Cars & vehicles with in Canada.
-
1
Bon état prêt pour l'hiver
-
2
Motoneige RMK 800 2016
155 po. chenille fonctionne très bien
-
3
Shock exit pour m8 acender xf 2012 et +ajustable preload compression et rebond
-
4
Mini and narrow jack plate for up to 60hp engine, motor is electric not hydraulic, and do have a switch for it now.
-
5
2 of JET SURFBOARD 130cc gas engine, up to 40km/h speed. 10L fuel tank. 4 stroke engine, 15 HP, still in crates
-
6
Re-hauled Zodiac Milpro F-470, Comes with many spare parts and acc, roll up aluminum slat floor, (do have a rigid floor and console but selling separately), valves service has been done,
-
7
Lapworth designed sloop.
LOA: 29 feet
Beam: 9 ft 3 in
Draft: 4 ft 6 in
Engines: Yanmar diesel, 16 HP, model: 2gm20f, 321 hours and
2005 Yahama outboard, 8 HP, electric start
Sail inventory: Main, furling genoa(20 ft), furling heavy genoa (20 ft), furling jib (14 ft), spinnaker with pole.
Two burner cook stove with oven.
BBQ with rail mount.
VHF radio
GPS with depth
AM/FM radio
Anchor Windlass
-
8
Brand New 14 foot long traditionally built Painter Model Rowboat. This is the ninth Tyee I have built with lines taken off an old Tyee given to me by Dick Murphy in the late 1980's. Tyee is a beautiful, very stable boat to row, designed for fishing the Tyee Pool.
-
9
Make an offer! Escape the ordinary and embark on an unforgettable journey with the timeless 1989 SeaRay Sorrento! This remarkable vessel is not just a boat; it's a gateway to endless possibilities and remarkable memories. Whether you're an adventure seeker or a relaxation enthusiast, this classic beauty promises an exhilarating experience on the water. Equipped with cozy sleeping quarters, a fully functional kitchenette, and bathroom, this vessel combines the thrill of camping with the comforts of home.
Features:
Mechanic owned. Runs great.
5.7 Litre 260 HP Mercruiser engine last professional service 2021.
Trailer included
-
10
300 feet 3/4” nylon anchor rode in good condition plus 30 feet 7mm galvanized chain and excellent 25 pound J&L (USA) anchor. Good for boats up to about 38’. Complete kit is a fraction of equivalent new price (Over $500) at $160 and just as usable
Items are located in Ladysmith
-
11
Twin 350 Volvo 260hp
280 legs recent replacement & maintenance
Replaced carbs
Replaced canvas but needs minor repair,
3 type 31 batteries, Victron charger, Superior Hull built like a Bertram. Integrated swim grid.
Inverter, 2x 75 gal fuel, remote oil filters for easier changing,
Electric head, shower, microwave, 2 burner stove, 12/110 fridge, sleeps 4, assumable covered moorage in Victoria area with marina approval.
Needs a good cleaning.
$12,500 OBO
-
12
Excellent quality replacement wheel made in Italy. “Talon” model, 6 stainless spokes with 3/4 tapered boss - fits SeaStar / Teleflex or similar steering shafts. Selling for a fraction of new price (e.g. $250 + tax on Amazon, $289 in Steveston). Item located Ladysmith
-
13
This is a canadian made, hand laid fiberglass hull 36.5 ft sailboat. It has 4 sails, power windless with 200 ft chain and 100 ft rope, sail pack with lazy jacks and a jiffy reef, bimini with a set of screens,180 watt solar panels, Standard Horizion chart plotter, furuno radar, cabin that sleeps 6 adults, 9 cu ft fridge freezer, diesel heater, 50 gallons of fresh, 30 black and 40 diesel. Kabota 30 hp diesel with 1300 hrs. Has a recent insurance survey, fresh bottom paint, zincs and oil change. Shes ready to go. Comes with a 10 ft fiberglass tender
-
14
Very good condition John Deere 4045DF150 with rockford 4-11256 (twin disk) clutch power unit.
