Cars & vehicles with in Canada, Alberta, Ft Mcmurray.
-
1
2 units available
- Wacker Neuson E1100 ground thaw units
- both have diesel burners
- both simply require 125vac power @ 15amp. Standard house stuff
- 2000sq/ft units
- serviced and ready to go
- central alberta
- one has 5500 hours, other has little over 10,000 hour
- both can be seen operational prior to purchase
West of lacombeGround heater
Ground thaw
E1100
E3000
E5000
E6000
Pure heat
Dry air
Dryair
Hydronic heater
Propane
Diesel
6kw generator
8kw generator
10kw generator
15kw generator
20kw generator
35kw generator
40kw generator
45kw generator
50kw generator
55kw generator
60kw generator
65kw generator
70kw generator
75kw generator
80kw generator
85kw generator
90kw generator
95kw generator
100kw generator
105kw generator
110kw generator
115kw generator
120kw generator
Stand by generator
Towable generator
Job site generator
Trailer generator
Back up generator
Off grid generator
John Deere generator
Kubota generator
Cummins generator
Gen Set
Portable Power
Portable Generator
Mobile Generator
Diesel Generator
Generator
Diesel Generator
Gen Set
Generator
Magnum
Generac
Cummins
Light tower
Light plant
Whisperwatt
Backup generator JLG , Genie , Caterpillar , D9 , Hitachi , Kubota, Doosan, Wacker neuson , John deere , Isuzu , Bobcat, Grader , 140G , Komatsu , Bell , 140H , DOZER , CAT, JLG , Genie , Caterpillar , D9, D9T , D6 , Hitachi , Kubota, Doosan, Wacker neuson , John deere , Isuzu , Bobcat , Bomag , Hamm , Skyjack Backup power, Standby generator ,Construction, generator, Light plant, Light tower Wacker , Mq, Multiquip , Teresa, Caterpillar , Cummins ,Isuzu, Genrac, IR, Honda, Yamaha , Mitsubishi ,John Deere, Dewatering, bulldozer , skidsteer
-
2
Grill, front and rear bumpers off 2018 Jeep Wrangler Sahara. In great shape. Stored inside
$250 for all 3 pieces
Or
$100 for each piece if sold separately
Located in Wandering River, AB
-
3
Selling rear bumper off sled as I put a tow bumper on instead
-
4
PHONE ONLY
TXT or call (780) 881-0024
-
5
Two soft tops for a Jeep Wrangler JKU 4 door for sale.
(Should fit 2007-2018)
-OEM soft top with all necessary hardware
-Smittybilt Extended Top and tonneau cover (761335 + 94535)
No installed photos as I have not had them installed since I have owned the vehicle. Have been stored indoors. Condition of canvas and windows is very good
-
6
265/60/r18
-
7
275/55/20 4 winter tires for sale . Posted in vehicle parts, tires, accessories, tires, rims in Fort McMurray. November 24, 2022
-
8
**2021 skidoo summit sp 850 E-Tec 165” track
Still 41% break in left, 279km on machine. Beautifully wrapped ($850.00 wrap), lady driven, comes with new spare belt
Asking $20,000
**2019 Polaris rmk 800, 155” track, 3” lug
40.4 riding hours, 985kms on machine, comes with new spare belt
Asking $16,000
**2019 Alcom Hybrid 12’ skidoo trailer
Excellent condition
Asking $12,000
Or take the whole package for $45,000.00
-
9
ALL NEW ROUGH MASTER RT TIRES
♦Tri-Peak Snowflake Rated
♦Available in 10 & 12 Ply
♦Pricing for all 4 Tires Below:
24''
33x12.50R24 12 Ply --- $1228 All 4
22''
35x12.50R22 12 Ply ---- $1344 All 4
33x12.50R22 12 Ply ---- $1199 All 4
305/40R22 12 Ply ------ $1092 All 4
305/45R22 P Rated ---- $1108 All 4
315/45R22 10 Ply ------ $1288 All 4
285/45R22 10 Ply ------ $1028 All 4
20''
35x12.50R20 10 Ply ---- $1268 All 4
33x12.50R20 12 Ply ---- $1176 All 4
285/55R20 8 Ply ------ $1012 All 4
275/60R20 8 Ply ------ $1068 All 4
275/55R20 10 Ply ----- $956 All 4
18''
33x12.50R18 10 Ply --- $1184 All 4
17''
33x12.50R17 10 Ply --- $1164 All 4
285/70R17 10 Ply ----- $1064 All 4
265/70R17 10 Ply ----- $932 All 4
More Sizes COMING SOON!
BUY NOW & PAY LATER! On-Spot Approvals!
Zero Down Finance Available
Installation Available at All Grizzly Locations
FREE SHIPPING ON EVERYTHING
CALL US NOW TO ORDER OVER PHONE 7803406610
Edmonton- 7803406610
Calgary- 4032712441
Red Deer- 5876800608
Grande Prairie - 7805389952
Surrey - 6045930662
498 McCoy Drive Red Deer, AB
6311 Roper Road NW Edmonton, AB
10903 78 Avenue Grande Prairie, AB
3514 73 Avenue SE Calgary, AB
15685 Fraser Hwy, Surrey, BC
#grizzlytrucks #truckparts #trucksdaily #truck #trucks #trucksofinstagram #trucknation #trucklife #trucking #reddeer #yeg #edmonton #grandeprairie #alberta #chevrolet #chevy #dodge #ford #gmc #diesel #autoparts #wheels #tires #truckporn #truckstance #trucklife #wheeldeals #lifted #liftedtrucks #liftedlife #supportlocal
-
10
Dodge 8x6.5 factory rims 2011. Cooper discovery at 632nds approx. $600
-
11
Fits 04-11 Arctic cat crossfires.
They have been painted but are strait.
$150 obo
-
12
29 foot
5th wheel ready to go. Bathroom with Tub and Toliet.
Appliances, Fridge, microwave, Stove all working.
Trailer hitch if required.
Heat and Air conditioning.
Sleeps 4-6
Text for pictures
825-461-9511.
4000.00 Seller motivated.
780-220-0958
-
13
2014 Ford F-450 XLT Service Truck
- 6.7 Powerstroke Diesel
- Extended Cab 4x4
- 11 Foot Western Truck Body
- Positive Air Shut Off
- Onboard Honda Compressor
- Lots of Storage Drawers
- Hose Reels
- 4,500 Engine Hours
- 171,732 kms
- Seats 6
- Stock SK172
- $41,900**This truck is ready to go to work! Financing and leasing options available.
For more information, please call or text 780-972-3279. Or head to our website www.easytermauto.ca
Easy Term Auto is located at 8218 Franklin Ave in Fort McMurray, We are Locally owned and operated
**Price does not include GST or applicable financing fees.
-
14
The Rancher Bale Bed
RUGGED. DURABLE. AFFORDABLE.
C5 Manufacturing is both excited and proud to announce its latest product, the Rancher Bale Bed. This new bed will offer all the craftsmanship and rugged durability of the Chisholm line of bale beds at a lower price. The Rancher will be available in all sizes of ¾ ton and up trucks.
