Buy and sell with in Canada, Ontario, Kingston.
-
1
Four 6 ton stands
Lift range 15-3/8 to 24-5/16"
Motomaster
-
2
Propane heater 125
-
3
Milwaukee Tool Right Angle Corded Drill
Milwaukee Tool 90 Degree, 1/2-inch Corded Drill with Case
I used it just for a couple hours the price is $299, please text it me if you are interested, 416 875 7177 Bob
-
4
New item propane oxygen cutting torches in good working order once you've used these you'll never use acetylene again comes with everything you need but the barbecue tank & everybody's got a barbecue tank looking for 325 cash this offer includes a half full 23 cubic foot oxygen tank two good Harris regulators good hose and a good Harris cutting torch with a new propane oxygen cutting tip all you need is a barbecue tank and you're up and running and you own it all no fees no rentals just the cost of gas when it's sitting in the corner it doesn't cost you a cent but when you need a torch it's right there for you if interested call Dave after 2:00 p.m. at 613-888-2684 there is no text at this number but you can call thanks for looking Dave
-
5
$40 for both. firm. Only willing to sell together. Two DCB107 DeWalt chargers. Brand new condition. If this ad is still up they are still available
-
6
Works good 125
-
7
Only used a couple times. Basically new.
-
8
Good working
-
9
Looking For Small O2 Tanks For Cutting Torches
Please Let Me Know What You Have & The Price
Thanks Dave 613-888-2684 Please Call After 2 PM
As I Have No Text So Call
-
10
Car Jack that has never been used
-
11
This is more than a brochure for the Canon T90 camera as it highlights all the fantastic feature of the T90 and shows how to use them as well. Brochure is in perfect shape.
-
12
digital rotating display
-
13
Sony ca-Tx7 has remote , 100ft of cable , 2 units available , local pickup only, price is 100.00 per unit
-
14
This is a Canon Wireless Controller LC-2 which consists of a wireless transmitter and receiver. The LC-2 uses infrared light emitted by an infrared LED. This system has two channels which means it can control two cameras. The battery connections are in perfect condition.
-
15
euc..Minolta uc 8×18 7.5... obo.. see my other ads
-
16
NikonD50 Camera
Two recharchable batteries
Cords
Card reader
Extra telephoto macro lense (detachable)
Extra directional flash (detachable)
Case
Instructional course and quick start manual
Shipping extra.
-
17
Provides flash and video lighting for DSLR cameras. Purchased from amazon a few years ago and never used.
-
18
Have a” rare” Eastman Kodak 1887 Bullseye model D camera wooden tripod , in excellent condition! This tripod is in excellent condition and shape for its age, this can be used for displaying a vintage model D camera or just use for display or for any camera! It has the original leather band! This is a very hard find in this condition and has been left in as found condition, needs no attention to use or display! If ads up it’s still available, asking $150, shipping can be arranged at buyers expense.
-
19
Photo slides Hamafix ,Germany1,6 mm 5x5/24x36,100 pc. Brand new,in box. Gepe,Sweden,new,24x36,100 pc.New price:$16/each or both for $30. Belong to my late husband, prof photographer .
-
20
SONY Small Bag for Camera in good condition. Red.
-
21
This is a Monster Power home theatre power center surge protector 8 outlet HT800 power bar for sale. It is in good functional condition. 8 power outlets and 2 coax outlets. This unit was removed from a government surplus emergency response command centre trailer. Price negotiable. Shipping available at the buyer's expense.
MANUFACTURER'S INFORMATION:
The Monster HT 800 Home Theater PowerCenter has a Monster Clean Power Stage 1 filter for noise-free power for sensitive electronic components and protection from power surges. It has 8 colour-coded outlets plus a coaxial line protector to guard your system against sudden power surges and spikes. The audible system alarm, colour-coded outlets and visible surge indicator all combine to provide a high level of security for your valuable electronics.