ONLY 2500hrsShipping available
-
15
Attachments for all makes and models of Excavators
MADE IN CANADA
2 Year WarrantyAttachments Available:
Ditch Cleaning Buckets
HD Tooth Buckets
Twist/Tilt Buckets
Extreme Duty Rock Buckets
Root Rakes
Skeleton Buckets
Hydraulic Thumbs
4 in 1 Buckets
Trapezoidal Buckets
Mechanical Concrete Pulverizers
Chuck Blades
Couplers (Pin Grab, Wedge, Hydraulic or Mechanical)
Screening Buckets
Grapples - Log, Demo, Clam-Shell, Orange Peel
Frost RippersGRITT Equipment Sales
-
16
2016 Cat 320EL with Hydraulic Thumb forestry cage for front window , also plumbed for a mulcher Hours 7760 undercarriage around 70 percent Air condition cab back up camera call Steve anytime 506 461 3657 SD EQUIPMENT LTD EXCAVATOR IS IN FREDERICTON NB ((FINANCE AVAILABLE DELIVERY AVAILABLE ))
-
17
New hydraulic pump
Requires an engine
-
18
THESE ARE TWO OKADA 2020 BUT NOW CONSIDERED 2023 HAMMERS BOTH TOTALLY REBUILT WITH STAGE 2 REBUILD KITS WHICH INCLUDED ALL NEW BUSHINGS - NEW SEAL KIT - NEW PISTONS AND TWO NEW MOIL POINTS RESEALED AT OKADA FACTORY REPAIR SHOP - BOTH WERE LITTLE USED - RESEALING DUE TO SITTING DUE TO COVID - BUT DECIDED TO MAKE THEM BOTH AS NEW c/w 6 MONTHS FULL WARRANTY FROM OKADA NORTH AMERICA STARTING THE DAY YOU RECEIVE THE HAMMER.
2020 Okada ORV7500 Hydraulic Demo Hammer Breaker Chisel Attachment Tool
LOW HOUR 2020 MODEL 7500 FT LB HAMMER USED 1 JOB BEFORE COVID - CURRENTLY FINISHED A COMPLETE REBUILT TO NEW AT OKADA'S OREGAN FACTORY REBUILD FACILITY
HAVING A COMPLETE RESEAL AND NEW NITROGEN CHARGE ALONG WITH NEW FACTORY PISTON AND ALL NEW BUSHINGS AND SEAL KIT COMES WITH 1 NEW OKDA MOIL POINT AND 1 AS NEW OKADA MOIL POINT SO 2 NEW POINTS
WILL BE SHIPPED DIRECTLY FROM OUR LANGLEY BC YARD THERE TO BUYERS YARD - WILL SHIP ON OUR ACCOUNT WE GET FAST SERVICE AND GREAT RATES
TAKE OKADA ORV7500 — MID CLASS HYDRAULIC BREAKER READY TO WORK FOR $60,000.00 CDN
SEE IMAGE 4 FOR A USED ONE FOR SALE THAT IS 2 SERIAL NUMBERS OFF OF OUR FACTORY REBUILT - RESEALED UNIT
AND TAKE THE OKADA TOP150 — 3000 FT-LBS CLASS HYDRAULIC BREAKER FOR $30,000.00
FRANK 604-476-7777
OKADA ORV7500 — MID CLASS HYDRAULIC BREAKER
ORV Series hydraulic breakers for use with skid steer loaders, mini and small excavators and tractor loader backhoes.
AUTO-LUBE
A central grease port with internal grease passage allows you to easily adapt the hammer to most auto lube systems.
MAIN VALVE
The internal control valve system equates to faster speeds and higher impact energy while still allowing the breaker to operate at cooler temperatures.
ACCUMULATOR
The large capacity accumulator reduces shock load in the system.
STROKE ADJUSTER
Variable speed control in the breaker maximizes productivity.
ORIGINAL HOLDING SYSTEM
The powercell is securely held inside the bracket with the head damper, reducing recoil.
LARGER N2 GAS CHAMBER
Ensures high impact power.
LONG STROKE PISTON
Increases impact power and reduces vibration and recoil.
DUAL CHISEL RETAINING PIN
Heavy-duty chisel set pins in many Okada models offer extended service life.
DURABLE BREAKER BRACKET
Includes a heavy-duty bottom plate that protects the powercell and reduces noise and vibration.
Technical Data
IMPACT ENERGY CLASS 7500 ft-lb / 10170 JOULES
OPERATING WEIGHT 5950 lbs / 2698 kg
OIL FLOW 63-72 gpm / 238-272 lpm
FREQUENCY 230-400 bpm L-mode / 270-470 S-mode
OPERATING PRESSURE 2320-2600 psi / 157-180 bar
MECHANICAL ENERGY 98-133 HP / 73.4-99.5 KW
MECHANICAL ENERGY AVG 115.5 HP / 86 KW
UNIT WORKING LENGTH 124 in / 315 cm
TOOL DIAMETER 6.1 in / 155 mm
TOOL WORKING LENGTH 30.2 IN / 767 MM
85DB(A) LEVEL DISTANCE 119-167 ft / 36-51 M
CARRIER WEIGHT RANGE 60-92 lbs. / 27-42 M tonOKADA TOP150 — 3000 FT-LBS CLASS HYDRAULIC BREAKER
Okada’s medium class breakers are available in a wide range of designs, from those specifically engineered to provide maximum impact energy for the toughest rock applications to others suited for a combination of concrete and rock breaking with the potential for faster blow speeds.