The Rancher Beds are available in nine different sizes.
ALL RANCHER BEDS COME WITH:
• Electric-over-hydraulic heavy duty 4 gpm power unit
• Synchronized arm cylinders
• Lifetime guarantee on arms
• Spinners for unrolling round bales
• LED work lights in the headache rack
• Tethered two-switch
• Heavy duty 2” x 4” x 3/16” rounded bent tube headache rack with louvers for stylish good looks and the ultimate in safety
• 2-5/16”, 30,000-pound rated hitch ball with 1” rise, recessed in the bed with door closure
• 1/8” Tread plate floor with component access doors. Rattle free access door for all working components under the bed including fluid fill door.
• Mud flaps
• Oval LED lighting
• Phasing arm cylinders
• 350 Amp fuse and fuse block system
• Urethane primer and paint
• Weld-on receiver hitch
• (2) Underbody boxes
• 4” sideboardsSafety Features
• Easy access to mechanical parts through large access doors
• Highly visible warning and caution decals
• 350 Amp fuse and block attached to truck frame
• Heavy duty bent tube headache rack
• Heavy duty 2-5/16th 30,000-pound rated hitch ball 1” rise
• Well-built all steel constructionOptional Features
• Remote Hydraulic Connections
• Wireless RemoteSizes and Pricing For Single Rear Wheel Trucks
Model 37N CAB TO AXLE 37.5 “ (Mega Cab Bed Delete)
Bed Dimensions: 82.5” wide x 87.75” long
PRICE: $16,622.50 + GST InstalledModel 42N CAB TO AXLE 42” (Short Bed Delete)
Bed Dimensions: 82.5” wide x 87.75” long
PRICE: $16,622.50 + GST InstalledModel 56N CAB TO AXLE 56” (Long Bed Delete Standard 8’ Box)
Bed Dimensions: 82.5” wide x 102.5” long
PRICE: $16,622.50 + GST InstalledModel 60N CAB TO AXLE 60” (True Cab/Chassis Bed Single Rear Wheels)
Bed Dimensions: 82.5” wide x 110” long
PRICE: $16,622.50 + GST InstalledSizes and Pricing For Dual Rear Wheel Trucks
Model 37W CAB TO AXLE 37.5” (Megs Cab Bed Delete)
Bed Dimensions: 95.5” wide x 87.75” long
PRICE: $16,622.50 + GST InstalledModel 42W CAB TO AXLE 42” (Short Bed Delete)
Bed Dimensions: 95.5” wide x 87.75” long
PRICE: $16,622.50 + GST InstalledModel 56W CAB TO AXLE 56” (Long Dually Bed Delete 8’ Box)
Bed Dimensions: 95.5” wide x 102.5” long
PRICE: $16,622.50 + GST InstalledModel 60W CAB TO AXLE 60” (True Cab/ Chassis Dual Rear Wheels)
Bed Dimensions: 95.5” wide x 110.2” long
PRICE: $16,622.50 + GST InstalledModel 84W CAB To AXLE 84” (84” Cab to Axle Bed Usually A True Cab/Chassis)
Bed Dimensions: 95.5 “ wide x 140” long
PRICE: $17,702.50 + GST InstalledLOCATED: Lacombe, AB
INSTALLED: Lacombe, ABFinancing Available OAC!!!
Please reply to this ad, call or text: 403-357-2725
-
15
Verduyn tarps has you covered. Our 30' by 30' tarp is made out of 18 oz Vinyl and has stainless steel d-rings. This tarp has 4 Rows of D-Rings along all 4 Sides and a grommet row along all 4 sides.
Shipping is available across Canada
Check out our other KIJIJI ADS and our website at www.verduyntarps.com.
Call us at 1-905-578-3677.
VERDUYN TARPS - YOUR TRUCKER TOY STORE.
Hamilton, Ontario
-
16
Looking for some equipment cheap or free will pick up.
I have some land and am in need for some equipment I’m willing to fix up whatever.
Lawn tractors
tractors
skid steers
backhoes
Chainsaws
Tillers
Attachments
Trailers
Bobcat John Deere caterpillar
-
17
22012 International Grain Silage Truck AUTOMATIC LOW KM $47,900
2012 International 7400 Tandem Axle Grain Silage Truck Automatic!
This truck is deleted and ready to go to work!
Year: 2012
Make: International
Model: 7400 Tandem Axle Grain Silage Truck
Mileage: 91, 857 KM
Engine Hours: 8417 Hrs
Engine: Maxx Force 9 (Deleted)
Horsepower: 315 HP
Torque: 950 lbs. torque
Transmission: Automatic
Number of Axles: Tandem Axle
Front Tire Size: 315/ 80R22.5 (In Very Good Shape)
Rear Tire Size: 11R 22.5 (In Very Good Shape)
Cab Type: Day Cab Dual Steering
Province of CVIP: AlbertaFeatures:
- Differential Lock
- Heat/Air Conditioning
- Cruise
- Right and Left Hand SteeringRig Up:
- Courtney Berg Combination Grain Silage Box
Box Length: 19’
Box Width: 102”
Box Height: 54”
Rear Door Height: 54”
Rear Door Width: 32”
Grain Chute Height: 12”
Grain Chute Width: 19”- Hydraulic Rear Gate
This unit was just checked over by our mechanic and all required repairs have been completed! Paperwork to show for it.
This truck is in very good condition and ready to go to work.
Located: Lacombe, AB
Financing Available OAC!
Asking: $47,900 + GST
Please Call or Text: (403) 357-2725
-
18
2014 Cat 299D Rubber Track Skid Steer. 2600 hours on it . Runs great no leaks . Comes with a GP bucket . Forks not included. Asking $73,000 OBO. For more info please contact Champ's Equipment 780 880 5858
-
19
2017 Ford F-650 STR, 6.7L Diesel, Auto, 2WD, Only 5517 km, A/C, Tilt, Cruise, P. Windows, P. Locks, 27,500 lbs GVW, 11R22.5 Rubber, Air Seat, Exhaust Brake, 106 inch Cab to Axle, c/w; 14 Ft Knapheide Deck w/ 28 inch Metal Removable Sides, Like New Condition, Comes with Fresh CVIP Inspection, $88,900, stk #05766, Financing Available OAC, CARFAX Report Included, AMVIC-Licensed Business, Shipping Available, Trucks For Less Ltd @ 10484 267 St, Acheson, AB, “Work Trucks is What We Do”, www.TrucksForLess.ca (ABAR 31.1(2)(a)(b) Vehicle History Declarations: None) (Advertised photo(s) / video(s) are of actual unit) . Vehicle Information Provided by autoTRADER.ca
-
20
Chisholm Trail BALE BED and DUMP BED ALL IN ONE $19,769
There is no other unit on the market like it!
Authorized Distributor for C5 Manufacturing.
The Ultimate Bale Bed – A Bale Bed and Dump Bed ALL IN ONE!
