Cars & vehicles with in Canada, Nova Scotia, Halifax.
-
1
NEW 1-800-361-4095 **** 2021 ******* GP-10 MONDIAL AUTOMOTIVE EQUIPMENT, GP-10 is an asymmetric lift with 10000 lbs capacity. - Double cylinder,Steel pulleys and equalizing cable system. - - motor / pump 3 hp - 220 volts.
Combo (Symmetrical and Asymmetrical) Arm Assembly
Straight Front/Rear 3 Stage reach from 22 7/8" to 42 5/8"
Straight Rear 2 Stage reach from 33 5/8" to 52 7/8"
Screw-in pads 4 pieces included
Truck adapters 4 pieces included
Double point safety lock release
Automatic arm lock restraints
Relief valve built in power pump to prevent overloading
Door guards protection rubber
Up-limit switch to protect cylinders working stroke used in safe length scope
Heavy duty 3/8" diameter cable and 5" pulley that reduce high stress on synchronization process and increase cable life
Ultra high molecular self lubricating nylon slider that ensures carriage smooth moving up and down
Lifting operation by pressing "UP" button on motor
Manual lowering operation by pressing lever
Relief valve built in power pump to prevent overloading
Overall Height: 144"
Overall Width: 134 5/16"
Maximum Lift height with Truck Adapters: 81"
Maximum Lift height without Truck Adapters: 75"
Minimum Height of Arm Top: 4"
Carriage to Carriage Width (Drive through clearance): 100"
Column to Column Width: 109"
Column Cross Section: 11"L x 7"W
Driving Mode: Dual hydraulic cylinders, chain drive
Motor: 220V Single Phase 3HP 10A (recommend a 30A breaker)
Hydraulic Oil: 3-5 gallons AW32/AW46
Lifting Capacity: 10,000 LB
Time to full rise: 50 sec
Concrete Requirement: 5" thick at 3500 psi reinforced with fiberglass or steel (4" thick for vehicles 9000LB and below)
Anchor bolts/mounting hardware included
Tool trays and toe guards included- Warranty is 1 year on parts and 5 years on the structure.
-Transport service and delivery available across Canada
See my other ads !!!!!!
For more information contact us Tel:1-800-361-4095Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
2
I have several used skidder winches,some parts and controls for sale Gearmatic-8 ,9 ,119,Cancar 20,Hercules,Cargo,if interested CALLS ONLY 1-506 433-0343;THANKYOU.
-
3
Shop Manual for a Model 80 Galion Crane 1981 Asking $10.00 No Shipping Local pickup only
phone 902 860 1224
-
4
2 USED TRACKS SIZE 300X52.5X86 VERY LITTLE USE ON TRACKS AT 90 PERCENT IN STOCK WE ALSO SELL NEW TRACKS (( STEVE DALE AUTO & EQUIPMENT LTD )) CALLS ONLY 506 461 3657
This Size Fits Case CX35, Case CX33C, Case CX37C, Ditch Witch MX35, Ditch Witch MX352, Doosan DX35Z, JD/Hitachi EX35U, JD/Hitachi ZAXIS35U2, JD/Hitachi ZAXIS35U2, JD/Hitachi ZX35U-2, JD/Hitachi 35D sn < 265713, JD/Hitachi 35G, JD/Hitachi 35ZTS, JD/Hitachi 35C, JD/Hitachi ZX35ZTS, JD/Hitachi 35D sn > 265712, Hyundai Robex35Z-9, Hyundai R35Z-7, Komatsu PC30MR, Komatsu PC30MR, Komatsu PC30MR-2, Komatsu PC30MRX, Komatsu PC35MR-2, Komatsu PC35MR-3, Komatsu PC30UU-3, Komatsu PC35MR-5, Nagano NS35-2A, Schaeff HR3.7, Terex TC37, Sany SY35C, IHI IS 30NX-2, Hitachi EX 35U, John Deere 30G, New Holland E37
-
5
TEL: 1-800-361-4095 ******* Tire changer • It allows to dismantle and mount tires on steel and alloy wheels up to 21"in diameter • Plastic protectors are provided to for the alloy wheels.
- One year warranty on parts. We have all spare parts in stock. -Transport service and delivery available across Canada
-4 post parking lifts available Other garage equipment available.
-Transport service and delivery available across Canada
See my other ads !!!!!!
For more information contact us Tel:1-800-361-4095Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
6
MK Martin SB68 Snowblower
New 2023 model assembled in Winter 2023. Has minor fade and small rust here and there. Never been used. New-old stock.