Precision machining processes and strict Okada quality control are used to produce all main breaker components. There is no need for complete assembly replacements and the use of high precision parts mean economical, labor-saving rebuilds of your Okada breaker.
Breaker brackets are made of heavy gauge high tensile steel plates and are designed to give maximum protection to the breaker body and dissipate heat while making it easier to access the equipment during daily maintenance inspection.
Okada bushing designs, a special heat treatment process and individually lubricated bushings enhance the service life of wear parts.
Technical Data:
IMPACT ENERGY CLASS 3000 ft-lb / 4068 JOULES
OPERATING WEIGHT 3000 lbs / 1361 kg
OIL FLOW 30-35 gpm / 114-132 lpm
FREQUENCY 600-750 bpm L-mode
OPERATING PRESSURE 2030-2620 psi / 140-180 bar
MECHANICAL ENERGY 42-63 hp / 31-47 kw
MECHANICAL ENERGY AVG 52.5 hp / 39 kw
UNIT WORKING LENGTH 94 in / 239 cm
TOOL DIAMETER 4.8 in / 122 mm
TOOL WORKING LENGTH 24 in / 610 mm
CARRIER WEIGHT RANGE 28-42 lbs. / 13-19 M tonWE ALSO HAVE A $80k NEW OLD STOCK OKADA DEMOLTION PROCESSOR THAT FOR 200-350 CLASS MACHINES - SEE MY OTHER ADS FOR $35,000.00
-
19
FITS 250-500 CLASS EXCAVATORS - $92k REPLACMENT COST
BRAND NEW EXTREME DUTY EXCAVATOR MOUNTED LOGGING 20K CAPACITY GRAPPLE C/W WITH NEW CUSTOM EXTREME DUTY $7500.00 BOLT ON TOP PLATE SYSTEM - THIS IS NOT A WELD ON SYSTEM BUT CUSTOM ONE WAY THREADED BOLT ON SO YOU CAN CHANGE EAR SETS QUICKLY WITH ONLY A MILWAUKEE ELECTRIC IMPACT REQUIRED ON ONE WAY EASY ACCESS BOLTS
TAKE THIS 85,000.00 PLUS COST OF TOP PLATE SYSTEM GRAPPLE FOR $45K JUST LOWERED THE PRICES TO MOVE THIS EQUIPMENT QUICKLY - FRANK 604-476-7777 OR TOLL FREE Phone : 1-(833) 693-9323 ONLY SELLING AS LEAVING BC TO MOVE TO OUR NEW HOME IN NB AFTER 53 YEARS IN DEMOLITION - TRUCKING
MODEL T40HPX-114 2 CUBIC YARD 360 DEGREE ROTATION GRAPPLE 19000 LB CAPACITY - BRAND NEW DEMOLITION OR LOGGING GRAPPLE WITH HPX DRIVE NO HYDRAULIC CYLINDER GRAPPLE
CURRENTLY AT DC WELDING WHO IS INSTALLLED A BRAND NEW BOLT ON TOP PLATE WITH 90MM PINS WITH 12.80 INCHES BETWEEN THE EARS TO PUT ON A PC360LC-10 WITH GEITH PIN GRABBER COUPLER - THAT EXCAVATOR IS NOW SOLD.