The Chisholm Trail Bale Bed is a specialty after-market steel bed manufactured to fit pickup trucks, aiding farmers and ranchers in the feeding process of livestock and the transport of large rounds of hay. The same hydraulic components operate both the arm function and the unique dump bed function, adding considerably to the versatility of the unit.
The Chisholm Trail Bale Bed is considered by many to be the ultimate bale bed because of its feature-rich design, ruggedly built components, ease of operation and competitive pricing.STANDARD FEATURES:
Unique Dump
The Chisholm Trail Bale Bed’s unique dump feature expands your capabilities to handle hay and dump materials from the comfort of your cab. There is no other unit on the market like it. Arm lift capacity is 2,850 pounds and bed dump capacity is 6,000 pounds.Independent Arm Action
The Chisholm Trail Bale Bed uses two squeeze cylinders rather than a phasing cylinder for better squeeze and maneuverability. You can move the arms separately or in tandem for easier bale retrieval when stacked end-to-end. This also helps loading into a ring feeder, even if you do not have a straight shot. Lift any size or shape effortlessly— round, square, wide or narrow. You can haul up to four 4’ rounds side-by-side with a dual wheel pickup. You can also squeeze a large 4’ by 8’ square bale end-to-end or from the side. The arm range on dual wheel trucks of 3’6″ to 9’6″ enables you to grab small or misshapen items as well.Free-Float Arm System
The free-float arm system allows you to unroll hay while maintaining full contact with the ground over rough terrain. This function helps to prevent skips and thick blankets of hay, allowing even distribution of feed and reducing waste.Locking Valve System
Our unique locking valve stops arms from creeping out when carrying hay bales. Additionally, unlike other units on the market, our design significantly limits truck frame stress.No-Need-to-Jack Trailers
The Chisholm Trail Bale Bed makes work easier and quicker in so many ways, especially hooking up your gooseneck trailer. Just raise the bed until the jack stand is off the ground, store the jack, lower the bed, and off you go. No more cranking!Additional Features
• Electric-over-hydraulic heavy duty 4 gpm power unit
• LED work lights that work on a switch in the cab
• Tethered hand control
• Additional set of stop/turn lights in the headache rack
• Heavy duty 2 x 4 x 3/16″ rounded bent tube headache rack with louvers for stylish good looks and the ultimate in safety
• 2-5/16″, 30,000 pound rated hitch ball with 1″ rise, recessed in the bed with door closure
• H-frame stabilizer system
• 1/8” Tread plate floor with component access doors – no door hinges! Access door for all working components under the bed including fluid fill door.
• Mud flaps
• LED running lights throughout the bed and a pair of resistors to accommodate the low voltage lights (no flashing of lights due to computer error)
• Four 3 x 20 lift cylinders
• Two 2 x 6 squeeze cylinders
• 350 Amp fuse and fuse block system
• Grab handles on each side of the headache rack
• D-ring tie down rings on each side of the bed
• Two-part urethane paint for more durability and shineSAFETY FEATURES
• Easy access to mechanical parts through large access doors
• Safety stand 2’ x 1- ½ x 1- ½ x 11 gauge steel
• Highly visible warning and caution decals
• 350 Amp fuse and block attached to truck frame
• Heavy duty bent tube headache rack
• Heavy duty 2 5/16th 30,0000 pound rated hitch ball 1″ rise
• 23’ Tethered hand held control pendant
• Ruggedly built all steel construction
• Grab handles on either side of the headache rack
• D-ring tie downsSIZES
The Chisholm Trail Bale Bed is available in six different sizes:SINGLE REAR WHEEL TRUCKS PRICING $$$
37N Bale Bed With Dump - $19,769 + GST Including Installation
7’ wide x 7’4” long
The 37N bed fits single wheel trucks with a very short bed. It has a 37.5” cab to axle measurement.42N Bale Bed With Dump - $19,769 + GST Including Installation
7′ wide x 7’8″ long
The 42N bed fits single wheel trucks with a short six-foot bed. It has a 42″ cab to axle measurement.56N Bale Bed With Dump - $19,910.75 + GST Including Installation
7′ wide x 8’10” long
The 56N bed fits single wheel trucks with a standard eight-foot bed. It has a 56″ cab to axle measurement.60N Bale Bed With Dump - $20,045.75 + GST Including Installation
7′ wide x 9’10” long
The 60N bed fits a true cab and chassis ton truck with single wheels and a 60″ cab to axle measurement.DUAL REAR WHEEL TRUCKS PRICING $$$
37w Bale Bed With Dump - $19,910.75 + GST Including Installation
8’ wide x 7’4” long
The 37w bed fits dual wheel trucks with a very short bed. It has a 37.5” cab to axle measurement.42w Bale Bed With Dump - $19,910.75 + GST Including Installation
8′ wide x 7’8″ long
The 42W bed fits dual wheel trucks with a short six-foot bed. It has a 42″ cab to axle measurement.56W Bale Bed With Dump - $20,010.75 + GST Including Installation
8′ wide x 8’10” long
The 56W bed fits a dually bed truck. It has dual wheels and a 56″ cab to axle measurement. This is often called a bed delete truck. It has a bent (dog leg) frame as opposed to a straight cab and chassis frame.60W Bale Bed With Dump - $20,495 + GST Including Installation
7’8″ wide x 9’10” long
The 60W bed fits a true cab and chassis ton truck with dual wheels and it has a 60″ cab to axle measurement. This truck comes from the factory without a bed. It has a straight frame.84W Bale Bed With Dump - $21,450 + GST Including Installation
8′ wide x 11’10” long
The 84W bed fits dual wheel trucks with 84″ cab to axle measurement.OPTIONAL FEATURES AND ACCESSORIES
• Removable side boards
• Spinners for unrolling hay
• Under body tool boxes
• PTO provisional power unit
• Engine driven power unitWARRANTY
C5 Manufacturing has an excellent reputation for quality and workmanship. If you feel a component has not lasted to your expectation, please contact us. These concerns will be handled on a case-by-case basis.
C5 Manufacturing warrants, to the original purchaser, products manufactured by C5 Manufacturing to be free of defects in material and craftsmanship for a period of two years from the date of purchase. There will be NO warranty if the bed is installed by an unauthorized dealer.
Optional items have specific warranties:
• Motor and pump are warranted for a period of one year
• Spinners and headache rack work lights are warranted for 60 days
• The Dew Eze and CW Mills’s pumps are warranted for 120 days
C5 Manufacturing also warrants the purchased parts to be free from defects for the period as set by the parts said manufacturer. If any part, as determined by C5 Manufacturing, is found to be defective, the labor and the part to be replaced or repaired will be borne by C5 Manufacturing.
All shipping and handling are the consumer’s responsibility. For replacement parts, please contact your dealer or the C5 Manufacturing plant in Kingman, Kansas. Warranty for replacement or repair shall not extend the original warranty period. C5 Manufacturing does not warrant against normal wear or damages caused by abuse, negligence, poor maintenance or operation beyond the rated capacities. The warranty card must be completed and returned to C5 Manufacturing within 30 days of purchase.LOCATED: Red Deer, AB
INSTALLED AT LACOMBE, ABFINANCING AVAILABLE OAC!
