Cars & vehicles, Heavy equipment with in Canada, Alberta, Lloydminster.
-
1
1981 Steiger III Cougar PTA 280 Specs:
5-speed auto + 2-speed transmission
15L CAT motor
900x32 Trelleborg tires 90%
8870 hours
Replaced transmission
12’ manual angle dozer 12’ wing with new bushings and pins
$33’000 OBO
1981 Steiger III Cougar PTA 270 Specs:
5-speed auto + 2-speed transmission
10.5L CAT motor
800x32 Trelleborg tires 50%
14’500 hours, 2000 hours on rebuilt radiator, 5-speed Allison transmission, and engine. 1200 hours on rebuilt 2-speed transmission
12’ dozer, 12’ wing and 8’ grouser
2 new rims
$31’000 OBO
Both tractors always shedded in heated shop
Call or text (780) 808 - 34(five)3 for more info
-
2
Category: Self-Propelled Sprayers
2011 Spray Coupe 7660 Self Propelled Sprayer
Engine: 1656 hrs
Location: On lot
Options:
100-Foot
Poly
: 320/85R38 FRONTS
: 320/90R46 REARS
: GOODYEAR
: 100' ALUMINUM BOOM
: 725 GALLON POLY TANK
: SS PLUMBING
: CAPSTAN EVO BLENDED PULSE TECHNOLOGY
: AUTOBOOM HEIGHT CONTROL
: ATC
: DLX SEAT
: HID LIGHTS
: BEACON
: FENDERS
: 4 TRIDEKON CROP DIVIDERS
: AMS: RAVEN VIPER PRO MONITOR
: SMARTRAX
: PHOENIX 300 RECEIVER
For More Used Equipment Visit: www.agland.ca
Location: Agland Vermilion
Call Vernon OConnor at 780-874-4152
-
3
New HLA 96IN high volume skid snow bucket with 3/4x6 cutting edge!! $2460 cash price!! Also 78IN $1999 cash price!! Contact Dylan at Ireland Farm Equipment Vermilion AB (780) 581 5130. Authorized HLA dealer.
• 3/16” material, ¼” end plates
• 3/4 X 4 bevelled cutting edge
• Reinforced top lip
• Screened back for better visibility
• 38” deep, 32” high
• Reinforced round back and end plates
for strength, easy filling & clean out
• Flat top acts as level indicator
• Tapered end plates are self-cleaning
and reduces material build-up.
-
4
Verduyn Tarps now carries these 16' and 8' load leveler & ramp combo kit. Each ramp can also be used as a load leveler. when used with converts. The 16' ramps consists of four 20" x 96" Ramps, two Ramp Adjustable Stands and two 97" " Skid Seats.
These ramps are built from incredibly strong, yet lightweight aluminum which makes them easy to use. Ramps easily attach to the back of most trailers through the use of the clever skid-seats and stands.
The slope of the loading ramps can be easily modified through use of stands and additional ramps to make loading/unloading cargo easier if clearance or slope is an issue. These ramps/ load levelers have a capacity of 23,500 lbs.
Check out our other Kijii ads.
1-905-578-3677.
www.verduyntarps.com
YOUR TRUCKER’S TOY STORE
HAMILTON, ONTARIO
SHIPPING IS AVAILABLE ACROSS CANADA.
-
5
This system was a feedlot ration blending , mineral concentrates and grain storge, feed wagon loading system . System includes 4 steel tanks/bins used for mineral concentrates, grain storage aproximate size 20x14. 1 - 20x16 hopperbottom bin approximate size . 1 hopper bottom drive under fill station with storage bin above . Approximate size is 20x 20x30 steel frame on piles . This system was used to blend feedlot cattle rations . It was likely installed in the mid to later 70s . To the inventive individual it could be modified to fit into a grain handling system to fill grain haulers, grain trucks, super bs or grain semies or modified to be fertilizer storage and loading system or renovated to continue to be a feed ration system for cattle . This system is sold to be moved off site by April 30, 2021 or a agreed upon date. Cost of all moving, dismantling at buyers expense . Sold as is with no guarantees .
-
6
Custom diagnostics Laptops and communications adapters
Laptops custom build to what you want or chose one of my pre built ready to go software packages .
I can also do one program at a time on a laptop that you currently own this cuts down your cost .
-
7
We have a 16 foot International deep tillage cultivator with a full set of Degleman spring tooth harrows. Cultivator actually measures 17 foot but would think it is called a 16 foot. Cultivator has a full set of good shovels, shanks springs etc. and comes with the ram and hoses, are all good For more info call don at 780 755 2258 or send me an email. I would consider selling the harrows by themselves, harrows have not seen that much use.. This unit is on a farm north and east of wainwright.
