Cars & vehicles, Heavy equipment with in Canada.
-
1
2000 FL80 Ex-Fire truck. Only 4300 km and 3800 hours. Cat 3126 and Allison automatic transmission. Absolutely mint condition. Aluminum wheels and nearly new tires. GVW 32,000 lbs. 210" wheelbase and 98" cab to axle.
-
2
ALSO OKADA CONCRETE CRUNCHER C/W REBAR SCRAP STEEL MAGNET AND OTHER ATTACHMENTS LIKE PLATE COMPACTORS ETC
THE CUT 82 IS A UNIQUE PIECE THAT ONLY REQUIRES THE 2 WAY HYDRAULICS THIS MACHINE HAS AS ROTATION IS DONE INTERNALLY WHEN THE JAWS ARE OPENED FULLY - NO ROTATE CIRCUIT IS REQUIRED.
THE NEW COST ON THIS OKADA CUT 82 STEEL - CONCRETE PROCESSOR IS $100,000.00
NOTE: THE CUT 82 AND OKADA CONCRETE CRUNCHER ONLY NEED TO HAVE BUSHINGS PUT IN TO FIT THE PIN GRABBER SYSTEM - WE WILL SUPPLY THE 90MM PINS
OR TAKE THIS LOW-HOUR AS NEW OKADA CUT 82 FOR $50,000.00 AND OKADA CONCRETE CRUNCHER C/W MAGNET FOR $25,000.00 - SEE MY OTHER AD FOR THIS
AND / OR TAKE THE FOLLOWING ATTACHMENTS AND BUCKETS AT GREAT PRICES
FRANK 604-476-7777
ATTACHMENTS THAT ARE DESIGNATED TO WORK WITH THIS UNIT
1) ALLU PM200 ROTARY DRUM SOILS-SLUDGE-COMPOST MIXING TWIN DRUM
2) Xcentric JGXR30 Hydraulic Ripper Breaker Sandstone - Frost - Hardpan - Shale - Cement
3) IMAC / CWS 360 Degree Rotation Tilting Hydraulic Sheet Pile - Matt Grapple - New Unit Extreme Duty Grapple c/w 72 Inch 12000 lb Forks To Work With Sheet Pile Driver (SOLD)
4) Geith 60 Inch 6 Tooth Digging Bucket For 350 Class Excavator
5) 48" Extreme Duty Digging Bucket 5 New Spade Teeth 350-380 Class Bucket c/w Hard Surfacing American Built Quality AR400 Steel Equipment
6) WBM (Weldo Beales) 60 Inch 70 Hydraulic HP Brush - Small Tree Cutter - Grinder 10 Foot Extension c/w Hydraulic Tilt System
7) Helac PT-12 300-370 Class Excavator Powertilt Quick Coupler 120 Degree Rotation New Condition Mounted New Cat 94 Inch 2 Yd Cleanup Bucket c/w Bolt On Cutting Edge
8) Esco 42 Inch Extreme Duty Trenching Bucket c/w AR400 Cutting Edge For Trench Bottom 330-380 Class Bucket c/w Hard Surfacing American Built Quality AR400 Steel
9) Kenco 48 Inch Concrete Slab Bucket C/W Pin Grabber Custom Mount Extreme Duty Bucket For Pulling - Loading - Placing Concrete Slabs - Bridge Deck - Etc (SOLD)
10) New Hensley Adco 66 Inch Ripping Tooth Cleanup Bucket for 350-450 Class Excavators Extreme Duty 66 Inch Cleanup Bucket c/w 11 Ripper Teeth System For Exteme Digging
11) Helac PT-12 134 Degree Rotation c/w 60 Inch Cleanup - Ditching 250-350 Class Excavator
12) New Hensley Adco 30 Inch Trenching Ripping V Bucket for 350-370 Class Excavators Extreme Duty 30 Inch Digging Bucket c/w Ripper Tooth System For Exteme Digging
13) NPK G-18 Hydraulic Concrete Secondary Pulverizer c/w NPK Power Intensifier(SOLD)
14) New TRK 56 Inch Rock - Sandstone - Frost Ripper Custom Built With Replaceable Tooth Canadian Built AR400 Steel Single Shank HD Ripper
15) New TRK V-Cut Stump Excavator Extractor Custom Built With 48 Inches Between Cutters Canadian Built AR400 Steel Stump Extracor - Root Cutter
16) Simex TF2000 Rotary Rock - Shale - Concrete Drum Cutter 350-500 Class Excavator Mount Simex TF cutter heads are ideal for trenching, profiling and resurfacing rock and cement
17) Simex TF2000 Rotary Large Stump Drum Cutter 200-370 Class Excavator Mount Simex TF Stump 66 Tooth Wood Cutter Heads For Grinding Stumps - Wood Waste Equipment
18) Eskridge Model 77 Helical Pile and Digger Drive For Installing Helical Piles - Digging Pole Holes Double Planetary, Output Torque, 6,500 to 12,000 FT.-LB, Two-Speed, Automatic
19) MP MCcAFFREY 24 INCH TO 72 INCH 2.5 Yard V-Trenching Bucket Quality AR400 Steel American Built V Bucket c/w Pipe Tip For Legal Excavated Trenching
20) FELCO 16000 FT LB BUCKET PLATE COMPACTOR C/W NEW HOSES - SET UP FOR THIS MACHINE
AND MUCH MORE - SEE MY OTHER ADS FOR MORE DETAILS ON THESE UNITS
ONLY SELLING AS DECIDING TO RETIRE AND LEAVE BC DUE TO THE SMOG IN THE VALLEY FOR HEALTH REASONS
FRANK 604-476-7777
-
3
High lift, Hardox box, Alluminum wheels
-
4
Trailer 53 feet 3 axel Manac
For Sale or Rent!
