Cars & vehicles, Heavy equipment with in Canada.
-
1
Selling our 2012 bobcat E-35 mini excavator, this unit only has 2060 hrs on it and just recently had one of the travel valves replaced as well as the whole valve bank replaced by bobcat, comes with a 36" clean up bucket as well as a 24" digging bucket with new teeth, has the 4 way blade, solid little unit with the big engine, looking at selling cause we don't use it enough
Asking 52,000$ obo
Financing available thru 3rd party
-
2
Used peterbilt pods .
Very good shape. Like new .
Chaged out for jw speakers
-
3
John Deere 5510 4WD Loader tractor. 3800 hours. Newer Quicke Loader. Good condition. $38,000.
-
4
1992 John Deere 9500 hydrostatic 4WD combine, Serial No. H09500X638276, 7.6L diesel turbo engine, two speed throttle, A/C, 7246 engine hours, 5177 separator hours, bin extensions. Good tires, 30.5 X 32 drive tires with 18.4-26 rear drive tires, straw chopper, reverser, for $21,950 – field ready. Lots of life left in this machine. Located near Kitchener. JD920F header for $7850. Please call 226-932-2391.
-
5
New unit, In Stock, tandem floation, vertical beater
New Used : Used
Condition : Excellent
-
6
1993 Ford L8000
Cummins engine
Runs well, frame solid
Flat bed requires new wood
Crane works
-
7
Good used condition. Will fit AC 180 also.
519-384-0820
-
8
Good solid cab tractor
Serial # : 53688
New Used : Used
Condition : Good
Paint Condition : Good
Hours : 2003 hrs
Fuel Type : Diesel
Cab ROPS : Cab
-
9
Gehl harvester has crop processor is in excellent condition with hay head and three row 20 inch corn head and a few new gathering chains
-
10
Used it a bit a year ago, no longer need it. It’s an old Ford plow
-
11
1999 Volvo ved12 engine ,runs great can be heard, or buy whole truck $7500
-
12
7610, 7710, and 7810
-
13
2019 Hitachi ZX210F-6 with 622b processor, 3977 hours . machine in very good shape. selling do to mill closure
-
14
1334 hours. Detroit DD16, 600HP
268 inch wheelbase, Eaton Fuller RTLO20918B
4.30 Diffs. 20,000 lb. Front axle
Rigging included
-
15
2018 Peterbilt 389 with 72" flat top sleeper, 605 HP 2050 torque, 256 WB, 391 gears, 46 ,000 rear axles, pete air,trac, all tires 11R24.5 @ 80% , disc brakes all around, Platinum interior, owner operator truck. very well maintained , cherry black in color. Encore engine can be purchased for this truck until Sept. 2023 . have full set of spec's . comes with one year engine warranty. truck will be serviced with fresh MVI Price reduced
check out pacifictruck.ca for more trucks and equipment
-
16
Skid Steer Power Broom 5 ft. sweep 18" broom 5 position manual angle Includes hydraulic hoses and skids Steer flat-faced coupler plate $1275
- 17
-
18
EXCAVATOR - PERFECT FOR MIXING COMPOST OR SLUDGE OR MIXING FLAMABLES - BRUSH INTO SOIL FOR FIRE PREVENTION ETC
OR USE CEMENT SLURRY INJECTED INTO THE PROTECTED SPRAY HOSE AND NOZZLE AT THE END BETWEEN THE PADDLES AND MIX SAND - GRAVEL OR OTHER MATERIALS TO MAKE A HARD CEMENT SURFACE.
LITTLE USED UNIT - MOUNTED C/W 90 MM PINS FOR ANY 250-350 CLASS EXCAVATOR
OR BUSH DOWN TO 80 MM PINS FOR 200-240 CLASS EXCAVATORS
TAKE THIS LOW HOUR C/W FACTORY STAND FOR $30,000.00 - NEW COST OVER $100,000.00 PLUS 6 MONTHS LEAD TIME
FRANK 604-476-7777
SEE THE VIDEOS
https://youtu.be/TiPzMbgxsgU
https://youtu.be/u-4ndeXn2cQ
DOWNLOAD OR OPEN THE ALLU PDF FILE - COPY AND PASTE :
https://www.allu.net/?post_type=allu_industry&p=2533
http://mail.ezead.com:7080/users/f.rayner/ALLU-SOIL-REMEDIATION/ALLU%20Stabilisation%20System.%20New%20concept%20for%20soil%20improvement.pdf
* Make: Allu
* Model: PM200
* BasicMachine Size - 20-30 tons
* Serial Number: 04PM200023
* Transport Dimensions: 101" L x 56" W x 61" H
* Operating Weight: 4,200 lbs
* 80 KW = 108 HP AT 100 LITRES PER MINUTE FLOW AT 2500 PSIFeatures of Unit:
Designed For Durability
Easy Mounting
Mixing Of Different Materials
Specifications
Pin Diameter: 90 mm
Distance to Pins (OC): 19" to Ears (ID): 16"
Fits: Set up for any 250-350 Class Excavator
Maximum working depth: 78"
Hydraulic: Two-way Rotation
ALLU PM Power Mix is a hydraulic equipment attachments for excavators.
