Cars & vehicles, Heavy equipment, Other with in Canada, Nova Scotia, Halifax.
-
1
NEW 1-800-361-4095 **** 2021 ******* GP-10 MONDIAL AUTOMOTIVE EQUIPMENT, GP-10 is an asymmetric lift with 10000 lbs capacity. - Double cylinder,Steel pulleys and equalizing cable system. - - motor / pump 3 hp - 220 volts.
Combo (Symmetrical and Asymmetrical) Arm Assembly
Straight Front/Rear 3 Stage reach from 22 7/8" to 42 5/8"
Straight Rear 2 Stage reach from 33 5/8" to 52 7/8"
Screw-in pads 4 pieces included
Truck adapters 4 pieces included
Double point safety lock release
Automatic arm lock restraints
Relief valve built in power pump to prevent overloading
Door guards protection rubber
Up-limit switch to protect cylinders working stroke used in safe length scope
Heavy duty 3/8" diameter cable and 5" pulley that reduce high stress on synchronization process and increase cable life
Ultra high molecular self lubricating nylon slider that ensures carriage smooth moving up and down
Lifting operation by pressing "UP" button on motor
Manual lowering operation by pressing lever
Relief valve built in power pump to prevent overloading
Overall Height: 144"
Overall Width: 134 5/16"
Maximum Lift height with Truck Adapters: 81"
Maximum Lift height without Truck Adapters: 75"
Minimum Height of Arm Top: 4"
Carriage to Carriage Width (Drive through clearance): 100"
Column to Column Width: 109"
Column Cross Section: 11"L x 7"W
Driving Mode: Dual hydraulic cylinders, chain drive
Motor: 220V Single Phase 3HP 10A (recommend a 30A breaker)
Hydraulic Oil: 3-5 gallons AW32/AW46
Lifting Capacity: 10,000 LB
Time to full rise: 50 sec
Concrete Requirement: 5" thick at 3500 psi reinforced with fiberglass or steel (4" thick for vehicles 9000LB and below)
Anchor bolts/mounting hardware included
Tool trays and toe guards included- Warranty is 1 year on parts and 5 years on the structure.
-Transport service and delivery available across Canada
See my other ads !!!!!!
For more information contact us Tel:1-800-361-4095Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
2
I have several used skidder winches,some parts and controls for sale Gearmatic-8 ,9 ,119,Cancar 20,Hercules,Cargo,if interested CALLS ONLY 1-506 433-0343;THANKYOU.
-
3
Shop Manual for a Model 80 Galion Crane 1981 Asking $10.00 No Shipping Local pickup only
phone 902 860 1224
-
4
2 USED TRACKS SIZE 300X52.5X86 VERY LITTLE USE ON TRACKS AT 90 PERCENT IN STOCK WE ALSO SELL NEW TRACKS (( STEVE DALE AUTO & EQUIPMENT LTD )) CALLS ONLY 506 461 3657
This Size Fits Case CX35, Case CX33C, Case CX37C, Ditch Witch MX35, Ditch Witch MX352, Doosan DX35Z, JD/Hitachi EX35U, JD/Hitachi ZAXIS35U2, JD/Hitachi ZAXIS35U2, JD/Hitachi ZX35U-2, JD/Hitachi 35D sn < 265713, JD/Hitachi 35G, JD/Hitachi 35ZTS, JD/Hitachi 35C, JD/Hitachi ZX35ZTS, JD/Hitachi 35D sn > 265712, Hyundai Robex35Z-9, Hyundai R35Z-7, Komatsu PC30MR, Komatsu PC30MR, Komatsu PC30MR-2, Komatsu PC30MRX, Komatsu PC35MR-2, Komatsu PC35MR-3, Komatsu PC30UU-3, Komatsu PC35MR-5, Nagano NS35-2A, Schaeff HR3.7, Terex TC37, Sany SY35C, IHI IS 30NX-2, Hitachi EX 35U, John Deere 30G, New Holland E37
-
5
TEL: 1-800-361-4095 ******* Tire changer • It allows to dismantle and mount tires on steel and alloy wheels up to 21"in diameter • Plastic protectors are provided to for the alloy wheels.