Please reply to this ad for more information.
-
21
Chisholm Trail Bale Bed
Authorized Distributor for C5 Manufacturing.
The Chisholm Trail Bale Bed is a specialty after-market steel bed manufactured to fit pickup trucks, aiding farmers and ranchers in the feeding process of livestock and the transport of large rounds of hay.
The Chisholm Trail Bale Bed is considered by many to be the ultimate bale bed because of its feature-rich design, ruggedly built components, ease of operation and competitive pricing.STANDARD FEATURES:
• Electric-over-hydraulic heavy duty 4 gpm power unit
• Spinners for unrolling round bales
• LED work lights in the headache rack
• Tethered hand control
• Additional set of stop/turn lights in the headache rack
• Heavy duty 2” x 4” x 3/16” rounded bent tube headache rack with louvers for stylish good looks and the ultimate in safety
• 2-5/16”, 30,000-pound rated hitch ball with 1” rise, recessed in the bed with door closure
• H-frame stabilizer system
• 1/8” Tread plate floor with component access doors. Access door for all working components under the bed including fluid fill door.
• Mud flaps
• LED lighting
• 3x20 lift cylinders, two for bale arms
• Two 2x6 squeeze cylinders
• 350 Amp fuse and fuse block system
• Grab handles on each side of the headache rack
• Two-part urethane paint and primer for more durability and shine
• Bolt on receiver hitchSAFETY FEATURES:
• Easy access to mechanical parts through large access doors
• Safety stand 2’ x 1-1/2 x 1-1/2 x 11-gauge steel
• Highly visible warning and caution decals
• 350 Amp fuse and block attached to truck frame
• Heavy duty bent tube headache rack
• Heavy duty 2-5/16th 30,000-pound rated hitch ball 1” rise
• 28’ Tethered hand held control pendant
• Well-built all steel construction
• Grab handles on either side of the headache rack
• D-ring tie downsOPTIONAL FEATURES:
• Underbody Tool Boxes
• Remote Hydraulic Connections
• Power Beyond Connections
• Wireless Remote
• Power Beyond
• Remote CouplersArm Lift Capacity
The Chisholm Trail Bale Bed’s arm lift capacity is 2,850 pounds.Independent Arm Action
The Chisholm Trail Bale Bed uses two squeeze cylinders rather than a phasing cylinder for better squeeze and maneuverability. You can move the arms separately or in tandem for easier bale retrieval when stacked end-to-end. This also helps loading into a ring feeder, even if you do not have a straight shot. Lift any size or shape effortlessly— round, square, wide or narrow. You can haul up to four 4’ rounds side-by-side with a dual wheel pickup. You can also squeeze a large 4’ by 8’ square bale end-to-end or from the side. The arm range on dual wheel trucks of 3’6″ to 9’6″ enables you to grab small or misshapen items as well.Free-Float Arm System
The free-float arm system allows you to unroll hay while maintaining full contact with the ground over rough terrain. This function helps to prevent skips and thick blankets of hay, allowing even distribution of feed and reducing waste.Locking Valve System
Our unique locking valve stops arms from creeping out when carrying hay bales. Additionally, unlike other units on the market, our design significantly limits truck frame stress.
SIZES
The Chisholm Trail Bale Bed is available in six different sizes:SINGLE REAR WHEEL TRUCKS PRICING $$$
37N Dump Flatbed - $16,852 + GST Including Installation
7’ wide x 7’4” long
The 37N bed fits single wheel trucks with a very short bed. It has a 37.5” cab to axle measurement.42N Bale Bed - $16,852 + GST Including Installation
7′ wide x 7’8″ long
The 42N bed fits single wheel trucks with a short six-foot bed. It has a 42″ cab to axle measurement.56N Bale Bed - $16,987 + GST Including Installation
7′ wide x 8’10” long
The 56N bed fits single wheel trucks with a standard eight-foot bed. It has a 56″ cab to axle measurement.60N Bale Bed - $17,135.50 + GST Including Installation
7′ wide x 9’10” long
The 60N bed fits a true cab and chassis ton truck with single wheels and a 60″ cab to axle measurement.DUAL REAR WHEEL TRUCKS PRICING $$$
37w Dump Flatbed - $16,987 + GST Including Installation
8’ wide x 7’4” long
The 37w bed fits dual wheel trucks with a very short bed. It has a 37.5” cab to axle measurement.42w Bale Bed - $16,987 + GST Including Installation
8′ wide x 7’8″ long
The 42W bed fits dual wheel trucks with a short six-foot bed. It has a 42″ cab to axle measurement.56W Bale Bed - $16,987 + GST Including Installation
8′ wide x 8’10” long
The 56W bed fits a dually bed truck. It has dual wheels and a 56″ cab to axle measurement. This is often called a bed delete truck. It has a bent (dog leg) frame as opposed to a straight cab and chassis frame.60W Bale Bed - $17,135.50 + GST Including Installation
7’8″ wide x 9’10” long
The 60W bed fits a true cab and chassis ton truck with dual wheels and it has a 60″ cab to axle measurement. This truck comes from the factory without a bed. It has a straight frame.84W Bale Bed - $18,094 + GST Including Installation
8′ wide x 11’10” long
The 84W bed fits dual wheel trucks with 84″ cab to axle measurement.WARRANTY
C5 Manufacturing has an excellent reputation for quality and workmanship. If you feel a component has not lasted to your expectation, please contact us. These concerns will be handled on a case-by-case basis.
C5 Manufacturing warrants, to the original purchaser, products manufactured by C5 Manufacturing to be free of defects in material and craftsmanship for a period of two years from the date of purchase. There will be NO warranty if the bed is installed by an unauthorized dealer.Optional items have specific warranties:
• Motor and pump are warranted for a period of one year
• Spinners and headache rack work lights are warranted for 60 days
• The Dew Eze and CW Mills’s pumps are warranted for 120 days
C5 Manufacturing also warrants the purchased parts to be free from defects for the period as set by the parts said manufacturer. If any part, as determined by C5 Manufacturing, is found to be defective, the labor and the part to be replaced or repaired will be borne by C5 Manufacturing.
All shipping and handling are the consumer’s responsibility. For replacement parts, please contact your dealer or the C5 Manufacturing plant in Kingman, Kansas. Warranty for replacement or repair shall not extend the original warranty period. C5 Manufacturing does not warrant against normal wear or damages caused by abuse, negligence, poor maintenance or operation beyond the rated capacities. The warranty card must be completed and returned to C5 Manufacturing within 30 days of purchase.LOCATED: Red Deer, AB
INSTALLED AT LACOMBE, ABFINANCING AVAILABLE OAC!