When ALLU Power Mix is attached to the excavator, it turns into a mobile and efficient mixing plants.Optimum design
ALLU Power Mix is able to efficiently handle very hard materials, such as different
varieties of clay, peat, silt, sludge or polluted soil.Mixing efficiency is calculated based on the optimal horizontal position of rollers and the unique design of mixing elements.
The rollers move and mix material in three directions simultaneously.
Processing of the material to a depth of 3 meters
ALLU Power Mix can process the material to a depth of 3 meters, depending on the
equipment of the excavator and the condition of the material.Since ALLU Power Mix is an additional attachments, excavator can also be used to perform other operational tasks.
ALLU Power Mix is a perfect tool for both large and small amount of works to perform.
Designed for time-consuming tasks
ALLU Power Mix has a solid steel welded construction, all wear parts are made of wear- resistant steel, and can be replaced.
The radial piston motor is power-suppled by the hydraulic system of an excavator.
The rotation is transmitted to the roller through the chain drive.
The design requires minimal maintenance.
Easy to mount
ALLU Power Mix can easily be mounted on an excavator with the fingers or the quick-mounting adapter.
THIS UNIT IS ALSO SET UP TO WORK WITH THE ALLU POWER MIX FEED SYSTEM AS FOLLOW:
The ALLU PM power mix is a versatile accessory for excavators for in-situ soil stabilization.
The PM can process a variety of materials on site for a cost effective operation. With horizontal drums, the ALLU PF pressure feeder injects the binding agent beneath the ground directly to the middle of the mixing drums on the PM, guaranteeing better mixing to the base material.
The PF is a remote-controlled unit that follows behind the lead excavator. The power mix is available in three different model sizes to reach 5, 10 and 15 ft. (1.5, 3 and 4.6 m) depth.
For more information, call 800/939-2558 or visit www.allu.net.
-
19
2011 Frieghtliner Cascadia for sale,
1.4 M km original engine
AutomaticAsking 30k OBO
-
20
8 ton midi excavator
2011 with 5385 hrs
All possible options and upgraded features
Enclosed cab with heat & AC
Radio, suspension seat
Pin grabber coupler
Hydraulic thumb
Auxiliary hydraulics
Backfill blade
Rubber tracks
30” trenching bucket
57 hp Yanmar diesel
90” wide, 18,700 lbs, 15.5 ft max dig depth (extra reach Long-Arm)
Switchable Deere / Cat controls (SAE/ISO)
Original paint, decals – looks good stillNo issues, in daily use
Take and use it today, jobsite ready
Will need 1 new track before long, both are usable currently, one more recently replaced
Bucket and fittings reasonably tight, controls are responsive, very nice unit to operate
No leaks, issues, engine starts easily, runs strong
One-owner machine since new, extremely well maintained in-house by licenced diesel heavy equipment mechanic and well equipped shop, consignment owner is long-established local GTA prominent municipal infrastructure contractorFor more info pls see our website listing, direct page link:
http://www.comquip.ca/machines-used-mini-excavators.htmlLocated in North York. Local delivery possible
Call or text is better than email / Kijiji messaging
THIS AD WILL BE DELETED AS SOON AS UNIT SELLS. AD WAS JUST POSTED. NO NEED TO MESSAGE JUST TO ASK!$83,000
647-525-5989
.
.
.
.