- The 1850-joule rating provides a high level of protection in the event of sudden power surges
- Monster Clean Power Stage 1 filters provide noise-free power to your sensitive electronic components, lengthening shelf life and improving performance
- Color-coded, labelled outlets are provided that make it difficult to confuse one cable with another
- The 8' Monster AC power cable with FlatProfile right-angle plug provides flexible installation options
- Eight total outlets, including 3 spaced for use with AC adapters, ensure maximum compatibility with a variety of electronic devices
-
22
Steba ZP 1 85W Black,Stainless Steel Electric Citrus Press. Posted in electronics, general electronics in Kingston. December 27, 2022
-
23
Ultrasonic Plus Perimeter Alarm, Dual protection
No installion, just plug in, ready to use.
Foam front pad is missing, does not affect use, could easily be replaced as it is cosmetic.
Works, includes original box and manual
-
24
I have a whole variety of Apple watch bands for all sizes they even fit the new Apple watch ultra.
$5 each or 3 for $10.
Really nice high quality bands.
-
25
Need to expand your Arduino project?
The IO expansion board is evolving, this latest V5 IO expansion shield now supports XbeeIt combines our popular Xbee shield with IO expansion shield(V4)
As its predecessor, it supports RS485, APC220, Bluetooth communication, servo control.
SD module socket
Digital pins
Servo power
Xbee bluetooth bee socket
Power in
3.3V output
Analog input
I2C pin
APC200 Bluetooth socket
RS485; RS485/RS32 Selection jumpers
-
26
ARDUINO UNO CLONE with CABLE. This UNO is made in China from the Arduino files provided by Arduino on their web site.
This is a lower cost module for anyone on a budget or prototyping phase where the board may get damaged. These have performed very well.
USB cable is included. Get building right away. This is a Rev 3 version. REV3
-
27
ARDUINO DUE CLONE
The Due is Arduino's first ARM-based development board.
Based on a powerful 32bit CortexM3 ARM microcontroller made programmable through the Arduino IDE.
It increases the computing power available to Arduino users keeping the language as compatible as possible so that many programs will be migrated in a matter of minutes!
The Arduino Due has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), an 84 MHz clock, a USB-OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button.
Other features like DACs, Audio, DMA , an experimental multi tasking library. To compile code for the ARM processor, you'll need the latest version of the Arduino IDE: v1.5 (After a period of testing and debugging this will replace the 1.0.1 IDE altogether)
BEWARE! The Arduino Due board runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Providing higher voltages, like 5V to an I/O pin could damage the board. Because of the limitations of system voltage imposed by the Atmel SAM3X8E, Arduino shields that are based on the 5v models won't work properly. All the shields that fully implement the Arduino R3 layout are compatible straight away (like the Arduino WiFi shield and Ethernet Shield) but other shields might not be compatible.
Features:
Microcontroller: AT91SAM3X8E
Operating Voltage: 3.3V
Recommended Input Voltage: 7-12V
Min-Max Input Voltage: 6-20V
Digital I/O Pins: 54 (of which 12 provide PWM output)
Analog Input Pins: 12
Analog Outputs Pins: 2
Total DC Output Current on all I/O lines: 130 mA
DC Current for 3.3V Pin: 800 mA
DC Current for 5V Pin: 800 mA
Flash Memory: 512 KB all available for the user applications
SRAM: 96 KB (two banks: 64KB and 32KB)
Clock Speed: 84 MHzArduino Due (Arm Core) benefits over other Arduinos
The Due has a 32-bit ARM core that can outperform typical 8-bit microcontroller boards. The most significant differences are:
A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
CPU Clock at 84Mhz.
96 KBytes of SRAM.
512 KBytes of Flash memory for code.
a DMA controller, that can relieve the CPU from doing memory intensive tasks.