- One year warranty on parts. We have all spare parts in stock. -Transport service and delivery available across Canada
-4 post parking lifts available Other garage equipment available.
-Transport service and delivery available across Canada
See my other ads !!!!!!
For more information contact us Tel:1-800-361-4095Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
6
MK Martin SB68 Snowblower
New 2023 model assembled in Winter 2023. Has minor fade and small rust here and there. Never been used. New-old stock.
68" Cutting Width
14" Auger Diameter
21" Fan Diameter
25" Body Height
Cat 1 Hitch
Adjustable Skid Shoes
Manual Chute Rotation (Optional Hyd)
Manual Chute Deflector (Optional Hyd)
PTO with Shear Bolt
2 Left In StockRegular 2024 Price - $4275 Plus Tax
One Only (Of Each Color) - $3950 Plus Tax
Will cut PTO shaft for free to customer's desired length.
For more info, please email, text or call:
Central Equipment
Kentville, NS
902-678-0866 Ext 3
902-790-3941 Cell
-
7
NEW 1-800-361-4095 **** 2021 ******* GP-9 MONDIAL AUTOMOTIVE EQUIPMENT, GP-9 is an assymetric lift with 9000 lbs capacity. - Double cylinder,Steel pulleys and equalizing cable system. - - motor / pump 3 hp - 220 volts.
Combo (Symmetrical and Asymmetrical) Arm Assembly
Straight Front/Rear 3 Stage reach from 22 7/8" to 42 5/8"
Straight Rear 2 Stage reach from 33 5/8" to 52 7/8"
Screw-in pads 4 pieces included
Truck adapters 4 pieces included
Double point safety lock release
Automatic arm lock restraints
Relief valve built in power pump to prevent overloading
Door guards protection rubber
Up-limit switch to protect cylinders working stroke used in safe length scope
Heavy duty 3/8" diameter cable and 5" pulley that reduce high stress on synchronization process and increase cable life
Ultra high molecular self lubricating nylon slider that ensures carriage smooth moving up and down
Lifting operation by pressing "UP" button on motor
Manual lowering operation by pressing lever
Relief valve built in power pump to prevent overloading
Overall Height: 143 3/16"
Overall Width: 134 5/16"
Maximum Lift height with Truck Adapters: 81"
Maximum Lift height without Truck Adapters: 75"
Minimum Height of Arm Top: 4"
Carriage to Carriage Width (Drive through clearance): 100"
Column to Column Width: 109"
Column Cross Section: 11"L x 7"W
Driving Mode: Dual hydraulic cylinders, chain drive
Motor: 220V Single Phase 3HP 10A (recommend a 30A breaker)
Hydraulic Oil: 3-5 gallons AW32/AW46
Lifting Capacity: 9,000 LB
Time to full rise: 50 sec
Concrete Requirement: 6" thick at 3500 psi reinforced with fiberglass or steel (4" thick for vehicles 9000LB and below)
Anchor bolts/mounting hardware included
Tool trays and toe guards included- Warranty is 1 year on parts and 5 years on the structure.
-Transport service and delivery available across Canada
See my other ads !!!!!!
For more information contact us Tel:1-800-361-4095Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
8
1R 22.5 truck Tires all around 20 percent left on tread price $ 100 call there going fast 506 461 3657
-
9
kiene diesel indictor
-
10
"Unlock the Potential: Elite Excavation Services Tailored for Builders and Investors
Elevate Your Projects with:
Precision Landscaping
Foundation Excavation Excellence
Driveway Prowess
Seamless Land Clearing
We Speak Your Language. We Deliver Your Vision."]
-
11
Selling 2 shocks together bought for Motorhome did not work could not return to company
-
12
I am looking for a mini excavator also open to a larger one as well can pay cash 902-237-9911 thanks
-
13
Freightliner Columbia 2007
13 speed manual
Detroit 60 series engine
Contact 9024032655
-
14
1R 22.5 truck Tires all around 20 percent left on tread price $ 100 call there going fast 506 461 3657
-
15
2 new shocks for a frightliner. Never been mounted part # 16-18708-000 they will fit frightliner cascadea 2008-2021 and frightliner M2 2002-2022. $190 OBO.
