Cars & vehicles with in Canada, Nova Scotia.
-
1
2008 Arctic Cat F570. Only 2nd owner since 2012. Electric start and reverse. Mature owner. Only 5800km. New battery and Newer skis with double carbides. New belt not installed and another spare included. Runs great with no issues. Reason for selling, only burned 1/2 tank of gas in 2 years. Comes with a trail pass for this season, full tank of gas. Has papers. No trades. Thanks for looking!
-
2
This is a beautiful Touring machine and very comfortable for two . Take the back seat of and go solo . Lots of power with this 748 cc motor putting out 140 HP . It only has 4800 miles . Snowmobile was completely gone over by a local dealer and has had all the fluids changed and a new pre studded track installed . You won't find a cleaner or nicer touring snowmobile in this price range . I love riding this machine but life is busy and I can never seem to find enough time to enjoy it . Feel free to reach out with any questions or to arrange a viewing .
-
3
Honda Foreman Windsheild
Asking $100
Email or text or call 9027597234
-
4
Looking for KFX 450R parts or a parts bike! Let me know what ya got
-
5
2013 Honda TRX 420. Great fourwheeler starts up with no hesitation runs and drives flawlessly and does not burn oil, bike has been well maintained plastics have a few minor dings and scratches but is still in very good shape and not sun faded. Just over 4000 kms which is barley even broken in for a honda. This model does not have power steering but it is fuel injected with a foot shift and has manual 2 or 4wd option that works perfect.
accessories it comes with is almost new itp mudlights, factory winch, rear seat with heated grips, heated front grips (needs wires reconnected), homemade plow, windshield, and bush gaurd.
All the bike will need is ball joints and tie rod ends as well as some new hand grips. the bike can still be driven as it is but they should be done soon and dont know if i will have the time to change before sale.
Bought the machine as my truck was in for some work during hunting season but would now like to use the money to take care of some other things.
7000$ OBO will consider trades
-
6
Excellent condition
4100km
Rotex 380 Touring
-
7
for sale is a muffler that will fit a 1993 - 2000 honda 300 trx300 4x4 the muffler had the baffle fixed it was welded, but it still runs relatively quiet. $75
Also a front drive shaft with guard in good condition $40 reason for selling is I no longer have the 300
-
8
RSI 7/8” handlebars fit snowmobile, dirt bike, etc.
-
9
2019 Suzuki Z50.
Excellent shape.
-
10
2021 Segway Snarler AT6 SE $6200 TX in. 4500kms. New battery. Fuel Injected. Runs great, lots of power. Power steering, 4X4, Led lighting, 2” hitch receiver
-
11
Low windshield fits Arctic Cat Procross chassis. Colour a little UV faded, otherwise good condition.
-
12
016 ski doo renegade 1200x
9000 miles
Fresh oil change and service ready to ride
7000
-
13
2012 can am commander 800
2022 karavan utility trailer all sides fold down
Package deal
18000
-
14
Have a brand new set of RB 124 carb boots fit skidoo rev chassis with VFORCE 3 reeds
Call or text 19022400341
-
15
Absolutely nothing wrong with it had it for 6yrs fmf pipe lots of aftermarket parts. Selling cause expecting a baby..asking 2000 obo call Ben at (506) 800-9822 tx
-
16
Not sure if i want to get rid of it just seeing whats out there for trades bikes works good smokes a little on start up needs a little love but rideable as is has papers. Needs rear brakes electric start (pull works starts first pull every time) everything else works could use front end tightened up . 9022936843
-
17
DEMO SALE 2022 Excaliber UTV Golf Carts. Lifted Chassis, one Black, One Blue
-
18
2009 arctic cat prowler 650 XT , works perfect . Papers. Nice shape . Newish 28" backwaters,warn winch with rope , tight machine . Turf friendly , push button 4 wheel drive with diff lockers front and rear , Just under 6000km
Also has hitch receivers front and back
Asking 8800 obo
Call or text Jason @9028441976
-
19
Lots of upgrades. Heater, tuner, enclosed all the way around, back up camera, sound system, new maxxis carnivore tires, rims, new brakes, custom made storage compartment with built in cooler, beard racing seats, yoshi exhaust , was just serviced at go powersports. Interested in some trades. Harley or outlander with cash .
-
20
Windshield and wiper for sale from a 2018 Kubota with all mounting hardware, $800. Some trades considered
-
21
Parts for 2010 450 EFI
Call or text Jason @ 9028441976
Xc450
-
22
Looking to sell my 2020 Can-am 570XT. Barely driven only has 1600km on it. Regular oil changes. Looking to get $10,000 with everything included. Hoping for quick sale as need money for powerline college! Open to any reasonable offers.