-
28
The InvenSense MPU-6050 sensor contains a MEMS accelerometer and a MEMS gyro in a single chip. It is very accurate, as it contains a 16-bit analog to digital converter for each channel. It captures the x, y, and z channel at the same time. The sensor uses the I2C-bus to interface with the Arduino.
The MPU-6050 is not expensive, especially given the fact that it combines both an accelerometer and a gyro. We are always happy to solder pins to any of the modules purchased from us.Features :
- MPU 6050 Motion Sensor module first integrated 3-axis gyroscope, 3-axis accelerometer
- Chip:MPU-6050
- Power supply:3v-5V power
- gyroscope range: + 250 500 1000 2000 / s
- Acceleration range: ᄆ 2 ᄆ 4 ᄆ 8 ᄆ 16 gGY521 MPU-6050 Module 3 Axis Gyroscope+Accelerometer
-
29
16 ᵍᵇ . 2ᵍ ʳᵃᵐ ʷⁱᵗʰ ʳᵉᵐᵒᵗᵉ ʲᵘˢᵗ ˢᵗᵒʳᵉᵈ ᵃʷᵃʸ ᵗ.95 ᵐᵒᵈᵉˡ ᵍʳᵉᵃᵗ ᶠᵒʳ ᵍᵉᵗᵗⁱⁿᵍ ᵃᵖᵖˢ ᵗʰᵃᵗ ʸᵒᵘ ᵈᵒⁿᵗ ᵖᵃʸ ᶠᵒʳ .ᵉᵃˢʸ ⁱⁿˢᵗᵃˡˡ ᶜʰᵉᵃᵖ..
-
30
This is a C Com iNetVu 7000 VSAT antenna controller C7000B software version 2.0. It is in good functional condition and has been barely used. It was removed from a government surplus emergency response command centre trailer. It was always kept indoors and has been in climate-controlled storage since removal. Pictures are of the actual item. Price is negotiable. Shipping available at the buyer's expense.
MANUFACTURER'S INFORMATION:
The iNetVu 7000 Controller is ideal for applications that require a quick, simple setup and reliable connection. The New iNetVu 7000 Controller features optimal, high-precision carbon fibre, auto-deploy antenna pointing, front panel configuration and GPS signal available for external devices. The DVB-S2/ACM Tuner is an integrated part of all iNetVu® 7000/7024 Controllers. It allows the iNetVu® system the option to find the satellite with and without the use of a satellite modem. Compact and adaptable, this high-performance tuner is programmable to any DVB-S or DVB-S2/ACM frequency and allows the user to pre-configure specific satellite options.• Simple stand-alone one-touch operation to find satellite and stow antenna
• Typical satellite acquisition time in less than 2 minutes
• Ideal for applications that require a quick, simple setup and reliable connection
• Internal DVB receiver provides modem independence
• Based on an embedded software solution
• DVB Search - Searches directly for any DVB-S or DVB-S2 (ACM) carrier on the target satellite and peaks on it.
• DVB Search, Opposite Polarity – Searches for DVB-S or DVB-S2 carrier in the opposite polarity on target satellite, then rotates polarization axes and enables transmitter if modem signal attained.
• DVB Search, Reference Satellite - Searches for a DVB-S or DVB-S2 carrier on ANY configured reference satellite then moves to the target satellite and peaks on modem signal.
• RF Automatic Search – The system will stop and search for modem signal when it senses an increase in RF energy received through the DVB tuner as it passes by the target satellite. If the modem signal is found, the system will begin the peak process.
• RF Override Search – The user specifies an RF Threshold such that the system stops when it reaches an area above the threshold and looks for a modem signal to peak on.
• Beacon Receiver – The Controller works seamlessly with the optional iNetVu® Beacon Receiver by searching for a specified beacon frequency and then peaks on it (search gain level can be adjusted).
• Auto-Deploy Method - Peaks on a reference satellite then uses a precise pointing mechanism to locate the target satellite, even when no modem RF or beacon signal is available to peak on.
