ATLAS PVL10 - 10,000lbs.

2 POST HOIST

ALI CERTIFIED $5,695.00 + HST

- CLENTEC ATLAS -

- SALES - INSTALLATION - SERVICE - REPAIR -

- ATLAS AUTOMOTIVE EQUIPMENT -

- LONDON - 226-236-7379

- TORONTO - 647 207 2081 -

The Atlas PVL-10 was engineered and built to offer a commercial grade above ground lift to those customers who have "fallen in love" with the Double S column design and asymmetric columns. Tens of thousands of above ground lifts incorporating the Double S column design have been sold worldwide over the past two decades. The Double S column design was so revolutionary, that it was protected by a patent. That patent has now expired.

The Atlas PVL-10 can be installed with the columns positioned either symmetrically or asymmetrically. When the Apex columns are installed in the asymmetrical configuration, there may be some benefit to open car doors. When the Apex columns are installed in the symmetric configuration there is more width between the columns. Please check the specifications page and picture gallery to determine which height setting and column configuration (asymmetrical or symmetrical) would be the best for your application. Both column configurations offer easy vehicle access and superior vehicle lift point support due to the three stage front arm design.

The Atlas PVL-10 features three (3) stage telescoping front arms, double screw rubber/metal adapters with truck height extensions, protective rubber pads mounted to the carriage , rubber column guards, and a price that cannot be matched.

Symmetric Columns And Super Symmetric Arms

The three stage front arms can be configured in the super-symmetric position when the columns are installed in the symmetric configuration. The Atlas PVL-10 super-symmetric arm configuration allows the customer to position the front arms as they are positioned for the Atlas 9OHSC-SS.

Asymmetric Columns and Arms

When the columns are installed in the asymmetric position, the arms will automatically configure into the asymmetric position allowing the 3-stage front arms to “point” toward the rear of the car. (PV-10P asymmetric arm configuration). If the columns are installed in this asymmetric position, then the front arms cannot be moved into a parallel or symmetric configuration.

Double Screw Up Adapters

Adjustable double screw lift pads are included with the Atlas PVL-10 Plus. Screw up adapters allow the operator to “precisely position” the lift pad in direct contact with the vehicle’s lifting points.

FEATURES;

ALI Certified Lift

10,0000 lb. Capacity

Column design with special Double “S” bends increasing column strength

Can be installed Symmetrically OR Asymmetrically

Overall Height: 135 7/8″ (11′ 3 7/8″) or 139 7/8″ (11′ 7 7/8″) (Cylinder Height 12′ 4″)

Padded Carriages

3-Stage Front Arms & 2-Stage Rear Arms

Single-Point Lock Release

Powder Coat Finish

Includes Double Screw-up Adapters

Free 8 Piece Truck Adapter Set

Mounting Hardware Included

Standard with Premium ALLY Power Unit

Shipping Weight: 1,850 lbs.

5 yr Structural – 2 yr Hydraulic – 2 yr Power Unit Warranty

SPECIFICATIONS:

Capacity 10,000 LB.

Overall Height 135 7/8" (11’ 3 7/8”) or 139 7/8” (11’ 7 7/8”) – (CYLINDER EXTENDS TO 12’ 4”)

Overall Floor Width 139" (11’ 7”) Asymmetric/137 1/2” (11’ 5 1/2”) Symmetric

Outside Column to Outside Column 130" (10’ 10") Asymmetric/129 1/4” (10’ 9 1/4") Symmetric

Maximum Lift Height (Without Adapters) 72 1/2"

Maximum Lift Height (With Adapters) 81 1/2"

Minimum Arm Height 4"

Inside Column 107 3/4” (8’ 11 3/4”) Asymmetric/ 112 1/2" (9’ 4 1/2") Symmetric

Drive Thru 91” Asymmetric/99 1/2” Symmetric

Column Size 7" x 10 1/4"

Column Thickness of Steel 6mm

Base Of Lift 15" x 18"

Motor/Electrical Requirement 220 volt single (1) phase.

A 30 amp breaker is recommended

Oil Requirement 3-5 Gallons AW32/AW46 (NOT INCLUDED)

Shipping Weight 1,850 LBS.

Adapter Heights 4 Each 3”, 6”

Arm Hole/Adapter Peg Size 2”

Requires a minimum of 4" of concrete with 3000 psi.

All lifts come with a step by step instruction manual.

$5,695.00 + HST

DELIVERY / INSTALLATION AVAILABLE

- CLENTEC ATLAS -

- SALES - INSTALLATION - SERVICE - REPAIR -

- ATLAS AUTOMOTIVE EQUIPMENT -

- LONDON - 226-2367379

- TORONTO - 647 207 2081

$ 5695 In stock 2024-09-25 https://ohmy.ca/london-ontario/cars-vehicles/other/atlas-pvl10-2-post-hoist-10-000lb-clentec_1705296.html

5/ 5customer reviews