WE WERE ALSO GOING TO MOUNT ON OUR LONG REACH PC450LC-8 KOMATUD WITH PIN GRABBER MOUNT BY BUILDING ANOTHER 100 MM BOLT ON TOP PLATE
HAS CONSTANT HI-PRESSURE GRABBING FORCES AND DOES NOT RELEASE PRESSURE UNTIL DONE BY THE OPERATOR
THIS USES A HELIX STYLE DRIVE AND INTERNAL ROTATOR - IT HAS A QUICK CHANGE GRAPPLE SYSTEM TO CHANGE TO MULTIPLE CHOICES FOR DIFFERENT GRAPPLE ARMS FROM LOGGING - DEMOLITION - ETC
BASE GRAPPLE NEW IS OVER $85,000.00 PLUS OVERSEAS SHIPPING - CUSTOMS AND 16 WEEKS OF LEAD TIME
PERFECT FOR UNDERWATER WORK, LOGGING OR DEMOLITION AS NEVER EXPOSE HYDRAULIC CYLINDERS WHEN WORKING
TAKE THIS NEW GRAPPLE TODAY FOR $45,000.00 WITH THE NEW BOLT ON TOP PLATE IN PLACE
ONLY SELLING AS WE ARE RETIRING AND SELLING ALL MY EXCAVATORS AND ATTACHMENTS
JUST LOWERED THE PRICES TO MOVE THIS EQUIPMENT QUICKLY AS RETIRING BACK TO OUR NEW HOME IN NB DUE TO HEALTH ISSUES FROM THE FOREST FIRE SMOKE PARTICULATES AND EXTREME TRAFFIC AND ITS SMOG IN THE FRASER VALLEY AND CLEARING OUT MY YARD TOTALLY
WILL SHIP QUICKLY WE GET GREAT RATES AND SERVICE AND CAN HAVE A TRUCK UNDER IT NEXT BUSINESS DAY
FRANK 604-476-7777
THIS GRAPPLE WILL PIN ON THE FOLLOWING MACHINES DIRECTLY OR ANY PIN GRABBER THAT TAKES 90 MM PINS WITH 12.80 INCHES ACROSS THE BOTTOM MOUNT
Case CX240
Case CX240
Case CX290
Case CX290Komatsu PC240
Komatsu PC240
Komatsu PC250-6
Komatsu PC270
Komatsu PC270LC-6
Komatsu PC270LC-7
Komatsu PC280
Komatsu PC280
Komatsu PC290Link-Belt 240LX
Link-Belt 290LX
Link-Belt 3400 QUANTUM
Link-Belt 3900 QUANTUMALL PARTS AND QUICK CHANGE GRAPPLE SHELLS (ARMS) ARE AVAILABLE FROM:
KINSHOFER Canada
5040 Mainway Drive, Unit #11
Burlington, ON, L7L 7G5
Tel.: +1 (905) 335 2856
Fax: +1 (905) 335 4529
Toll Free (North America): 1 (800) 268 9525
Email: sales-northamerica@kinshofer.comKINSHOFER GmbH is a leading manufacturer of attachments for truck cranes and excavators for the most important industries worldwide.
From our headquarters in Holzkirchen, Bavaria, we offer our customers an extensive range of attachments for equipment carriers with or without hydraulics for scrap, demolition, track construction, landscaping, general construction, snow clearing, excavation, road construction, forestry, recycling, etc.
The continuing demand for transportation and infrastructure is constantly driving our product development and the service we offer. As a result, we are continuously expanding our product range in order to develop and produce technical highlights in the industries.
The cylinderless and low-maintenance technologies that are used for the HPXdrive on grapples or the NOX tiltrotators and TC tilt couplers are examples of these innovations, as are the products for special requirements or unusual uses from our special solutions department.
With high quality, variety and the latest technology, KINSHOFER crane and excavator attachments set standards worldwide.
Technologies - HPXdrive Excavator
Functional exchange, depending on demands!
During times of growing costs and environmental awareness, efficient working is getting more and more important.
The HPXdrive stands out thanks to its extended lifetime compared to a conventional cylinder-driven grab.Compared to conventional cylinder grabs, the closing force of the HPXdrive is high and constant during the entire operation.
The movement of the arms is generated by two hollow shafts, which run opposd and have a helix thread, hydraulically driven by a single piston.
The resulting closing force is always the same no matter the position of the shellsThanks to the shell exchange system you are able to clearly lower the investment costs for your fleet.
Just change fast and easy to the suitable shell option depending on the task.
The reliable shell exchange system features an easy loosening of the shells in case of exchange and a safe and steady holding of loads during every task.
Setup times can be reduced to a minimum.
The flexibility of your work processes as well as your competitive abilities can be increased.
-
20
HINO 185
Good cab, motor and transmission
Hiab crane
Runs good
Requires brakes (rusty and sticky)
Idea for farm, automatic and crane would be very useful
Crane can be sold separate
-
21
For sale a new Rockwell automatic slack adjuster part # R80 1073 asking $100.00 phone 902 860 1224
-
22
Tire machine 1-800-361-4095 ** ** Tire machine MONDIAL TC-325 HelpvSwing arm Tire changer with Bead Blaster It allows to remove and install regular low profile/runflat tires up to 24 "in diameter thanks to the pneumatic Help arm. Plastic inserts are provided to protect the alloy wheels.
