MTX X3-17-THUNDER8 Audio Kit For 2017-up Can-Am Maverick
Description
MTX X3-17-THUNDER8
Audio upgrade kit for 2017-up Can-Am Maverick X3 models: includes digital media receiver, six speakers, 4-channel amp, mono amp and two 12" subwoofers
Maximum audio performance for your Maverick
The MTX X3-17-THUNDER8 kit is the biggest, baddest audio and light upgrade around for your 2017-up Can-Am Maverick X3. This truly thunderous 8-speaker kit includes the MTX AWMC3 digital media receiver with a custom dash kit, two 4" MTX X3-17-FS-U dash pod speakers, two 6-1/2" MTX X3-17-FS-L RGB LED speakers in custom kick panel pods, two 12" underseat subwoofers, two MUD65PL RGB LED cage speakers, a powerful 4-channel amplifier, and a mono amplifier to power the sub, plus all the wiring and brackets you'll need for a hassle-free installation.
It all starts in the dash
The heart of this system is the MTX AWMC3 multimedia controller. With this rugged, all-weather controller, you can enjoy all your favorite tunes from a variety of sources, while tracking the tunes on the 3" color TFT display. There's an AM/FM/WB tuner, built-in Bluetooth connectivity for music streaming, plus an AUX input and a charging USB input. The AWMC3 also works with a SiriusXM tuner (sold separately, subscription required).
The low-profile MTX X3-17-DK dash kit mounts using the existing factory mounting points, allows full access to the factory fuse panel, and won't interfere with factory or aftermarket intrusion bars. The color and texture match your Maverick, so you'll get a smooth, factory look.
Power from the pods
Each rugged, weather-resistant dash pod houses an outdoor-ready coaxial 4" speaker with a neodymium motor structure that produces clear, powerful sound. The pods mount directly into existing upper dash locations, so installation is pretty straightforward. MTX's Rider Aligned Acoustical Design (R.A.A.D.) delivers outstanding on-axis performance for maximum volume and clarity.
Cool kick panel speakers
Each molded and sealed kick panel pod houses an outdoor-ready coaxial 6-1/2" RGB LED speaker with a polypropylene woofer and Mylar dome tweeter. The durable finish provides a smooth, subtle factory look, and these speakers won't get in the way if you decide to install an aftermarket cage. These speaker pods mount directly into the lower kick panel locations — no cutting or drilling required. The RGB LED lights are built into the speakers, and they'll look great during your next evening ride.
Cage speakers, too
This top-of-the-line package also includes a pair of MUD65PL tower speakers. These compact RGB LED speakers feature 6-1/2" woofers and soft dome tweeters that produce plenty of sound. The adjustable clamps (included) rotate for perfect positioning, and you can customize the lighting with the included MUDLEDC remote and control harness. The low-profile mounting brackets will fit 1.75", 1.85", and 2" bars.
A pair of powerful, compact amps
The MTX MUD100.4 full-range Class D amp gives what you want from a UTV amp — outstanding sound quality and excellent thermal efficiency. This compact, marine-rated 4-channel amp pumps out 50 watts RMS per channel, so you'll have the juice you need for the great sound you want.
For the subwoofers, there's the MTX MUD600-1 mono amp. This remarkably compact all-weather amp uses Class D technology to produce a remarkable 650 watts of RMS power at 2 ohms, so your system's subs will get the right amount of oomph.
A big beat under the seats
MTX's X3-17-SW-D (driver's side) and X3-17-SW-P (passenger's side) underseat subwoofer enclosures bring outstanding bass performance to this system. Each rugged slimline enclosure houses a 12” shallow-mount, down-firing sub that can handle up to 300 watts of power. The enclosures mount directly under the front seats and they won't impact seat adjustability. There's an integrated waterproof harness, too, so you can connect the subs to the MTX MUD600-1 mono amp with minimal hassle.
Bluetooth note: Use of this receiver's Bluetooth features will depend upon your phone's Bluetooth capabilities. Learn more in our article explaining Bluetooth profiles.
iPod®/smartphone note: If you're going to use your iPod or smartphone with this receiver, be sure to check "Details" for compatibility information.
Product highlights:
8-speaker system designed for select 2017-up Can-Am Maverick X3 models
includes digital media receiver w/dash kit, dash pod speakers, kick panel speakers, cage speakers, 4-channel amp, mono amp, two 12" subwoofers
also includes RGB controller, amp mounting bracket, subwoofer remote, dash kit, and wiring
MTX AWMC3 all-weather multimedia controller
marine/powersports digital media receiver with AM/FM tuner (does not play CDs)
built-in amplifier (20 watts RMS/50 peak x 4 channels)
built-in Bluetooth for music streaming (will not make calls)
SiriusXM Radio ready (tuner and subscription required)
3" color TFT display
MTX X3-17-FS-L kick panel speaker pods
custom-fit pods with integrated 6-1/2" RGB LED speakers (pair)
water-resistant polypropylene cones and Mylar dome tweeters
UV-resistant finish matches your Maverick's interior
MTX X3-17-FS-U dash pod speakers
custom-fit pods with integrated 4" coaxial speakers (pair)
water-resistant polypropylene cones and Mylar dome tweeters
sealed pods bolt into OEM mounting holes — no drilling required
MUD65PL cage-mount speakers
RGB LED speakers with 6-1/2" woofers and soft dome tweeters
adjustable clamps rotate for perfect positioning
low-profile mounting brackets will fit 1.75", 1.85", and 2" bars.