Short or long term.
Storage available.
Financing available $ per month.
Good condition
Ready for work
Manac 2007
Call 778-320-9750 Alex
-
5
2008 hino 3 ton
495km
Ready for work auto matic transmission
Obo
-
6
bobcat s570
got solid tyres on it.
comes with 4 set air tires and bucket.
got a/c and heated cap.
both controled feet and hand.
-
7
Perske Rotary convertor 15/25 kva
-
8
LOW HOUR 2019 22000 LB MINING SERIES LITTLE USED RIPPER FOR ROCK - SHALE - SANDSTONE WAS ON PC650 KOMATSU
PERFECT FOR GOLD MINERS FOR THE TOUGHEST PERMAFROST ON SLOPES AND HILLS WHERE YOU CRAWLERS CANNOT ACCESS
BUILT JUNE - 2018 IN ITALY BY XCENTRIC RIPPER SERIAL # 18062501 - CLEAR TITLE READY TO WORK
SEE THE PDF FILE INSTRUCTION MANUALS FOR ALL DETAILS - COPY AND PASTE:
https://www.shearforce.ca/wp-content/uploads/XR-MINING-SERIES-Instruction-Manual.pdf
https://bossattachments.com.au/wp-content/uploads/2020/05/boss-au-xcentric-ripper-xr.pdf
https://xcentricripper.com/wp-content/uploads/2019/05/FICHA-RIPPER-XR82_ENG.pdf
http://www.dbflimited.com/Resim/Upload/miningseriesripperenglish1.pdf
The XR82 key features as per Xcentric:
• Suitable for 70t-90t Excavators the XR82 weighs in at 10,000kg (WILL WORK ON 600 OR 650 CLASS WITH SHORT STICK)
• 5 times higher production than conventional rock breakers
• A safe and easy alternative to drill and blast options
• New slim body design makes the XR Mining series perfect for trenching applications.
• Minimum noise levels
• Minimum maintenance
• No daily lubrication required
• Minimum wear parts consumption
• Long life components and materials
• Less fuel consumption per produced m3/ton
• Less emission per produced m3/ton
• Environmental protection (Bio Lubricants)
• Marine/underwater operation.
• Can be used on standard excavators.
• Increase operator comfort.
• HARDOX® & Strenx construction ensures long-lasting durability in extreme conditions.
• Designed and manufactured in Spain by Xcentric International, only the best materials are
used for excellent quality. Solid, durable and characterized by the now recognizable clean lines
designed to resist wear and high stresses in the toughest working conditions.
• Extreme compactness and low center of gravity improves balance and drastically reduces the
strain on the excavator arm, eliminating impact vibrations.Introducing the Xcentric Ripper® hydraulic ripper. A revolution in high volume excavation and demolition.
After more than 10 years development in the design and manufacture of the worlds most productive, reliable, and technologically advanced hydraulic ripper, Xcentric International has taken the Xcentric Ripper range to a whole new level with the release of the all new Xcentric Ripper Mining Series.
The Xcentric Ripper® outperforms traditional hydraulic hammers in nearly every type of material, particularly in medium hardness rock with natural fracturing and layers. Using patented Impact Vibration Accumulation Technology, the attachment works with the natural rigidity of the rock, and the vibrations that are produced shake the material to deepen cracks for easier breakup. It is an exceptional tool for frozen ground excavation, demolition, rock excavation, slag recycling, dredging, trenching, underground mining, and even underwater applications.
XR mining series range
• Easy operation with low noise.
• Unbelievable power and versatility.
• Easy on your machine’s pins and bushings.
• Low maintenance.
• Field replaceable ripper teeth.
• Patented impact vibration accumulation technology.
• A safe, easy, and environmentally friendly alternative to drilling and blasting options.One of our customers in the pile and dredging industry was searching for an excavation tool that could be deployed for a three-month project which included the removal of more than 40,000 yards of basalt from a shoreline to make way for a new harbor and breakwater for incoming marine traffic.
The superintendent saw video of the new Xcentric Ripper Mining Series working online and decided to give the new more powerful version of the hydraulic ripper a chance to prove it belonged in their arsenal of excavation tools.
“We have the XR82 model working on one machine and a clam shell bucket for dredging on the other,” he said. “We needed a tool that would work well under water and the XR82 has performed to our expectations so far. I see it proving valuable as an asset in our equipment fleet and working really well on some of our more specialty projects.”
Mining Series Design Improvements
While the working technology is based on the standard series, the new Mining Series has been reinforced with a remodeled working platform, which delivers a much higher energy impact force to the work tool with a lower frequency. Larger and heavier eccentric gears are now machined from a single billet of steel and precisely designed to allow for equal weight distribution side-to-side and direct impact energy vertically.
The lower pivot arm and housing is reinforced to limit wear where the ripper typically encounters material, and the ripper arm or beak has been remodeled and reinforced with Hardox® steel. The XR Mining Series also has a narrower body profile, making it ideal for tunneling or operating in confined areas.
Designed to increase production, at lower operating costs and reduced noise levels, the all new XR Mining Series is a revolution for high volume rock excavation. Like the regular series that came before it, the Mining Series will be an invaluable tool for frozen ground excavation, rock excavation, quarrying, surface and underground mining, oil sands excavation, utility project installations, pipeline trenching, demolition, slag recycling, dredging, and even underwater applications.
Visit the Xcentric Ripper page:
https://www.shearforce.ca/equipment/xcentric-ripper/ to learn more and watch video of the Xcentric Ripper® Mining Series in actionWATCH THE VIDEOS COPY AND PASTE:
https://youtu.be/C3LLh0fSjk4
https://youtu.be/Z_dNJYRlpyg
https://youtu.be/G3lSGXuxv9s.