TC-325 Specifications
Rim clamping outside 10"-22"
Rim clamping inside 12"-24"
Motor: 2HP, 15 AMPS, 120V/60Hz
Maximum Tire Diameter 41"
Wheel width:3’’-15"
Operating pressure 115-145 psi
- One year warranty on parts. We have all spare parts in stock.
-Transport service and delivery available across Canada, can be picked up at the local terminal delivery fees applies.Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
23
-PISTON RING SET, HASTINGS #2C7859 (STD), CONTINENTAL TRACTORS N-Y-F SERIES. $50.00/set.
-ROD BEARING SET, TRW #CB726P/3764CP, FOR BUDA 4CD C645-6DC844, 6MO SERIES. $40.00/set.
-(4 only) ENGINE VALVES, MCQUAY NORRIS #V1139, 4-CYL CASE, CO-OP, WAUKESHAW FC-FK-6Z-KA, 1935-41. $20.00/4.
-(2 only) VALVE GUIDES, MCQUAY NORRIS #G497, FOR ALLIS CHALMERS 1956-59, D17-WD45D, BUDA. $5.00/2.
Check part numbers for all applications.
PICK UP IN HAMMONDS PLAINS. Shipping available by Canada Post at cost.
-
24
1970 duster 340 4 speed pistol grip. New OEM front end, new stereo, heater. Runs and drives straight and stops good. Interior very good, dash has no cracks, carpet in good condition. Striking color with flat black finish. Shows well, more pics if required.
PHONE CALLS ONLY.
Call Al @ Six Zero Four 644 6789
-
25
Stock #:5216 Exterior Colour:White Engine:Cummins ISX Horsepower:500 Transmission:18 Spd Auto Front Axle:13,200 Rear Axle:Super 40s Gear Ratio: 3.73 Frame:3/8 Brakes:Jake Suspension:Air Trac Wheelbase:238.0 Mileage: 303K Miles / 487,630 Km ISX 500 HP, 18 Spd Auto, 13,200 x Super 40s Axles, 72in Sleeper Cab, Loaded Interior with, AM / FM / CD, Nav, Power Windows, Locks, Mirrors, Smart Wheel, CB Radio, Webasto, Power Group, Esbar, Inverter, Fridge, Closet, Fenders, Sliding 5th Wheel, Full Lockers, Nice Truck, 303K Miles!
Engine: CUMMINS ISX
-
26
1931 Ford Deluxe Roadster. Off frame show quality restoration using original parts. Every available option. Runs and drives like it looks
-
27
Selling my 1965 Pontiac Parisienne Custom Sport.
283 (4.6L), Powerglide.
Hundreds of hours invested in fixing it and thousands of dollars in parts.
Car runs and drives, needs 3 out of 4 brakes serviced and some brake hard lines replaced.
Floors are cleaned and treated with POR15 3 step rust protection (there are a couple 1mm holes on the driver floor pan and in the trunk), overall in good shape.
Roof treated, channels fixed, new vinyl top installed.
The interior will need to be reupholstered so it's one color. New rear panels included.
Transmission is dripping, but works fine, will need to be checked.
Needs new tires, brake job, maintenance and it's ready to go back on the road.
Funny fact - the original owner in 1965 is Marge Simpson.
-
28
1929 Ford Model A Sedan like new. Fully restored 3 years ago. Off frame restoration, steel body, new paint, under side all finished like new. It is powered by a honda v6 700r4 transmission. Jaguar rear end, 4 wheel disc brakes, gauges, heater, all new interior and carpets. Execellent drive and lots of power and steers well. Costed $70,000 to restore and only 3600 km put on car since. Needs nothing turn key. Very economical car, goes forever on 1 tank of fuel.
CALL AL @ Six Zero Four 644 6789
No text messages
-
29
1962 Cadillac convertible. Olympic white with original blue leather interior. Fully restored. Has only 72,000 original miles. Excellent condition.