ID M35-2290
-
21
2013 ITI Walking floor trailer model SFS. 53 ft. long, 102 W, and 98in.wall height. Sliding Trandem and like new Bridgestone tires 295-75-R22.5, excellent brakes. Automatic roll tarp with remote, has Roll Rite tarp return but not installed. Since 2017, has hauled 60 loads or rice hulls per year. Has 1 small patch on drive side rear, with a Hallco floor in excellent condition. No leaks and only minimal surface rust underneath. Washed and Rain X regularly. Back up lights and two rows of five lights on sides. Trailer is in excellent condition
-
22
2005 International truck dt466 engine. Great engine. No Deff. Means less headaches. 6 speed manual . These older models are reliable. Less than 350 Km . 24 ft box with ramp. Drives like new , used for moving . 416-236-1700
-
23
We carry a wide variety of Final drives / travel devices / track motors / hydraulic pumps / gear pumps and work pumps for construction and earth moving machinery.
Reconditioned and new pumps have from six months - to one year warranty.
- We stock new & reconditioned pumps for the following makes:
Bobcat
Caterpillar
Daewoo / Doosan
Halla
Hitachi
Hyundai
Isuzu Diesel Engine Parts
Kawasaki Hydraulic Pumps
Kobelco / Case / New Holland
Komatsu
Kubota
Samsung
Takeuchi
Volvo Excavator
Yanmar
We stock new, reconditioned and used major assemblies for CATERPILLAR excavators and loading shovels, such as:
FINAL DRIVES
TRAVEL MOTORS / TRACK MOTORS
SWING MOTORS
HYDRAULIC PUMPS
SWING REDUCTION GEARBOXES
MAIN CONTROL VALVES
CYLINDERS
HYDRAULIC OIL COOLERSAll our Parts are manufactured to precise OEM specifications enabling you to work safely and effectively at lower cost!
Call: 416-741-4243
50 Rossdean Dr, North York, Ontario, M9L 2S1, Canada
http://www.equipmentpartsdepot.com
3625 Weston Road Unit-5, North York, ON M9L 1V9
-
24
a well maintained truck for sale. always did all repairs and services at dealer. maintenance record will be provided. a truck with good potentials and performs well.
-
25
$400,000.00 NEW COST CUSTOM BUILT JEWELL BOOM AND TEREX DUAL DRUM EXTREME DUTY GRINDER
TAKE THE BOOM ONLY FOR $10,000.00
WE WERE GOING TO MOUNT IT ON A HITACHI 345USRL REDUCED TAIL SWING MACHINE BUT THE EXTENDING - RETRACTING BOOM WILL FIT ANY HITACHI / JOHN DEERE 400 - 470 AND OFFERS A 90-DEGREE VERTICAL SWIVEL DIPPER AND TEREX WS-120MD CUSTOM BUILT 90 DEGREE HORIZONTAL SWIVEL HEAD DEMOLITION DOUBLE DRUM GRINDER HEAD FOR TUNNELLING - GRINDING ETC
AND FOUNDATION - TRENCHING - SCALING WORK IN LOW OVERHEAD ENVIRONMENTS.
TEREX WS-120MD CUSTOM-BUILT 90-DEGREE HORIZONTAL SWIVEL HEAD DUAL DRUM GRINDER IS AN EXTREME DUTY GRINDER FOR CONCRETE DEMOLITION - TUNNELLING - ROCK PROFILING
THIS IS SET UP AS A SECOND MEMBER ON SMALLER MACHINES MOUNTING SYSTEM WITH A SWIVEL 90 DEGREE SWIVEL MOUNT FOR LOW OVERHEAD WORK OR TIGHT LOCATION WORK SUCH AS TUNNELLING
OR CAN BE MOUNTED AS A THIRD MEMBER ON LARGER MACHINES JUST CAN BE UNBOLTED AND REMOVED FROM THE SWIVEL MOUNT SYSTEM AND JUST BOLTED DIRECTLY TO A EXCAVATOR WITH A TOP PLATE MOUNTING BRACKET SYSTEM
THIS HEAD C/W HORIZONTAL 90-DEGREE SWIVEL SECOND MEMBER MOUNTING SYSTEM IS WORTH OVER $200,000.00
AS A THIRD MEMBER MOUNTING SYSTEM IS WORTH OVER $150,000.00
COMES COMPLETE WITH A CUSTOM-BUILT STEEL FORKLIFT COMPATIBLE STAND FOR STORAGE AND MOVING
ALSO HAS PRESSURISED WATER MISTING SYSTEM FOR DUST REDUCTION - JUST HOOK UP PRESSURIZED WATER TO THE WATER LINES - THE BOOM IS ALSO SET UP WITH WATERLINES
SEE A PDF FILE ON THE GRINDERS - (copy and paste)
http://media.voog.com/0000/0039/4210/files/ucm03_012855.pdf
SEE THE DETAILS AND PICTURES OF GRINDER AND THE BOOM ON MY GOOGLE DRIVE PAGE