Please reply to this ad, call or text: 403-357-2725
-
22
For different sizes of bushings and excavator bucket pins, please visit:
https://fdparts.ca/collections/bucket-pinProduct code: Pin (Outer diameter) x ( Length)
Pin-ID 30mm, Lengths 210-260mm, (Price $35)
Pin-ID 35mm, Lengths 240-260mm, (Price $35)
Pin-ID 40mm, Lengths 260-350mm, (Price max $45)
Pin-ID 45mm, Lengths 170-400mm, (Price $45)
Pin-ID 50mm, Lengths 230-450mm, (Price max $50)
Pin-ID 55mm, Lengths 260-380mm, (Price max $55)
Pin-ID 60mm, Lengths 180-450mm, (Price max $65)
Pin-ID 65mm, Lengths 180-530mm, (Price max $75)
Pin-ID 70mm, Lengths 230-480mm, (Price max $85)
Pin-ID 80mm, Lengths 320-570mm, (Price from$85-$120)Bushing
Bushing-(Internal diameter) x (Outer diameter) x ( Length)
Bushing-25x35x30, (Price $15)
Bushing-ID 30mm, Different Outer diameter and Length, (Price $20)
Bushing-ID 35mm, Different OD and Length, (Price $18)
Bushing-ID 40mm, Different OD and Length, (Price max $20)
Bushing-ID 45mm, Different OD and Length, (Price max $24)
Bushing-ID 50mm, Different OD and Length, (Price $25)
Bushing-ID 55mm, Different OD and Length, (Price max $27)
Bushing-ID 60mm, Different OD and Length, (Price max $33)
Bushing-ID 65mm, Different OD and Length, (Price max $35)
Bushing-ID 70mm, Different OD and Length, (Price $35)
Bushing-ID 80mm, Different OD and Length, (Price max $40)
Bushing-ID 85mm, Different OD and Length, (Price $40)
Bushing-ID 90mm, Different OD and Length, (Price max $50)
Bushing-ID 100mm, Different OD and Length, (Price max $60)FD Parts & Supplies specialize in supplying excavator parts, components, and other materials. We focus on new aftermarket parts for most makes and models of excavators. We have very reliable supply network to provide good quality parts and components with very competitive price, including buckets pin, bushing. Also has the ability to help customer to get manual / quick attaches, undercarriage As, hydraulic cylinders, etc .
-
23
32 Ft Cougar 5th Wheel with Polar Package. 4 Slide Outs, Awning, Stereo with outside speakers, TV, Fireplace, Sleeps 4. Master Bedroom has Queen size bed factory mattress has been changed to a Serta Perfect Sleeper. Has domestic water pressure valve as well as food safe water hose. All dishes, bedding and towels included.
Excellent condition
-
24
2018 Mercedes C63 AMG Coupe Low Mileage at only 24,804 KM!
Renntech Stage 1 Package! 600 HP+
Entirely Loaded: Alcantara - Navigation - Backup Cam - Panoramic Roof
$619 /bw
6.99% for 72 Months
-
25
1775 extreme duty jet boat
200 sport jet with 98hrs. Fully serviced with mercury oils. Only mercury synthetic 2stroke oil used.
List of add on from dealer listed in pic.
**financing is available, private message for details**Extras:
Upgraded low pressure fuel pump
Swivel kicker motor bracket.
Sloped camper top.
Rock guard/net on trailer.
Located in Fort mcmurray, AB.
-
26
2016 Seadoo GTX 300 Limited, 3 Seater- Supercharged. Pristine Condition. 20 Hours. C/W Triton LX Trailer. 2 Keys, ( Learner and Full Power ) Cover. Stored in Heated Garage all times. Original owner.
-
27
Brand new sectional barges for sale.
$35,000 limited time special pricing.
Transportable by Truck.
Canadian built
Transport Canada approved.
Stamped engineered drawings.
10’x40’x5’ sections in stock
Pinning System to join barges for the configuration you need.
Bargebuilders.ca
-
28
-21 Ft Eagle sport,
-20 Degree Delta
-Teleflex Controls
-Tilt Helm
-Hydraulic Place Diverter
-Legend J-0129 Pump,
-Lawrence Mark-5X pro fish finder
- Engine, 5.7L Kodiak EFI, 330HP (535Hrs) Spark plugs, cap and rotor changed in July/19.
-Spare stock nozzle
-Karavan trailer (2012)
-Travel cover, half top & slopper top
-Hull is in great condition with no dents .This boat is very efficient to run .
27,000$ OBO.
Serious inquiries only .
Boat located in Fort McMurray,AB
Please contact Justin by text or call
780-742-4432
-
29
We have hundreds of stern drive and outboard lower units from 2 HP to 300HP. All makes and all models. Please call 250-851-0084 with the model and serial number of your unit or email with pictures. We also have a huge inventory of new and used parts, including lots of older, obsolete, hard to find parts for all your boating needs.
-
30
New and used hydraulic power trim units such as 14034A3, 14035A3, 18-2421 or 18-2420. We have many others too! We also have new electric motors for your old power trim unit. Plus we have a huge inventory of new and used parts, including lots of older, obsolete, hard to find parts for all your boating needs. 250-851-0084.
-
31
1999 Malibu 2150 Sport Cuddy. Mercury 5.7L fuel injected engine with closed cooling system, Bravo 3 twin prop leg with spray bar cooling, 260 prop HP. This boat is loaded up with galley package, electric fridge, propane stove with built in removable tank, fresh water tank and sink. Beam- 8’8”, Cuddy Cabin length 6’10” with deck hatch, Dual Batteries with battery selector/isolation switch. Full gage package with power and tilt steering, 330 hours on the hour meter, Cockpit cover, Full standup camper enclosure, full storage cover, Monster wake board tower with custom bimini top, wake board rack and ski rack, integrated swim grid ladder, transom shower, removable kicker motor bracket. Fibreglass inner liner with snap in carpet kit, floor storage, 52 gallon fuel tank, anchor locker, auto bilge pump, dual windshield wipers, Pioneer stereo system, pop up cleats, port-a-potti, built in bow lights, 2 sets of SS props (26 and 28 Pitch),dual fire extinguishers, service manual for Mercury power train, Bravo 3 prop socket. EZ Loader galvanized tandem bunk trailer with hydraulic surge brake system. Original owner, original sales brochures available.
-
32
FROZEN MINNOWS $ 6.00
BEST MINNOWS FOR LOCAL FISHING.
$ 6.00 NO GST.
https://www.facebook.com/WTP-Fishing-Supplies-and-more-Fort-Mcmurray-Fishing-STORE-183870071663715
-
33
Journeyman mechanic willing to repair/service whatever it is you need , auto or heavy duty only , prefer heavy duty TEXT OR CALL 7807991763 do not email
-
34
Interior cleaning, Shampoo upon request, Exterior cleaning wax upon request. Call message for free quote prices vary for different vehicles.... Very meticulous at what Ido ,won't be disappointed .
-
35
Call us with your truck and trailer needs.
We have financing available. We offer the most competitive terms such as 0 down and low monthly payments. We can approve new and existing owner operators and most credit types.
Get in touch on 780-665-4862
-
36
Protect your cargo with our Verduyn 4 piece step deck tarp set. . All our d-rings are stainless steel and the grommets are made out of brass. All the boarders are reinforced with 2” webbing.
