Cars & vehicles with in Canada.
-
1
found on a fishing trip..next to new... im sure it will clean up easy ,,,,... smoke/petfree ...see my other ads
-
2
2001 Ranger Fisherman DVS (bought new in 2002)
One owner since 2005, superbly appointed and professionally maintained.
200 hp Mercury Optimax with only 450 hours, complete with Hot Foot throttle control and hydraulic Jack Plate and steering. 1000 cold cranking amps AGM battery, charged via Minn Kota on board charger. Custom stainless prop.
Mercury Big Foot 9.9 hp with electric Panther Lift and a TR1 Autopilot controlled by hand controller (both throttle and steering) positioned at the console and movable around the boat via cable; no more manual steering, the autopilot steers according to electric compass and can do zig zag and various other trolling patterns even in rough water.
101 lb thrust Min Kota on the bow, powered by 3 deep cycle batteries (new in 2021). Batteries charged by 3 bank on board charger.
Humminbird Helix 7 with map cartridge on the console, and Lowrance sonar i/c GPS and map cartridge at the bow.
VHF radio and antenna.
Scotty electric downriggers, Shark canon balls and other assorted balls.
.
Down East and Scotty rod holders.
Detachable bass casting platform at the stern.
Boat cover with custom support frame.
YOU CAN BUY AN ENTRY LEVEL 17 FT ALUMINIUM FOR MORE MONEY, OR PURCHASE THIS FULLY EQUIPPED TOP END MINT CONDITION ROUGH WATER BOAT FOR LESS!
Asking $35,000 i/c all required on board safety equipment and other extras.Call Neil: 613-583-3434 (Kingston).
-
3
Stable Family Canoe – Great Price $400
The Paluski Passage is The most stable family canoe we have ever used. These canoes are our go to canoes for most rentals. Safe, and strong, built to last. Great for kids, beginners , at the cottage and for fishing.
Built right in Lakefield Ontario by Paluski boats. There are only a few of these left, going fast.
16 foot long, 39 inches wide (very stable), 14 inch max depth, 2 seaters, various colours, about 70 lb (great for the cottage)
Some are 5 years old - $400, some are 7 years old - $300
Comes with life jackets.Built for Family Trips! With a deep V hull, the Passage offers immense carrying capacity and excellent tracking on open water. Designed for rough treatment -- the Passage is manufactured using Paluski’s unique high-density foam core laminate to produce a stiff, non-warping hull.
Paluski Boats has been manufacturing high-quality and durable canoes, kayaks and paddles since 1980. 100% Canadian-made.Going fast, first come , first serve. By appointment only.
-
4
Ahoy Rentals is selling it 2023 rental fleet. Purchased new at the start of the season, these kayaks are still in great shape with only cosmetic scratches along the bottom.
Price Listed is for each kayak with paddle.
We have 7 of these for sale Yellow (3), Blue (4).
Listing updated February 27, 2024.
Retail New with Paddle: $1,000 + HST.
This kayak is a very stable recreational kayak that offers a large cockpit opening. The widest part of the kayak is behind the paddler. It narrows quickly creating a nice sleek design. This kayak is perfect for a small to mid sized paddler.
Specifications:
Length: 11' 8"
Weight: 46 Lbs.
Width: 27"
Capacity: 275 Lbs.
-
5
These trailers take the hassle out of transporting your kayak or canoes, all without having to worry about how you're going to get them on and off the roof of your vehicle.
Light and economical, the Kayak-ity-Yak TR15-GLV-RT base trailer is also a breeze to store thanks to its retractable tongue. For those wishing to store the trailer indoors, the overall length reduces from 15' to 9' so that it can be stored vertically, taking up no more than 2' of valuable storage space.
The Two Level Tree with 29.5in Centre Masts maximizes flexibility and easily carries 4 kayaks; or two kayaks and a canoe; or two kayaks, bikes, and a cargo box.