68" Cutting Width
14" Auger Diameter
21" Fan Diameter
25" Body Height
Cat 1 Hitch
Adjustable Skid Shoes
Manual Chute Rotation (Optional Hyd)
Manual Chute Deflector (Optional Hyd)
PTO with Shear Bolt
2 Left In StockRegular 2024 Price - $4275 Plus Tax
One Only (Of Each Color) - $3950 Plus Tax
Will cut PTO shaft for free to customer's desired length.
For more info, please email, text or call:
Central Equipment
Kentville, NS
902-678-0866 Ext 3
902-790-3941 Cell
-
7
NEW 1-800-361-4095 **** 2021 ******* GP-9 MONDIAL AUTOMOTIVE EQUIPMENT, GP-9 is an assymetric lift with 9000 lbs capacity. - Double cylinder,Steel pulleys and equalizing cable system. - - motor / pump 3 hp - 220 volts.
Combo (Symmetrical and Asymmetrical) Arm Assembly
Straight Front/Rear 3 Stage reach from 22 7/8" to 42 5/8"
Straight Rear 2 Stage reach from 33 5/8" to 52 7/8"
Screw-in pads 4 pieces included
Truck adapters 4 pieces included
Double point safety lock release
Automatic arm lock restraints
Relief valve built in power pump to prevent overloading
Door guards protection rubber
Up-limit switch to protect cylinders working stroke used in safe length scope
Heavy duty 3/8" diameter cable and 5" pulley that reduce high stress on synchronization process and increase cable life
Ultra high molecular self lubricating nylon slider that ensures carriage smooth moving up and down
Lifting operation by pressing "UP" button on motor
Manual lowering operation by pressing lever
Relief valve built in power pump to prevent overloading
Overall Height: 143 3/16"
Overall Width: 134 5/16"
Maximum Lift height with Truck Adapters: 81"
Maximum Lift height without Truck Adapters: 75"
Minimum Height of Arm Top: 4"
Carriage to Carriage Width (Drive through clearance): 100"
Column to Column Width: 109"
Column Cross Section: 11"L x 7"W
Driving Mode: Dual hydraulic cylinders, chain drive
Motor: 220V Single Phase 3HP 10A (recommend a 30A breaker)
Hydraulic Oil: 3-5 gallons AW32/AW46
Lifting Capacity: 9,000 LB
Time to full rise: 50 sec
Concrete Requirement: 6" thick at 3500 psi reinforced with fiberglass or steel (4" thick for vehicles 9000LB and below)
Anchor bolts/mounting hardware included
Tool trays and toe guards included- Warranty is 1 year on parts and 5 years on the structure.
-Transport service and delivery available across Canada
See my other ads !!!!!!
For more information contact us Tel:1-800-361-4095Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
8
1R 22.5 truck Tires all around 20 percent left on tread price $ 100 call there going fast 506 461 3657
-
9
kiene diesel indictor
-
10
"Unlock the Potential: Elite Excavation Services Tailored for Builders and Investors
Elevate Your Projects with:
Precision Landscaping
Foundation Excavation Excellence
Driveway Prowess
Seamless Land Clearing
We Speak Your Language. We Deliver Your Vision."]
-
11
RSI 7/8” handlebars fit snowmobile, dirt bike, etc.
-
12
2019 Suzuki Z50.
Excellent shape.
-
13
2021 Segway Snarler AT6 SE $6200 TX in. 4500kms. New battery. Fuel Injected. Runs great, lots of power. Power steering, 4X4, Led lighting, 2” hitch receiver
-
14
Low windshield fits Arctic Cat Procross chassis. Colour a little UV faded, otherwise good condition.
-
15
016 ski doo renegade 1200x
9000 miles
Fresh oil change and service ready to ride
7000
-
16
2012 can am commander 800
2022 karavan utility trailer all sides fold down
Package deal
18000
-
17
Have a brand new set of RB 124 carb boots fit skidoo rev chassis with VFORCE 3 reeds
Call or text 19022400341
-
18
Absolutely nothing wrong with it had it for 6yrs fmf pipe lots of aftermarket parts. Selling cause expecting a baby..asking 2000 obo call Ben at (506) 800-9822 tx
-
19
Not sure if i want to get rid of it just seeing whats out there for trades bikes works good smokes a little on start up needs a little love but rideable as is has papers. Needs rear brakes electric start (pull works starts first pull every time) everything else works could use front end tightened up . 9022936843
-
20
DEMO SALE 2022 Excaliber UTV Golf Carts. Lifted Chassis, one Black, One Blue
-
21
$3000 obo , Selling Polaris sportsman with 3000 lb winch
Passenger seat , aggressive tires , heated bars and throttle .
4x4 works great Starts up first flash
New battery , oil change and transmission oil just done .