-
30
Rev up your style game with the 1981 Mercedes-Benz 380SL in Silver Blue Metallic – a showstopper from the iconic R107 SL-Class! Ready for a V8-powered adventure? This classic beauty, adopted in 2020, is now your ticket to turning heads on Vancouver streets! ️ #ClassicCarVancouver #MercedesBenz380SL
Whether you're rocking the blue convertible soft top or the sleek hardtop roof, this ride is your daily dose of glamour. Picture-perfect in Blue MB-Tex vinyl and Zebrano wood veneers, it's a luxurious haven on wheels! ✨ #LuxuryCarsYVR #VancouverRides
Cruise in comfort with modern amenities like cruise control, power windows, and power door locks – this car is all about making your drive as smooth as the Vancouver skyline. ❤️ #CityCruisin #VanCityStyle
Beneath the hood, a robust 3.8-liter M116 V8 engine is ready to unleash power and torque, making every ride an exhilarating experience. #V8Power #ClassicCarLove
Own a piece of Vancouver's automotive history – the meticulously
-
31
1969 Camaro - Trades Considered
This 1969 Camaro is Hugger Orange with Black SS Stripes. It has the Camaro Black Interior which is in excellent condition.
Professionally Built Supercharged 350 SBC - Turbo 350 Transmission.
Approx 700 horsepower.
The motor was professionally built to handle the blower with no expense spared. The motor is a 350 Chevrolet with a 671 blower. All of the engine internals are custom and the pistons are forged for the blower application.
It's a roller rocker motor, has hydraulic cam shaft, double roller timing chain and gear set.
The transmission is a turbo 350 with a manual valve body, 2600 stall converter. It also has a trans brake.It has full Art Morrison suspension, 9 inch rear end, Wilwood 4 wheel disc brakes and a custom Borla stainless steel exhaust.
If you have any questions please let me know. If you send me your number I will text over some photos and videos
If the ad’s up it’s available. I can assist with enclosed Transport if necessary.
Trades considered for Corvette ZO6, Camaro SS, Camaro zl1, Mustang, Collector Car etc. Cash either way.
-
32
1933 Willys pro street 350 dual 4barrel carb. 350 transmission. Nice paint, 9inch ford. lexon side windows. Tilt steering on S10 frame, new front end drives steers and stops good.
PHONE CALLS ONLY
Al Six Zero Four 644 6789
-
33
67 mustang Cal Special Clone,
Fresh paint and stripes
As seen car is literally new,new sheet metal starting from Trunk, inside outside,New Shelby Trunk Lid, Gas Tank,quarter panels, complete floor board one piece from rear to front with all new frame rails from rear to front,rockers, torque boxes,
Firewall to bumper all new sheet metal, new rad,etc, etc
0 miles on brand new Rebuilt 289 with brand new 4 B carb,
0 Miles on rebuilt transmission,New Hood,Bumpers,Wiring harnesses, etc etc..,
New interior kit , new seats upholstery,
Headliner, Dash stuff,
Absolutely no expense spared,only top quality Parts used.
Why buy your dream car that’s gonna need a restore coming up when you can get one that’s new.
Pictures taken various stages to give you an idea car was stripped to just chassis,built new to final stage
$60’s to do ……lowballing will be ignored
-
34
518 hours, like new condition inside and out. PM and servicing up to date. 16 inch digging bucket and 32 inch clean up bucket
-
35
Cat 325 Excavator Boom, $2500.00
Crowd, $2500.00
Bucket Cylinder, $1000.00
Quick Change, $1500.00
all fob Creston, B.C.
-
36
New Sany SY35U CAB Mini Excavator in stock
Experience one the best standard warranties on the market - 5 Year / 5000 Hr!
This Sany excavator features:
• Zero Tail Swing is ideal for tight job sites and working in confined spaces
• Independent Boom Swing
• Enclosed cab with air conditioning for operator comfort
• Two Way Aux Hydraulics
• Quick Attach and Dig Bucket
• Lines are run down the boom and arm as standard for easy fit-up and running of
hydraulic attachments
• Two Speed Travel
• Load sensing hydraulics for increased fuel efficiency and maximised performance
• Operating Weight of 3,855 Kgs - 8,500 Lbs
The Sany 35U is built with the following quality components
• Yanmar 3TNV88-BDSA Tier 4F 27.4 HP Diesel Engine
• Rexroth Hydraulic Pump
• KYB Swing Motor
Financing Available - Low Rate Finance Specials Available - OACNeed Work Tools to go with this Unit? Thumb, Twist Bucket, Packer and Many other attachments are available for this excavator.
SANY hydraulic excavators are precision-engineered digging tools built with industry-leading technology and highest-grade components to offer you maximum job site productivity. Our engines deliver top performance and tremendous power, with increased fuel efficiency and low emissions. Multiple working modes, intelligent control systems and a variety of attachments and parts allow versatile operation in all kinds of work environments. Whether it’s mining, road building, civil engineering, or general construction, SANY excavators are ready and able to get the job done.