https://drive.google.com/drive/folders/1iJDApC4v1DaM3eI1AUUFgC2Ps4xCjSyj?usp=sharinghttps://www.youtube.com/watch?v=CPCqVip3HlU
SEE VIDEOS OF THE GRINDER (copy and paste)
https://www.youtube.com/watch?v=CPCqVip3HlU
https://youtu.be/rSleaL-FoCo
https://youtu.be/BdzFNabFKQ4
DRUM CUTTER SPECIFICATIONS:
Hydraulic input power HP 160
Oil fl ow rate required gpm 66 - 106
Cutting head width in 47.2
Weight, approx. lbs 5,630 (WITHOUT SWIVEL TOP MOUNT - BARE GRINDER)Recommended excavator weight lbs
SECOND MEMBER MOUNTING 50,000 - 80,000
THIRD MEMBER MOUNTING 66,000 - 100,000 PLUS
Basic model incl. milling head
Special equipment
Transverse cutter head
Longitudinal cutter head
Rock cutting drum
Demolition cutting drum
Scaling cutting drumFIELDS OF APPLICATION
CANAL AND PIPELINE CONSTRUCTION
LANDSCAPE GARDENING
BIOREMEDIATION/SOIL MIXTURE
QUARRYING
SENSITIVE AREAS
ROAD CONSTRUCTION
TUNNELLING AND MINING
BUILDING RENOVATION AND DEMOLITIONTEREX’ mission is to make innovative products. For over 40 years the TEREX Group has been manufacturing roadheading
machines with cutting heads for mining and tunnelling operations.In the field of hydraulic transverse cutting units TEREX is the world-wide market leader and epitomises cutting-edge tech-
nology made in Germany.From civil engineering to landscape gardening – TEREX‘ cutting units show their strength and flexibility in a multitude of appli-
cations. Various hydraulic motors and cutting heads can be attached to TEREX | Schaeff cutting units, enabling an optimum
adjustment to operate conditions.The product range comprises seven types of transverse cutting units with hydraulic drive powers of 30 HP, 40 HP, 60 HP, 80 HP, 120 HP, 160 HP and 200
HP respectively.TEREX also offers solutions for special applications, such as cutting drums and slot cutting drums in various widths and
diameters, drums for cutting tree stumps, and anti-dust systems for indoor operations. Behind TEREX’ products you
will find a network of distributors who know the business inside out. Local dedicated service and support teams offer customers
professional support before, during and long after the sale.INNOVATIVE ENGINEERING – INDIVIDUAL SOLUTONS – COMMITTED CUSTOMER SERVICE OFFERING
1) Extremely economic
2) Extremely accurate cut
3) Low vibration FOR SENSITVE
4) Low noise
5) Suitable for underwater operations
6) Low maintenance
7) Suitable for narrow and deep trenches
8) Recycling of excavated material
ADVANTAGES OF CUTTING TECHNOLOGY HYDRAULIC TRANSVERSE CUTTING UNITS
TRUE ALLROUNDERSTHIS GRINDER IS FOR:
Medium-hard to hard rock and concrete
Wear-protected spiral blade for limited pick penetration, lower vibration and smoother operation
Boom extends from 14 - 20 feet and 45 degree swivel dipper for mounting of tunnel boom equipment such as a drum grinder for excavation of tunnel material in a low profile configuration
This custom built unit is composed of
•a basic low height boom set up for the factory double lift rams and integrated dipper ram •a tunnelling swivel dipper mount which rotates 2x45° either way • mounting for a dipper stick with double lift rams
Length of the standard boom to dipper mounting is 4200 mm (14 feet) extending to 6100 mm (20 feet)
Dual cylinder mounting swivel dipper stick can be custom built to accept any double drum or mondrum grinder
We were going to mount our TEREX WS-120MD Dual drum ginder head on this unit for tunnel and low overhead overhead excavation work.
All hydraulic lines c/w quick couplers for dipper mounted equipment included as well as water feed lines.
Unit is in excellent condtion.