-
16
Very good condition John Deere 4045DF150 with rockford 4-11256 (twin disk) clutch power unit.
ONLY 2500hrsShipping available
-
17
Attachments for all makes and models of Excavators
MADE IN CANADA
2 Year WarrantyAttachments Available:
Ditch Cleaning Buckets
HD Tooth Buckets
Twist/Tilt Buckets
Extreme Duty Rock Buckets
Root Rakes
Skeleton Buckets
Hydraulic Thumbs
4 in 1 Buckets
Trapezoidal Buckets
Mechanical Concrete Pulverizers
Chuck Blades
Couplers (Pin Grab, Wedge, Hydraulic or Mechanical)
Screening Buckets
Grapples - Log, Demo, Clam-Shell, Orange Peel
Frost RippersGRITT Equipment Sales
-
18
2016 Cat 320EL with Hydraulic Thumb forestry cage for front window , also plumbed for a mulcher Hours 7760 undercarriage around 70 percent Air condition cab back up camera call Steve anytime 506 461 3657 SD EQUIPMENT LTD EXCAVATOR IS IN FREDERICTON NB ((FINANCE AVAILABLE DELIVERY AVAILABLE ))
-
19
New hydraulic pump
Requires an engine
-
20
THESE ARE TWO OKADA 2020 BUT NOW CONSIDERED 2023 HAMMERS BOTH TOTALLY REBUILT WITH STAGE 2 REBUILD KITS WHICH INCLUDED ALL NEW BUSHINGS - NEW SEAL KIT - NEW PISTONS AND TWO NEW MOIL POINTS RESEALED AT OKADA FACTORY REPAIR SHOP - BOTH WERE LITTLE USED - RESEALING DUE TO SITTING DUE TO COVID - BUT DECIDED TO MAKE THEM BOTH AS NEW c/w 6 MONTHS FULL WARRANTY FROM OKADA NORTH AMERICA STARTING THE DAY YOU RECEIVE THE HAMMER.
2020 Okada ORV7500 Hydraulic Demo Hammer Breaker Chisel Attachment Tool
LOW HOUR 2020 MODEL 7500 FT LB HAMMER USED 1 JOB BEFORE COVID - CURRENTLY FINISHED A COMPLETE REBUILT TO NEW AT OKADA'S OREGAN FACTORY REBUILD FACILITY
HAVING A COMPLETE RESEAL AND NEW NITROGEN CHARGE ALONG WITH NEW FACTORY PISTON AND ALL NEW BUSHINGS AND SEAL KIT COMES WITH 1 NEW OKDA MOIL POINT AND 1 AS NEW OKADA MOIL POINT SO 2 NEW POINTS
WILL BE SHIPPED DIRECTLY FROM OUR LANGLEY BC YARD THERE TO BUYERS YARD - WILL SHIP ON OUR ACCOUNT WE GET FAST SERVICE AND GREAT RATES
TAKE OKADA ORV7500 — MID CLASS HYDRAULIC BREAKER READY TO WORK FOR $60,000.00 CDN
SEE IMAGE 4 FOR A USED ONE FOR SALE THAT IS 2 SERIAL NUMBERS OFF OF OUR FACTORY REBUILT - RESEALED UNIT
AND TAKE THE OKADA TOP150 — 3000 FT-LBS CLASS HYDRAULIC BREAKER FOR $30,000.00
FRANK 604-476-7777
OKADA ORV7500 — MID CLASS HYDRAULIC BREAKER
ORV Series hydraulic breakers for use with skid steer loaders, mini and small excavators and tractor loader backhoes.
AUTO-LUBE
A central grease port with internal grease passage allows you to easily adapt the hammer to most auto lube systems.
MAIN VALVE
The internal control valve system equates to faster speeds and higher impact energy while still allowing the breaker to operate at cooler temperatures.
ACCUMULATOR
The large capacity accumulator reduces shock load in the system.
STROKE ADJUSTER
Variable speed control in the breaker maximizes productivity.