Headwater is a Better Business Bureau rated A+ and members of the Independent Equipment Dealers Association (IEDA) and Associated Equipment Distributors (AED). What does that mean for you? Shop with confidence knowing that you are dealing with a company that stands behind their machinery, attachments and service. Headwater has a fleet of over 24 Field service trucks covering western Canada and are a Sany Construction Equipment Dealer. We also service and sell all makes and models, specialising in Caterpillar, John Deere, Hitachi and Komatsu. Call or email today to talk to an equipment specialist
Please call or email for more information
-
37
Farm King 3 pt. hitch snow blade in very good condition, quick sale for $500.00
-
38
1985 Cat 926
WBM Q/A Coupler
c/w 94"" smooth bucket w/ cutting edge
Engine, injectors, turbo and compressor replaced less than 500 hours ago
We have owned since 2014, mainly used as a snow plow and forklift to move logs & timbers
Will replace broken glass
Additional photos on request
Have forklift grapple for an additional $7500
-
39
This excavator has the following specifications:
• Cummins QSB6.7 Tier 4 Engine Rated at 158 HP
• 53,250 Lb operating weight
• 10'5" Overall Width
• 31" Track Pad Width
• 21'8" Max Digging Depth
• 33'10" Max Digging Reach
This SY215C LC is equipped with:
• Cab with Heat, A/C and Stereo
• WBM Wedge Style Quick Attach
• Choice of Dig or Clean Up Bucket
• Aux Hyds - Standard on all SY215's
Optional Sany Live GPS - this system allows you to:- Track location and create Geo Fences
- Monitor and track real time fuel usage
- Send Alerts for preventative maintenance
Warranty - Sany Excavators and Wheel Loaders come with an industry leading 5 Year/5000 Hr Warranty. The warranty is backed up by Headwater Equipment’s service fleet of over 25 trucks that service Western Canada. Machine up time and customer satisfaction is a foremost priority for our service department. Shop with confidence, knowing that big or small, your machine uptime is a top priority.
Financing Available Special Low Rate Financing Deals Available
Need Work Tools to go with this Unit? Thumb, Twist Bucket, Packer and Many other attachments are available for this excavator. HD Catwalks and Forestry Protection systems available.
SANY hydraulic excavators are precision-engineered digging tools built with industry-leading technology and highest-grade components to offer you maximum job site productivity. Our engines deliver top performance and tremendous power, with increased fuel efficiency and low emissions. Multiple working modes, intelligent control systems and a variety of attachments and parts allow versatile operation in all kinds of work environments. Whether it’s mining, road building, civil engineering, or general construction, SANY excavators are ready and able to get the job done.
Headwater is a Better Business Bureau rated A+ and members of the Independent Equipment Dealers Association (IEDA) and Associated Equipment Distributors (AED). What does that mean for you? Shop with confidence knowing that you are dealing with a company that stands behind their machinery, attachments and service. Headwater has a fleet of over 24 Field service trucks covering western Canada and are a Sany Construction Equipment Dealer. We also service and sell all makes and models, specialising in Caterpillar, John Deere, Hitachi and Komatsu. Call or email today to talk to an equipment specialist
Please call or email for more information
-
40
New MS ripper to fit a D7H and R Dozer
4BBL MS Ripper fit CAT D7R D7H Bulldozer
Features:
Multi-Shank Parallelogram style ripper
4 cylinders (2 lift & 2 tilt)
Ripper designed to accept OEM style parts (Including Cylinder and Seal Kits)
Painted yellow
Ripper ships assembled complete with mounting bolts
Complete Ripper Set Including:
Ripper Structure
Three Ripper Tine with three tips
4 cylinders (2 lift & 2 tilt)
Cylinder hoses
Mounting Bolts
Transmission guard
Shipping Specs
Length: 2.4 m
Width: 2.2 m
Height: 1.35 m
Weight: 6900 lbs
Stock number ATA984
In stock ready to collect or we can ship (Call for a freight quote)
**Please call or email for more details**
-
41
2016 tigercat Ed5195 directional feller head
Ready to work no issues about 500 hrs on it
Open to offers
-
42
1998 K-Line Tandem 35 ton Double Drop
8'x33' low profile deck
Mechanical removable neck
Air ride, plumbed for booster & can renew CVIP - $25,000
1996 T/A Peerless Pole Trailer & 1999 S/A Log Jeep - CVIP when parked and will renew with deposit - $12,500
Woodmizer LT15 with 24' of track - $8500
IMAC Clam Grapple - $10,500
-
43
SY16's in Stock and Ready to Go!