-
8
Leon 9’ plow blade. Adjustable to fit variety of tractors. Has pin and bar to set at angle. Was mounted on JD 4430. Asking $1000 obo
-
9
Fixed blade v-blade snow blade
9 feet wide at bottom
Nearly 12 feet wide at top
40” tall at centre of blade
51” tall at ends of blade
-
10
Isx 15 2250 and 2350 engiens are prone to failing or failed high pressure fuel pumps , I’m offering inspection service and repair of your high pressure pumps before they fail and ruin your engien.
Many options to serve you best
I can come to you with service truck
I can have you bring me the pump to my shop
Or you can ship me your pump.
Prevent full engien failures with pro active fuel pump inspections , well known cause of major catastrophic engien damages
-
11
Binder - Torque Drive - 3/8- 1/2 Center Line Gear Set 9,200 WLL. Manufactured with heat treated, forged components for a long dependable life. Smooth operation, due to a precision aligned worm gear assembly with grease fitting, for years of trouble free service. This is truly a unique high quality binder.
Our binders help keep the operator’s gloves clean and dry. The operator only needs to hold on to the handle and portable drill. No need to rotate the barrel by hand like traditional binders.
Manual Binders are limited in many ways . Lever binders are dangerous and illegal in many states. Ratchet binders can be time consuming to operate, often needing to be reversed and re-tightened if not enough chain links are attached. TorqueDrive™ binders are the better choice.
TorqueDrive™ will save considerable time ratcheting down and releasing loads and saving time makes money!
Verduyn Tarps- Your Trucker Toy Store
Check out our website www.verduyntarps.com
Check out our other Kijiji ads.
HAMILTON, ONTARIO
SHIPPING IS AVAILABLE ACROSS CANADA.
-
12
-Tracks to fit T/A and Tri/A Tridrive truck tractors
-Tire and Rim/track to fit Truck tractor
-Unused
-Made in Edmonton
-Custom made skis 3’x9’
-$37k new....make me an offerKenworth peterbilt western star hagglund morooka argo mattrack camoplast
-
13
New HLA double prong bale spear $749!! Skid & ALO attachment.
• Kverneland tines @ 30” spacing
• Works well for either round bales or large square bales
• Not to be used for carrying 2 bales stacked on top of
each other
• 49” tines
• Approximate weight: 185 lbs
• 4000 lbs capacity @ 24” L.C.
• Frame width 50”
Contact Dylan at Ireland Farm Equipment Vermilion AB (780) 853 4013. Authorized HLA attachment dealer.
-
14
If you want diesel diagnostics programs but don’t want the hassle of going threw some one state side and having to set up a paypal account just for that reason. Message me and KJR diesel Ltd can take care of your diagnostics programs and diesel tuning needs for almost all applications, inquire threw add , most programs easily installed over team viewer application on line , message for more details we are competitively priced and quality is our goal.
Also supplying genuine communication adapters of most brands
-
15
I have a three point hitch bale spear for sale. It is good for class 1 and 2. Heavy duty, used for one year. Near new condition.
-
16
Purchased new at Redhead Equipment in Lloydminster in 2014. Intended to be rented out but has only lit up bin yards in harvest. Hours are original. Paid $14000 new, make me an offer
-
17
Good used hard core baler no longer need two balers so I’m keeping the one that has net wrap. Has 25000 bales under her belts so she has experience. Top rear roller was rebuilt last fall and made 45 bales since. Has had stuffer fingers redone. Always shedded monitor and manual included. Asking $8000 obo low ball offers will be ignored no trades please.
-
18
30”. Cat 1, up to 50 hp. Can throw in quick hitch pins four sets for and additional $100z
-
19
2021 South Fork Dumping Flatbeds
Turn Your Pickup into a Dump Truck?
Who wouldn’t want to turn their pickup into a dump truck? C5 Manufacturing is proud to offer South Fork Dump Flatbeds to customers in the lawn and landscape, light construction, agriculture and nursery industries. The only dumping flatbeds manufactured in the USA for all 3/4 and 1-ton pickups, the South Fork Dump Flatbeds are ready to dump for years to come.SOUTH FORK DUMPING FLATBEDS FEATURES:
• Self-contained power unit with hydraulic power up and power down
• Corded Pendant
• Stake pockets
• Rub rails
• Easy access to mechanical parts through large access doors
• Safety stand
• Mud flaps
• LED running lights in the rear of the bed
• Two 3 x 20 lift cylinders
• Two-part urethane paint for more durability and shine
• Highly visible warning, caution and danger decals
• 350-amp fuse and block attached to truck frame
• Heavy duty bent tube headache rack
• Heavy duty 205/16”, 30,000-pound rated hitch ball with 1” rise.