ORIGINAL HOLDING SYSTEM
The powercell is securely held inside the bracket with the head damper, reducing recoil.
LARGER N2 GAS CHAMBER
Ensures high impact power.
LONG STROKE PISTON
Increases impact power and reduces vibration and recoil.
DUAL CHISEL RETAINING PIN
Heavy-duty chisel set pins in many Okada models offer extended service life.
DURABLE BREAKER BRACKET
Includes a heavy-duty bottom plate that protects the powercell and reduces noise and vibration.
Technical Data
IMPACT ENERGY CLASS 7500 ft-lb / 10170 JOULES
OPERATING WEIGHT 5950 lbs / 2698 kg
OIL FLOW 63-72 gpm / 238-272 lpm
FREQUENCY 230-400 bpm L-mode / 270-470 S-mode
OPERATING PRESSURE 2320-2600 psi / 157-180 bar
MECHANICAL ENERGY 98-133 HP / 73.4-99.5 KW
MECHANICAL ENERGY AVG 115.5 HP / 86 KW
UNIT WORKING LENGTH 124 in / 315 cm
TOOL DIAMETER 6.1 in / 155 mm
TOOL WORKING LENGTH 30.2 IN / 767 MM
85DB(A) LEVEL DISTANCE 119-167 ft / 36-51 M
CARRIER WEIGHT RANGE 60-92 lbs. / 27-42 M tonOKADA TOP150 — 3000 FT-LBS CLASS HYDRAULIC BREAKER
Okada’s medium class breakers are available in a wide range of designs, from those specifically engineered to provide maximum impact energy for the toughest rock applications to others suited for a combination of concrete and rock breaking with the potential for faster blow speeds.
Precision machining processes and strict Okada quality control are used to produce all main breaker components. There is no need for complete assembly replacements and the use of high precision parts mean economical, labor-saving rebuilds of your Okada breaker.
Breaker brackets are made of heavy gauge high tensile steel plates and are designed to give maximum protection to the breaker body and dissipate heat while making it easier to access the equipment during daily maintenance inspection.
Okada bushing designs, a special heat treatment process and individually lubricated bushings enhance the service life of wear parts.
Technical Data:
IMPACT ENERGY CLASS 3000 ft-lb / 4068 JOULES
OPERATING WEIGHT 3000 lbs / 1361 kg
OIL FLOW 30-35 gpm / 114-132 lpm
FREQUENCY 600-750 bpm L-mode
OPERATING PRESSURE 2030-2620 psi / 140-180 bar
MECHANICAL ENERGY 42-63 hp / 31-47 kw
MECHANICAL ENERGY AVG 52.5 hp / 39 kw
UNIT WORKING LENGTH 94 in / 239 cm
TOOL DIAMETER 4.8 in / 122 mm
TOOL WORKING LENGTH 24 in / 610 mm
CARRIER WEIGHT RANGE 28-42 lbs. / 13-19 M tonWE ALSO HAVE A $80k NEW OLD STOCK OKADA DEMOLTION PROCESSOR THAT FOR 200-350 CLASS MACHINES - SEE MY OTHER ADS FOR $35,000.00
-
21
FITS 250-500 CLASS EXCAVATORS - $92k REPLACMENT COST
BRAND NEW EXTREME DUTY EXCAVATOR MOUNTED LOGGING 20K CAPACITY GRAPPLE C/W WITH NEW CUSTOM EXTREME DUTY $7500.00 BOLT ON TOP PLATE SYSTEM - THIS IS NOT A WELD ON SYSTEM BUT CUSTOM ONE WAY THREADED BOLT ON SO YOU CAN CHANGE EAR SETS QUICKLY WITH ONLY A MILWAUKEE ELECTRIC IMPACT REQUIRED ON ONE WAY EASY ACCESS BOLTS
TAKE THIS 85,000.00 PLUS COST OF TOP PLATE SYSTEM GRAPPLE FOR $45K JUST LOWERED THE PRICES TO MOVE THIS EQUIPMENT QUICKLY - FRANK 604-476-7777 OR TOLL FREE Phone : 1-(833) 693-9323 ONLY SELLING AS LEAVING BC TO MOVE TO OUR NEW HOME IN NB AFTER 53 YEARS IN DEMOLITION - TRUCKING
MODEL T40HPX-114 2 CUBIC YARD 360 DEGREE ROTATION GRAPPLE 19000 LB CAPACITY - BRAND NEW DEMOLITION OR LOGGING GRAPPLE WITH HPX DRIVE NO HYDRAULIC CYLINDER GRAPPLE
CURRENTLY AT DC WELDING WHO IS INSTALLLED A BRAND NEW BOLT ON TOP PLATE WITH 90MM PINS WITH 12.80 INCHES BETWEEN THE EARS TO PUT ON A PC360LC-10 WITH GEITH PIN GRABBER COUPLER - THAT EXCAVATOR IS NOW SOLD.