Includes:
Light bar( not hooked up)
Factory winch
Passenger up seat
Passenger foot rest
Hand guards
-
23
This sled has been the funnest sled I have ever ridden , it has a new, 1.75 track and a new crate engine with only 2000 km on it. Reason for selling I am a senior man with recent surgery and unable to ride
It has green under Glow for night riding and a GGB mountain exhaust. Still has the original exhaust as well.
the machine has  just over 7000 km with only 2000 km on new crate engine, was installed by dealer.
-
24
2020. Excellent condition.
High and low range.
Ready for winter.
New start of season service completed at dealer including new plugs.This is the ultimate do it all big power chassis machine that excells in deep snow, rough terrain and with 850 is fast on trails.
154 X 20 x 1.8" track, low/high gear, fan assit with rad plus liquid cooled engine. It doesn’t overheat.
Use low gear to pull the heaviest of loads or select high gear and be the fastest guy in your group across the lake in a foot of fresh snow! This sled doesn’t get stuck. Very confident sled in all snow
Comes with a really comfortable seat with rear storage compartement.
-
25
For backwoods adventuring or hobby farm chores, this rig is ideal! Low mileage, great condition. Includes front and back windshields, dump body, winch (3500 lb), mirrors, front bumper with gear rack, etc. At this price, it's a great deal: buy a 1000 cc with extras for the price of a basic 700-800 cc. Text for photos and to arrange viewing.
-
26
Selling our 1999 mini Z. Owned for 8 years. Upgraded with speed kit from Recreational Motorsports. Works perfect and is in almost perfect shape. Has sled wrap decals. 2800.00 NO TRADES
-
27
06 Apex, bought new in 08. Has not been out of the garage in 3 years and only driven around the fields for 3 winters before that. Good track and just over 5000 miles. Pic of odometer is from Nov 2023. Needs a battery and I will put one in if someone wants to see it. WILilling to trade for a 4 wheeler of same value.
-
28
$3000 obo , Selling Polaris sportsman with 3000 lb winch
Passenger seat , aggressive tires , heated bars and throttle .
4x4 works great Starts up first flash
New battery , oil change and transmission oil just done .
Comes with 1 oil filter , adult helmet , youth ( toddler helmet ) brand new .
Getting new bike next month and no need for 2
-
29
2021 can am maverick 900 turbo rr fully loaded roof with stereo power windshield can am snow plow winch with h synthetic rope rock sliders front and rear bumpers rear view camera side mirrors turn signal rad relocated 3 point harnesses upgraded wheels and control arms this cost 70,000 to build must see
-
30
Open for trade. Looking to trade my unfinished project. The truck was electric, plan was to put gas over hydraulic drive in it. The truck still needs a little work, lots of work has already been done. Try me for what you have to trade. I am not interested in tire kickers. If you are interested let me know and show me what you have.
-
31
Look no further than APD MOTORSPORTS for all your ATV/UTV maintenance requirements. We have ATV maintenance packages starting as low as $78.95. We can tailor your package to suit your needs, whether you just want an engine oil change or all round fluid change, full check over from bumper to bumper, Just let us know what you require and we can quote you a great price.
We also offer pre purchase inspections if you are thinking of buying an ATV, bike or any other powersports equipment. This will help you to not make that purchase that you might end up regretting.
NO JOB IS TOO SMALL OR TOO BIG, WE DO IT ALL.
Just give us a call with whatever requirements you have and we will do our best to help.HOURS OF OPERATION:
Monday – Friday 9.00am – 5.00pm
Saturday 9.00am - 12.00 NoonAPD MOTORSPORTS
TEL: 902-821-2327
12282 PEGGY’S COVE ROAD
GLEN HAVEN
B3Z2R6
-
32
Halifax Motorsports | HFX Motorsports
FXR X-CROSS PRO ICE BOOTS are in stock and on sale now! These are the boots you need to keep your feet warm and dry all winter long. Don't let the cold temps keep you from riding your favourite trails. These boots are perfect for ice fishing too! Drop in today and let us help you find the perfect fit.
PRICE ONLY $319.99 all taxes in when picked up in store.