FRANK 604-476-7777
-
9
Cummins isx
$35 000
For more info call me at
6045374950
-
10
This little thing is fantastic. Saved us tons on trenching but no longer need it. Has upgraded pump, hoses, log grappler attactment and more. Runs great and probably has less that 25 hours on it. Looking to buy compact farm tractor so open to those kinds of trades. These are getting harder to get and will probably go up in price this year. Last year had a long wait list. Asking 4200obo for everything. Grappler not in photos.
-
11
37.8m3
just hauled water so it’s clean.
Haul water for cows
it is a 407 spec tank and asking $28,000 OBO.
Cvip and tank inspection is expired
Call 780-898-3031 for more details
-
12
2014 Deloupe 65 Ton Hydraulic RGN 10 Axle Combination
Freshly Blasted and Painted Overall trailer length 64’ (with neck extension)
Working lower deck length 27’ Deck width 10’ Lower deck height 30in. Deck to
bolster height 14in. Neck Length 8’ w 16in. & 40in. pin setting 6’ neck extension with
16in. pin setting Hydraulic assist flip over neck Diverter valves Chain tie down
pockets Plastic fenders between bolsters 4’ beavertail Fish mouth booster 60in.
axle spacing Air ride suspension 275 70R22.5 tires on aluminum uni-mount rims
Drum brakes Oil bath hubs LED lighting with 16in. swing-out light extensions Come
by and check out our wide selection of hauling products and accessories in our
showroom. We have the parts you need at the price you want.
-
13
1280 Hours.
Hi flow, Heat / AC.
Full service completed - all oils and filters changed.
Machine is very clean and ready for work.
Comes with smooth bucket. Pallet forks available.
-
14
Purchased brand new in 2017
In good condition
Has not been used the last 2.5 years
-
15
92 Inch Snowblower, 3 point hitch mounted, Manufactured by Barfoot’s Welding and Machine. Very low hour unit as you can see much of the paint is still on the auger parts. Unit has 2 shear pins to protect itself from damage. I have used it with a 60 Hp tractor and it works very well. Snow shoot turns from left to right with a hydraulic cylinder. Hydraulic cylinder not included.
-
16
****FREE 1 YEAR PRIDE EXTENDED WARRANTY OR 50% DOWN PAYMENT MATCH OR 6 MONTHS NO PAYMENT** In-house Special financing offer by TPine for Work Permit Holders and First-Time Buyers (No matter where you buying Private, Fleet, Any Dealer or Re-financing)*. Contact us for Special Fleet Rates. No matter Dollar Amount of the deal, We GUARANTEE rate beat*. NO Financial Covenants pains. For 100% Guaranteed Approval Call Now @ our 24/7 helpline 1.8.6.6.7.4.3.3.2.4 (1-866-PRIDE-24). 7 Days-a-week Same Day Approval. EXTENDED WARRANTY Available up to 1,000,000 kms*. All our trucks are DOT Ready with Fresh Oil Changes. We pay top dollar for your equipment either Trade or Sale. PRIDE is your cross border one-stop-shop for all your trucking and financing needs serving you in Multiple Languages across North America. With 37+ locations across North America & GROWING, we are the LARGEST USED TRUCK DEALER, CHOOSE FROM 1000s of in stock units. Pride Truck Sales carries a diverse late model premium inventory including Sleepers, Day cabs, Reefers, Dry vans, and heated units of all makes and models such as Freightliner, Volvo, Mack, Kenworth, Peterbilt, International, Thermo-King, Great Dane, Manac, Utility and many more. Please ask our sales team about following In-House products and services: ...PRIDE Extended warranty plans for New and Used trucks ...PRIDE 24/7 In-House Road-Side Service and Assistance Helpline ...In-stock Parts Delivery across North America for all Makes & Models ...PRIDE Fuel Card Program ...PRIDE Factoring/ABL Product ...PRIDE Contract Fleet maintenance plan ...PRIDE Short Term Rental, TRAC Lease, All in cost Full Maintenance Lease plans starting from 25 cents, New Truck Replacement Every 1-2 Years (Disclaimer: Although Our Online marketing team has made Substantial effort to provide accurate and complete information on this Web site, please contact one of our Qualified professional sales team members to verify availability / Pricing / Specifications of the information online. *Conditions Apply.). Vehicle Information Provided by autoTRADER.ca
-
17
In Stock
Replacement conveyor Chain for Fisher RC 8foot box part No 1451110 OEM#9177
123 links PL 662 chain
Center to Center sprockets 10-1/2"
41 cross bars 3/4"x1/4" every 5"
We manufacture conveyor chain for every Brand
You also can look up the other ads or go to
Mobotechwelding/chain
780-862-9869
-
18
Options:
HIAB X s244 HIPRO
Picker Truck
30'' Sleeper
9 ton Crane
Out Riggers
Tool Boxes for Chains, Boomers
WABSTO
Lift Capacity 84,000 KG
Beacon Lights
Chain Hangers Work Lights
Twin Steering
Ace Head Ach Rack
5 Stage Picker
Upper Deck tool box
. Vehicle Information Provided by autoTRADER.ca
Western Truck & Trailer is an AMVIC Licensed Dealer
-
19
Looking for liquid manure spreader
Please message what you have
-
20
514-328-2300 Parking lift / Machine a pneu / Lift de garage Car Lift lift automobile verin pont elevateur
MONDIAL AUTOMOTIVE EQUIPMENT, lift auto GP-9 a deux colonnes Asymétrique de 9000 lbs de capacité. - Vérin à cylindres double et à chaînes haute capacité. Poulies en acier et système de câbles égalisateurs. - Les adaptateurs de camions sont inclus. - moteur/pompe de 3 hp - 220 volts . - La hauteur du lift est de 142". - La largeur hors tout est de 132''. - La hauteur de levage est de 79''. - Garantie pour 1 an piece 5 ans structure.****Services de livraison et d'installation disponible****
Nous avons toutes les pièces de rechange en stock et de techniciens disponibles pour réparer les machines.