Comes with 1 oil filter , adult helmet , youth ( toddler helmet ) brand new .
Getting new bike next month and no need for 2
-
22
2021 can am maverick 900 turbo rr fully loaded roof with stereo power windshield can am snow plow winch with h synthetic rope rock sliders front and rear bumpers rear view camera side mirrors turn signal rad relocated 3 point harnesses upgraded wheels and control arms this cost 70,000 to build must see
-
23
Open for trade. Looking to trade my unfinished project. The truck was electric, plan was to put gas over hydraulic drive in it. The truck still needs a little work, lots of work has already been done. Try me for what you have to trade. I am not interested in tire kickers. If you are interested let me know and show me what you have.
-
24
Look no further than APD MOTORSPORTS for all your ATV/UTV maintenance requirements. We have ATV maintenance packages starting as low as $78.95. We can tailor your package to suit your needs, whether you just want an engine oil change or all round fluid change, full check over from bumper to bumper, Just let us know what you require and we can quote you a great price.
We also offer pre purchase inspections if you are thinking of buying an ATV, bike or any other powersports equipment. This will help you to not make that purchase that you might end up regretting.
NO JOB IS TOO SMALL OR TOO BIG, WE DO IT ALL.
Just give us a call with whatever requirements you have and we will do our best to help.HOURS OF OPERATION:
Monday – Friday 9.00am – 5.00pm
Saturday 9.00am - 12.00 NoonAPD MOTORSPORTS
TEL: 902-821-2327
12282 PEGGY’S COVE ROAD
GLEN HAVEN
B3Z2R6
-
25
Halifax Motorsports | HFX Motorsports
FXR X-CROSS PRO ICE BOOTS are in stock and on sale now! These are the boots you need to keep your feet warm and dry all winter long. Don't let the cold temps keep you from riding your favourite trails. These boots are perfect for ice fishing too! Drop in today and let us help you find the perfect fit.
PRICE ONLY $319.99 all taxes in when picked up in store.
- Rated to -45° C with 600g insulation
- HydrX membrane
- Slip-on convenience
- FXR high traction outsole
- Fixed liner with fur lining
- Toe kick - clean snow and ice with ease
- BTO Thermostatic Midsole Insert
- Diamond grid genuine rubber inserts
- Ultimate heel holder design
------------------------------------------------
hfxmotorsports.com | #freeshipping over $99*Halifax Motorsports | HFX Motorsports
818 Prospect Road,
Goodwood NS, B3T 1P3
sales@hfxmotorsports.comText us at: 902-442-4046
p. 902-442-4046 or 1-833-442-4046
-
26
06 Apex, bought new in 08. Has not been out of the garage in 3 years and only driven around the fields for 3 winters before that. Good track and just over 5000 miles. Pic of odometer is from Nov 2023. Needs a battery and I will put one in if someone wants to see it. WILilling to trade for a 4 wheeler of same value.
-
27
BIEK SHOW SPECIAL - SAVE $2000...WAS PRICED AT $38799 NOW $36799ONE OF THE WAYS TO MAKE YOUR ADVENTURES EPIC IS TO HEAD OFF-ROAD WITH YOUR FAMILY AND FRIENDS
2024 Polaris® Ranger XP 1000 NorthStar Edition Ultimate FEND OFF THE ELEMENTSBUILT TO WORK AND PLAY HARD
Rain or shine, there's no stopping you from getting the work done with the RANGER XP 1000 NorthStar Edition.
Features may include:
- COMFORT
Every detail of the refined interior puts the driver and passengers first for unmatched comfort and convenience.
- NORTHSTAR EDITION ULTIMATE FEATURES
Enjoy the ultimate off-road in-cab experience even more by upgrading to the NorthStar Edition Ultimate.
- RIDE COMMAND
Unlock integrated RIDE COMMAND technology in your vehicle's display with the most sophisticated off road GPS navigation system. Communicate, plan ahead and stay connected for a confident start and finish to every adventure.
- RIDE COMMAND+
Having your machine equipped with RIDE COMMAND+ takes all guesswork out of owning it. Check your vehicle’s health, location and maintenance schedule all from the palm of your hand. First three years included with purchase.
- Convenient Power Windows
Enjoy the convenience that comes with power windows on the front doors, featuring a sure-closing, tight sealing 360° gasket seal to the vehicle.
- Control Your Coverage
Close the Pro Shield Full Glass Tip-Out Windshield for protection from the elements or open to experience the breeze and get an open-cab feel.
- CAPABILITY
Whether you’re hauling gear, towing a trailer or transporting people, make quick work of any task with the power of the dual overhead cam (DOHC) engine on RANGER XP 1000 NorthStar Edition.