WE WERE ALSO GOING TO MOUNT ON OUR LONG REACH PC450LC-8 KOMATUD WITH PIN GRABBER MOUNT BY BUILDING ANOTHER 100 MM BOLT ON TOP PLATE
HAS CONSTANT HI-PRESSURE GRABBING FORCES AND DOES NOT RELEASE PRESSURE UNTIL DONE BY THE OPERATOR
THIS USES A HELIX STYLE DRIVE AND INTERNAL ROTATOR - IT HAS A QUICK CHANGE GRAPPLE SYSTEM TO CHANGE TO MULTIPLE CHOICES FOR DIFFERENT GRAPPLE ARMS FROM LOGGING - DEMOLITION - ETC
BASE GRAPPLE NEW IS OVER $85,000.00 PLUS OVERSEAS SHIPPING - CUSTOMS AND 16 WEEKS OF LEAD TIME
PERFECT FOR UNDERWATER WORK, LOGGING OR DEMOLITION AS NEVER EXPOSE HYDRAULIC CYLINDERS WHEN WORKING
TAKE THIS NEW GRAPPLE TODAY FOR $45,000.00 WITH THE NEW BOLT ON TOP PLATE IN PLACE
ONLY SELLING AS WE ARE RETIRING AND SELLING ALL MY EXCAVATORS AND ATTACHMENTS
JUST LOWERED THE PRICES TO MOVE THIS EQUIPMENT QUICKLY AS RETIRING BACK TO OUR NEW HOME IN NB DUE TO HEALTH ISSUES FROM THE FOREST FIRE SMOKE PARTICULATES AND EXTREME TRAFFIC AND ITS SMOG IN THE FRASER VALLEY AND CLEARING OUT MY YARD TOTALLY
WILL SHIP QUICKLY WE GET GREAT RATES AND SERVICE AND CAN HAVE A TRUCK UNDER IT NEXT BUSINESS DAY
FRANK 604-476-7777
THIS GRAPPLE WILL PIN ON THE FOLLOWING MACHINES DIRECTLY OR ANY PIN GRABBER THAT TAKES 90 MM PINS WITH 12.80 INCHES ACROSS THE BOTTOM MOUNT
Case CX240
Case CX240
Case CX290
Case CX290Komatsu PC240
Komatsu PC240
Komatsu PC250-6
Komatsu PC270
Komatsu PC270LC-6
Komatsu PC270LC-7
Komatsu PC280
Komatsu PC280
Komatsu PC290Link-Belt 240LX
Link-Belt 290LX
Link-Belt 3400 QUANTUM
Link-Belt 3900 QUANTUMALL PARTS AND QUICK CHANGE GRAPPLE SHELLS (ARMS) ARE AVAILABLE FROM:
KINSHOFER Canada
5040 Mainway Drive, Unit #11
Burlington, ON, L7L 7G5
Tel.: +1 (905) 335 2856
Fax: +1 (905) 335 4529
Toll Free (North America): 1 (800) 268 9525
Email: sales-northamerica@kinshofer.comKINSHOFER GmbH is a leading manufacturer of attachments for truck cranes and excavators for the most important industries worldwide.
From our headquarters in Holzkirchen, Bavaria, we offer our customers an extensive range of attachments for equipment carriers with or without hydraulics for scrap, demolition, track construction, landscaping, general construction, snow clearing, excavation, road construction, forestry, recycling, etc.