- Rated to -45° C with 600g insulation
- HydrX membrane
- Slip-on convenience
- FXR high traction outsole
- Fixed liner with fur lining
- Toe kick - clean snow and ice with ease
- BTO Thermostatic Midsole Insert
- Diamond grid genuine rubber inserts
- Ultimate heel holder design
------------------------------------------------
hfxmotorsports.com | #freeshipping over $99*Halifax Motorsports | HFX Motorsports
818 Prospect Road,
Goodwood NS, B3T 1P3
sales@hfxmotorsports.comText us at: 902-442-4046
p. 902-442-4046 or 1-833-442-4046
-
33
06 Apex, bought new in 08. Has not been out of the garage in 3 years and only driven around the fields for 3 winters before that. Good track and just over 5000 miles. Pic of odometer is from Nov 2023. Needs a battery and I will put one in if someone wants to see it. WILilling to trade for a 4 wheeler of same value.
-
34
BIEK SHOW SPECIAL - SAVE $2000...WAS PRICED AT $38799 NOW $36799ONE OF THE WAYS TO MAKE YOUR ADVENTURES EPIC IS TO HEAD OFF-ROAD WITH YOUR FAMILY AND FRIENDS
2024 Polaris® Ranger XP 1000 NorthStar Edition Ultimate FEND OFF THE ELEMENTSBUILT TO WORK AND PLAY HARD
Rain or shine, there's no stopping you from getting the work done with the RANGER XP 1000 NorthStar Edition.
Features may include:
- COMFORT
Every detail of the refined interior puts the driver and passengers first for unmatched comfort and convenience.
- NORTHSTAR EDITION ULTIMATE FEATURES
Enjoy the ultimate off-road in-cab experience even more by upgrading to the NorthStar Edition Ultimate.
- RIDE COMMAND
Unlock integrated RIDE COMMAND technology in your vehicle's display with the most sophisticated off road GPS navigation system. Communicate, plan ahead and stay connected for a confident start and finish to every adventure.
- RIDE COMMAND+
Having your machine equipped with RIDE COMMAND+ takes all guesswork out of owning it. Check your vehicle’s health, location and maintenance schedule all from the palm of your hand. First three years included with purchase.
- Convenient Power Windows
Enjoy the convenience that comes with power windows on the front doors, featuring a sure-closing, tight sealing 360° gasket seal to the vehicle.
- Control Your Coverage
Close the Pro Shield Full Glass Tip-Out Windshield for protection from the elements or open to experience the breeze and get an open-cab feel.
- CAPABILITY
Whether you’re hauling gear, towing a trailer or transporting people, make quick work of any task with the power of the dual overhead cam (DOHC) engine on RANGER XP 1000 NorthStar Edition.
- Capability Meets Utility
The RANGER XP 1000 NorthStar Edition makes every task easier with thoughtful innovation and toughness.
- STRENGTH
Fend off rocks, stumps, and rough terrain with a vehicle designed to take them on.
Includes
- Factory-Installed Heating & Air Conditioning HVAC System
- Pro Shield Cab System with Manual Crank Window Doors
- 27in. Pro Armor X-Terrain Tires & 14in. Wheels
- Polaris HD 4,500 lb. Winch with Synthetic Rope and Autostop
- 82 HP ProStar Engine
- 13in. Ground Clearance
- 2,500 Lb. Towing Capacity & 1,000 Lb. Box Capacity
- 7in. Display Powered by RIDE COMMAND
- Pro Shield Cab System with Full Glass Tip Out Windshield & Power Windows
- 29in. Pro Armor X-Terrain Tires & 14in. Wheels
- 14in. Ground Clearance
- RIDE COMMAND+ Technology
- RIDE COMMAND+ Technology
- 14in. Ground Clearance
- 29in. Pro Armor X-Terrain Tires & 14in. Wheels
- Pro Shield Cab System with Full Glass Tip Out Windshield & Power Windows
- 7in. Display Powered by RIDE COMMAND
- 2,500 Lb. Towing Capacity & 1,000 Lb. Box Capacity
- 13in. Ground Clearance
- 82 HP ProStar Engine
- Polaris HD 4,500 lb. Winch with Synthetic Rope and Autostop
- 27in. Pro Armor X-Terrain Tires & 14in. Wheels
- Pro Shield Cab System with Manual Crank Window Doors
- Factory-Installed Heating & Air Conditioning HVAC System
- STRENGTH
- Capability Meets Utility
- CAPABILITY
- Control Your Coverage
- Convenient Power Windows
- RIDE COMMAND+
- RIDE COMMAND
- NORTHSTAR EDITION ULTIMATE FEATURES
- COMFORT
-
35
Reluctantly made this ad to see if there is someone out there that appreciates the age and rarity of this machine. I have cherished it since the day I found it for sale.