Verin A’ DEUX COLONNES 9,000lbs GP-9 POUR VOITURE ET CAMIONETTE
• Capacité de levage en mode asymétrique, conçu en colonnes symétriques.
• Levier de déverrouillage des barrures sur chaque colonne.Garantie de 1 an sur les pièces et 5 ans sur la structure.
Nous avons toutes les pièces de rechange en stock et de techniciens disponibles pour réparer les machines
Pour plus d'informations contactez-nous Tel:514-617-1519
Adresse
Grand Prix Import
8275 17th Avenue
MONTREAL,QC
H1Z4J9
-
21
Tracteur Kubota L3540D
4 roues motrices (4 x 4)
Moteur 37HP diesel
Transmission hydrostatique (Hi- Medium - Low)
Année 2007
3 315 heures
2 sorties hydrauliques ( 2 IN + 2 OUT)
En très bonne condition.
-
22
We ship anywhere in Canada and USA.
Nous livrons partout au Canada et aux États-Unis.
Moteur : Mercedes MBE4000 370HP, Trans : 10 spd, Essieux : 20000 (lbs) / 40000 (lbs) (full lock), Sus : Air, CA : 164, WB : 229, Pneus avants : 425, (75%), Budd alu, Pneus arrières : 11x22.5, (75%), Budd alu, Odomètre : 556858km. - Engine : Mercedes MBE4000 370HP, Trans : 10 spd, Axles : 20000 (lbs) / 40000 (lbs) (full lockers), Sus : Air, CA : 164, WB : 229, Front tires : 425, (75%), Budd alu, Rear tires : 11x22.5, (75%), Budd alu, Odometer : 556858km.
Contact us --- info@camionsgilbert.com --- gilberttrucks.com
Contactez-nous --- info@camionsgilbert.com --- camionsgilbert.com
-
23
We ship anywhere in Canada and USA.
Nous livrons partout au Canada et aux États-Unis.
Description Française: 12 Roues (Twin-Steer Truck) Moteur : Detroit DD13 450HP, Trans : Eaton Fuller, Essieux : 32000 (lbs) / 46000 (lbs) (full lock), Sus : Air, CA : 214, WB : 273, Pneus avants : 315, (75%), Alu Budd, Pneus arrières : 11 x 22.5, (50%), Alu Budd, Odomètre : 873135km, Statut : Aucun, Autres informations : Moteur refait à 581 880 KM, Radiateur neuf, changé le 07-21. Deuxième essieux avant: Simard English Description: Engine : Detroit DD13 450HP, Trans : Eaton Fuller, Axles : 32000 (lbs) / 46000 (lbs) (full lockers), Sus : Air, CA : 214, WB : 273, Front tires : 315, (75%), Alu Budd, Rear tires : 11 x 22.5, (50%), Alu Budd, Odometer : 873135km, Brand : Aucun, Other infos : Rebuilt Engine at 581 880 KM, Brand New Radiator, changed on the 07-21. Second front axle : Simard Video: https://youtu.be/VJB2__9to9E
Contact us --- info@camionsgilbert.com --- gilberttrucks.com
Contactez-nous --- info@camionsgilbert.com --- camionsgilbert.com
-
24
514-328-2300 Pour nous rejoindre / Machine a pneu / Lift de garage Car Lift lift automobile verin pont elevateur
Ciseau Lift MR-06 disponible Installation et livraison disponible NEUF + GARANTIE + SERVICE Meilleur Qualite avec le meilleur service apres vente
Spécification; Capacité 6,000 LB
Hauteur de levage maximale de 60'' (5pied) longueur 81'' (6 pied,9'')
Largeur 40'' (3 pied, 4'')
Hauteur de bras 4''
Moteur 110V
Garantie de 1 an sur les pièces et 5 ans sur la structure.
***Services de livraison et d'installation disponible****
****************************************************************
Nous avons toutes les pièces de rechange en stock et de techniciens disponibles pour réparer les machinesPour plus d'informations contactez-nous Tel:514-328-2300
Adresse
Grand Prix Import
8275 17th Avenue
MONTREAL,QC
H1Z4J9
-
25
Chargeuse à billots avec mât de 16½ pieds
Marque : Arbro-Lift , Filiale de Patu (Kesla)
Modèle : 505
Fabrication haut de gamme finlandaise
Contrôle avec Joystick.
Grappin (Clam) 360 ° à rotation continue s'ouvre jusqu'à 50 pouces,
Remorque : Longueur = 255 pouces de long et 88’’ de large
Chargeuse et trailer Heavy Duty
En très bonne condition.
Chargement : 185 pouces de long et 75'' de haut; 62’’ de large x 60'' de haut dans le haut et 34’’ de large x 9 de haut dans le bas.
-
26
Gratte a neige MEYER SV2 de 9'-6'' de large, avec manette. Gratte en excellente état, a voir !
-
27
We ship anywhere in Canada and USA.
Nous livrons partout au Canada et aux États-Unis.
Description Française: Moteur : 350 à Gaz 350HP, Trans : 5 vitesses, Sus : Ressort, Autres informations : Boîte 18', Brake à l'huile. English Description: Engine : Gaz Engine 350HP, Trans : 5 vitesses, Sus : Ressort, Other infos : 18' Box, Oil Brake. Video: https://youtu.be/UIOzZBqo-pQ
Contact us --- info@camionsgilbert.com --- gilberttrucks.com
Contactez-nous --- info@camionsgilbert.com --- camionsgilbert.com
-
28
We ship anywhere in Canada and USA.
