gofanco HDbitT 4K HDMI Over IP CAT5e/6 Extender - 395ft (120m)
Description
gofanco® HDMI CAT5e/6 Extender 4K – 120m extends HDMI audio/video signals over one cost effective CAT5e/6 cable, while maintaining signal strength and superior audio/video quality. HDMI signal transmission can be delivered directly with 1-to-1 connection or with existing network Gigabit routers or switches. With HDBitT® transport protocol, you can connect up to 30 Receivers per Transmitter to not only extend but split HDMI signals to multiple displays.
OVER LAN DISTRIBUTION with MULTIPLE DISPLAYS: Direct 1-to-1 connection or 1-to-multiple through unmanaged Gigabit network routers or switches. You can connect up to 30 Receivers per Transmitter to not only extend but split HDMI signals to multiple displays. Additional Receivers (HDbitT4K-RX) are sold separately
395FT HDMI EXTENSION with EXISTING network setup: With a single Cat6/6a/7 cable, you can easily extend HDMI audio/video signals for up to 395ft. Connect your HDMI source device to the Transmitter, utilize existing Ethernet structure in your house/office to connect the transmitter to Receiver, then connect your HDTV from a remote location to the Receiver with an HDMI cable. * Unmanaged dedicated Gigabit switches are recommended
HDMI 2.0 VIDEO: Supports up to 4K 60Hz UHD resolution; Auto adjustment for different cable lengths to produce the best video/audio experience. Supports 2-channel Stereo Audio
IR Extension – Control your HDMI source device remotely; With the included IR cables, you can control your source device from a long distance, typically where the HDTV is located
SIMPLE INSTALLATION - No driver required; Sturdy metal enclosure provides durability and minimizes EMI/RFI noise interference. FCC, CE & RoHS compliant. Our products are backed with a 1-year limited warranty and experienced tech support team in Silicon Valley. Contact us at here if you have any questions or concerns
gofanco® HDMI CAT5e/6 Extender 4K – 120m extends HDMI audio/video signals over one cost effective CAT5e/6 cable, while maintaining signal strength and superior audio/video quality. HDMI signal transmission can be delivered directly with 1-to-1 connection or with existing network Gigabit routers or switches. With HDBitT® transport protocol, you can connect up to 30 Receivers per Transmitter to not only extend but split HDMI signals to multiple displays.
Notes:
- A good quality CAT6/6a/7 cable is essential in delivering quality content.
- Network setup with multiple Receivers requires unmanaged Gigabit Ethernet switches for best performance. Dedicated unmanaged Gigabit Ethernet switches are recommended
- This package comes with one Transmitter and one Receiver. For one Transmitter to multiple Receivers setup over the network, 4K Receiver(s) can be purchased separately
Specifications
- Video resolutions: Up to 4K @60Hz
- Audio support: Digital stereo audio
- Transmission range: 4K @60Hz up to 394ft (120m)
- Transport protocol: HDBitT
- HDMI 2.0 and HDCP 2.2 compliant
- Network cable: UTP/STP CAT6/6a/7
- 3.5mm connector: IR Blaster (TX); IR Receiver (RX)
- Housing: Metal
- Power supply: 5V/3A DC
- Power consumption: < 8 watts (TX); < 10 watts (RX)
- Operation temperature: 32 ~ 122° F
- Country of origin: China
- Regulatory approvals: FCC, CE, RoHS
What's in the Package
- HDMI HDBitT CAT6 Extender 4K – 120m Kit (Transmitter & Receiver units)
- IR TX cable
- IR RX cable
- Power adapters (2)
- User’s guide
https://www.gofanco.com/pub/media/files/manuals/hdbitt4k.pdf
- Ad Type: Offering
- For Sale By: Owner
buy and sell | TVs, video | TVs
2023-07-01