• Well-built all steel construction
• Grab handles on either side of headache rack
• Chain attachments for trailers
• LED lights
• Bolt on receiver hitch
SOUTH FORK DUMPING FLATBEDS OPTIONAL FEATURES:
• LED work lights in the headache rack
• Gooseneck Hitch
• 3” Sideboards comes with Standard headache rack
• 6” Sideboards comes with Standard headache rack
• 12” Sideboards comes with Standard headache rack
• 24” Sideboards comes with Box Style headache rack
• 36” Sideboards comes with Box Style headache rack
• 48” Sideboards comes with Box Style headache rack
• Clippings/leaf Sideboards
• HD hoist packageSIZES (South Fork Dumping Flatbeds are available in nine different sizes) :
37N Dump Flatbed - $11,343 + GST Including Installation
87.25″ wide x 82.75″ long
The 37N bed fits single wheel trucks with a very short bed. It has a 38” cab to axle measurement.42N Dump Flatbed - $11,478 + GST Including Installation
87.25″ wide by 87.75″ long
The 42N bed fits single wheel trucks with a short 6’ bed. It has a 42” cab to axle measurement.56N Dump Flatbed - $11,748 + GST Including Installation
87.25″ wide x 106.25″ long
The 56N bed fits a dually bed truck with a short 6’ bed. It has dual wheels and a 42” cab to axle measurement. This is often called a bed delete truck because it came from the factory with a bed on it.60N Dump Flatbed - $11,883 + GST Including Installation
87.25″ wide x 110” long
The 60N bed fits single wheel trucks with a standard 8’ bed. It has a 56” cab to axle measurement.37W Dump Flatbed - $11,748 + GST Including Installation
95.5″ wide x 82.75″ long
The 37W bed fits dual wheel trucks with a very short bed. It has a 38” cab to axle measurement.42W Dump Flatbed - $11,748 + GST Including Installation
95.5″ wide x 87.75″ long
The 42W bed fits single wheel trucks with a very short bed. It has a 42” cab to axle measurement.56W Dump Flatbed - $11,883 + GST Including Installation
95″ wide x 106.25” long
The 56W bed fits a dually bed truck. It has dual wheels and a 56” cab to axle measurement. This is often called a bed delete truck because it came from the factory with a bed on it.60W Dump Flatbed - $11,883 + GST Including Installation
95.5″ wide x 110” long
The 60W bed fits a true cab and chassis ton truck with dual wheels and it has a 60” cab to axle measurement. This truck comes from the factory with no bed installed.84W Dump Flatbed - $12,504 + GST Including Installation
95.5″ wide x 140″ long
The 85W bed fits dual wheel trucks with an 84” cab to axle measurement.WARRANTY:
C5 Manufacturing has an excellent reputation for quality and workmanship. If you feel a component has not lasted to your expectation, please contact us. These concerns will be handled on a case-by-case basis.
C5 Manufacturing warrants, to the original purchaser, products manufactured by C5 Manufacturing to be free of defects in material and craftsmanship for a period of two years from the date of purchase. There will be NO warranty if the bed is installed by an unauthorized dealer.
Optional items have specific warranties:
• Motor and pump are warranted for a period of one year
• Spinners and headache rack work lights are warranted for 60 days
• The Dew Eze and CW Mills’s pumps are warranted for 120 days
C5 Manufacturing also warrants the purchased parts to be free from defects for the period as set by the parts said manufacturer. If any part, as determined by C5 Manufacturing, is found to be defective, the labor and the part to be replaced or repaired will be borne by C5 Manufacturing.
All shipping and handling are the consumer’s responsibility. For replacement parts, please contact your dealer or the C5 Manufacturing plant in Kingman, Kansas. Warranty for replacement or repair shall not extend the original warranty period. C5 Manufacturing does not warrant against normal wear or damages caused by abuse, negligence, poor maintenance or operation beyond the rated capacities. The warranty card must be completed and returned to C5 Manufacturing within 30 days of purchase.LOCATED: Lacombe, AB
INSTALLED AT LACOMBE, ABFinancing Available OAC!
Please reply to this ad for more information.
-
20
2003 John Deere 9750STS Combine for sale. Has a 2003 John Deere 14 foot pickup header. Features a 20ft unloading auger as well. It has R32 x 18.4 tires on it. It has 3657 engine hours and 2407 thrashing hours.
$70 000 obo.
Please Call only no texts.
Call 1-306-398-2709 or 1-306-398-7474
Located at Curruthers Northwest of Cutknife, Sk.
-
21
Chisholm Trail Bale Bed
Authorized Distributor for C5 Manufacturing.
The Chisholm Trail Bale Bed is a specialty after-market steel bed manufactured to fit pickup trucks, aiding farmers and ranchers in the feeding process of livestock and the transport of large rounds of hay.