Nous livrons partout au Canada et aux États-Unis.
Description Française: Moteur : Cummins NTC 350HP, Trans : Eaton Fuller, Essieux : 14000 (lbs) / 44000 (lbs), Sus : Ressort, CA : 142, Pneus avants : 11 x 22.5, (50%), Spoke, Pneus arrières : 11 x 22.5, (30%), Spoke, Odomètre : 653286km, Statut : VENDU TEL QUEL, Autres informations : Équipement d'incendie Levasseur année 2000. English Description : Engine : Cummins NTC 350HP, Trans : Eaton Fuller, Axles : 14000 (lbs) / 44000 (lbs), Sus : Ressort, CA : 142, Front tires : 11 x 22.5, (50%), Spoke, Rear tires : 11 x 22.5, (30%), Spoke, Odometer : 653286km, Brand : VENDU TEL QUEL, Other infos : 2000 Levasseur Fire Equipment.
Contact us --- info@camionsgilbert.com --- gilberttrucks.com
Contactez-nous --- info@camionsgilbert.com --- camionsgilbert.com
-
29
We ship anywhere in Canada and USA.
Nous livrons partout au Canada et aux États-Unis.
Moteur : International DT530E 300HP, Trans : 8LL, Essieux : 18000 (lbs) / 40000 (lbs) (full lock), Sus : Spring, CA : 187", WB : 256", Pneus avants : 315, (80%), Spoke wheels, Pneus arrières : 11x22.5, (50%), Spoke wheels, Odomètre : 171987km, Statut : Aucun, Autres informations : Boom Atlas AK220.1.V A200, 45', plateforme 21'x102''. - Engine : International DT530E 300HP, Trans : 8LL, Axles : 18000 (lbs) / 40000 (lbs) (full lockers), Sus : Spring, CA : 187", WB : 256", Front tires : 315, (80%), Spoke wheels, Rear tires : 11x22.5, (50%), Spoke wheels, Odometer : 171987km, Brand : None, Other infos : Boom Atlas AK220.1.V A200, 45', 21'x102'' flatbed.
Moteur : International DT530E 300HP, Trans : 8LL, Essieux : 18000 (lbs) / 40000 (lbs) (full lock), Sus : Spring, CA : 187, WB : 256, Pneus avants : 315, (80%), Spoke wheels, Pneus arrières : 11x22.5, (50%), Spoke wheels, Odomètre : 171987km, Statut : Aucun, Autres informations : Boom Atlas AK220.1.V A200, 45', plateforme 21'x102''. - Engine : International DT530E 300HP, Trans : 8LL, Axles : 18000 (lbs) / 40000 (lbs) (full lockers), Sus : Spring, CA : 187, WB : 256, Front tires : 315, (80%), Spoke wheels, Rear tires : 11x22.5, (50%), Spoke wheels, Odometer : 171987km, Brand : None, Other infos : Boom Atlas AK220.1.V A200, 45', 21'x102'' flatbed.
Contact us --- info@camionsgilbert.com --- gilberttrucks.com
Contactez-nous --- info@camionsgilbert.com --- camionsgilbert.com
-
30
Tire changer TC-325 TEL: 1-800-361-4095 **** Tire Machine MONDIAL TC-325 with bead blaster and internal air tank at combo with balancer Swing arm Tire changer • It allows to remove and install tires up to 24 "in wheel diameter • Plastic inserts are provided to protect the alloy wheels.
- One year warranty on parts. We have all spare parts in stock. -Transport service and delivery available across Canada
-4 post parking lifts available Other garage equipment available.
For more information contact us Tel: 1-800-361-4095 Address 8275 17th Avenue MONTREAL, QC H1Z4J9
-
31
Tire Machine & balancer Combo 1-800-361-4095 They are in stock and we ship Canada wide, Grand Prix Import has been selling Quality Automotive Equipment since 1977 in the Canadian market !!!!!!!!!!!!!!
MONDIAL TC-325 Balancer WB-255
TC-325 Swing arm Tire changer with Bead Blaster It allows to remove and install regular tires up to 24 "in diameter. Help arm for runflat/low profile tires is available as an option Plastic inserts are provided to protect the alloy wheels.TC-325 Specifications
Rim clamping outside 10"-22"
Rim clamping inside 12"-24"
Motor: 2HP, 15 AMPS, 120V/60Hz
Maximum Tire Diameter 41"
Wheel width:3’’-15"
Operating pressure 115-145 psiWB-255 wheel balancer can support rim size from 10" to 24", tire size up to 34", perfect for home use or business.
Rim diameter: 10"-24"
Max tire diameter: 1000mm
Tire width: 15"-16"
Balance precision: 1g
Motor: 110V- One year warranty on parts. We have all spare parts in stock.
-Transport service and delivery available across Canada, delivery fees applies.Adress
GPI
8275 17th Avenue
MONTREAL,QC
H1Z4J9
-
32
We sell Tire changers Balancers Hoist and other garage equipment and they are in stock and we ship Canada wide 1-800-361-4095 Grand Prix Import has been selling Quality Automotive Equipment since 1977 in the Canadian market .