All 4 of these heavy duty tarps are manufactured with 18 oz black vinyl material.Ask about our volume discounts.
Check out our other KIJIJI ADS and our on-line store..
We ship across Canada1-905-578- 3677
www.verduyntarps.com
YOUR TRUCKER TOY STORE.
HAMILTON, ONTARIO
SHIPPING IS AVAILABLE ACROSS CANADA
-
37
YOUR COMPLETE ATTACHMENT SPECIALISTS: BIGFOOT Enterprises - Spruce Grove, Ab.
Get Ready For Winter Now, Don't Wait Until It's Too Late
Angle Brooms Available In 68", 84" & 96" Widths in Hydraulic or Manual Angling
Full Steel Shroud With Storage Stands and Flex Mount For Down Pressure Assistance
Large 32" Poly/Steel or Straight Poly Bristles Will Last Longer & Your Reduce Down Time
Depending On Your Machine, We can outfit this with Your 8-Pin or 14-Pin Control HarnessCall or Email us today So We can Equip You With The Best Model & Size For Your Application
CALL DANNY: 780-695-0116 or RANDY: 780-288-3668
Universal SkidSteer Mount Fits All The Current Skid Steers:
Bobcat, Case, CAT, John Deere, New Holland, Gehl, Mustang, Volvo, JCB, KubotaBIGFOOT Enterprises - YOUR COMPLETE ATTACHMENT SPECIALISTS
Located Near Spruce Grove, Ab.
http://www.bigfootenterprises.caAll Our NEW Attachments Are Built By Quality Canadian And U.S. Manufacturers And Covered By Full Manufacturer's Warranty
BIGFOOT Enterprises Has Been Specializing In Attachments, Nothing Else, For Skid Steer, Wheel Loader & Excavator Equipment Since 2006. With Over 20 Cdn & US Manufacturers, We Cover All Your Attachment Needs.
Call or Email Us Today.
-
38
Krogmann Bale Bed
Krogmann Bale Handler- For The Serious Cattlemen
The Krogmann BaleHandler – Hydraulic balebed / flatbed for pickup trucks built to handle big round hay bales by Krogmann Manufacturing, Sabetha, Kansas.
The Leader in Balebed Engineering with Patented Arm & Spinner Design
Krogmann's BaleHandler is excellent balebed/flatbed equipment for standard and dually trucks available in 7' or 8' widths. With its lifting capacity of 2500 pounds, this machinery is for the serious cattlemen, sportsmen and livestock agricultural producers. Krogmann Balebeds are for both new and or older pickups. The package includes standard features which make Krogmann the preferred choice. Optional components such as custom building for shorter or longer pickup beds and third spool valves offer flexibility to fit unique needs around the farm and ranch. Engine driven or all electric models are available.
Krogmann engineering doesn't stop with the hydraulic Balebed they manufacture. Another of our products, the Carry-All, handles 4-wheelers, small equipment and materials on the farm and ranch and is used to hydraulically lift, haul and dump. We also manufacture across-the-bed, underbody side toolboxes.
WARRANTY: 3 Year Warranty. The Longest Warranty in the Industry!
Manufacturing the Best Quality Bale Beds. Flatbeds, Toolboxes and Hitches Since 1989.
Engine Driven or All Electric Models Available.
SPECIFICATIONS:
• Single Wheel Bed Width: 7’
• Single Wheel Bed Length: 9’
• Dually Bed Width: 8’
• Dually Bed Length 9’
• Lifting Capacity: 2500 lb.
• Fully Synchronized Squeeze Cylinders
• Warranty 3 YearsSTANDARD FEATURES:
• Recessed 30,000 lb. Gooseneck Ball
• Rear Drop Hitch
• Double Headache Rack
• Extendable Spinners (Manually Extend Up To 15”)
• Mudflaps
• Steel Sides
• Sealed Beam LED Taillights
• Pump
• Electric Valves
• RV Trailer Plug
• Back-up Lights
• Toggle Switch Controls
• Pioneer Quick Couplers
• Electric Controls
• Water Tight, Sealed Seam Cross Members• 1/8" deck plate with heavy 3" channel iron cross members on a 5" channel iron main frame offers a tough, long lasting bed for many years to come.
• Arms fold down on top of the bed to make self-forming sides.
• Cylinders are enclosed in the rear tube for safety and durability, with end cap access.
• Clean design has less area to catch hay and bind.
• 30,000 lb. recessed gooseneck ball under trap door.
• Spinners, set above the bed, do not have to be removed when setting down the arms. They will not hit the bed and will manually extend up to 16" for ease in putting bales in feeders.
• Rear access door hinges forward so cylinder doesn't damage it. Flush mounted stainless steel hinges make a smooth surface.
• Custom-built shorter or longer beds. Optional third spool valve for constant on.
• Across-the-bed toolbox 70"L x 10"H x 20"W – complete with stainless steel hinges, tray and gas shock.
• Side toolboxes 30"L x 17"H x 12"W – standard size of 12 ga. steel with stainless steel hinges and latch. Complete with dual chains which offer enough support so the door can be used as a step.
• New 8' wide bed or flared standard bed for dually pickups.
• Carry-All attachment lets you lift, haul and dump.
• The Krogmann Balebed looks great on new pickups or older models!
• Haul two big bales with ease from the comfort of your pickup.OPTIONS:
• Across the Bed Toolbox (Stainless Steel Hinges) 20”W x 70”L x 10”H $737.44
• Side toolboxes 30”L x 17”H x 12”D- standard size of 12 ga. steel with stainless steel hinges and latch. Complete with dual chains which offer enough support that the door can be used as a step. $442.46 for Drivers Side and $442.46 for Passenger Side
• Add on 3 spool valve kit (for Engine Driven Models) $737.44
• Add on Headache Rack Lights Kit $489.04
• Work Lights $138.17
PRICING FOR SINGLE WHEEL TRUCK ELECTRIC PUMP:
Single Wheel Short 7 ½’ Balebed With Electric Pump (7’W x 7 ½’L)
Price Including Shipping and Installation: $16,487.50 + GSTSingle Wheel Standard Balebed With Electric Pump (7’W x 9’L)
Price Including Shipping and Installation: $16,487.50 + GSTPRICING FOR SINGLE WHEEL ENGINE DRIVEN PUMP:
Single Wheel Short 7 ½’ Balebed With Engine Driven Pump (7’W x 7 ½’L)
Price Including Shipping and Installation: $19,343.75 + GSTSingle Wheel Standard Balebed With Engine Driven Pump (7’W x 9’L)
Price Including Shipping and Installation: $19,343.75 + GSTPRICING FOR DUAL WHEEL TRUCK ELECTRIC PUMP:
Dually Wheel Balebed Short 7 ½’ Balebed With Electric Pump (8’W x 7 ½’L)
Price Including Shipping and Installation: $17,297.50 + GSTDually Wheel Balebed Standard With Electric Pump (8’W x 9’L)
Price Including Shipping and Installation: $17,297.50 + GSTPRICING FOR DUAL WHEEL TRUCK ENGINE DRIVEN PUMP:
Dually Wheel Balebed Short 7 ½’ Balebed With Engine Driven Pump (8’W x 7 ½’L)
Price Including Shipping and Installation: $20,153.75 + GSTDually Wheel Balebed Standard With Engine Driven Pump (8’W x 9’L)
Price Including Shipping and Installation: $20,153.75 + GSTX-Long Balebed $465.75 Per Added Foot
LOCATED: Lacombe, AB
INSTALLED: Lacombe, ABFinancing Available OAC!!!