Base Trailer Features:
• Fully galvanized welded steel frame;
• Fresh water submersible LED Lights;
• Retractable tongue for vertical indoor storage [15’ overall with tongue extended; 9’ retracted];
• Rubber bumpers for slip resistant vertical storage;
• Leaf spring suspension;
• ABS impact resistant black plastic fenders
• 4.80X12 galvanized wheels;
• Safety chains with S-hook spring safety tabs;
• 2” coupler;
• Transport Canada approvedHorizontal support arms are 64in wide and may be purchased with optional protective anti-slip rubber strips.
Optional accessories:
• Folding Jack Stand with wheel - $69.95
• Spare Tire 12" GL 4 Bolt - $109.95
• Spare Tire Bracket – Galvanized – $29.95
• Trailer Hitch Pin - KIY – $2.95
Other models shown at the link
https://www.kayak-ity-yak.com/kayakcanoepwc-trailers.html
-
6
2024 Wellcraft 355 Commuter, Triple "All New" Mercury 350XL V-10’s, Air Conditioning, Shore Genset, Twin Garmin GPS Map 8416 XSV, Mercury Vessel View, Upgraded Fusion Audio Pack, Anchoring Kit, Fender Kit, Underwater Lights, Curtain Package. View more photos at aqua-mania.com. In Stock! #WellcraftBoats #OwnTheOffshore
-
7
Recreational Sit-in Fishing Kayak
1pc Paddle
Deluxe cushion seat
(Shown here with the optional aluminum tube frame seat/trolley)
2 rod inserts & 2 removable rod holders
Large open storage well at the rear with
bungee tie downs (shown here with the optional hinged cover)
Dashboard storage hatch with nylon liner
Forward hinged storage hatch with bulkhead
Paddle park
Two cup holders
Adjustable foot pegs
Threaded drain plug with o-ring
Two ultra-grip carry handles
Rust resistant stainless steel fittings
Warranty (lifetime parts / 1yr labour)
SPECIFICATIONS
3.83 m (L) x 0.770 m (W) x 0.33 m (H)
12' 7" (L) x 30.3" (W) x 13" (H)
Weight: 31.3 KG (69.0 lbs)
Total Load Capacity: 150 KG (330 lbs)
High Density Polyethylene (HDPE) shell
MSRP $795 plus tax foam seat
$895 + hst tube frame trolley seathttps://www.kayak-ity-yak.com/strider-xl.html
-
8
NEW Harness for Balmar MC-618 charge controller
-
9
2024 Wellcraft 302 Fisherman, Scarab Package, TwIn Mercury 350 XL Verado's Deluxe Fiberglass T-Top, Garmin GPS Plotter, Carbon Fiber Cockpit, Bow Seating Package, Bow Table, Dive Door, Dive Door Ladder, Console Spray Shield, Windlass w/Anchor Rope & Chain, Premium Sound System, Enclosed Head, Live Wells, Rod Holders, Triple Axle Trailer. $279,900
-
10
Good set of cams for the 1996, 1997 GSXR750 . Shipping available at buyers expense.
-
11
Only 19000 kms second owner. New tires, 2 sets of risers, new battery, Vance & Haynes exhaust, automatic battery charger,smoked lenses, screaming eagle air filter, engine tuner, lowered, lots of power. Mint condition. Cover and helmets included.
-
12
parts only sold on bill of sale
-
13
Hi I am selling my beautiful bike that runs great everything was amazing its 2012 with only 25.000 kms on it upgraded with cobra pipes very good sound price is little negotiable text or mail 5198974450
-
14
Blink model, light adjusting lenses. Comes with case and lanyard strap, but no foam facial seal gasket. Model is discontinued so you probably wont find the gasket.
Excellent condition with no scratches.
Asking $25.00
-
15
2003 Suzuki Intruder VS1400GLP in good running order for Sale.
53000 Km
New clutch end of last season (300km on it)
V&H classic pipes ( more of a deeper sound)
Steal brake and clutch lines 3 years ago
LED head light.
Stage 1 jets
K&N filters
Mustang seat
Some minor marks from age.
Have most stock parts still and service manual.
Asking $4500 obo as is
Please no low ball offers.
I will not ship.
No holds, first with cash in hand takes it.
If the add is up it is still Available.