1992 Suzuki LT 250RN ( Last year for the 2-stroke quadracer!)
- Good shape for the age and intended use of this machine
- Was refreshed in the early 2000's with bearings, bushings, seals, chain and sprockets, engine rebuild, reeds, clutch plates and springs, etc. ( Have all receipts)
- Has New/old stock OEM rear fender decals
- No holes or tears in seat
- "Banshee bend" Renthal Handlebars
- Boysen Reeds
- New Stator and Pulse Pickup assy installed last year.
- New OEM coil installed last year
- Have period correct rear brake disk guard ( not installed)
- Parking brake block off installed
- All brakes work well, just replaced rear brake fluid.
- Cylinder has been ported
- Dome has been milled once at time of engine rebuild.
- Has aftermarket plastic skid plate
- New throttle and clutch cable
- Three tires have slow leaks due to the previous owner having installed studs in the tires for fun on the ice.
- Carb could use some tlc, starts and runs fine but will not idle for long after warmed up due to low speed adjustment screw.
- Since this machine was refreshed in the early 2000's, it really hasn't had much use. Stored indoors.
* Would very much like to trade for a well cared for, not abused 2005-2012 Honda 500 Rubicon with under 8k mileage.. either red or green, with papers, and not modified for mud, no snorkels, nor plowed with.
* At this time, I have not set an asking price. I'm giving this ad some time to attract the trade im looking for. *Txt for quickest response
Thanks for looking
-
36
1986 Honda Fourtrax
Just Message for more information
-
37
WAS $22,399 NOW RALLYE PRICED AT $21,899 SAVE $500 WHEN FINANCED HERE AT A BANK OF YOUR CHOICE!
2024 Kawasaki Teryx4Eager for action, the four-passenger Teryx4 side by side is built to tackle tough trails. With the perfect combination of rugged sport performance and capability, the Teryx4 is made to conquer the outdoors with the entire crew on board. Take adventure to the next level with extra features only found on the Teryx4 S models. For the ultimate package, explore more with the Teryx4 S Special Edition.
Features may include:DURABILITY
- REAL STRENGTH
From the reinforced steel frame to the protective front brush guards, Teryx4 side by sides are built strong inside and out.POWER
- POWERFUL & RESPONSIVE
The four-stroke, fuel-injected, 783cc engine of Teryx4 side by sides work in unison with a Continuously Variable Transmission (CVT) to produce smooth and consistent power over rugged terrain.PERFORMANCE
- BUILT FOR ADVENTURE
Teryx4 side by sides are ready to take on all challenges with strong power, agile handling, and a host of modern features for a capable, exhilarating ride.COMFORT & CONVENIENCE
- EQUIPPED FOR MORE
Conquer the outdoors with thoughtful convenience features that will make your weekend adventures more enjoyable.ADDITIONAL
- Maxxis Bighorn tires
- Double-X steel tube frame
- Additional DC outlet in rear
- Additional DC outlet in rear
- Double-X steel tube frame
- Maxxis Bighorn tires
- EQUIPPED FOR MORE
- BUILT FOR ADVENTURE
- POWERFUL & RESPONSIVE
- REAL STRENGTH
-
38
Selling 2 shocks together bought for Motorhome did not work could not return to company
-
39
I am looking for a mini excavator also open to a larger one as well can pay cash 902-237-9911 thanks
-
40
Freightliner Columbia 2007
13 speed manual
Detroit 60 series engine
Contact 9024032655
-
41
1R 22.5 truck Tires all around 20 percent left on tread price $ 100 call there going fast 506 461 3657
-
42
2 new shocks for a frightliner. Never been mounted part # 16-18708-000 they will fit frightliner cascadea 2008-2021 and frightliner M2 2002-2022. $190 OBO.
-
43
Very good condition John Deere 4045DF150 with rockford 4-11256 (twin disk) clutch power unit.