MONDIAL AUTOMOTIVE EQUIPMENT, GP-9L is is one of the most affordable floor plate car lifts built with quality materials and good workmanship. The lift has a strong double "S" column design to support 9000 Lbs capacity. Its an asymmetric lift - Double cylinder, Steel pulleys and equalizing cable system. - Truck adapters are included. - motor / pump 3 hp - 220 volts. - The height of the lift is 9'4 "-
Combo (Symmetrical and Asymmetrical) Arm Assembly
Straight Front/Rear 3 Stage reach from 22 7/8" to 42 5/8"
Straight Rear 2 Stage reach from 33 5/8" to 52 7/8"
Screw-in pads 4 pieces included
Truck adapters 4 pieces included
Double point safety lock release
Automatic arm lock restraints
Relief valve built in power pump to prevent overloading
Door guards protection rubber
Up-limit switch to protect cylinders working stroke used in safe length scope
Heavy duty 3/8" diameter cable and 5" pulley that reduce high stress on synchronization process and increase cable life
Upgraded Floor Plate, Beveled Diamond Plate Steel 5/32" with Supporting Bracket.
Ultra high molecular self lubricating nylon slider that ensures carriage smooth moving up and down
Lifting operation by pressing "UP" button on motor
Manual lowering operation by pressing lever
Relief valve built in power pump to prevent overloading
Overall Height: 113 5/8"
Overall Width: 134 5/16"
Maximum Lift height with Truck Adapters: 81"
Maximum Lift height without Truck Adapters: 75"
Minimum Height of Arm Top: 4"
Carriage to Carriage Width (Drive through clearance): 100"
Column to Column Width: 109"
Column Cross Section: 11"L x 7"W
Floor Plate Cross Section: 10 5/8"W x 1 7/8"H
Driving Mode: Dual hydraulic cylinders, chain drive
Motor: 220V Single Phase 3HP 10A (recommend a 30A breaker)
Hydraulic Oil: 3-5 gallons AW32/AW46
Lifting Capacity: 9,000 LB
Time to full rise: 50 sec
Concrete Requirement: 6" thick at 3500 psi reinforced with fiberglass or steel (4" thick for vehicles 9000LB and below)
Anchor bolts/mounting hardware included
Tool trays and toe guards included- Warranty is 1 year on parts and 5 years on the structure.
-Transport service and delivery available across Canada
See my other ads !!!!!!1 year warranty on parts and 5 years on structure.
For more information contact us Tel:1-800-361-4095
Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
33
NEW Genie GTH-5519 Telehandler For Sale
** IN STOCK IN BC! Easy delivery options available to the NWT!**
5,500 Lbs Max Lift Capacity | 18 Ft 10 Inch Lift Height | 4×4 | Diesel | 2 Way, 4 Way & Crab Steering | Foam Filled Tires | Enclosed Cab with Heat & A/C | Manual Genie Quick-Attach | 48″ Wide Fork Carriage with 48″ Forks | Work Light Package | Full Manufacturer's Warranty
Lease to own this Genie GTH-5519 for as low as $1,950 per month. *OAC
We are a Genie dealer and sell all their equipment and parts.
If you need more information please contact us ANYTIME Toll Free: 1-877-450-8003
See more details and equipment at: www.Zuma.ca
Additional Genie GTH-5519 Details:
Comfortable, spacious cab with tilt steering and ergonomic controls
Easy-to-use, multifunction joystick control for precise positioning
(ISO compliant), retractable seat belt and illuminated gauge and switch panels
Full-time planetary four-wheel drive and four-wheel steer
Proportional, reversible, continuous auxiliary hydraulic flow
Variable-speed hydrostatic drive
Power-assisted steering
Manual Genie Quick-Attach™ system for attachments.
.
Other search Terms: forklift, reach forklift, gehl, jlg, jlg g5, jlg g5-18a, genie 5519, genie gth5519, terex tx5519, terex 5519, small telehandler, zoom boom, small zoom boom, skyjack, cat, caterpillar, manitou, merlot, snorkel,
-
34
Auto Hoist Car Lift Tire machine changer Parking lift Wheel balancer They are in stock and we ship Canada wide, Grand Prix Import has been selling Quality Automotive Equipment since 1977 in the Canadian market .Tel: 1-800-361-4095 The MONDIAL MR-06 is a 6,000-lb. portable lift with a 52" lifting height(60" with truck adapters) that comes loaded with adjustable arm assemblies, a safety lock bar with multiple lock positions and a free set of truck adapters. This MR-06 is a mighty 6,000-lb. capable mid-rise scissor lift thats designed to fit nicely into narrower bays and wont take up your precious floor space. The mid-rise lift is absolutely perfect for detailing vehicles, wheel service, brake work, as well as an ideal lifting solution for DIY enthusiasts and hobbyists who enjoy taking care of cars in their home garage.
Lifting Capacity 6,000 lb
Power Unit 110V
Length 102"
Width 40"
Min Height 5.5"
Max Height 60" with truck adapters
Warranty is 1 year on parts and 5 years on the structure.
National Shipping Available Can be picked up at the local terminal, Delivery fee's apply please contact us for details .at 1-800-361-4095
See my other ads !!!!!!We have all spare parts in stock
1 year warranty on parts and 5 years on structure.
For more information contact us Tel:1-800-361-4095
Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
35
2017 Multiquip DCA 25 kw Generator
- 3300 hours
- Isuzu engine
- Trailer mounted
- Very good condition
- Load banked & serviced
$32000.00
West of Lacombe, Ab.