-
16
2017 Harley-Davidson Dyna Street Bob · Driven 18,000 kilometers
2017 Dyna Street Bob in charcoal and black denim. Has been an absolute dream to ride with zero issues at all. Upgrading to a roadglide so this has to go. NO TRADES unless you're adding $10k+ with another HD. Open to REASONABLE offers. List of upgrades below.
-Thrashin 9.5 pullback risers
-Thrashin mid bend bars
-Thrashin militant pegs
-Thrashin shift arm and shifter tip
-Odi Hart-Luck grips
-Bung King front crash/highway bar
-Legend 13.5" Revo-A in the back
-Legend axeo front end
-Saddleman step up seat
-Arlen Ness big sucker air cleaner
-Lay flat plate
-SPC big bore exhaust
-Dynojet Power Vision black series
-Pazoma quick release. 1/4 fairing vinyl wrapped
I have 2 sets of bags (1 leather and 1 small soft bags) and some other parts that can be thrown in for asking price.
$17 999 obo within reason
Located in Cambridge ontario
-
17
Honda Rebel 300 Cruiser Motorcycle with ABS. You're ready to ride the streets with added comfort and confidence with the Honda Rebel 300. The iconic bike offers a user friendly power, bobber inspired styling and a low seat height, make this bike easy to enjoy across the city and open roads alike.
Includes
saddle bags
Bike stand
Needs nothing for safety*********2500KM***********
-
18
2019-2021 CB650R/CBR650R Manifold cut from breadbox ready for custom exhaust.
Bike was sold before being able to use
$100
-
19
1998 Yamaha rt100 mostly original, two owners, runs great, new tires, new inner tubes, new aluminum bars, new grips, new chain, aftermarket aluminum foot pegs, new air filter, rebuilt oil pump, fresh transmission oil, new brake lever, new swing arm bushings, new fork seals, frame has very minimal rust, no rips in seat, one of the most reliable bikes, ever perfect starter bike for a kid
-
20
Great running wheel loader. comes with forks and bucket. Brand new tires installed and have extra pump parts from donor loader. Not in a rush but dont use it very often so looking to trade for something cool or cash.
-
21
I have a few good used plate compactors for sale
All are good runners that are ready to work
210lb units staring at $1500
500lb units starting at $4500
900lb gas units that are only about a year old staring at $8000
1000lb hatz diesels like the one pictured starting at $9500
Most under 250hrs
Located in Nanaimo but we deliver all over the mainland and BC
Call or text 604-551-6620
-
22
Looking for Peterbilt 379 or 389 long hoods
Blown engines
Flat tops
Etc
Projects good
Blown engines
-
23
Dd15, 18spd,46s,spend well over 30k when parked nice clean train tractor.may take part trade Corvette or what have you
-
24
235 LCR Zero Tail swing, Doosan excavator, one owner/operator, 8163 hours, Cab Guard (Fops) direct link hydraulic thumb, 36" digging bucket & 60" clean up bucket, manual quick change (200 series) Plumbed for and comes with rock breaker.
-
25
08 Skid Steer in great shape. 6100 hours
Located in Nanaimo BCMessage for more details
-
26
This is a one owner one user LOW hour Doosan Mini excavator with Quick release bucket change option, wide clean up bucket along with a hardly used rip bucket. Has serrated thumb option , only 450 hours. fully dealer serviced up to date.
FINANCING / LEASE OPTIONS AVAILABLE!!!!!!!!!!
-
27
2011 Atlas Copco XAS 185 Air Compressor, 4 cyl John Deere Deisel engine, 1670 hrs, 100 to 150 PSI, front and rear air outlets, great shape, regular services.
-
28
DT466 Engine
Well maintained lower KM truck.
86x63 Aluminum lift gate, 3500lbs
4 New rear tires (chains included)
New tail light assembly, Emergency brake, new brake pads and door latch
Includes a Pallet Jack, ratchet straps and DOT approved road side triangles
Box length is 24.5 and is spray foamed. Heater located in box works, but has the coolant lines disconnected as it was not needed
Dry box, no leaks
Well maintained at PnR Nanaimo or Inland Nanaimo
Dual fuel tanks
Everything runs, and works
Needs front passenger tire
Truck was used to move new high end furniture and pallets of goods
Looking to use this for a moving company? We have bran new moving blankets, tape and shrink wrap that can be negotiated into the sale
Vehicle is located in Nanaimo BC (Vancouver Island)
Please text or email for a viewing or any further information.