Please reply to this ad for more information.
-
39
3 cyl kubota Diesel engine. Machine only has 560h. 3 speed with 3 ranges and 2 aux drives to power hydraulic pump or whatever attachment you want. Has its own hydraulic pump with 1 dump / Plow cylinder. Roughly 41/2x8’ around 1000lbs as it sits and will hold over 2000lbs . Very well built and little use great machine for Plow , dump box ,hauling logs etc .looking for $7000 possible trades for skid steer , tractor , dump trailer, car hauler , duramax , canam . 7806074575
-
40
2004 Clark CMP75 Forklift
Year: 2004
Make: Clark
Model: CMP 75
Lift Capacity: 15,000 lbs.
Engine Hours: 2964 Hrs
Tires: Air Pneumatic (Dual Fronts With Tire Chains)
Fuel: LPG
Mast: 157”
Forks: 72”Features:
- Side Shift
- Front Lights
- Back Up Alarm
- Beacon LightLocated: Rocky Mountain House, AB
PRICE: $27,000 + GST FOB Rocky Mountain House, AB
Financing Available OAC!
Please Call: 403-877-1477
-
41
YOUR COMPLETE ATTACHMENT SPECIALISTS: BIGFOOT Enterprises - Spruce Grove, Ab.
Canadian Made Heavy Duty Rock Bucket / Stone Forks Available For Skid Steers or Tractors.
Universal Skid Steer Mount & Hundreds of Tractor Mounts
Widths From 48" to 92"
1 1/4" Round Bar Shafts - 2 1/2" Spacing Between Tines
Tips Are 5/8" Thick Made From 400 Brinell Steel
23" High & 40" DeepCALL DANNY: 780-695-0116 or RANDY: 780-288-3668
Universal SkidSteer Mount Fits All The Current Skid Steers:
Bobcat, Case, CAT, John Deere, New Holland, Gehl, Mustang, Volvo, JCB, KubotaBIGFOOT Enterprises - YOUR COMPLETE ATTACHMENT SPECIALISTS
Spruce Grove, Ab.
http://www.bigfootenterprises.caAll Our NEW Attachments Are Built By Quality Canadian And U.S. Manufacturers And Covered By Full Manufacturer's Warranty
BIGFOOT Enterprises Has Been Specializing In Attachments, Nothing Else, For Skid Steer, Wheel Loader & Excavator Equipment Since 2006. With Over 20 Cdn & US Manufacturers, We Cover All Your Attachment Needs.
Call or Email Us Today.
-
42
Selling a Brand New 2019 Kenworth T270 with 11ft Summit Crane Body:
-11ft steel body construction
-Summit 10620 (10,000lb 20ft reach) hydraulic crane
-2 fully hydraulic outriggers
-drawer packs throughout
-sliding top cover over rear cargo area
-VMAC Predatair 40 compressor*call or text Karlee at 403 872 0429 if interested*
-
43
-Tax included price,
-Brand new item
-Self pick up or free delivery within Edmonton, can be delivered to Fort Mcmurray, Athabasca and grassland.
-This price is for 1 piece, if you need more, please specify.
-We have a lots different size bushings for bucket pin. pls see our full listings for that.
-Very good quality and competitive price.Product code: Pin (Outer diameter) x ( Length)
Pin30mm, Lengths 210-260mm, (Price from$40-$42)
Pin35mm, Lengths 240-350mm, (Price from$42-$55)
Pin40mm, Lengths 160-400mm, (Price from$60-$73)
Pin45mm, Lengths 170-400mm, (Price from$63-$88)
Pin50mm, Lengths 230-450mm, (Price from$65-$100)
Pin55mm, Lengths 240-380mm, (Price from$70-$92)
Pin60mm, Lengths 180-520mm, (Price from$70-$92)
Pin65mm, Lengths 180-530mm, (Price from$85-$120)
Pin70mm, Lengths 230-480mm, (Price from$70-$150)
Pin80mm, Lengths 320-600mm, (Price from$140-$170)
Pin90mm, Lengths 520-650mm, (Price from$190-$230BBP-(Internal diamter) x (Outer diameter) x ( Length)
BBP25x35x30, (Price $18)
BBP30mm, Different Outer diameter and Length, (Price from$20-$22)
BBP35mm, Different OD and Length, (Price from$23-$25)
BBP40mm, Different OD and Length, (Price from$25-$27)
BBP45mm, Different OD and Length, (Price from$27-$28)
BBP50mm, Different OD and Length, (Price from$30-$32)
BBP55mm, Different OD and Length, (Price $32)
BBP60mm, Different OD and Length, (Price from$34-$38)
BBP65mm, Different OD and Length, (Price from$38-$40)
BBP70mm, Different OD and Length, (Price from$42-$45)
BBP80mm, Different OD and Length, (Price from$45-$48)
BBP85mm, Different OD and Length, (Price from$48-$52)
BBP90mm, Different OD and Length, (Price from$50-$60)
BBP100mm, Different OD and Length, (Price from$72-$83)
FD Parts & Supplies was established in 2020, and will specialize in supplying excavator parts, components, and other materials to Alberta market. We focus on new aftermarket parts for most makes and models of excavators. We have very reliable supply network to provide good quality parts and components with very competitive price. Our products start from buckets pin, bushing. Also has the ability to help customer to get quick attaches, roller, idler, track, track adjuster, sprocket, track motor, H-link, cylinders, etc at affordable price
-
44
NEW 2021 Kramer Ranch Hand 6 Bale Processor
Manufacturing Excellence Since 1937
Kramer Manufacturing Inc. was founded in 1937 by innovator in the agricultural world, Leo Kramer. After four generations, Kramer’s is still based on integrity, quality, loyalty and innovation.
Designed to Haul and Process Six Big Round Bales !!!
Kramer Manufacturing offers two models of the Ranch Hand Bale Processor. The Ranch Hand Bale Processor is offered in a four bale and a six bale model to meet your needs. Ranch Hand Bale Processors are ideal for all feeding needs, whether you are range feeding, laying windrows, bedding or bunk feeding our bale processors perfect for you.
The processor is designed to leave uniform processed windrows reducing contamination and trampling to your feed. Our processors remove dirt, mildew and mold during the grinding stage leaving you with a cleaner, better quality of feed ultimately keeping your livestock healthy.