AS WITH ANY CUSTOM-BUILT EQUIPMENT THIS IS EXTREMELY EXPENSIVE OVER $400,000.00 TO REPLACE
WE JUST DROPPED THE PRICE BY MORE THAN $50K AS WE ARE LEAVING BC FOR NB DUE TO HEALTH ISSUES FROM THE SMOG IN THE FRASER VALLEY
TAKE BOTH UNITS FOR $50,000.00
OR TAKE THE CRINDER FOR $40,000.00 AND THE BOOM FOR $10,000.00
BOTH UNITS WHICH ARE IN PERFECT CONDTION ARE SITTING AT S AND L WELDING MISSION BC (copy and paste)
http://www.slwelding.com/
WHO WOULD MODIFY IT TO FIT YOUR MACHINE QUICKLY AND REASONABLY.
THIS WOULD MAKE FOR THE LARGEST LOWEST HEIGHT GRINDER BUILT FOR TUNNELING AND FOUNDATION WORK IN LOW TIGHT AREA LOCATIONS
S AND l WHO DOES ALL OUR WORK AND WAS GOING TO MOUNT THIS ON AN HITACHI USLR 345 SHORT TAILSWING EXCAVATOR FOR US - BUT DUE TO THE SMOG AND TRAFFIC IN THE FRASER VALLEY, WE ARE LEAVING BC FOR NB WHERE WE BOUGHT A NEW HOME.
THESE UNITS MOUNTED ON A 345 HITACHI 345 USRL OR 400-470 CLASS EXCAVATOR WOULD RENT OUT FOR $600.00 PLUS PER HOUR AND WORK WHERE VERY FEW MACHINES COULD.
FRANK 604-476-7777
We can supply trucking anywhere in North America Except Mexico - we get great rates
- 26
-
27
2006 Case MXT Turbo Skip Loader
Rust free machine.
Has 80HP, 4 speed auto transmission, ride control, radio, cassette player, air conditioning, all work lights, factory counterweight with pintal hitch and hook up for trailer electric brakes.
Plumbed for hydraulic quick coupler.
Very good breaks, tires, power steering and NO worn pins.
Machine is in very good condition with just 3500 hours.
Previously owned by the municipality of Regina.
Call 709-687-3449 for more information.
*taxes and shipping extra
-
28
Kubota 43HP
2003 with only 743 hours!
Runs perfectly
Manual trans
Optional John Deere brush cutter.
-
29
NH 847 Round baler for sale. Barn stores for last 30+ years. Made hay last year with it. New drive belt last year. Located in Pemberton
- 30
-
31
4x 18000 LBS column hoist.
The hoists are basically brand new.
Please contact for more information.
-
32
Tracteur new holland td80d 2008 avec seulement 1086 heures, loader quick attache alo, mécanique simple toute a baton. 3 sortie arrière et souffleur a neige
- 33
-
34
Pelles Massey pour tracteurs de 100 Forces et plus avec bockets et control valve $1500 Aussi plusieurs autres loaders pour différents tracteurs S'adresser à Alain 418 836 5127
-
35
Location à la semaine 4400.00 $ et au mois sur demande grosseur 80000 lbs c’est une 350 John deere deux godets possibilité de réserver avec dépôt…
-
36
PONSSE BEAVER HARVESTER
AN AGILE SIX-WHEELER
A SOLID AND COMPACT MULTI-PURPOSE HARVESTERPONSSE BEAVER feels at home in dense thinning sites, and is also a reliable harvester at all sites where a durable machine is needed. The agility of a six-wheeler, combined with a solid structure, makes PONSSE Beaver unstoppable, even in difficult thinning sites.
makes working easy. It does not require any large transportation vehicle, and its operating costs are low. Its excellent visibility and high-reach crane make working easy, especially at thinning site
ABATTEUSE PONSSE BEAVER
UNE SIX ROUES AGILE
UNE ABATTEUSE POLYVALENTE SOLIDE ET COMPACTEPONSSE Beaver se sent chez elle sur les sites d’éclaircissement denses, et elle est une abatteuse fiable sur tous les sites sur lesquels une machine de base durable est nécessaire. L’agilité d’une six roues, combinée à une structure solide, rendent la PONSSE Beaver inarrêtable, même sur les sites d’éclaircissage difficiles. L’agilité requiert un petit rayon de braquage et un châssis court. C’est pourquoi la Beaver donne le meilleur d’elle-même sur les sites d’abattage rocheux et les autres sites sur lesquels l’agilité est requise.
facilite le travail. Elle ne nécessite pas de grand véhicule de transport, et ses coûts d’utilisation sont faibles. Son excellente visibilité et sa grue de grande portée facilitent le travail, en particulier sur les sites d’éclaircissage.