The continuing demand for transportation and infrastructure is constantly driving our product development and the service we offer. As a result, we are continuously expanding our product range in order to develop and produce technical highlights in the industries.
The cylinderless and low-maintenance technologies that are used for the HPXdrive on grapples or the NOX tiltrotators and TC tilt couplers are examples of these innovations, as are the products for special requirements or unusual uses from our special solutions department.
With high quality, variety and the latest technology, KINSHOFER crane and excavator attachments set standards worldwide.
Technologies - HPXdrive Excavator
Functional exchange, depending on demands!
During times of growing costs and environmental awareness, efficient working is getting more and more important.
The HPXdrive stands out thanks to its extended lifetime compared to a conventional cylinder-driven grab.Compared to conventional cylinder grabs, the closing force of the HPXdrive is high and constant during the entire operation.
The movement of the arms is generated by two hollow shafts, which run opposd and have a helix thread, hydraulically driven by a single piston.
The resulting closing force is always the same no matter the position of the shellsThanks to the shell exchange system you are able to clearly lower the investment costs for your fleet.
Just change fast and easy to the suitable shell option depending on the task.
The reliable shell exchange system features an easy loosening of the shells in case of exchange and a safe and steady holding of loads during every task.
Setup times can be reduced to a minimum.
The flexibility of your work processes as well as your competitive abilities can be increased.
-
22
HINO 185
Good cab, motor and transmission
Hiab crane
Runs good
Requires brakes (rusty and sticky)
Idea for farm, automatic and crane would be very useful
Crane can be sold separate
-
23
For sale a new Rockwell automatic slack adjuster part # R80 1073 asking $100.00 phone 902 860 1224
-
24
Tire machine 1-800-361-4095 ** ** Tire machine MONDIAL TC-325 HelpvSwing arm Tire changer with Bead Blaster It allows to remove and install regular low profile/runflat tires up to 24 "in diameter thanks to the pneumatic Help arm. Plastic inserts are provided to protect the alloy wheels.
TC-325 Specifications
Rim clamping outside 10"-22"
Rim clamping inside 12"-24"
Motor: 2HP, 15 AMPS, 120V/60Hz
Maximum Tire Diameter 41"
Wheel width:3’’-15"
Operating pressure 115-145 psi
- One year warranty on parts. We have all spare parts in stock.
-Transport service and delivery available across Canada, can be picked up at the local terminal delivery fees applies.Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
25
-PISTON RING SET, HASTINGS #2C7859 (STD), CONTINENTAL TRACTORS N-Y-F SERIES. $50.00/set.
-ROD BEARING SET, TRW #CB726P/3764CP, FOR BUDA 4CD C645-6DC844, 6MO SERIES. $40.00/set.
-(4 only) ENGINE VALVES, MCQUAY NORRIS #V1139, 4-CYL CASE, CO-OP, WAUKESHAW FC-FK-6Z-KA, 1935-41. $20.00/4.
-(2 only) VALVE GUIDES, MCQUAY NORRIS #G497, FOR ALLIS CHALMERS 1956-59, D17-WD45D, BUDA. $5.00/2.
Check part numbers for all applications.
PICK UP IN HAMMONDS PLAINS. Shipping available by Canada Post at cost.
-
26
2020 Kioti CK 2610hst TLB, 427hrs, 4x4 with diff lock and loaded Ag tires, front loader with 66" bucket, backhoe with 12" digging bucket, 36" clean up bucket, manual thumb and big foot stabilizer pads, 3rd function plumbed to front for grapple, 25hp diesel with no emissions. Very capable machine and run all day on a tank of fuel. Easily out works the other orange brand. Upgraded to skid steer and excavator. Delivery possible. $32 500 OBO. NO TRADES
-
27
2015 Freightliner Cascadia
DD15
10 speed
1 million KM
Excellent Condition
Please Contact Donny Gallant for more information: 902 452-2191
-
28
I am looking for a mini excavator also open to a larger one as well can pay cash 902-237-9911 thanks
-
29
Selling my cat track skid steer comes with brand new set of extra tracks. Works perfect
-
30
8 ft fisher snow plow,came off 1994 chev,comes with everything to install pump, controls,levers brackets.