The Ranch Hand Bale Processor makes lesser quality of feed more palatable for your livestock. We mount the latest Haybuster 2660 and 2665 mounted on a heavy rectangular tube frame. The tilting bed allows for easy loading, and can carry four or six bales. Bales are conveyed straight into the grinder without dropping them in saving wear on your processor. Kramer Manufacturing uses a heavy frame and trussed torque to ensure our customers are getting the most durable processor on the market.Features
• Haybuster 2660/2665 Cutting Unit
• Right side Discharge
• Heavy Duty Flails
• High Speed Rotor
• Easily Adjustable Slug Bars
• Oil Bath Chain Case
• Dual Oscillating Tandem Axles. Kramer’s tandem dual oscillating axle system with heavy duty spindles and hubs give an extra measure of dependability and performance in the field which sets Kramer’s apart from it’s competitors. The 8 radial tires provide safety during maximum loads.
• Rotor Access Door gives you quick and easy access to the rotor for routine inspections and twine removal. The rotor is 78 inches long with 30 heavy duty flails for fast shredding.
• Three 3x8” Live Beams with 2080H Chain makes loading new and old hay easy.
• Inline P.T.O. Driveline
• Easy LoadingOther Features
• Right Side Discharge provides the operator with better visibility to the output of feed. Tractor hydraulic controls are located on the right side; the right hand discharge makes it easy to look over your right shoulder and keep your hand on the tractor controls reducing operator fatigue.
• Rotor Access Door provides quick and easy access to the rotor for routine inspections and twine removal.
• Heavy Duty Flails and High Speed Rotor process both dry hay and silage bales.
• Deflector is a one handed operation. The latch requires only one hand because the torsion springs support the bulk of the deflector’s weight, allowing you to set the deflector to the desired position with very little effort. The optional hydraulic deflector allows the operator to set the deflector position directly from the tractor cab.
• Easily Adjustable Slug Bars
• Haybuster Rugged Oil Bath Chain Case to reverse the direction of the P.T.O., increasing the speed and efficiency of the rotor by 30% to improve processing in all conditions.
• Inline P.T.O. Driveline provides vibration free turns. The hinged P.T.O. shield allows for easy maintenance. The inline P.T.O. is available Standard P.T.O. configuration.
• Adjustable Slug Bars are easily adjustable from a single point. The Slug bar adjustment alters the amount of the rotor exposed to the hay, and is adjustable based on the type of hay, moisture content of the hay and the coarseness/fineness of the cut desired.
• Dual Oscillating Tandem Axles allow for smooth travel and even loads over the roughest terrain.
• Haybuster Patented Shredder Chamber with Adjustable Slug Bars and 3 Chain Slat Conveyor combined with heavy duty flails and high speed rotor, the shredder chamber will process bales in any condition; wet, frozen, old, new or flattened bottoms. The conveyor is slanted so it helps feed the hay/straw into the rotor.OPTIONAL FEATURES
• Containment kit to add even more size to the shredder chamber. Great option for corn stalk bales.
• Extra stripper channel kits for starter final product.
• Feed tank top dresser feed supplements on top of the window while you are processing a bale.
• Hydraulic deflector allows you to adjust the deflector height without leaving the tractor.
• Wide deflector belt 18’’ and is great option for bunk feeding.SPECIFICATIONS
Capacity- Six Large Round Bales
Width- 8 Feet 6 Inches
Length- 39 Feet
Bed Length- 26 Feet
Tractor- 100 Plus Horsepower
Weight- Approximately 8,900 lbs.
Tires- Eight Firestone Destination AD2 Radial Tires
Knives- 30 Heavy Duty, Heat Treated
Chain- C20B2H Bed Chain
Hydraulics- 3 Hydraulic RemotesTHE SECRET IS STILL THE SHREDDER CHAMBER
The 2660 and 2665 Shredder Chamber:
• Is one of the easiest to operate. Just load a bale into the shredding chamber and go! Rarely do you have to reverse bale rotation to process a flat bottom or loose bale.
• Processes hay into palatable rations, making your hay go further to reduce your costs.
• Has tall sides to reduce spillage, ensuring your hay gets processes completely.
• Offset rotor never allows the bale to be directly on top of the rotor, making slug bar adjustments possible with a bale in the chamber.
• The 3-chain slatted conveyor provides needed traction to process round bales, hard or soft core, no matter what their condition.
Adjustable slug bars allow you to easily position the bales from the rotor and hammers allowing you to take any size bite out of the bale.Grain Tank Application
Grain tanks are designed for gravity flow to the auger with an adjustable tent inside to change the flow of grain to auger and to keep the weight of the grain off the auger. This helps prevent the grain from packing inside. There is a steel lid that can be opened from the ground using an attached door lever.Other highlights include an adjustable flow control to the hydraulic motor to change the speed of the auger to get the desired pounds of grain out. The hydraulic drive motor is attached with a 50 roller chain and one bearing on the auger. There are 2 plexiglass windows in the slope of the tank that allow for a reference point to see how much grain is inside of the tank. There is a door located on the back of the tank that allows for easy access to the auger for cleaning purposes. Grain Tanks will feed corn, wheat, soybeans, dry distiller pellets and granular, milo, and range cubes. Grain tanks also come with an auger extension chute for bunk feeding.
Liquid Feed Application
Mounting a liquid tank directly on the processor gives you the ability to feed forage and add supplements at the same time. Saving the producer time and money.Liquid improves palatability, reduces dust and fines, all while improves uniformity of the mix, and reduces ration sorting. All cows get equal access to feed because the aggressive eaters are limited in consumption and don’t continually stand at the feeder.
WHY DO YOU NEED A BALE PROCESSOR?
• Saves Time- Fewer trips back to the stackyard.
• Saves Labour- One-man operation, never leaving the tractor.
• Saves Money- Makes hay, alfalfa, cane go further.
• Shreds hay into a window or spreads mulch quickly and thoroughly.
• Makes lesser quality hay more palatable and healthier.
• Shreds and spreads bales up to 40-foot width for animal bedding and mulch.PRICING:
6 Bale Processor - $49,900 + GSTLOCATED: Lacombe, AB
Financing Available OAC!!!
Please reply to this ad for more information.
-
45
Speedwerx Stainless Lightweight Muffler Like New great shape low miles. Will fit Arctic Cat 1100T series/ M1100T/ ProCross 1100T series sleds from 2012 and up. $275
-
46
S13 front subframe with relocated rack and offset aluminum rack bushings.
Was just powder coated last year still looks new just a little dirty atm. (Black with red flake)
Can deliver as far as Calgary.
S13 s14 240sx 180sx
-
47
Canopy for 2007-2014 crew cab short box 5’8” GMC Sierra painted black high rise locking rear glass with 2 keys and led 3rd break light, cannot locate clamps so will need to be bolted to box or new clamps
-
48
I have 4 P235/701R16 Michelin Mud & Snow tires with about 80% tread left for sale.
Price is $350.00
Phone Don @ 780-799-3655
-
49
New Mountain Addiction Gas cans and Packs contact for price
-
50
21”x3.5” front 80 spoke wheel black with chrome spokes $1200 cdn
Wheel tire mounted and dual rotors
Tax and shipping included
www.valleyspeed.net