____________________
FOX
A LIGHTLY MOVING THINNING MACHINE
A SPECIALIST IN THINNING AND SOFT TERRAINThe PONSSE Fox harvester is a fuel-efficient and powerful combination of state-of-the-art technology and reliable solutions. Its driving forces are a precise and powerful crane, good visibility, machine stability and low surface pressure for demanding conditions and soft terrain.
The lightly moving PONSSE Fox feels at home at thinning sites and in soft terrain. The high-performance engine gives the necessary power, and the strong hydraulic-cylinder frame oscillation lock and high tractive force make Fox a stable machine capable of extremely high propulsion. The most distinctive strength of Fox is the solid, reliable and easy-to-use PONSSE C44+ parallel crane, which is located in the center of the machine. The strong and easy-to-use crane is located close to the cabin to ensure excellent visibility over the working area. The crane’s high efficiency ratio enables excellent fuel economy and high productivity.
UNE MACHINE D’ÉCLAIRCISSAGE QUI SE DÉPLACE AVEC LÉGÈRETÉ
UNE SPÉCIALISTE DE L’ÉCLAIRCISSAGE ET DU TERRAIN MEUBLE
L’abatteuse PONSSE Fox est une combinaison économe en carburant et puissante de technologie dernier cri et de solutions de base fiables. Ses forces sont une grue précise et puissante, une bonne visibilité, la stabilité de la machine et une pression réduite en surface pour les conditions difficiles et le terrain meuble.
PONSSE Fox qui se déplace avec légèreté , est chez elle sur les sites d’éclaircissage et sur les terrains meubles. Le moteur aux performances élevées fournit la puissance nécessaire, et le verrouillage d'oscillation de châssis à vérin hydraulique solide et la force de traction élevée font de la Fox une machine stable capable d’offrir une propulsion extrêmement élevée. La force la plus distinctive de la Fox est la grue parallèle PONSSE C44+ ,solide, fiable et facile à utiliser , elle est située au centre de la machine. La grue solide et facile à utiliser est située près de la cabine pour assurer une visibilité excellente sur la zone de travail. La grande efficacité de la grue offre une excellente économie de carburant et une productivité élevée.
_____________________________________
COBRA
A MULTI-TALENT IN ALL TYPE OF HARVESTING
AN ECONOMICAL ALL-ROUND HARVESTER
The new PONSSE Cobra harvester is a versatile and efficient tool for varying conditions. Thanks to its adaptability, it is right at home for both thinning and clear-cutting. An eight-wheel all-round machine, PONSSE Cobra is a good addition to a group of several machines thanks to its versatility and functional properties, but it is also an excellent choice for an entrepreneur who needs one machine for all logging sites.
Thanks to its reliable basic solutions, the Cobra is a durable and economical package whose accurate and easy-to-use crane, good balance, efficient working pump and powerful six-cylinder engine make it a dependable tool for years.
UNE MACHINE MULTI-TALENTUEUSE DANS TOUS LES TYPES D’ABATTAGE
UNE ABATTEUSE COMPLÈTE ÉCONOMIQUE
La nouvelle abatteuse PONSSE Cobra est un outil polyvalent adapté à des conditions changeantes. Grâce à sa polyvalence, elle se sent chez elle sur les sites d’éclaircissage et de coupe à blanc. PONSSE Cobra est une machine polyvalente à huit roues idéale pour compléter les équipes de travail de plusieurs machines grâce à sa polyvalence et ses propriétés. C’est également le choix parfait pour les entrepreneurs qui utilisent une seule machine sur tous les sites d’abattage.
Grâce à ses solutions de base fiables, le modèle Cobra est une abatteuse durable et économique. Sa grue précise et facile à utiliser, son bon équilibre, sa pompe de service solide et son moteur six cylindres puissant font de la Cobra un outil fiable pour plusieurs années. La grue est située sur le bogie arrière, rendant la machine très équilibrée. Sa portée de 11 mètres est une caractéristique imbattable, en particulier sur les sites d’éclaircissage, la distinguant de la majorité des autres machines.