Features- Auxiliary hydraulic circuit
- Units available with or without an enclosed Cab
- Limited tail swing
- Independent Boom Swing
- Comes with Sany's Industry Leading 5 Year/5,000 Hour Warranty
- Easily accessible service points that make scheduled maintenance more convenient
- Retractable Track Frames - Allow for access to tight access areas
Specifications
- Bucket Breakout Force: 3,417 lbf - 15.2 kN
- Dig Depth: 7'9in; - 2360 mm
- Engine: Yanmar 3TNV80F-5SPSK
- Gross Power: 19.6 hp - 14.6 kW
- Operating Weight: 4,023 lb -1825 kg
- Undercarriage: 9" Wide Belted Rubber Track, 3 Rollers Per Side
Warranty - Sany Excavators and Wheel Loaders come with an industry leading 5 Year/5000 Hr Warranty. The warranty is backed up by Headwater Equipment’s service fleet of over 25 trucks that service Western Canada. Machine up time and customer satisfaction is a foremost priority for our service department. Shop with confidence, knowing that big or small, your machine uptime is a top priority.
Financing Available - Low Rate Finance Specials Available - OAC
Need Work Tools to go with this Unit? Thumb, Twist Bucket, Packer and Many other attachments are available for this excavator. HD Catwalks, Forestry Protection systems, Clip on Rubber tracks (dependant on machine size) available.
SANY hydraulic excavators are precision-engineered digging tools built with industry-leading technology and highest-grade components to offer you maximum job site productivity. Our engines deliver top performance and tremendous power, with increased fuel efficiency and low emissions. Multiple working modes, intelligent control systems and a variety of attachments and parts allow versatile operation in all kinds of work environments. Whether it’s mining, road building, civil engineering, or general construction, SANY excavators are ready and able to get the job done.
Headwater is a Better Business Bureau rated A+ and members of the Independent Equipment Dealers Association (IEDA) and Associated Equipment Distributors (AED). What does that mean for you? Shop with confidence knowing that you are dealing with a company that stands behind their machinery, attachments and service. Headwater has a fleet of over 24 Field service trucks covering western Canada and are a Sany Construction Equipment Dealer. We also service and sell all makes and models, specialising in Caterpillar, John Deere, Hitachi and Komatsu. Call or email today to talk to an equipment specialist
Please call or email for more information
New 2019 Sany SY16C Mini Excavator, OROPS open cab, Yanmar 3TNV74F Tier 4 Final 15HP Engine,
Maximum Digging Depth of 7'9", operating weight of 4,023 lbs
Pattern Change Valve, Aux Hyd, 9 " Rubber Tracks
With retractable tracks perfect for tight areas, doorway or gate entrance.
Removable ends on blade
Yanmar engine .
Great for landscapers or basement contractors.
0% financing deals available for 24 or 36 months
0.99% for 48 months
1.99 for 60 months
OAC
Call or email for more information
-
44
1997 Trail-Eze 25t trailer for sale. Spring suspension and foldown ramps. 8'6" wide, 40ft length overall with a 24' deck. New Jack and 8 brand new tires. Ready to work, has MVI. Deck recently done and in sound shape.
-
45
Restoration project
Need engine work and rear rim and tire
Text me if you are interested
-
46
Only 440 hrs. Runs great.
-
47
2009 Sterling Bullet 5500
6.7L Cummins Diesel
Automatic Transmission
198738kms
4x4
Power Windows
Power Locks
Fresh CVIP
Steel Flat Deck
-
48
Runs great, comes with combos on machine.
-
49
SKI-DOO SUMMIT X 154 800 E-TEC 2015 ORANGE COMPETITION no de d'inventaire PRI10905 Communiquez avec nous nous avons le véhicule qu'il vous faut. Les images présentées sont à titre indicatif seulement. Le véhicule illustré peut être doté d'équipements offerts en options. Performance NC Carrier Harley-Davidson et Carrier BMW ne peuvent être tenus responsables d'une omission des erreurs typographiques ou autres y compris les erreurs de transmission de données d'affichage ou des erreurs logicielles qui pourraient se trouver sur le site. Pour connaître tous les détails et valider l'exactitude des informations consultez l'un de nos conseillers aux ventes.
-
50
Motoneige Artic Cat Z120 en très bon état. Presque pas servi. Acheteur sérieux seulement $2,000