The Chisholm Trail Bale Bed is considered by many to be the ultimate bale bed because of its feature-rich design, ruggedly built components, ease of operation and competitive pricing.STANDARD FEATURES:
• Electric-over-hydraulic heavy duty 4 gpm power unit
• Spinners for unrolling round bales
• LED work lights in the headache rack
• Tethered hand control
• Additional set of stop/turn lights in the headache rack
• Heavy duty 2” x 4” x 3/16” rounded bent tube headache rack with louvers for stylish good looks and the ultimate in safety
• 2-5/16”, 30,000-pound rated hitch ball with 1” rise, recessed in the bed with door closure
• H-frame stabilizer system
• 1/8” Tread plate floor with component access doors. Access door for all working components under the bed including fluid fill door.
• Mud flaps
• LED lighting
• 3x20 lift cylinders, two for bale arms
• Two 2x6 squeeze cylinders
• 350 Amp fuse and fuse block system
• Grab handles on each side of the headache rack
• Two-part urethane paint and primer for more durability and shine
• Bolt on receiver hitchSAFETY FEATURES:
• Easy access to mechanical parts through large access doors
• Safety stand 2’ x 1-1/2 x 1-1/2 x 11-gauge steel
• Highly visible warning and caution decals
• 350 Amp fuse and block attached to truck frame
• Heavy duty bent tube headache rack
• Heavy duty 2-5/16th 30,000-pound rated hitch ball 1” rise
• 28’ Tethered hand held control pendant
• Well-built all steel construction
• Grab handles on either side of the headache rack
• D-ring tie downsOPTIONAL FEATURES:
• Underbody Tool Boxes
• Remote Hydraulic Connections
• Power Beyond Connections
• Wireless Remote
• Power Beyond
• Remote CouplersArm Lift Capacity
The Chisholm Trail Bale Bed’s arm lift capacity is 2,850 pounds.Independent Arm Action
The Chisholm Trail Bale Bed uses two squeeze cylinders rather than a phasing cylinder for better squeeze and maneuverability. You can move the arms separately or in tandem for easier bale retrieval when stacked end-to-end. This also helps loading into a ring feeder, even if you do not have a straight shot. Lift any size or shape effortlessly— round, square, wide or narrow. You can haul up to four 4’ rounds side-by-side with a dual wheel pickup. You can also squeeze a large 4’ by 8’ square bale end-to-end or from the side. The arm range on dual wheel trucks of 3’6″ to 9’6″ enables you to grab small or misshapen items as well.Free-Float Arm System
The free-float arm system allows you to unroll hay while maintaining full contact with the ground over rough terrain. This function helps to prevent skips and thick blankets of hay, allowing even distribution of feed and reducing waste.Locking Valve System
Our unique locking valve stops arms from creeping out when carrying hay bales. Additionally, unlike other units on the market, our design significantly limits truck frame stress.
SIZES
The Chisholm Trail Bale Bed is available in six different sizes:SINGLE REAR WHEEL TRUCKS PRICING $$$
37N Dump Flatbed - $16,852 + GST Including Installation
7’ wide x 7’4” long
The 37N bed fits single wheel trucks with a very short bed. It has a 37.5” cab to axle measurement.42N Bale Bed - $16,852 + GST Including Installation
7′ wide x 7’8″ long
The 42N bed fits single wheel trucks with a short six-foot bed. It has a 42″ cab to axle measurement.56N Bale Bed - $16,987 + GST Including Installation
7′ wide x 8’10” long
The 56N bed fits single wheel trucks with a standard eight-foot bed. It has a 56″ cab to axle measurement.60N Bale Bed - $17,135.50 + GST Including Installation
7′ wide x 9’10” long
The 60N bed fits a true cab and chassis ton truck with single wheels and a 60″ cab to axle measurement.DUAL REAR WHEEL TRUCKS PRICING $$$
37w Dump Flatbed - $16,987 + GST Including Installation
8’ wide x 7’4” long
The 37w bed fits dual wheel trucks with a very short bed. It has a 37.5” cab to axle measurement.42w Bale Bed - $16,987 + GST Including Installation
8′ wide x 7’8″ long
The 42W bed fits dual wheel trucks with a short six-foot bed. It has a 42″ cab to axle measurement.56W Bale Bed - $16,987 + GST Including Installation
8′ wide x 8’10” long
The 56W bed fits a dually bed truck. It has dual wheels and a 56″ cab to axle measurement. This is often called a bed delete truck. It has a bent (dog leg) frame as opposed to a straight cab and chassis frame.60W Bale Bed - $17,135.50 + GST Including Installation
7’8″ wide x 9’10” long
The 60W bed fits a true cab and chassis ton truck with dual wheels and it has a 60″ cab to axle measurement. This truck comes from the factory without a bed. It has a straight frame.84W Bale Bed - $18,094 + GST Including Installation
8′ wide x 11’10” long
The 84W bed fits dual wheel trucks with 84″ cab to axle measurement.WARRANTY
C5 Manufacturing has an excellent reputation for quality and workmanship. If you feel a component has not lasted to your expectation, please contact us. These concerns will be handled on a case-by-case basis.