-
29
Brand new & never used
Asking for $1300 O.B.O
Originally priced $1500
-
30
For sale clean low hour johndeer 35d one owner since new 1550 hrs seen very light use c/w dig bucket cleanup bucket and thumb tracks and bottom rollers replaced in the last 100 hrs extremely well maintained machine will consider trade for a newer ford or Chevy diesel pickup
-
31
Parting out McCoy gravel box 151/2foot mechanical 8000 425 cat engine 7000 46 rears back locks up rest off truck make offers call 2506172783 2509625599 leave message
-
32
Imagine cutting firewood with the music on, drinking a coffee, and in a nice warm cab of your skid steer or tractor. Now that's possible with a Halverson firewood Processor.
Perfect for light commercial and residential use, the HWP-120 & HWP-140B Skid Steer Firewood Processors of Halverson Wood Products, truly make the job hassle-free. When attached to a skid steer or other equipment, it enables the operator to easily and efficiently perform wood cutting and splitting tasks.
Works on any just about any machine producing a minimum gph of 15 and a skid steer mounting plate.
Available for sale processors, grapple saw inverted splitters and log grapples.
The new HP 150 is also now availible. Its able to handle 21" wide logs and has a hydraulic operated splitting wedge.
Located in Ontario however i will ship Canada wide and have units in stock. Pre covid customer service.
Financing available please see.lin
k below.
I have log loader trailer, log grapple and root rakes. I am your one stop log shop
https://canadian-financial.ca/brian-troy/woodprorileyequipment
-
33
2020 Doepker hay rack , used one summer and one winter. Like new condition.For rent or sale. 2750 per month rent. 10-6 bunks , heavy duty frame for off highway use.
-
34
Jx1060c Case tractor with quick attach loader and bucket. 1420 hours on machine.
Everything works as it should, tires good.
3 cylinder diesel engine, 4 gears, 4 ranges.
Ac and cab heater work, all lights work.
Call 250 617 7852 if interested, thanks.
Can't up load pics, text me if interested and I will send you pictures.
-
35
2012 Mack Titan
582,000 km going up as truck still working
Good Rubber
New box Stringers and floor
Deleted
Rawhide interior
18 spd eaton1 locker
Beautiful truck in and out
Fresh CVI on truck
1996 langfab tandem pup
-
36
Tractor chains 27 wide x110 long
-
37
Kenworth t800
Strong running cat c15 6nz
18 speed
Truck has all new suspension bushings and shocks
Brand new starter
Brand new steer tires
Brand new batteries
Brand new ac compressor
Fresh inspection done Feb,22/2024
-
38
Couple sets of new tripples
11r22.5 tire chains. 8mm. Also have new set of 32" dynaline chain plyers for sale.
-
39
I have 4 New sprockets for a hitachi 350. Also fits jd 290f, jd 2954. 550 each. Open to offers
-
40
Tire changer TC-325 TEL: 1-800-361-4095 **** Tire Machine MONDIAL TC-325 with bead blaster and internal air tank at combo with balancer Swing arm Tire changer • It allows to remove and install tires up to 24 "in wheel diameter • Plastic inserts are provided to protect the alloy wheels.
- One year warranty on parts. We have all spare parts in stock. -Transport service and delivery available across Canada
-4 post parking lifts available Other garage equipment available.
For more information contact us Tel: 1-800-361-4095 Address 8275 17th Avenue MONTREAL, QC H1Z4J9
-
41
Tire Machine & balancer Combo 1-800-361-4095 They are in stock and we ship Canada wide, Grand Prix Import has been selling Quality Automotive Equipment since 1977 in the Canadian market !!!!!!!!!!!!!!