- Capability Meets Utility
The RANGER XP 1000 NorthStar Edition makes every task easier with thoughtful innovation and toughness.
- STRENGTH
Fend off rocks, stumps, and rough terrain with a vehicle designed to take them on.
Includes
- Factory-Installed Heating & Air Conditioning HVAC System
- Pro Shield Cab System with Manual Crank Window Doors
- 27in. Pro Armor X-Terrain Tires & 14in. Wheels
- Polaris HD 4,500 lb. Winch with Synthetic Rope and Autostop
- 82 HP ProStar Engine
- 13in. Ground Clearance
- 2,500 Lb. Towing Capacity & 1,000 Lb. Box Capacity
- 7in. Display Powered by RIDE COMMAND
- Pro Shield Cab System with Full Glass Tip Out Windshield & Power Windows
- 29in. Pro Armor X-Terrain Tires & 14in. Wheels
- 14in. Ground Clearance
- RIDE COMMAND+ Technology
- RIDE COMMAND+ Technology
- 14in. Ground Clearance
- 29in. Pro Armor X-Terrain Tires & 14in. Wheels
- Pro Shield Cab System with Full Glass Tip Out Windshield & Power Windows
- 7in. Display Powered by RIDE COMMAND
- 2,500 Lb. Towing Capacity & 1,000 Lb. Box Capacity
- 13in. Ground Clearance
- 82 HP ProStar Engine
- Polaris HD 4,500 lb. Winch with Synthetic Rope and Autostop
- 27in. Pro Armor X-Terrain Tires & 14in. Wheels
- Pro Shield Cab System with Manual Crank Window Doors
- Factory-Installed Heating & Air Conditioning HVAC System
- STRENGTH
- Capability Meets Utility
- CAPABILITY
- Control Your Coverage
- Convenient Power Windows
- RIDE COMMAND+
- RIDE COMMAND
- NORTHSTAR EDITION ULTIMATE FEATURES
- COMFORT
-
28
Reluctantly made this ad to see if there is someone out there that appreciates the age and rarity of this machine. I have cherished it since the day I found it for sale.
1992 Suzuki LT 250RN ( Last year for the 2-stroke quadracer!)
- Good shape for the age and intended use of this machine
- Was refreshed in the early 2000's with bearings, bushings, seals, chain and sprockets, engine rebuild, reeds, clutch plates and springs, etc. ( Have all receipts)
- Has New/old stock OEM rear fender decals
- No holes or tears in seat
- "Banshee bend" Renthal Handlebars
- Boysen Reeds
- New Stator and Pulse Pickup assy installed last year.
- New OEM coil installed last year
- Have period correct rear brake disk guard ( not installed)
- Parking brake block off installed
- All brakes work well, just replaced rear brake fluid.
- Cylinder has been ported
- Dome has been milled once at time of engine rebuild.
- Has aftermarket plastic skid plate
- New throttle and clutch cable
- Three tires have slow leaks due to the previous owner having installed studs in the tires for fun on the ice.
- Carb could use some tlc, starts and runs fine but will not idle for long after warmed up due to low speed adjustment screw.
- Since this machine was refreshed in the early 2000's, it really hasn't had much use. Stored indoors.
* Would very much like to trade for a well cared for, not abused 2005-2012 Honda 500 Rubicon with under 8k mileage.. either red or green, with papers, and not modified for mud, no snorkels, nor plowed with.
* At this time, I have not set an asking price. I'm giving this ad some time to attract the trade im looking for. *Txt for quickest response
Thanks for looking
-
29
1986 Honda Fourtrax
Just Message for more information
-
30
WAS $22,399 NOW RALLYE PRICED AT $21,899 SAVE $500 WHEN FINANCED HERE AT A BANK OF YOUR CHOICE!
2024 Kawasaki Teryx4Eager for action, the four-passenger Teryx4 side by side is built to tackle tough trails. With the perfect combination of rugged sport performance and capability, the Teryx4 is made to conquer the outdoors with the entire crew on board. Take adventure to the next level with extra features only found on the Teryx4 S models. For the ultimate package, explore more with the Teryx4 S Special Edition.