C5 Manufacturing warrants, to the original purchaser, products manufactured by C5 Manufacturing to be free of defects in material and craftsmanship for a period of two years from the date of purchase. There will be NO warranty if the bed is installed by an unauthorized dealer.Optional items have specific warranties:
• Motor and pump are warranted for a period of one year
• Spinners and headache rack work lights are warranted for 60 days
• The Dew Eze and CW Mills’s pumps are warranted for 120 days
C5 Manufacturing also warrants the purchased parts to be free from defects for the period as set by the parts said manufacturer. If any part, as determined by C5 Manufacturing, is found to be defective, the labor and the part to be replaced or repaired will be borne by C5 Manufacturing.
All shipping and handling are the consumer’s responsibility. For replacement parts, please contact your dealer or the C5 Manufacturing plant in Kingman, Kansas. Warranty for replacement or repair shall not extend the original warranty period. C5 Manufacturing does not warrant against normal wear or damages caused by abuse, negligence, poor maintenance or operation beyond the rated capacities. The warranty card must be completed and returned to C5 Manufacturing within 30 days of purchase.LOCATED: Red Deer, AB
INSTALLED AT LACOMBE, ABFINANCING AVAILABLE OAC!
Please reply to this ad for more information.
-
22
Besler Bale Beds 3000 Series Flatbed Bale Loader
DESCRIPTION
With over 35 Years of Bale Loader manufacturing experience, Besler Industries Inc. builds a heavy-duty loader for your demanding use. Combines the convenience and comfort of a pickup cab with the ability to haul 2 bales of up 2,200 lbs. each. The synchronized squeeze arms centre the bale on the bed. Rack feed bales or unroll bales for pasture feeding all from inside the cab with fingertip control.FEATURES AND OPTIONS
BESLER FEATURES:
• Free floating arms provide a smooth ride for lopsided or frozen bales.
• Choose between 12 volt electric over hydraulic or live hydraulic power
• Advanced pivot arm design won’t build up with wet hay or freeze in the winter
• Provides controlled feeding: unroll only what you need
• Available in lengths ranging from 90″ to 147″.
• Drop bales into the feeder without leaving the cab – great for winter feedingSTANDARD EQUIPMENT:
• Dual lift cylinders
• Constructed with 11 gauge deck plate and 6″ stringer
• Tie down rails with stake pockets
• Removable side boards
• Synchronized squeeze arms
• Lights in the headache rack
• Louvered sun visor
• Spinners
• 30,000 lb recessed 5th wheel ball
• Receiver hitch
Optional Equipment
• Extendable Arms
• Wireless Remote Control
• Valve sections to run accessories
• LED lights
• Cross bed tool box
• Under bed tool boxes
• 21″ spinners (15″ spinners are standard)PRICING
SINGLE REAR WHEEL TRUCKS BALE BEDSModel 3000
Width: 85”
Length: 91”
Cab to Axle: 38”
Rear Wheels: Single
Standard With Fenders: No
Weight: 1780 lbs.
*Includes Electric/Hydraulic PumpPrice Including Shipping and Installation: $17,687.52 + GST
Model 3050
Width: 85”
Length:95”
Cab to Axle: 40-42”
Rear Wheels: Single
Standard With Fenders: No
Weight: 1800 lbs.
*Includes Electric/Hydraulic PumpPrice Including Shipping and Installation: $17,687.52 + GST
Model 3100
Width: 85”
Length: 99”
Cab to Axle: 56”
Rear Wheels: Single
Standard With Fenders: No
Weight: 1900 lbs.
*Includes Electric/Hydraulic PumpPrice Including Shipping and Installation: $17,806.59 + GST
Model 3125
Width: 85”
Length: 112”
Cab to Axle: 56”
Rear Wheels: Single
Standard With Fenders: No
Weight: 1900 lbs.
*Includes Electric/Hydraulic PumpPrice Including Shipping and Installation: $17,806.59 + GST
Model 3150
Width: 85”
Length: 117”
Cab to Axle: 60”
Rear Wheels: Single
Standard With Fenders: No
Weight: 1890 lbs.
*Includes Electric/Hydraulic PumpPrice Including Shipping and Installation: $17,972.91 + GST
Model 3175
Width: 85”
Length: 121”
Cab to Axle: 60”
Rear Wheels: Single
Standard With Fenders: No
Weight: 1910 lbs.
*Includes Electric/Hydraulic PumpPrice Including Shipping and Installation: $18,165.69 + GST
DUAL REAR WHEEL TRUCKS BALE BEDS
Model 3238
Width: 95”
Length: 91”
Cab to Axle: 38”
Rear Wheels: Dual
Standard With Fenders: Yes
Weight: 1900 lbs.
*Includes Electric/Hydraulic PumpPrice Including Shipping and Installation: $18,658.03 + GST
Model 3242
Width: 95”
Length: 95”
Cab to Axle: 40-42”
Rear Wheels: Dual
Standard With Fenders: Yes
Weight: 1900 lbs.