MUD100.4 amplifier
50 watts RMS x 4 channel at 4 ohms
compact Class D design
conformal-coated circuit boards
made for off-road use
MUD600-1 amplifier
650 watts RMS x 1 at 2 ohms
compact Class D design
conformal-coated circuit boards
made for off-road use
MTX X3-17-SW subwoofers (pair)
12" subwoofers in custom underseat enclosures
designed to fit under your Maverick's driver and passenger front seats
sealed waterproof design
integrated sound damping
warranty: 2 years
MFR # X3-17-THUNDER8
What's in the box:
MTX X3-17-THUNDER8 owner's manual
This MTX sound system contains 15 individually packaged items:
AWMC3 Bluetooth Media Controller:
Digital media receiver
Wiring harness
Trim-ring
Mounting plate
Mounting bracket
4 Machine screws
4 Self-tapping screws
Owner's Manual
MUD100-4 Amplifier:
4-Channel amplifier w/attached 15" input and output harnesses (inline 30A ATO fuse)
Four 3/4" screws
Quickstart guide
MUD600-1 Amplifier:
Mono amplifier
12" 14-Gauge speaker harness
12" 10-Gauge power wire (male bullet plug on the amplifier end)
12" 10-Gauge ground wire (female bullet plug on the amplifier end)
12" 18-Gauge turn-on wire (female bullet plug on the amplifier end)
Four 3/4" Screws
Owner's manual (English/ Spanish/ Portuguese/ French)
4" Dash Speakers:
2 Loaded 4" dash enclosures w/attached 2' wiring harness
Two 15mm screws
Four 10mm screws
Eight 8" wire ties
Owner's manual
6.5" Kick Panel Speakers:
2 Loaded 6.5" kick panel enclosures w/attached 28" input harness
2 Mounting brackets
4 Mounting clamps
4 Mounting bases
44" 2-Wire harness (ring terminals on one end / bare-ended wire on other end)
25mm hole-saw bit
2 Crimp connectors
Four 40mm hex-head bolts
Eight 15mm hex-head bolts
Eight 8mm hex-head bolts
Eight 8" wire ties
Owner's manual
Driver & passenger mounting templates
MUD65PL Cage-Mount Speakers:
Two 6.5" enclosed RGB speakers w/attached 39" wire harnesses
2 Swivel bases
8 Clamps (2 ea. for 1.5" / 1.75" / 1.85" / 2.0")
Two 2" flange-bolts
Eight 1/2" bolts
1 Flange-nut
2 Logo badges
Owner's manual
Under-Seat Subwoofer Enclosure (Driver side):
Loaded 12" custom subwoofer enclosure w/attached 15" wiring harness
15" Mounting bar
76" Loomed speaker harness (watertight connectors on both ends)
M6 Drill bit
Three 40mm Torx bolts (T40)
Five 14mm Torx bolts (T40)
18" Strip of adhesive foam
Eight 8" wire ties
Owner's manual
Manual addendum
Under-Seat Subwoofer Enclosure (Passenger side):
Loaded 12" custom subwoofer enclosure w/attached 15" wiring harness
Five 14mm Torx bolts (T40)
18" Strip of adhesive foam
Eight 8" wire ties
Owner's manual
Manual addendum
MUDLEDC RGB LED Controller:
Hand-held remote control (installed CR2025 battery)
14" Wire harness w/inline controller
8" Connection harness
Owner's manual
Dash Mounting Kit:
Radio housing
Mounting bracket
Four 25mm screws
Two 6mm screws
Two 15mm screws
Sixteen 8" wire ties
Owner's manual
EBC-01 External Bass Control:
Remote bass control w/attached 20' cable (3.5mm TRS connector)
Remote knob
Mounting bracket
Decal w/level increments
4" wire tie
Mounting screw
Two 3/4" screws
Mounting nut
1 Large flat washer
2 Small flat washers
2 Lock washers
X3-17-CORE:
Amplifier mounting plate
10.5' Power/ground harness w/inline fuse holder
2' Speaker T-harness
2 Bar-mount clamps
60A Maxi fuse
Two 15mm hex-head bolts
Eight 6mm hex-socket screws
2 Flange nuts
Adhesive foam pad
Sixteen 8" wire ties
PS-REARHAR-1 Rear Speaker Wiring:
15' Rear speaker harness
Eighteen 7.5" wire ties
AWMC3 Amplifier Harness (1-10823):
28" Wire harness (Molex plug-to-RCA)
AWMC3 Speaker Harness:
55" 12-Pin harness
- For Sale By: Owner
- Ad Type: Offering
cars & vehicles | ATVs, snowmobiles | ATVs
2023-02-18