_____________________
SCORPION
A REAL BEAST OF A HARVESTER
PONSSE Scorpion, the icon of modern forest machines, was launched in 2013. This changed the whole forest machine industry. Now, it is time for a new change. The new PONSSE Scorpion has arrived. The operator has been further emphasised in the design of the PONSSE Scorpion. Their well-being is a prerequisite for productivity. So we focused on designing as good a workplace as possible. NEW PONSSE Future Cabin The best features are the same as before, only further improved. Good visibility in both daylight and low light, high stability in difficult conditions, and excellent ergonomics make the Scorpion a favourite among operators. Increased space, high-quality materials and a stylish design raise the comfort of the machine’s cabin to an entirely new level. Once the door is closed to the outside world, all is quiet, elegant and in the right place.
UNE ABATTEUSE SURPUISSANTE
La PONSSE Scorpion, l’icône des machines forestières modernes, a été lancée en 2013. Elle a alors révolutionné l’ensemble du secteur. Il est désormais temps d’instaurer un nouveau changement avec le lancement de la nouvelle PONSSE Scorpion.
Le design de la PONSSE Scorpion a mis encore davantage l’accent sur l’opérateur, dont le bien-être est indispensable à la productivité. Nous nous sommes donc attachés à concevoir le meilleur environnement de travail possible.
LA CABINE PONSSE DU FUTUR
Si les meilleurs atouts ont été conservés, ils ont bénéficié de nouvelles améliorations. En offrant une bonne visibilité à la fois de jour et de nuit, une stabilité élevée dans les situations difficiles et une excellente ergonomie, la Scorpion est le modèle de prédilection des opérateurs.
Avec un espace plus généreux, des matériaux de qualité et un design raffiné, la cabine de la machine offre un tout autre niveau de confort. Lorsque la porte se referme sur le monde extérieur, tout est silencieux, élégant et à sa place._______________________
SCORPON KING
The most balanced performance
The legendary PONSSE Scorpion King has been reborn. The paragon of usability and productivity is now even better than before. Raw power is transformed by the operator into the Scorpion King’s famously effective and precise harvesting.
The operator remains central to the design of the PONSSE Scorpion King. Alert and comfortable operators can bring the most out of a machine, and the Scorpion King has a lot to offer.
NEW PONSSE Future Cabin
The PONSSE Scorpion King is now even more refined, elegant and comfortable to use. The dignified cabin is something not previously seen in working machinery. The spacious interior and high-quality materials make you feel everything is in the right place and better than before. The b -
37
Tracteur MF 135 diesel moteur 3 cylindres avec power steering pneus bons 90% Très bon état transmission 3 vitesses low vite pas de multi power $5500 S'adresser à Alain 418 836 5127
-
38
Rb 450
-gros pikup
- 5 ranger de dent en ruber
- silage special
-kit azote
-miniteur
-filet
Super etat
-
39
New 2012 Artix 74 inch push/pull blower. Hydraulic chute and rotation. Condition new. Financing available delivery anywhere in Canada.
Souffleur Artix 2012 neuf de type pousser/tirer 74 pouces. Chute et rotation hydraulique. Jamais utilisé. Financement disponible livraison partout au Canada.
-
40
2011 Kaeser M26 towable compressor with 1320 hours. 92 CFM total power, quiet Kubota engine. Up-to-date manufacturer maintenance, financing available, delivery aniwhere in Canada.
Compresseur remorquable Kaeser M26 2011 avec 1320 heures. Puissance de 92 PCM totale, moteur Kubota. Entretien du manufacturier à jour, financement disponible, livraison partout au Canada.
-
41
2020 John Deere 2032R Compact Tractor with 85 hours. Practically new tractor with front loader, radial tires, block heater and double rear oil outlet. Financing available delivery anywhere in Canada.
Tracteur compact John Deere 2032R 2020 avec 85 heures. Tracteur pratiquement neuf avec chargeur avant, pneus radial, chauffe-moteur et sortie d’huile double arrière. Financement disponible livraison partout au Canada.
-
42
Merlo TF33.7 2021 telehandler with 500 hours. Deutz TCD3.6 4-cylinder 115 HP engine, speed 40 km/h, hydrostatic transmission, forks included up-to-date maintenance, financing available, delivery anywhere in Canada.
Chariot télescopique Merlo TF33.7 2021 avec 500 heures. Moteur Deutz TCD3.6 4 cylindres 115 HP, vitesse 40 km/h, transmission hydrostatique, inclus fourches, maintenance à jour, financement disponible, livraison partout au Canada.
