900 hp Pontoon Boat with Polyethylene Pontoons - build your boat
Description
NEW 900 hp !!!! Pontoon Boat with Polyethylene Pontoons HDPE tested
SELLING OUT QUICK RIGHT NOW, WHILE SUPPLIES LAST !
We offer high-end Polyethylene Pontoons to built a pontoon boat, work boat, transport vessel, houseboat, etc.
Exclusive with us:
Patent 29 inch diameter Polyethylene Pontoon Tubes (aluminum pontoons are mostly 24/25 inch)
Front section is 1,650 mm (5.4ft) long
Standard sections are 1,100 mm (3.6ft) long
ALLREADY 1,000 times approved and now even up to a 900 hp Tritoon tested in the ocean.
NOT ONE PONTOON BOAT BUILDER IN THE WORLD OFFERS THAT, NOT EVEN FOR ONE OF THERE OVER $ 100,000 CHEAP BUILT PONTOON BOATS !!
Polyethylene (HDPE) pontoons are higher quality than cheap aluminium. Almost indestructible !!!
Houseboats worth a couple $100,000 sitting on Polyethylene tubes, because better flotation, safer, ridged, impact resistant, saltwater resistant, no corrosion etc...etc..
Our unique patent floating bodies form the best foundation for pontoon constructions of any kind to build a new projects, add a third tube or to replace old pontoons.
With our basic material HDPE (high density polyethylene), our floating bodies are produced by the rotary process. Due to its UV resistance, our float is nearly impossible to destroy, scratches and cracks can be easily welded. The walls, which have a thickness of 8mm, are provided with 8 M10 nuts. This allows the top deck to be fastened quickly and easily.
Optimum sliding properties as well as an ideal traceability are ensured by the multi-chamber system as well as the streamlined shape.
The material polyethylene is resistant to oils, acids, fuels, salt water and guarantees a clean cleaning. No special cleaning agents are required for cleaning. Our floats are ideally suited for year-round use if heated or in open water for cruise and fishing boats, house boats, float bars, work platforms and many many more projects.
The 8mm strong tip is optimally adjusted to all loads, both in slow and fast driving. It is produced by the rotary process, the wall thickness is 8 mm. It is fitted with 8 pieces of M10 nuts, to ensure easy fixing of the top deck.
The 8mm strong mid / end part is optimally adjusted to all loads, both with slow and fast driving. It is produced by the rotary process, the wall thickness is 8 mm. It is provided with 8 pieces of M10 nuts, to ensure easy fixing of the top deck.
Any project lenght and width are possible !
No problem to add on a piece later, so you can start small and make it bigger later.
1,000th of possibilities to use our tubes.
SO GET YOUR PLANS READY AND MAKE YOUR DREAMS COME TRUE
- For Sale By: Owner
- Ad Type: Offering
cars & vehicles | boats, watercraft | Other
2023-04-05