Audio-Technica AT2020PK Streaming / Podcasting Pack with Cardioid Dynamic USB/XLR Microphone and Headphone
Description
We Ship Coast to Coast From Our Oakville, Ontario Showroom.
Audio-Technica AT2020PK Streaming / Podcasting Pack with AT202020 Mic, ATH-M20x Headphones and Studio Boom Arm
The AT2020PK vocal microphone pack is designed for streamers, podcasters, and other content creators who need a versatile, easy-to-install, easy-to-adjust boom microphone setup. The pack includes an AT2020 cardioid condenser microphone, a pair of ATH-M20x professional monitor headphones and a studio boom arm threaded with a XLR cable.
AT2005USB Cardioid Dynamic USB/XLR Microphone
- Handheld dynamic microphone with USB digital output for use with computers and XLR analog output for use with conventional microphone inputs
- Smooth, extended frequency response ideally suited for podcasting, streaming, home studio recording and voiceover use
- Built-in headphone jack allows you to directly monitor from your microphone
- Adjust headphone volume with easy-to-use controls on the bottom of the microphone
- High-quality AD converter with 16-bit, 44.1/48 kHz sampling rate
- Low-mass diaphragm provides excellent frequency response
- Cardioid polar pattern reduces pickup of unwanted sounds from the sides and rear, improving isolation of desired sound source
- Threaded stand clamp attaches securely to the boom arm
- Durable metal construction for long-lasting performance
- On/off switch functions for both USB and analog operation
ATH-M20x Professional Monitor Headphones
- Advanced build quality and engineering
- 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
- Tuned for enhanced low-frequency performance
- Circumaural design contours around the ears for excellent sound isolation in loud environments
- Convenient single-side cable exit
Adjustable Studio Boom Arm
- Full 360° rotation
- Adjustable, spring-stabilized joints with thumbscrews for easy repositioning of the microphone
- Clamps securely to desks, tables and other flat surfaces up to 55 mm (2.2") thick
- Included USB cable (Mini-B to Type A) extends 3 m (10') from the base of the boom arm
- Internal cable management for clean desk appearance
The adjustable studio boom arm clamps securely to desks, tables and other flat surfaces up to 55 mm (2.2") thick. The boom is threaded internally with an XLR cable for a clean appearance and unhindered operation. Offering full 360° rotation and adjustable, spring-stabilized joints, the boom arm repositions quickly for optimal mic placement.
The rugged AT2020 side-address studio condenser microphone features a low-mass diaphragm that is custom-engineered for extended frequency response and superior transient response for excellent vocal reproduction. The microphone offers a wide dynamic range and handles high SPLs with ease. Its analog XLR output connects easily to a digital converter or mixer.
Rounding out the pack are the ATH-M20x pro headphones, part of Audio-Technica’s critically acclaimed M-Series line. With 40 mm drivers tuned for enhanced low-frequency performance and comfortable, sound-isolating earpads, the M20x headphones are perfect for long monitoring sessions.
Stand mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
Specifications
Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 20 – 20,000 Hz
Open Circuit Sensitivity: -37 dB (14.1 mV) re 1V at 1 Pa
Maximum Input Sound Level: 144 dB SPL, 1 kHz at 1% T.H.D.
Noise: 20dB SPL
Dynamic Range: 124 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio: 74 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 48V DC, 2 mA typical
Weight: 345 g (12.1 oz)
Dimensions: Length; 162mm (6.38"), Maximum Body Diameter; 52 mm (2.05")
Output Connector: Integral 3-pin XLRM-type
Headphone Output Power: 130mW (at 1 kHz, 10% T.H.D., 32 ohm load)
ATH-M20x Headphones Specifications
Type: Closed-back dynamic
Driver Diameter: 40 mm
Magnet: Neodymium
Voice Coil: Copper-clad aluminum wire
Frequency Response: 15 – 20,000 Hz
Maximum Input Power: 700 mW at 1 kHz
Sensitivity: 96 dB
Impedance: 47 ohms
Weight: 190 g (6.7 oz), without cable and connector
Cable: 3.0 m (9.8'), straight, left-side exit
Accessories Included: 6.3 mm (1/4") snap-on adapter
Expert Island is a Canadian authorized Audio-Technica retailer, buy with confidence
*** for more Details or Questions, reply to this listing or just give us a call at 905-825-0999
***Come by and check out this and other great deals***
EXPERT ISLAND - 2538 SPEERS ROAD, UNIT # 10, OAKVILLE, ON L6L5K9
WE ARE OPEN
Monday & Tuesday - 10am to 6pm
Wednesday - CLOSED to the Public (By Appointment Only)
Thursday & Friday - 10am to 7pm
Saturday - 10am to 4pm
Sunday - CLOSED
***(always check our website for updates on store closures and/or Holiday Hours)*** www.expertisland.com
Shipping is an available service on all our products
- Ad Type: Offering
buy and sell | musical instruments | Pro Audio & Recording Equipment
2021-02-28