6kw generator
8kw generator
10kw generator
15kw generator
20kw generator
35kw generator
40kw generator
45kw generator
50kw generator
55kw generator
60kw generator
65kw generator
70kw generator
75kw generator
80kw generator
85kw generator
90kw generator
95kw generator
100kw generator
105kw generator
110kw generator
115kw generator
120kw generator
Stand by generator
Towable generator
Job site generator
Trailer generator
Back up generator
Off grid generator
John Deere generator
Kubota generator
Cummins generator
Gen Set
Portable Power
Portable Generator
Mobile Generator
Diesel Generator
Generator
Diesel Generator
Gen Set
Generator
Magnum
Generac
Cummins
Light tower
Light plant
Whisperwatt
Backup generator JLG , Genie , Caterpillar , D9 , Hitachi , Kubota, Doosan, Wacker neuson , John deere , Isuzu , Bobcat, Grader , 140G , Komatsu , Bell , 140H , DOZER , CAT, JLG , Genie , Caterpillar , D9, D9T , D6 , Hitachi , Kubota, Doosan, Wacker neuson , John deere , Isuzu , Bobcat , Bomag , Hamm , Skyjack Backup power, Standby generator ,Construction, generator, Light plant, Light tower Wacker , Mq, Multiquip , Teresa, Caterpillar , Cummins ,Isuzu, Genrac, IR, Honda, Yamaha , Mitsubishi ,John Deere, Dewatering, bulldozer , skidsteer
-
36
Tire changer car lift Parking lift Wheel balancer They are in stock and we ship Canada wide 1-800-361-4095 Grand Prix Import has been selling Quality Automotive Equipment since 1977 in the Canadian market .**Tire changer • It allows to dismantle and mount tires on steel and alloy wheels up to 21"in diameter • Plastic protectors are provided to for the alloy wheels.
- One year warranty on parts. We have all spare parts in stock. -Transport service and delivery available across Canada
-4 post parking lifts available Other garage equipment available.
-Transport service and delivery available across Canada
See my other ads !!!!!!
For more information contact us Tel:1-800-361-4095Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
37
Heavy truck - # STOCK: C-33586
2021 PETERBILT 389 CAMION CONVENTIONNEL AVEC COUCHETTE
2021 PETERBILT 389 HIGHWAY SLEEPER TRUCK TRACTOR
THE VEHICLES ARE LOCATED AT:
609 PRINCIPALE, SAINT-PAUL-DE L’ÎLE-AUX-NOIX, QUÉBEC, J0J 1G0
Engine: PACCAR MX-13
Liters: 12.9 litre
HP: 510 hp @ 1600 rpm
Odometer: 438,650 KM
Transmission: EATON-FULLER RTLO-18918B
Speeds: 18
Front axle: 12,350
Rear axle: 40,000
GVWR: 52,350 lbs
Suspension: PACCAR
Tires: 11R22.5 11R22.5
Wheels: ALUMINIUM ALUMINIUM
Brakes: AIR
Wheelbase: 280
CA: 108
Spead: 52
Frame: SIMPLE
Financing available on site
Engine: Paccar MX-13
-
38
Topcon FC-6000 with HiperVR Rover & Base
WE SHIP DIRECT TO YOU, USA and Worldwide!! Financing Available
• Stock Number: 6838 JP
• Located in South Central Alberta
• 1- HiperVR Base with Antenna
• 1-HiperVR Rover with Antenna
• 1-FC-6000 Data Collector
• 1-HiperVR Charging Cable
• 1-FC-6000 Charging Cable
• 1-Tripod Base
• 1-2m Rover Pole
• Contact us today if you need more information. • JPH Equipment • Buying Made Simple • We Ship Worldwide •
We do not guarantee that these specifications are error-free or fully complete. The above specifications details are provided as a reference only and should be confirmed prior to purchase.
***** Machines are located all across Western Canada. Please call to confirm location *****
**Please leave a telephone number on all enquiries as replies may be filtered to junk email**
-
39
We have a 2014 maxi flat bed step deck available (rear lift axle) the trailer has its full inspection done kingpins all replaced,new landing gear,compression system,all new tires including lift axle. There are a lot of other goodies available in this trailer. This is a perfect highway trailer for Canadian and also cross border travel. Please feel free to send a text or email to get further information. TEXTS ONLY
-
40
Rayco C87FMXP
Tutn a key mulcher
New yamar motor at 2000hour
runs and works good
5300hours
125hp yamar
Extra engine and hyd cooler
All new teeth
Pumps are strong
A/C and heat
No vibrations
Pins are solid
18000lbs winch warn
90%left on undercarriage
New bearings in mulcher head
Balanced head780226
Bobcat, CAT, Kubota, John Deere, SVL95, SVL75, E55, E45, KX 040, International, Skidsteer, Skid Steer, Mini, Mini-Ex, miniex, mini excavator, excacator, Kubota, John Deere, Deere, Compact Track Loader, Loader, Track Loader, Excavating, Low hours, Low time. Clean, 26G, 35G, 50G, E26, E35, E42, E45, 303.5, 304, T650, T770, T870, T595, T590, SVL 75, SVL95, SVL95-2S 259, U55, 305.5, 308, KX, KX057, KX040, U35, 289, 299, Tracks, Tracked Machine, Tracked Skid steer, Takeuchi, Mulcher, New Holland, Case, Case Construction, Farmall, New Holland, 85C, T4.100, T4.75, Loader tractor, Front end loader, Mahindra, Kubota, Kioti, 333G, 331G, SVL97, Land management, D3, D3XE, 299D3, FAE, Mulcher, FECON, Denis Cimaf, Stump Grinder cmi rayco prime tech
-
41
Mercedes Diesel Engine with Chevron 10,000lbs sliding deck. Good truck and gets regular service and only used for delivering empty 20' containers. Tires were new in 2021. Still has lots of life left.
Call Troy at 780 288 0675
-
42
This thumb came off our 2020 Case CX210D, the thumb has never been used. New this is $14,000.00, i am asking $8900.00 OBO
-
43
Fits any D7 or D6
LGP, XR/XL
NOT WORN OUT JUNK!
Selling as new condition!
If your reading this you already know what the auction garbage sells for $$$! + commission!