MONDIAL TC-325 Balancer WB-255
TC-325 Swing arm Tire changer with Bead Blaster It allows to remove and install regular tires up to 24 "in diameter. Help arm for runflat/low profile tires is available as an option Plastic inserts are provided to protect the alloy wheels.TC-325 Specifications
Rim clamping outside 10"-22"
Rim clamping inside 12"-24"
Motor: 2HP, 15 AMPS, 120V/60Hz
Maximum Tire Diameter 41"
Wheel width:3’’-15"
Operating pressure 115-145 psiWB-255 wheel balancer can support rim size from 10" to 24", tire size up to 34", perfect for home use or business.
Rim diameter: 10"-24"
Max tire diameter: 1000mm
Tire width: 15"-16"
Balance precision: 1g
Motor: 110V- One year warranty on parts. We have all spare parts in stock.
-Transport service and delivery available across Canada, delivery fees applies.Adress
GPI
8275 17th Avenue
MONTREAL,QC
H1Z4J9
-
42
New never used TD 15 Tracks. Two sets. Asking $12k per set or $20k for both sets. Still in original create. Stored in shelter for most of their life. They need a dozer to wear them.Will consider trade for a zero turn mower 60” deck minim. Kabota, John Deere or toro. Call or text 867-875-7538. Or message here. Tracks located in Hay River NT.
-
43
We sell Tire changers Balancers Hoist and other garage equipment and they are in stock and we ship Canada wide 1-800-361-4095 Grand Prix Import has been selling Quality Automotive Equipment since 1977 in the Canadian market .
MONDIAL AUTOMOTIVE EQUIPMENT, GP-9L is is one of the most affordable floor plate car lifts built with quality materials and good workmanship. The lift has a strong double "S" column design to support 9000 Lbs capacity. Its an asymmetric lift - Double cylinder, Steel pulleys and equalizing cable system. - Truck adapters are included. - motor / pump 3 hp - 220 volts. - The height of the lift is 9'4 "-
Combo (Symmetrical and Asymmetrical) Arm Assembly
Straight Front/Rear 3 Stage reach from 22 7/8" to 42 5/8"
Straight Rear 2 Stage reach from 33 5/8" to 52 7/8"
Screw-in pads 4 pieces included
Truck adapters 4 pieces included
Double point safety lock release
Automatic arm lock restraints
Relief valve built in power pump to prevent overloading
Door guards protection rubber
Up-limit switch to protect cylinders working stroke used in safe length scope
Heavy duty 3/8" diameter cable and 5" pulley that reduce high stress on synchronization process and increase cable life
Upgraded Floor Plate, Beveled Diamond Plate Steel 5/32" with Supporting Bracket.
Ultra high molecular self lubricating nylon slider that ensures carriage smooth moving up and down
Lifting operation by pressing "UP" button on motor
Manual lowering operation by pressing lever
Relief valve built in power pump to prevent overloading
Overall Height: 113 5/8"
Overall Width: 134 5/16"
Maximum Lift height with Truck Adapters: 81"
Maximum Lift height without Truck Adapters: 75"
Minimum Height of Arm Top: 4"
Carriage to Carriage Width (Drive through clearance): 100"
Column to Column Width: 109"
Column Cross Section: 11"L x 7"W
Floor Plate Cross Section: 10 5/8"W x 1 7/8"H
Driving Mode: Dual hydraulic cylinders, chain drive
Motor: 220V Single Phase 3HP 10A (recommend a 30A breaker)
Hydraulic Oil: 3-5 gallons AW32/AW46
Lifting Capacity: 9,000 LB
Time to full rise: 50 sec
Concrete Requirement: 6" thick at 3500 psi reinforced with fiberglass or steel (4" thick for vehicles 9000LB and below)
Anchor bolts/mounting hardware included
Tool trays and toe guards included- Warranty is 1 year on parts and 5 years on the structure.
-Transport service and delivery available across Canada
See my other ads !!!!!!1 year warranty on parts and 5 years on structure.