• Compatible with all iNetVu® mobile platforms
• Supports DVB-S and DVB-S2/ACM frequencies
• Optimal, high-precision antenna pointing
• Remote access and operation via Network, Web and other Interfaces
• Built-in motion and movement protection for safety
• Supports inclined orbit satellites
• Integrated with multiple modems
• Works with GPS and GLONASS Satellite Navigation Systems
• Global Position Information available for external devices
• Easy to configure and operate
• Interoperable with Uplogix’s remote management appliancesFor use with:
iNetVu MA-1200
iNetVu 1500
iNetVu 1800+
HughesNet DW 6000/7000HN 7000/7000SHN 9200/9260HN 9400/9460HN 9600/9800HX 50/90/100/200/250/260HT 1100/2000
ipstar IPX-5100/9200 IPX-3200
GilatSkyedge II/IPSkyedge II/Pro/AccessSkyedge IIc (Standalone)
iDirect iNFINITI 3000/5000/7000 Series Evolution X5/X7
Comtech/ Radyne CDM-600L/570L/625/840DMD 20/DMD 20 LBST SkyWire MDX420
Romantis/UHP/Eastar UHP-1000
STM SatLink 1000/1910/2000/2900
Newtec MDM-3100 (standalone)
Viasat Linkstar II/IV/S2/S2ASurfbeam ll/PROSurfbeam ll Auto-acquire Tooway/PRO
Paradise Evolution/ Quantum Series
Tachyon CI-1300 Ruggedized RMG
Advantech S5100S5420
-
31
Sliding attachment for cabinet type table saw. Was installed on delta unisaw
Best offer.
-
32
Wood screw clamps, 4.75" throat, solid maple, made in Canada.
Set of two clamps.
-
33
Used ts 760 stihl chop saw
-
34
Thanks for taking a look!
I have five 16’ ISOP brand rope ladders for sale
These are new and fault free
Price is each, the ladders come with carabiners.
These are tailored to be used for fire escape but can be used for many other purposes such a treehouses, attics, road travel, balcony access etc.
Here are some info links
https://isopllc.com/ca/product/fire-escape-ladder-2-story-16-ft/
Have a good day
-
35
Marking Gauge, 8.5" lg. post, brass rub strips.
-
36
3hp
60gal tank
220 service
It's in great shape and runs well.
I'm selling for my boss (613-561-3518)
-
37
Older pick axes & flat shovels have 7 like to sell them all make an offer thanks
-
38
Mtx-60 jumping jack 46 hours on it
-
39
Lot of Ilford Multigrade photo darkroom paper
Everything has been kept refrigerated by a professional photographer. Some of it is older, and some of it is newer. I have been working with photo paper off and on most of my life and when you refrigerate paper it stays just like new. There is a full box 100 sheets of 5 x 7 & 8 x 10
Paper as well as 25 sheets of an additional 8 x 10 paper the rest of the boxes on the left of the photo are all partial boxes. If you have priced out photo paper, you’ll recognize this has a good deal.
-
40
Like New System only used twice.
Magnetic Clip and 3M Sticky Tabe in box.
Great cellphone Gimbal. I no longer use it. Good for vlogging, travel video, social media managers and behind the scenes for videographers.
Pickup in Bath or I can meet in Kingston or Belleville.
-
41
bobEverything is working well and the lens is an excellent condition. The lens is a high-quality Schneider Companar 50mm f/2.8 lens. The filter drawer is missing but you can simply put a piece of tape over that to keep light leakage from coming out of the enlarger. Also includes a 35 mm negative carrier. My background as I’ve been using darkroom equipment for over 40 years so I’m very very familiar with it. I am selling a product I fully understand. If you’re in need of other dark room items like trays or focusing aids or paper or timers or anything like that I have a pile of it here. Please be specific on your needs if you have an inquiry.