*Includes Electric/Hydraulic PumpPrice Including Shipping and Installation: $18,658.03 + GST
Model 3225
Width: 95”
Length: 112”
Cab to Axle: 56”
Rear Wheels: Dual
Standard With Fenders: Yes
Weight: 1980 lbs.
*Includes Electric/Hydraulic PumpPrice Including Shipping and Installation: $18,658.03 + GST
Model 3350
Width: 95”
Length: 117”
Cab to Axle: 60”
Rear Wheels: Dual
Standard With Fenders: Yes
Weight: 1990 lbs.
*Includes Electric/Hydraulic PumpPrice Including Shipping and Installation: $18,848.92 + GST
Model 3375
Width: 95”
Length: 121”
Cab to Axle: 61”
Rear Wheels: Dual
Standard With Fenders: Yes
Weight: 2050 lbs.
*Includes Electric/Hydraulic PumpPrice Including Shipping and Installation: $19,042.65 + GST
Model 3550
Width: 95”
Length: 141”
Cab to Axle: 84”
Rear Wheels: Dual
Standard With Fenders: Yes
Weight: 2130 lbs.
*Includes Electric/Hydraulic PumpPrice Including Shipping and Installation: $19,420.65 + GST
Model 3575
Width: 95”
Length: 147”
Cab to Axle: 84”
Rear Wheels: Dual
Standard With Fenders: Yes
Weight: 2190 lbs.
*Includes Electric/Hydraulic PumpPrice Including Shipping and Installation: $19,611.54 + GST
OPTIONAL EQUIPMENT
- Extendable Arms - $3250.00
- Wireless Remote Control (Panther Radio System) - $938.25
- Underneath the bed toolboxes – Prices Below
- Tool Box (12” Deep, 15” Tall, 14 ½” Long) 40 lbs. - $573.75
- Tool Box (12” Deep, 15” Tall, 18” Long) 43 lbs. - $573.75
- Tool Box (12” Deep, 15” Tall, 27” Long) 57 lbs. - $573.75
- Tool Box (12” Deep, 15” Tall, 18” Long) Tapered - $587.25
- Tool Box (12” Deep, 15” Tall, 27” Long) Tapered - $587.25
- Cross Bed Toolbox (6’ long, 20” wide, 12” to 6” taper) - $1032.75
- Elec/Hyd Power Unit Kit (1.5 GPM)/3000 - $4097.25
- Elec/Hyd Power Unit/ 2000 (wt.130 lb.) - $3831.30
- Kit: Pan/Tank, Valve, Control Cord - $3078.00
- Hydraulic Pump Kit: 7 GPM W/Mount Kit - $3564.00
- Hydraulic Pump Kit: 12 GPM W/Mount Kit - $4006.80*** Two Year Limited Warranty.
*** Installation is estimated to take 8-16 Hrs. on Average. Varies on Model and Brand of Vehicle.
Quality Built Products Since 1973.
LOCATED: Lacombe, AB
INSTALL COMPLETED AT LACOMBE, ABPlease reply to this ad for more information.
-
23
YOUR COMPLETE ATTACHMENT SPECIALISTS: BIGFOOT Enterprises - Spruce Grove, Ab.
WINTER CLEARANCE ON STOCK SNOW BUCKETS
Once Stock Units Gone, Re-orders Will Be At Current Pricing
96" HLA Laser Cut Back Snow Buckets {2-Left} - $ 2,375.00
84" HLA Laser Cut Back Snow Buckets {2-Left} - $ 2,115.00
84" HLA Solid Back Snow Bucket {1-Left}- $ 1,850.00
84" Martatch Laser Cut Back Snow Buckets {2-Left - $ 2,100.00
All Include 8" Wide Reversible Bolt On Cutting Edge
GST ExtraCALL DANNY: 780-695-0116 or RANDY: 780-288-3668
Universal SkidSteer Mount Fits All The Current Skid Steers:
Bobcat, Case, CAT, John Deere, New Holland, Gehl, Mustang, Volvo, JCB, KubotaBIGFOOT Enterprises - YOUR COMPLETE ATTACHMENT SPECIALISTS
Spruce Grove, Ab.
http://www.bigfootenterprises.caAll Our NEW Attachments Are Built By Quality Canadian And U.S. Manufacturers And Covered By Full Manufacturer's Warranty
BIGFOOT Enterprises Has Been Specializing In Attachments, Nothing Else, For Skid Steer, Wheel Loader & Excavator Equipment Since 2006. With Over 20 Cdn & US Manufacturers, We Cover All Your Attachment Needs.
Call or Email Us Today.
-
24
Like new 2019 Volvo VNR 64T640, loaded with adaptive cruise control and collision avoidance braking, and $17,000 worth of extra warranty.