For more information contact us Tel:1-800-361-4095
Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
44
Year
2005
Manufacturer
FREIGHTLINER
Model
BUSINESS CLASS M2 100
KM 348469 km
VIN 1FVACWCSX7HZ23565
Odometer 348,469
Accurate / Verified
Condition Used
Stock Number 1FVACXCT75HP00461
Description
LOW KM FOR THE YEAR, 24' BOX, LIFT GATE, READY TO GET YOUR BUSINESS STARTED THIS 2005 FREIGHTLINER MS READY TO GO MERCEDES BENZ POWERED, ALLISON 6 SPEED AUTO TRANSMISSION, DON'T MISS OUT ON THIS ONE! CALL/TEXT GREG ROWE 867-875-7222 FOR MORE INFORMATION, THANKS!
-
45
Auto Hoist Car Lift Tire machine changer Parking lift Wheel balancer They are in stock and we ship Canada wide, Grand Prix Import has been selling Quality Automotive Equipment since 1977 in the Canadian market .Tel: 1-800-361-4095 The MONDIAL MR-06 is a 6,000-lb. portable lift with a 52" lifting height(60" with truck adapters) that comes loaded with adjustable arm assemblies, a safety lock bar with multiple lock positions and a free set of truck adapters. This MR-06 is a mighty 6,000-lb. capable mid-rise scissor lift thats designed to fit nicely into narrower bays and wont take up your precious floor space. The mid-rise lift is absolutely perfect for detailing vehicles, wheel service, brake work, as well as an ideal lifting solution for DIY enthusiasts and hobbyists who enjoy taking care of cars in their home garage.
Lifting Capacity 6,000 lb
Power Unit 110V
Length 102"
Width 40"
Min Height 5.5"
Max Height 60" with truck adapters
Warranty is 1 year on parts and 5 years on the structure.
National Shipping Available Can be picked up at the local terminal, Delivery fee's apply please contact us for details .at 1-800-361-4095
See my other ads !!!!!!We have all spare parts in stock
1 year warranty on parts and 5 years on structure.
For more information contact us Tel:1-800-361-4095
Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
46
Tire changer car lift Parking lift Wheel balancer They are in stock and we ship Canada wide 1-800-361-4095 Grand Prix Import has been selling Quality Automotive Equipment since 1977 in the Canadian market .**Tire changer • It allows to dismantle and mount tires on steel and alloy wheels up to 21"in diameter • Plastic protectors are provided to for the alloy wheels.
- One year warranty on parts. We have all spare parts in stock. -Transport service and delivery available across Canada
-4 post parking lifts available Other garage equipment available.
-Transport service and delivery available across Canada
See my other ads !!!!!!
For more information contact us Tel:1-800-361-4095Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
47
2023 Surron Ultra Bee
Purchased last Spring. ODO 950km
No Issues, stored in heated garage. Overall Stock bike with a few upgrades below. Brakes currently swapped with front brake on the left ( Bicycle style)
Selling to purchase more track style bike
Upgraded
Stem 5mm Rise
Odi Podium Bar
Aluminum Foot pegs
KKE Wheel set (21",18") and Dunlop TiresSpare
2 sets of brake pads, Set of Hand guards, Stock wheel set
-
48
- rekluse clutch
- unbreakable front break/clutch leavers
- oil & air filter change every 10 hrs
- near new chain, front & rear sprockets & rear tyre
-FMF powerbomb pipe and muffler
-
49
Shot
Clutch kit / Ryders
Full jaws exhaust
CFR grips
Chaincase just serviced
Compression just checked
Avid drivers
No missing lugs
2020 exbert shocks with 1200k
Name on tunnel
Just a sticker
New plugs and ignition wires
-
50
2017 KTM 500 EXC-F street legal.
107.6 hours on motor. 4627km
FMF pipe, newer front tire, rear has lots of life, black plastics, swing arm guard, skid plate, carbon fork shields. Brand new Quantam fuel pump, in line filter. Brand new back brake disc, rear caliper / pads, throttle, grips and battery.
Great bike! Would make an awesome snow bike conversion.
Comes with a stand, softer springs front and rear, oil / filters, brake fluid, original plastics, air filter cleaner, valve shims.
Only selling due to a pretty bad head injury in the summer..
Fresh oil change, clean air filter and valve clearance are in spec. She’s ready to rip!! Would make a sick snowbike.
I bounce in between Grande Cache and Golden.
NO TRADES!!