-
43
Massey ferguson 596, année 2007, 100 hp au moteur, moteur perkins turbo diesel, 4323 heures, 4x4, le 4x4 se débraye, differenciel se barre, loader dl 280 avec quick attache uhardy, aile de compagnie vienne avec elles ont été changés a l’achat pour des ailes en tole,3em fonction sur loader, 12 vitesses du devant et 4 du reculon,2 sorties hydraulique arrière,pto 540 et 1000 tours, air climatisé et chauffage, radio c/d,lumière au led et barre au led, barre 3 point et barre a rotule, skid plate forestière a grandeur,tres bien chausser, prise arriere pour lumiere de remorque, aucune fuite d’huile, très bonne machine, trop gros pour mes besoin…
-
44
2017 John Deere 6100D Tractor with 4100 hours. NEW REAR TIRES NOT SHOWN ON PICTURES. Cab, front loader, bucket, forks. Up-to-date manufacturer maintenances, financing available, delivery anywhere in Canada.
Tracteur John Deere 6100D 2017 avec 4100 heures. PNEU ARRIÈRES NON INSTALLÉ SUR LES PHOTOS. Cabine, chargeur avant, godet et fourches Entretiens du manufacturier à jour, financement disponible, livraison partout au Canada.
-
45
2019 John Deere 1023E Compact Tractor with 159 hours. Tractor equipped with a front loader and a 54’’ Autoconnect mower deck. Tractor in very good condition, up-to-date manufacturer maintenance, financing available, delivery anywhere in Canada.
Tracteur compact John Deere 1023E 2019 avec 159 heures. Tracteur équipé d’un chargeur avant et d’une tondeuse Autoconnect de 54’’. Tracteur en très bonne condition, maintenance du manufacturier à jour, financement disponible, livraison partout au Canada.
-
46
Takeuchi TB175 2009
4100 heures
Super propre. La pelle me servait sur ma terre. Tout est à jour, notamment :
- Toutes les huiles changées
- Tous les filtreurs changés
- Une traction neuve
- les sprokets sont neufs
- Aucun cylindre ne coulent
Rien à dire sur la machine, prêt à travailler!
Aucune réparation à venir
Possibilité d’obtenir une remorque gooseneck de 25 pieds N&N 2016 à rabais en combo avec la pelle.
-
47
Tracteur compact John Deere 3046R 2019 avec 884 heures. Tracteur équipé d’un chargeur avant avec une gratte réversible Cotech seulement. Deux sorties d’huiles arrière. Maintenance du manufacturier à jour, financement disponible, livraison partout au Canada.
2019 John Deere 3046R Compact Tractor with 884 hours. Tractor equipped with a front loader with a Cotech reversible plow only. Two rear hydraulics. Up-to-date manufacturer maintenance, financing available, delivery anywhere in Canada.
-
48
Tracteur John Deere 5100E 2019 avec 1 660 heures. Tracteur équipé de Chargeur avant, attache rapide ALO, comprends le godet, siège passager, 5 sorties hydrauliques arrières. Transmission PowrReverser 24/12. Tracteur en très bonne condition, maintenance du manufacturier à jour, financement disponible, livraison partout au Canada.
2019 John Deere 5100E Tractor with 1 660 hours. Tractor equipped with a front loader, quick attach ALO, come with bucket, buddy seat, 5 rear hydraulic outlets. 24/12 PowrReverser transmission. Tractor in very good condition, up-to-date manufacturer maintenance, financing available, delivery anywhere in Canada.
-
49
2014 W900 with recent in frame, transmission just rebuilt , front and rear structures , new clutch, motor mounts , suspension rebuilt. have all work orders. truck in very good shape, has 60" sleeper not 72. no fridge. has engine Wabasco heater. tires 80%. fully serviced
-
50
2002 Kubota L35 Tractor Loader Backhoe with low 1535 hours. This L series Kubota is a 35 HP 4WD tractor with front end loader and BT900 backhoe. Gross weight is 6000 lbs. Glide shift transmission. The tractor has been upgraded with a quick attach HLA bucket system and
rear hydraulics have been mounted for use when the backhoe is removed and substituted for attachments mounted on the included three point hitch arms. Pins and bushings on the backhoe are tight
and the backhoe has seen minimal use (approx 50 hrs) as a homeowner’s tractor. No tier 4 burn off system. This unit has had a recent service including a new battery, new starter and a brake and clutch service. Now $29,950 plus hstDelivery available
902-824-4812
Tractor with loader and three point hitch available for $24,995 plus HST. Backhoe available for $8500 plus HST.
Check online reviews and pricing.