaged the material.
The Multi-Ripper is to be rolled as the stick is moved, thus causing a very powerful, fast and effective ripping motion that is easy on the machine and operator.
The ripping action is so powerful that it is very important that the operator take safety precautions against projected objects, especially with brittle materials such as frost and certain rock.
For this type of material, hard hats, safety glasses and an excavator steel mesh windshield guard are all necessary requirements.
Replaces a hydraulic hammer, ripping buckets or designs similar to the LEA DigNRip™ Bucket, or the single pointed ripper.
The Multi-Ripper can replace all hydraulic hammer applications where there is fragmented rock or frozen ground!
For these tough applications, the Multi-Ripper is superior to a hydraulic hammer for the following reasons
The Multi-Ripper is 4 times faster than a hydraulic hammer.
Because the hydraulic hammer has one speed (tink-tink-tink), the amount of material breaking is at one rate.
With the Multi-Ripper, after one tooth breaks out some material, the second tooth is there ready to strike, and then the third.
With the combination of the rolling of the bucket cylinder and the raking of the stick cylinder, the operation becomes very fast.
Many operators have testified that for use in fragmented rock like caliche, limestone, shale, decomposed granite and similar materials, that the Multi-Ripper outperforms the hydraulic hammer 4 to 1!
SEE YOUTUBE VIDEOS
https://youtu.be/VNbEyon7Aww
https://youtu.be/sWx5SMrmk9U
SEE MY OTHER CAT 336 SUPERSTRONG RIPPER TAKE IT FOR $6500.00
- For Sale By: Dealer
- Ad Type: Offering
cars & vehicles | heavy equipment | Other
2023-01-21