ONLY 2500hrsShipping available
-
44
Attachments for all makes and models of Excavators
MADE IN CANADA
2 Year WarrantyAttachments Available:
Ditch Cleaning Buckets
HD Tooth Buckets
Twist/Tilt Buckets
Extreme Duty Rock Buckets
Root Rakes
Skeleton Buckets
Hydraulic Thumbs
4 in 1 Buckets
Trapezoidal Buckets
Mechanical Concrete Pulverizers
Chuck Blades
Couplers (Pin Grab, Wedge, Hydraulic or Mechanical)
Screening Buckets
Grapples - Log, Demo, Clam-Shell, Orange Peel
Frost RippersGRITT Equipment Sales
-
45
2016 Cat 320EL with Hydraulic Thumb forestry cage for front window , also plumbed for a mulcher Hours 7760 undercarriage around 70 percent Air condition cab back up camera call Steve anytime 506 461 3657 SD EQUIPMENT LTD EXCAVATOR IS IN FREDERICTON NB ((FINANCE AVAILABLE DELIVERY AVAILABLE ))
-
46
New hydraulic pump
Requires an engine
-
47
THESE ARE TWO OKADA 2020 BUT NOW CONSIDERED 2023 HAMMERS BOTH TOTALLY REBUILT WITH STAGE 2 REBUILD KITS WHICH INCLUDED ALL NEW BUSHINGS - NEW SEAL KIT - NEW PISTONS AND TWO NEW MOIL POINTS RESEALED AT OKADA FACTORY REPAIR SHOP - BOTH WERE LITTLE USED - RESEALING DUE TO SITTING DUE TO COVID - BUT DECIDED TO MAKE THEM BOTH AS NEW c/w 6 MONTHS FULL WARRANTY FROM OKADA NORTH AMERICA STARTING THE DAY YOU RECEIVE THE HAMMER.
2020 Okada ORV7500 Hydraulic Demo Hammer Breaker Chisel Attachment Tool
LOW HOUR 2020 MODEL 7500 FT LB HAMMER USED 1 JOB BEFORE COVID - CURRENTLY FINISHED A COMPLETE REBUILT TO NEW AT OKADA'S OREGAN FACTORY REBUILD FACILITY
HAVING A COMPLETE RESEAL AND NEW NITROGEN CHARGE ALONG WITH NEW FACTORY PISTON AND ALL NEW BUSHINGS AND SEAL KIT COMES WITH 1 NEW OKDA MOIL POINT AND 1 AS NEW OKADA MOIL POINT SO 2 NEW POINTS
WILL BE SHIPPED DIRECTLY FROM OUR LANGLEY BC YARD THERE TO BUYERS YARD - WILL SHIP ON OUR ACCOUNT WE GET FAST SERVICE AND GREAT RATES
TAKE OKADA ORV7500 — MID CLASS HYDRAULIC BREAKER READY TO WORK FOR $60,000.00 CDN
SEE IMAGE 4 FOR A USED ONE FOR SALE THAT IS 2 SERIAL NUMBERS OFF OF OUR FACTORY REBUILT - RESEALED UNIT
AND TAKE THE OKADA TOP150 — 3000 FT-LBS CLASS HYDRAULIC BREAKER FOR $30,000.00
FRANK 604-476-7777
OKADA ORV7500 — MID CLASS HYDRAULIC BREAKER
ORV Series hydraulic breakers for use with skid steer loaders, mini and small excavators and tractor loader backhoes.
AUTO-LUBE
A central grease port with internal grease passage allows you to easily adapt the hammer to most auto lube systems.
MAIN VALVE
The internal control valve system equates to faster speeds and higher impact energy while still allowing the breaker to operate at cooler temperatures.
ACCUMULATOR
The large capacity accumulator reduces shock load in the system.
STROKE ADJUSTER
Variable speed control in the breaker maximizes productivity.
ORIGINAL HOLDING SYSTEM
The powercell is securely held inside the bracket with the head damper, reducing recoil.
LARGER N2 GAS CHAMBER
Ensures high impact power.
LONG STROKE PISTON
Increases impact power and reduces vibration and recoil.
DUAL CHISEL RETAINING PIN
Heavy-duty chisel set pins in many Okada models offer extended service life.
DURABLE BREAKER BRACKET
Includes a heavy-duty bottom plate that protects the powercell and reduces noise and vibration.
Technical Data
IMPACT ENERGY CLASS 7500 ft-lb / 10170 JOULES
OPERATING WEIGHT 5950 lbs / 2698 kg
OIL FLOW 63-72 gpm / 238-272 lpm
FREQUENCY 230-400 bpm L-mode / 270-470 S-mode
OPERATING PRESSURE 2320-2600 psi / 157-180 bar
MECHANICAL ENERGY 98-133 HP / 73.4-99.5 KW
MECHANICAL ENERGY AVG 115.5 HP / 86 KW
UNIT WORKING LENGTH 124 in / 315 cm
TOOL DIAMETER 6.1 in / 155 mm
TOOL WORKING LENGTH 30.2 IN / 767 MM
85DB(A) LEVEL DISTANCE 119-167 ft / 36-51 M
CARRIER WEIGHT RANGE 60-92 lbs. / 27-42 M tonOKADA TOP150 — 3000 FT-LBS CLASS HYDRAULIC BREAKER
Okada’s medium class breakers are available in a wide range of designs, from those specifically engineered to provide maximum impact energy for the toughest rock applications to others suited for a combination of concrete and rock breaking with the potential for faster blow speeds.