Only 125,000 km , autolube $135,000
Text Ken @ 780 205 0121 for more info and spec sheet
Financing Available through Clearwater Leasing Ltd
Contact Corey 780-870-4443
cwinsor@clearwaterleasing.ca
All Financing is ON APPROVED CREDIT
-
25
Wanted a older D6 or D7 cat or Allis or Komatsu crawler dozer call or text 840-639-0491
-
26
FARM EQUIPMENT HAULING
DRILL TOWING
OILFIELD WINCHING/SHACK HAULING/
WINCHING OF BROKE DOWN EQUIPMENT ECTGit-r-done trucking is a small family owned trucking company providing hands on owner operator (experienced) equipment hauling services in the Lloydminster (Islay) Ab area .
We fix n maintain all our own equipment so we are Mechanically inclined. Able to boost and trouble shoot most small problems to get your equipment running and loaded without needing any assistance . We serve Alberta and Saskatchewan and can go further if need be. We carry 900,000$ cargo insurance. As owner operators with over 20 years experience in the industry our goal is ...
-CUSTOMER SERVICE
-ON TIME DELIVERY
-TREATING YOUR EQUIPMENT LIKE ITS OURS
-MOST IMPORTANTLY , BEING FRIENDLY AND COOPERATIVE WITH OUR CUSTOMERS AND GOING THE EXTRA MILE TO KEEP EM HAPPY
Some of our equipment we carry are:
A TRI AXLE DOUBLE DROP HYDRAULIC NECK AG TRAILER WITH PULLOUTS TO 15 FEET WIDE
A TRI DRIVE WINCH TRUCK EQUIPPED WITH A 30 TON WINCH AND TOW HITCH AND SELF CONTAINED HYDRAULICS AND A WEIGHT DECK FOR TOWING AIR SEEDERS AND BEING ABLE TO RAISE SHANKS ETC...
A TRI AXLE SCISSOR NECK TRAILER WITH A FLIP BEAVER TAIL AND POP UP ROLLERS FOR WINCHING DEAD EQUIPMENT/DRAGGING SHACKS ON AND HAULING OILFIELD EQUIPMENT ON ECT..
A 16 WHEELER HEAVY EQUIPMENT SINGLE DROP BEAVER TAIL TRAILER AND 2 AXLE JEEP USED FOR HEAVY CONSTRUCTION EQUIPMENT HAULING . D8’s /350 TRACK HOES ECT...
A PILOT TRUCK EQUIPPED WITH A 2 WAY RADIO COMMUNICATION TO WARN TRUCKER OF ONCOMING HAZARDS. TOOLS FOR MINOR ROAD SIDE REPAIRS LIKE TIRE CHANGES ON AIR DRILLS ECT...
A BIG SHOP YARD TO STORE OUR REPEAT CUSTOMERS EQUIPMENT WHEN NEED BE .
Feel free to call or text me for a quote and remember cheaper isn’t always the answer... Your quote may be slightly cheaper down the road but One cold start from an Unexperienced trucker could cost you an Engine or a major repair down the road .
Like us on Facebook
https://www.facebook.com/equipmenthauling/
When asking for a quote. If the technology is available , Texting or emailing with brief details work best.
Example
Make -model- dimensions- weight if available (from and to destination )for proper quoting .
Do not use the kijiji add please.
Call Stephan 7806770159
Text or Email
gitrdone228@gmail.com
Thank you :)
-
27
Save your self a few hundred bucks and save the gst also. This is a good used com3 with new style adapter cord. Works on all cat equipment and trucks old to new. They sell new for $1400 plus gst
This one is a cash sale
Message for more details. Fast professional shipping also available
KJR diesel Ltd
-
28
Bale processor for sale. Tires are good, chute is good, bearings are tight, floor is thin. Picked up a new one to cut feed finer.
Lots of life left for the smaller ranch.
-
29
Attachment World Inc.
2001 Peterbilt 379 Tandem Axle Dump Truck for sale!
- Caterpillar C15 3406 Turbo Diesel Engine! Pre Emissions!
- 1,419,863 Kms
- 18 Speed Transmission
- HD Suspsension
- HD Front Axle
- 385/65R22.5 Front Tires
- 11R24.5 Rear Tires
- PTO / Hydraulic Dump Box
- Wet Kit for Pup
- Electric Gravel Tarp
- Herd Bumper
- Webasto Engine Heater
- Positive Air Shut Off
- LED Headlights
- Twin Beacons
- Current Safety
This truck is in excellent condition! Meticulously maintained! Ready to work! $69,500 Call Jordan anytime 403-627-9300. Pincher Creek, AB.