Features may include:DURABILITY
- REAL STRENGTH
From the reinforced steel frame to the protective front brush guards, Teryx4 side by sides are built strong inside and out.POWER
- POWERFUL & RESPONSIVE
The four-stroke, fuel-injected, 783cc engine of Teryx4 side by sides work in unison with a Continuously Variable Transmission (CVT) to produce smooth and consistent power over rugged terrain.PERFORMANCE
- BUILT FOR ADVENTURE
Teryx4 side by sides are ready to take on all challenges with strong power, agile handling, and a host of modern features for a capable, exhilarating ride.COMFORT & CONVENIENCE
- EQUIPPED FOR MORE
Conquer the outdoors with thoughtful convenience features that will make your weekend adventures more enjoyable.ADDITIONAL
- Maxxis Bighorn tires
- Double-X steel tube frame
- Additional DC outlet in rear
- Additional DC outlet in rear
- Double-X steel tube frame
- Maxxis Bighorn tires
- EQUIPPED FOR MORE
- BUILT FOR ADVENTURE
- POWERFUL & RESPONSIVE
- REAL STRENGTH
-
31
Selling 2 shocks together bought for Motorhome did not work could not return to company
-
32
I am looking for a mini excavator also open to a larger one as well can pay cash 902-237-9911 thanks
-
33
Freightliner Columbia 2007
13 speed manual
Detroit 60 series engine
Contact 9024032655
-
34
1R 22.5 truck Tires all around 20 percent left on tread price $ 100 call there going fast 506 461 3657
-
35
2 new shocks for a frightliner. Never been mounted part # 16-18708-000 they will fit frightliner cascadea 2008-2021 and frightliner M2 2002-2022. $190 OBO.
-
36
Very good condition John Deere 4045DF150 with rockford 4-11256 (twin disk) clutch power unit.
ONLY 2500hrsShipping available
-
37
Attachments for all makes and models of Excavators
MADE IN CANADA
2 Year WarrantyAttachments Available:
Ditch Cleaning Buckets
HD Tooth Buckets
Twist/Tilt Buckets
Extreme Duty Rock Buckets
Root Rakes
Skeleton Buckets
Hydraulic Thumbs
4 in 1 Buckets
Trapezoidal Buckets
Mechanical Concrete Pulverizers
Chuck Blades
Couplers (Pin Grab, Wedge, Hydraulic or Mechanical)
Screening Buckets
Grapples - Log, Demo, Clam-Shell, Orange Peel
Frost RippersGRITT Equipment Sales
-
38
2016 Cat 320EL with Hydraulic Thumb forestry cage for front window , also plumbed for a mulcher Hours 7760 undercarriage around 70 percent Air condition cab back up camera call Steve anytime 506 461 3657 SD EQUIPMENT LTD EXCAVATOR IS IN FREDERICTON NB ((FINANCE AVAILABLE DELIVERY AVAILABLE ))
-
39
New hydraulic pump
Requires an engine
-
40
THESE ARE TWO OKADA 2020 BUT NOW CONSIDERED 2023 HAMMERS BOTH TOTALLY REBUILT WITH STAGE 2 REBUILD KITS WHICH INCLUDED ALL NEW BUSHINGS - NEW SEAL KIT - NEW PISTONS AND TWO NEW MOIL POINTS RESEALED AT OKADA FACTORY REPAIR SHOP - BOTH WERE LITTLE USED - RESEALING DUE TO SITTING DUE TO COVID - BUT DECIDED TO MAKE THEM BOTH AS NEW c/w 6 MONTHS FULL WARRANTY FROM OKADA NORTH AMERICA STARTING THE DAY YOU RECEIVE THE HAMMER.
2020 Okada ORV7500 Hydraulic Demo Hammer Breaker Chisel Attachment Tool
LOW HOUR 2020 MODEL 7500 FT LB HAMMER USED 1 JOB BEFORE COVID - CURRENTLY FINISHED A COMPLETE REBUILT TO NEW AT OKADA'S OREGAN FACTORY REBUILD FACILITY
HAVING A COMPLETE RESEAL AND NEW NITROGEN CHARGE ALONG WITH NEW FACTORY PISTON AND ALL NEW BUSHINGS AND SEAL KIT COMES WITH 1 NEW OKDA MOIL POINT AND 1 AS NEW OKADA MOIL POINT SO 2 NEW POINTS
WILL BE SHIPPED DIRECTLY FROM OUR LANGLEY BC YARD THERE TO BUYERS YARD - WILL SHIP ON OUR ACCOUNT WE GET FAST SERVICE AND GREAT RATES
TAKE OKADA ORV7500 — MID CLASS HYDRAULIC BREAKER READY TO WORK FOR $60,000.00 CDN
SEE IMAGE 4 FOR A USED ONE FOR SALE THAT IS 2 SERIAL NUMBERS OFF OF OUR FACTORY REBUILT - RESEALED UNIT
AND TAKE THE OKADA TOP150 — 3000 FT-LBS CLASS HYDRAULIC BREAKER FOR $30,000.00
FRANK 604-476-7777
OKADA ORV7500 — MID CLASS HYDRAULIC BREAKER
ORV Series hydraulic breakers for use with skid steer loaders, mini and small excavators and tractor loader backhoes.