$9500.00
7806899393
-
44
3pt Bale Spear
-
45
Heavy truck - # STOCK: C-33617
2013 MOFFETT M5 50.4 MOFFETT M5 50.4 FORKLIFT CHARIOT ÉLÉVATEUR
2013 MOFFETT M5 50.4 MOFFETT M5 50.4 TRUCK MOUNTED FORKLIFT
THE VEHICLES ARE LOCATED AT:
609 PRINCIPALE, SAINT-PAUL-DE L’ÎLE-AUX-NOIX, QUÉBEC, J0J 1G0
Engine: KOHLER
Liters: 2.48 litre
HP: 48 hp @ _ rpm
Transmission: HYDROSTATIQUE
Tires: 29X12.5-15 NHS 29X12.5-15 NHS
Wheels: ACIER STEEL ACIER
Financing available on site
Engine: Kohler
-
46
2018 FORD F-550 SERVICE TRUCK with NEW SERCICE BOX, CRANE
NEW ARRIVAL...
Amvic Licenced...
- NEW SERVICE BODY - 12' LONG x 8' WIDE x 60" TALL- NEW COBRA 3800 CRANE,
-RED DOT R254 HEATER
- HOSE REEL
- VMAC
- 123,068 KMS
- Call Now: 780-705-8780
Visit us online: www.jeetautosales.ca
Get Preapproved: https://www.jeetautosales.ca/apply-for-credit/
Address: 7020 50 Street NW Edmonton. Alberta
Open 7 days a week
Hours of Operation: Monday â?? Friday 9am till 7pm
Saturday: 9am till 5pm.
Sunday: Noon till 5pm
-
47
Tire changer TC-325 TEL: 1-800-361-4095 **** Tire Machine MONDIAL TC-325 with bead blaster and internal air tank at combo with balancer Swing arm Tire changer • It allows to remove and install tires up to 24 "in wheel diameter • Plastic inserts are provided to protect the alloy wheels.
- One year warranty on parts. We have all spare parts in stock. -Transport service and delivery available across Canada
-4 post parking lifts available Other garage equipment available.
For more information contact us Tel: 1-800-361-4095 Address 8275 17th Avenue MONTREAL, QC H1Z4J9
-
48
60 plate hydraulic fold discs discs r in good shape and all hydraulic hoses replaced recently. Needs some tlc before the field this spring. Got scrappers and brackets to go with. Just upgraded in the tillage department and don’t need this tool anymore.
-
49
NEW 1-800-361-4095 **** 2021 ******* GP-9 MONDIAL AUTOMOTIVE EQUIPMENT, GP-9 is an assymetric lift with 9000 lbs capacity. - Double cylinder,Steel pulleys and equalizing cable system. - - motor / pump 3 hp - 220 volts.
Combo (Symmetrical and Asymmetrical) Arm Assembly
Straight Front/Rear 3 Stage reach from 22 7/8" to 42 5/8"
Straight Rear 2 Stage reach from 33 5/8" to 52 7/8"
Screw-in pads 4 pieces included
Truck adapters 4 pieces included
Double point safety lock release
Automatic arm lock restraints
Relief valve built in power pump to prevent overloading
Door guards protection rubber
Up-limit switch to protect cylinders working stroke used in safe length scope
Heavy duty 3/8" diameter cable and 5" pulley that reduce high stress on synchronization process and increase cable life
Ultra high molecular self lubricating nylon slider that ensures carriage smooth moving up and down
Lifting operation by pressing "UP" button on motor
Manual lowering operation by pressing lever
Relief valve built in power pump to prevent overloading
Overall Height: 143 3/16"
Overall Width: 134 5/16"
Maximum Lift height with Truck Adapters: 81"
Maximum Lift height without Truck Adapters: 75"
Minimum Height of Arm Top: 4"
Carriage to Carriage Width (Drive through clearance): 100"
Column to Column Width: 109"
Column Cross Section: 11"L x 7"W
Driving Mode: Dual hydraulic cylinders, chain drive
Motor: 220V Single Phase 3HP 10A (recommend a 30A breaker)
Hydraulic Oil: 3-5 gallons AW32/AW46
Lifting Capacity: 9,000 LB
Time to full rise: 50 sec
Concrete Requirement: 6" thick at 3500 psi reinforced with fiberglass or steel (4" thick for vehicles 9000LB and below)
Anchor bolts/mounting hardware included
Tool trays and toe guards included- Warranty is 1 year on parts and 5 years on the structure.
-Transport service and delivery available across Canada
See my other ads !!!!!!
For more information contact us Tel:1-800-361-4095Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
50
Auto Hoist Car Lift Tire machine changer Parking lift Wheel balancer They are in stock and we ship Canada wide, Grand Prix Import has been selling Quality Automotive Equipment since 1977 in the Canadian market .Tel: 1-800-361-4095 The MONDIAL MR-06 is a 6,000-lb. portable lift with a 52" lifting height(60" with truck adapters) that comes loaded with adjustable arm assemblies, a safety lock bar with multiple lock positions and a free set of truck adapters. This MR-06 is a mighty 6,000-lb. capable mid-rise scissor lift thats designed to fit nicely into narrower bays and wont take up your precious floor space. The mid-rise lift is absolutely perfect for detailing vehicles, wheel service, brake work, as well as an ideal lifting solution for DIY enthusiasts and hobbyists who enjoy taking care of cars in their home garage.
Lifting Capacity 6,000 lb
Power Unit 110V
Length 102"
Width 40"
Min Height 5.5"
Max Height 60" with truck adapters
Warranty is 1 year on parts and 5 years on the structure.
National Shipping Available Can be picked up at the local terminal, Delivery fee's apply please contact us for details .at 1-800-361-4095
See my other ads !!!!!!We have all spare parts in stock
1 year warranty on parts and 5 years on structure.
For more information contact us Tel:1-800-361-4095
Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9