I am happy to ship at the buyers expense. Please do not ask if it’s available. If you see the ad it is available
-
42
Everything is in great condition and can buy them separately
-
43
Kodak Brownie Target Six-20.
5"x3"x4"h
Made in Canada.
-
44
I Everything is in like new condition and includes a lowpro belt as well. I don’t know a lot about this equipment but I know it was being used by a professional videographer who passed away. This is really super heavy duty gear.
If you see the ad it is available. Please do not ask if it’s available.
Thank you.
-
45
Saunders/LPL 670DXL dichroic color/B&W darkroom enlarger mint
Absolutely pristine condition with manual. Includes for carriers in total. 645, 35 mm 2 1/2 x 2 1/2 and a universal adjustable carrier. Also includes a Nikon 50 mm and 80 mm lens. This is a great package for both 35 mm and 2 1/4 medium format. Everything works perfectly, and it includes a regulated power supply. The column and the base to come apart for shipping but it’s an extra tall columns so expect shipping to be a little more than normal. I do have the ability to safely ship items like this. This is a very rare in larger with a very uncommon package. This was used only by a professional photographer and with the greatest of care.
We have a special machine that can form around the shape of the Enlarger. We do charge an extra $25 to do this but it’s definitely worth Local pick up is ideal. I do travel to the Toronto area once every week or so so I could meet someone along an exit somewhere.
-
46
Sony Camera light with 10 foot cord. $15
-
47
Works perfectly. Great cosmetic shape. No Lav Mic included.
This is a great system for videographers, DJs, Public speaking events and hobbyists looking to improve audio for video or live event production.
Selling because I no longer use.
Pickup in Bath or I can meet in Kingston/Belleville for a small fee.
I have 2 pairs of these systems. I'd be willing to sell both for $350. No Lav Mic on either.
-
48
Nikon Z6 II FX Series Mirrorless Body (Z6II) + FTZ II Adapter--$2299.00+tax
Nikon Z6 II FX Series Mirrorless Body (Z6II) + FTZ II Adapter Included--$3099.00+tax
BJ Photo Labs Limited. Camera Store in Waterloo, Ontario (since 1984). ** Contact us for Price Match and Special Quotation!
Great selection of Nikon lenses available at our location in Waterloo ( one of the most comprehensive in Canada! ).We offer Free Canadapost shipping Expedited 1-3 days to most areas in Canada. We can offer
Purolator or Fedex Shipping options,
We aim to provide the best deal possible on Nikon Canada products. Authorized Nikon Canada dealer with 1 year Nikon Canada Warranty.
-
49
Shipping and Storage Containers on Sale.
Cheap delivery within Ontario.We are a professional Used storage containers provider in the area.
All of our shipping containers are 100% leak free. We deliver our used storage containers on our own state of the art tilt and load equipment that allows us to position the containers in challenging places.We pride ourselves on offering you the best customer service with the most competitive prices on storage containers.
Send us a quick email about your storage container size needs and delivery location and we will quote the best price delivered and offloaded on your property, on all our 20' and 40' storage containers!!!!
20ft - $$$ - please contact for a quote
40ft(8.5ftH) - $$$ - please contact for a quote
40ft(9.5ftH) - $$$$ - please contact for a quote
Buyer Beware!
Containers 4U will never ask you to pay for a shipping container before it is delivered to your site. If you are dealing with someone who is claiming to be from our company and they are telling you that you must pay before we ship anything to you it is a SCAM, note that our company very strict policy is full payment upon delivery of the unit(s) not prior to delivery.(613) 900-0307
Danny
-
50
A really nice collectable for any Mario fan. Features, action figure, and card.
Made by Kenner toys 1997 .
Of note, the cardboard backing has bends in it as seen, and the plastic is detaching from the cardboard around the top of the card area as seen as well .
Located in both Kingston/Westport and can meet or deliver to most surrounding areas. Shipping also available. Make sure to check out my other items for sale.