AUTO-LUBE
A central grease port with internal grease passage allows you to easily adapt the hammer to most auto lube systems.
MAIN VALVE
The internal control valve system equates to faster speeds and higher impact energy while still allowing the breaker to operate at cooler temperatures.
ACCUMULATOR
The large capacity accumulator reduces shock load in the system.
STROKE ADJUSTER
Variable speed control in the breaker maximizes productivity.
ORIGINAL HOLDING SYSTEM
The powercell is securely held inside the bracket with the head damper, reducing recoil.
LARGER N2 GAS CHAMBER
Ensures high impact power.
LONG STROKE PISTON
Increases impact power and reduces vibration and recoil.
DUAL CHISEL RETAINING PIN
Heavy-duty chisel set pins in many Okada models offer extended service life.
DURABLE BREAKER BRACKET
Includes a heavy-duty bottom plate that protects the powercell and reduces noise and vibration.
Technical Data
IMPACT ENERGY CLASS 7500 ft-lb / 10170 JOULES
OPERATING WEIGHT 5950 lbs / 2698 kg
OIL FLOW 63-72 gpm / 238-272 lpm
FREQUENCY 230-400 bpm L-mode / 270-470 S-mode
OPERATING PRESSURE 2320-2600 psi / 157-180 bar
MECHANICAL ENERGY 98-133 HP / 73.4-99.5 KW
MECHANICAL ENERGY AVG 115.5 HP / 86 KW
UNIT WORKING LENGTH 124 in / 315 cm
TOOL DIAMETER 6.1 in / 155 mm
TOOL WORKING LENGTH 30.2 IN / 767 MM
85DB(A) LEVEL DISTANCE 119-167 ft / 36-51 M
CARRIER WEIGHT RANGE 60-92 lbs. / 27-42 M tonOKADA TOP150 — 3000 FT-LBS CLASS HYDRAULIC BREAKER
Okada’s medium class breakers are available in a wide range of designs, from those specifically engineered to provide maximum impact energy for the toughest rock applications to others suited for a combination of concrete and rock breaking with the potential for faster blow speeds.
Precision machining processes and strict Okada quality control are used to produce all main breaker components. There is no need for complete assembly replacements and the use of high precision parts mean economical, labor-saving rebuilds of your Okada breaker.
Breaker brackets are made of heavy gauge high tensile steel plates and are designed to give maximum protection to the breaker body and dissipate heat while making it easier to access the equipment during daily maintenance inspection.
Okada bushing designs, a special heat treatment process and individually lubricated bushings enhance the service life of wear parts.
Technical Data:
IMPACT ENERGY CLASS 3000 ft-lb / 4068 JOULES
OPERATING WEIGHT 3000 lbs / 1361 kg
OIL FLOW 30-35 gpm / 114-132 lpm
FREQUENCY 600-750 bpm L-mode
OPERATING PRESSURE 2030-2620 psi / 140-180 bar
MECHANICAL ENERGY 42-63 hp / 31-47 kw
MECHANICAL ENERGY AVG 52.5 hp / 39 kw
UNIT WORKING LENGTH 94 in / 239 cm
TOOL DIAMETER 4.8 in / 122 mm
TOOL WORKING LENGTH 24 in / 610 mm
CARRIER WEIGHT RANGE 28-42 lbs. / 13-19 M tonWE ALSO HAVE A $80k NEW OLD STOCK OKADA DEMOLTION PROCESSOR THAT FOR 200-350 CLASS MACHINES - SEE MY OTHER ADS FOR $35,000.00
-
41
FITS 250-500 CLASS EXCAVATORS - $92k REPLACMENT COST
BRAND NEW EXTREME DUTY EXCAVATOR MOUNTED LOGGING 20K CAPACITY GRAPPLE C/W WITH NEW CUSTOM EXTREME DUTY $7500.00 BOLT ON TOP PLATE SYSTEM - THIS IS NOT A WELD ON SYSTEM BUT CUSTOM ONE WAY THREADED BOLT ON SO YOU CAN CHANGE EAR SETS QUICKLY WITH ONLY A MILWAUKEE ELECTRIC IMPACT REQUIRED ON ONE WAY EASY ACCESS BOLTS
TAKE THIS 85,000.00 PLUS COST OF TOP PLATE SYSTEM GRAPPLE FOR $45K JUST LOWERED THE PRICES TO MOVE THIS EQUIPMENT QUICKLY - FRANK 604-476-7777 OR TOLL FREE Phone : 1-(833) 693-9323 ONLY SELLING AS LEAVING BC TO MOVE TO OUR NEW HOME IN NB AFTER 53 YEARS IN DEMOLITION - TRUCKING
MODEL T40HPX-114 2 CUBIC YARD 360 DEGREE ROTATION GRAPPLE 19000 LB CAPACITY - BRAND NEW DEMOLITION OR LOGGING GRAPPLE WITH HPX DRIVE NO HYDRAULIC CYLINDER GRAPPLE
CURRENTLY AT DC WELDING WHO IS INSTALLLED A BRAND NEW BOLT ON TOP PLATE WITH 90MM PINS WITH 12.80 INCHES BETWEEN THE EARS TO PUT ON A PC360LC-10 WITH GEITH PIN GRABBER COUPLER - THAT EXCAVATOR IS NOW SOLD.