-
31
Qty 2 - 18.4-34 23 degrees
These tires are in very good condition
Located in Moncton
-
32
Used once on my foodplots. Selling tractor so no longer need it. Pic is off the EA website, second pic is the unit for sale which is currently located on my other property. Black not yellow. Very well built in North America, not imported junk. Asking 4k firm. No exchange rate, duty, or taxes to deal with. Will deliver. No trades.
https://www.everythingattachments.com/Fully-adjustable-Deluxe-Box-Frame-Disc-Harrow-p/eta-xd-bf-dh.htm
-
33
John Deere 160 with 8000 hours. Undercarriage completely redone has 300 hours on it.
-
34
Small tractor chains, size 12.4x16 studded. Brought in 2019, used one year still like new. These are Trygg chains, not the cheap offshore chains. Paid $800.
-
35
Swing motor and pinion gear came out of a 2003 Cat 312 excavator $500 (902-237-9911)
-
36
New buckets, rakes, stump rippers, frost rippers lifting lugs.
Skid steer, farm tractors we have you covered.
This is the time of year for bucket repairs or complete refurbishment.
Swap out ears to fit a different machine.
902 880 4033 feel free to call or text.
Send a message for a quote on any of your projects.
-
37
1954 Ferguson tea 20 tractor great condition new carb alternator starter. fluids changed $ 3000 9024999760
-
38
18 load bars $25.00 each, 50 e straps $10.00 each and 2 load bars 3 in. square $50.00 each ( Make an offer on all of them) Phone Calls Only 902-757-2285
-
39
Cat 950F great machine
-
40
Kubota 7060 third funtion front fenders 350hrs
-
41
2007 2305 Compact Tractor
Loade and backhoe
1386 hours
-
42
1990 Mack truck low mileage starts and runs frontwards backwards and stops
-
43
QUADRAJET250. new never used 600v
-
44
"Unlock the Potential: Elite Excavation Services Tailored for Builders and Investors
Elevate Your Projects with:
Precision Landscaping
Foundation Excavation Excellence
Driveway Prowess
Seamless Land Clearing
We Speak Your Language. We Deliver Your Vision."]
-
45
(3) Oshkoshes for sale
2 CAT engines
1 Cummins
1 very rusty but solid frame
Great Rat Rod Project
All 3 for $12000
-
46
Jd quick attach hitch
-
47
Kubota 7060 only 300 hrs has 12 speed Tran. Front fenders and third function
-
48
Looking to trade my truck for a farm tractor truck needs some work I've put alot into it but at this point I really need another tractor to improve my business so the truck has to go it needs an oil cooler in the engine both tie rods replaced 4wd shift motor and a box for safety what I've replaced so far is axle u joints rear driveshaft u joint still needs one on diff replace which I have straight exhaust but have the factory exhaust to go with the truck replaced the transmission last year new dash cluster done at the dealer replaced the rear springs and added extras upgraded the starter to a 6.7 starter new alternator and batteries can corners been replaced as well I like the truck and don't really want to part with it but I don't drive it as much anymore and I really need a tractor more then the truck
-
49
Farma’s second generation 4.6 loader is mounted on a 7-ton trailer and ready to work! Both loader and trailer are loaded with features.
4.6 G2 Features:
-Maximum reach: 15’
-42” grapple with continuous rotation
-360 degree boom rotation
-Joystick controls
-Weight: 1070 lbsT-7 Features:
-Frame steering
-Hydraulic flap-down support legs
-11.5/80 - 15.3 wheels
-Reinforced crane platformOptional boom winch or valve stand!
Payments as low as $388.00/month taxes in!
Units are in stock!
Like us on Facebook!
Call Hants Equipment ltd 902-798-8262 WWW.HANTSEQUIPMENT.COM or drop by we are just off the 101 HWY at exit 5. You can see us from the HWY.
-
50
I will not be answering any emails or any messages through kijiji. If you have any questions call 902-790-7252 for information and for pricing.
2014 international
In great condition