KIT REF ID: 25236720
-
30
We custom build all size excavator and skidsteer attachments to fit your lugging we use the best in Steel like AR400 and Cnc HD plasma and laser to cut all parts to the best quality
We build
Excavator =
Wrist/tilt buckets
Chuck blades
Cleanup and digging buckets
Hoe pac’s
Skeleton buckets
Frost buckets
V buckets
Brush rakes
Root rakes
Ripper shanks
Stump rippers
Bolt on top mounts
Blank ears / lugging
Matt grapples
Auger hangers
Excavator to skidsteer adaptors
And much much more
Skidsteer =
Snow pushers
Snow Buckets
Tooth & smooth buckets
Mat grapple
Adapter plates
And much morePlease feel free to message for pricing and availability on any attachments you need
warranty on all new attachment.
We ship Canada wide
We also do package deal pricing
-
31
TNT Attachments
We custom build all size excavator and skidsteer attachments to fit your lugging. Every new attachment is built with high tensile steel in order to have a strong top quality product. Each cut is done with a CNC HD plasma to ensure high quality cuts.
We build
Excavator =
Wrist/tilt buckets
Chuck blades
Cleanup and digging buckets
Hoe pac’s
Skeleton buckets
Frost buckets
V buckets
Brush rakes
Root rakes
Ripper shanks
Stump rippers
Bolt on top mounts
Blank ears / lugging
Matt grapples
Auger hangers
Excavator to skidsteer adaptors
And much much more
Skidsteer =
Snow pushers
Snow Buckets
Tooth & smooth buckets
Mat grapple
Adapter plates
And much morePlease feel free to message for pricing and availability on any attachments you need. Looking to purchase more than one? Let us know we do package deal pricing!
Warranty on all new attachments
We ship Canada wide
-
32
Looking for heated and otherwise offgrade Canola Prompt on Farm pickup and Payment!
Call or txt Darcy for Details 403-894-4394
-
33
New HLA ALO attach four prong bale spear $1499!!
49 IN tine
Designed specifically for carrying 2 round bales
Can carry 2 round bales up to 6' diameter
Frame width 100"
Approximate weight 340 lbs
4000 lbs capacity @ 24” L.C.
Kverneland tines, each side @ 29” spacingContact Dylan at Ireland Farm Equipment (780) 581 5130 authorized HLA attachment dealer.
-
34
Performance tuning for any and all isx and x15 engiens new or old model we program and tune them all. As well as any Cummins , cat , Detroit , dodge , gm , Mercedes and more.
Message for more details or call 17808726627 for more information.
Programming for emissions equipment still intact also. Less regens less fuel used. Less def used. More mpg more torque better horse power curve. Or chose more added Horse power options also ,
All Cummins oem level programming and tooling used.
Also doing diagnostic testing and trouble shooting services. Also have many new , used , and re conditioned parts in stock.
Turbo conversions. Turbo and manifold conversions. Parts sales. Converting Cummins vgt turbos to run as open or pinned turbos to eliminate vgt actuator and driver circuit faults (allows turbo to be still used instead of being throw away just because of stuck actuator or shaft ) .
Let us know how we can help your situation.
-
35
Runs and starts good, nearly new tread on rear tires fresh paint last yr
-
36
1993 High-Line BALEPRO 6000+ bale processor. Good working shape. (780) 581 5130
-
37
Must have full lockers
Send what you got
780-871-1742
-
38
Right Weigh’s E-Z Weigh Exterior Digital Load Scale with dual air inputs will provide accurate and reliable on-ground weight measurement for a dedicated tractor & trailer set which both have a single height control valve air suspension system; or a single axle group with a dual height control valve air suspension system.
.
Check out our other KIJIJI ADS and our website at www.verduyntarps.com.
Call us at 1-888-277-7787.
VERDUYN TARPS
HAMILTON, ONTARIO
SHIPPING IS AVAILABLE ACROSS CANADA
-
39
John deere 590 swather and 9760 parts. John Deere 590 25 ft swather with new wobble box parts, canvases are older. Bought about 10 years ago to swath canola, used for 5 years last great swath. Since upgraded self propelled to 30 ft. Asking $3000. Lastely have pea concaves for John Deere 9760 combine, as well has pto shaft for 630D straight cut header. Had to buy as 630D header shaft was to short, 9760 is now gone and have S680 which is wider body so shorter PTO shaft works. Maybe 25 hours on long shaft. Concaves $1000 and shaft $1500 obo on both.
-
40
Looking for a set of 407 spec super b tankers all years and conditions will be concidered
Contact be by email @ thegreenmileent@gmail.com
Or text me @ 3063073487
-
41
2013 t590 bobcat skid steer
Upgraded tracks
Large snow bucket
Small bucket
Forks
Snow blade
Extra set winter tracksAll maintaince up to date and freshly completed
2500 hrs
-
42
1989 ford f450 gravel truck runs good. It propane. Brand new aggressive rear tires. 4700.00 obo. Tilt box. Manual transmission.
-
43
Call for info and price 15872813799