WE WERE ALSO GOING TO MOUNT ON OUR LONG REACH PC450LC-8 KOMATUD WITH PIN GRABBER MOUNT BY BUILDING ANOTHER 100 MM BOLT ON TOP PLATE
HAS CONSTANT HI-PRESSURE GRABBING FORCES AND DOES NOT RELEASE PRESSURE UNTIL DONE BY THE OPERATOR
THIS USES A HELIX STYLE DRIVE AND INTERNAL ROTATOR - IT HAS A QUICK CHANGE GRAPPLE SYSTEM TO CHANGE TO MULTIPLE CHOICES FOR DIFFERENT GRAPPLE ARMS FROM LOGGING - DEMOLITION - ETC
BASE GRAPPLE NEW IS OVER $85,000.00 PLUS OVERSEAS SHIPPING - CUSTOMS AND 16 WEEKS OF LEAD TIME
PERFECT FOR UNDERWATER WORK, LOGGING OR DEMOLITION AS NEVER EXPOSE HYDRAULIC CYLINDERS WHEN WORKING
TAKE THIS NEW GRAPPLE TODAY FOR $45,000.00 WITH THE NEW BOLT ON TOP PLATE IN PLACE
ONLY SELLING AS WE ARE RETIRING AND SELLING ALL MY EXCAVATORS AND ATTACHMENTS
JUST LOWERED THE PRICES TO MOVE THIS EQUIPMENT QUICKLY AS RETIRING BACK TO OUR NEW HOME IN NB DUE TO HEALTH ISSUES FROM THE FOREST FIRE SMOKE PARTICULATES AND EXTREME TRAFFIC AND ITS SMOG IN THE FRASER VALLEY AND CLEARING OUT MY YARD TOTALLY
WILL SHIP QUICKLY WE GET GREAT RATES AND SERVICE AND CAN HAVE A TRUCK UNDER IT NEXT BUSINESS DAY
FRANK 604-476-7777
THIS GRAPPLE WILL PIN ON THE FOLLOWING MACHINES DIRECTLY OR ANY PIN GRABBER THAT TAKES 90 MM PINS WITH 12.80 INCHES ACROSS THE BOTTOM MOUNT
Case CX240
Case CX240
Case CX290
Case CX290Komatsu PC240
Komatsu PC240
Komatsu PC250-6
Komatsu PC270
Komatsu PC270LC-6
Komatsu PC270LC-7
Komatsu PC280
Komatsu PC280
Komatsu PC290Link-Belt 240LX
Link-Belt 290LX
Link-Belt 3400 QUANTUM
Link-Belt 3900 QUANTUMALL PARTS AND QUICK CHANGE GRAPPLE SHELLS (ARMS) ARE AVAILABLE FROM:
KINSHOFER Canada
5040 Mainway Drive, Unit #11
Burlington, ON, L7L 7G5
Tel.: +1 (905) 335 2856
Fax: +1 (905) 335 4529
Toll Free (North America): 1 (800) 268 9525
Email: sales-northamerica@kinshofer.comKINSHOFER GmbH is a leading manufacturer of attachments for truck cranes and excavators for the most important industries worldwide.
From our headquarters in Holzkirchen, Bavaria, we offer our customers an extensive range of attachments for equipment carriers with or without hydraulics for scrap, demolition, track construction, landscaping, general construction, snow clearing, excavation, road construction, forestry, recycling, etc.
The continuing demand for transportation and infrastructure is constantly driving our product development and the service we offer. As a result, we are continuously expanding our product range in order to develop and produce technical highlights in the industries.
The cylinderless and low-maintenance technologies that are used for the HPXdrive on grapples or the NOX tiltrotators and TC tilt couplers are examples of these innovations, as are the products for special requirements or unusual uses from our special solutions department.
With high quality, variety and the latest technology, KINSHOFER crane and excavator attachments set standards worldwide.
Technologies - HPXdrive Excavator
Functional exchange, depending on demands!
During times of growing costs and environmental awareness, efficient working is getting more and more important.
The HPXdrive stands out thanks to its extended lifetime compared to a conventional cylinder-driven grab.Compared to conventional cylinder grabs, the closing force of the HPXdrive is high and constant during the entire operation.
The movement of the arms is generated by two hollow shafts, which run opposd and have a helix thread, hydraulically driven by a single piston.
The resulting closing force is always the same no matter the position of the shellsThanks to the shell exchange system you are able to clearly lower the investment costs for your fleet.
Just change fast and easy to the suitable shell option depending on the task.
The reliable shell exchange system features an easy loosening of the shells in case of exchange and a safe and steady holding of loads during every task.
Setup times can be reduced to a minimum.
The flexibility of your work processes as well as your competitive abilities can be increased.
-
42
HINO 185
Good cab, motor and transmission
Hiab crane
Runs good
Requires brakes (rusty and sticky)
Idea for farm, automatic and crane would be very useful
Crane can be sold separate
-
43
For sale a new Rockwell automatic slack adjuster part # R80 1073 asking $100.00 phone 902 860 1224
-
44
Tire machine 1-800-361-4095 ** ** Tire machine MONDIAL TC-325 HelpvSwing arm Tire changer with Bead Blaster It allows to remove and install regular low profile/runflat tires up to 24 "in diameter thanks to the pneumatic Help arm. Plastic inserts are provided to protect the alloy wheels.
TC-325 Specifications
Rim clamping outside 10"-22"
Rim clamping inside 12"-24"
Motor: 2HP, 15 AMPS, 120V/60Hz
Maximum Tire Diameter 41"
Wheel width:3’’-15"
Operating pressure 115-145 psi
- One year warranty on parts. We have all spare parts in stock.
-Transport service and delivery available across Canada, can be picked up at the local terminal delivery fees applies.Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
45
-PISTON RING SET, HASTINGS #2C7859 (STD), CONTINENTAL TRACTORS N-Y-F SERIES. $50.00/set.
-ROD BEARING SET, TRW #CB726P/3764CP, FOR BUDA 4CD C645-6DC844, 6MO SERIES. $40.00/set.
-(4 only) ENGINE VALVES, MCQUAY NORRIS #V1139, 4-CYL CASE, CO-OP, WAUKESHAW FC-FK-6Z-KA, 1935-41. $20.00/4.
-(2 only) VALVE GUIDES, MCQUAY NORRIS #G497, FOR ALLIS CHALMERS 1956-59, D17-WD45D, BUDA. $5.00/2.
Check part numbers for all applications.
PICK UP IN HAMMONDS PLAINS. Shipping available by Canada Post at cost.
-
46
In excellent condition. Brand new 30inch tires and system 3 rims (Pkg worth $2500) Fully enclosed All fluids changed. 3500 lb warn wench, front and rear bumpers, factory yamaha rear storage box. Old factory rims go with it. $22,000 obo will also take trade for cash and old Yamaha or Kawasaki snowmobile call 902-233-0788.
-
47
Front and rear bumper to protect your quad
• 2500 lb winch to get you out of trouble
• Luggage rack extension on the front rack to more easily attach objects
• New LED lights
• Great looking 14" black aluminum wheels
• 26" Duro Powergrip tires provide plenty of traction
• Snow Bear trailer included and $500 gift card that could be used to purchase a helmet. Truly is a great package for anyone just starting or looking to upgrade.
Includes 2 years manufacturer warranty.
-
48
Great shape. Has a few extras on it. Rear bag, front bag and windshield. Hand protectors. Really fun sled. 137” track with studs
-
49
Price lowered to stay competitive with other bikes for sale. Awesome deal and in great shape - just serviced and ready to go. Very low kms - 1198 kms. Only used on smooth trails and around the yard. Heated grips and thumb warmer and a horn. Hand guards included.
A formidable, mid-sized ATV with plenty of power and storage.
270cc 4-stroke Engine
Double A-Arm Front Suspension
Swing-Arm Style Rear Suspension
500-lb Towing Capacity
Automatic CVT transmission
Simple, ready-to-ride acceleration perfect for beginners and seasoned off-roaders alike.
-
50
Would be an ideal "Restoration Project". Tunnel is solid, no cracks or breaks on hood, 290ss Sachs Single Cylinder Engine, New "NOS" Walbro WD Carb, New throttle cable. Also have New Seat Cover, New Wear Bars, New Brake Cable, & New Tail-light Assembly to go with Sled. Track is in fair condition. NO LOW-BALLERS!! Do not need to sell!!