Precision machining processes and strict Okada quality control are used to produce all main breaker components. There is no need for complete assembly replacements and the use of high precision parts mean economical, labor-saving rebuilds of your Okada breaker.
Breaker brackets are made of heavy gauge high tensile steel plates and are designed to give maximum protection to the breaker body and dissipate heat while making it easier to access the equipment during daily maintenance inspection.
Okada bushing designs, a special heat treatment process and individually lubricated bushings enhance the service life of wear parts.
Technical Data:
IMPACT ENERGY CLASS 3000 ft-lb / 4068 JOULES
OPERATING WEIGHT 3000 lbs / 1361 kg
OIL FLOW 30-35 gpm / 114-132 lpm
FREQUENCY 600-750 bpm L-mode
OPERATING PRESSURE 2030-2620 psi / 140-180 bar
MECHANICAL ENERGY 42-63 hp / 31-47 kw
MECHANICAL ENERGY AVG 52.5 hp / 39 kw
UNIT WORKING LENGTH 94 in / 239 cm
TOOL DIAMETER 4.8 in / 122 mm
TOOL WORKING LENGTH 24 in / 610 mm
CARRIER WEIGHT RANGE 28-42 lbs. / 13-19 M tonWE ALSO HAVE A $80k NEW OLD STOCK OKADA DEMOLTION PROCESSOR THAT FOR 200-350 CLASS MACHINES - SEE MY OTHER ADS FOR $35,000.00
-
48
FITS 250-500 CLASS EXCAVATORS - $92k REPLACMENT COST
BRAND NEW EXTREME DUTY EXCAVATOR MOUNTED LOGGING 20K CAPACITY GRAPPLE C/W WITH NEW CUSTOM EXTREME DUTY $7500.00 BOLT ON TOP PLATE SYSTEM - THIS IS NOT A WELD ON SYSTEM BUT CUSTOM ONE WAY THREADED BOLT ON SO YOU CAN CHANGE EAR SETS QUICKLY WITH ONLY A MILWAUKEE ELECTRIC IMPACT REQUIRED ON ONE WAY EASY ACCESS BOLTS
TAKE THIS 85,000.00 PLUS COST OF TOP PLATE SYSTEM GRAPPLE FOR $45K JUST LOWERED THE PRICES TO MOVE THIS EQUIPMENT QUICKLY - FRANK 604-476-7777 OR TOLL FREE Phone : 1-(833) 693-9323 ONLY SELLING AS LEAVING BC TO MOVE TO OUR NEW HOME IN NB AFTER 53 YEARS IN DEMOLITION - TRUCKING
MODEL T40HPX-114 2 CUBIC YARD 360 DEGREE ROTATION GRAPPLE 19000 LB CAPACITY - BRAND NEW DEMOLITION OR LOGGING GRAPPLE WITH HPX DRIVE NO HYDRAULIC CYLINDER GRAPPLE
CURRENTLY AT DC WELDING WHO IS INSTALLLED A BRAND NEW BOLT ON TOP PLATE WITH 90MM PINS WITH 12.80 INCHES BETWEEN THE EARS TO PUT ON A PC360LC-10 WITH GEITH PIN GRABBER COUPLER - THAT EXCAVATOR IS NOW SOLD.
WE WERE ALSO GOING TO MOUNT ON OUR LONG REACH PC450LC-8 KOMATUD WITH PIN GRABBER MOUNT BY BUILDING ANOTHER 100 MM BOLT ON TOP PLATE
HAS CONSTANT HI-PRESSURE GRABBING FORCES AND DOES NOT RELEASE PRESSURE UNTIL DONE BY THE OPERATOR
THIS USES A HELIX STYLE DRIVE AND INTERNAL ROTATOR - IT HAS A QUICK CHANGE GRAPPLE SYSTEM TO CHANGE TO MULTIPLE CHOICES FOR DIFFERENT GRAPPLE ARMS FROM LOGGING - DEMOLITION - ETC
BASE GRAPPLE NEW IS OVER $85,000.00 PLUS OVERSEAS SHIPPING - CUSTOMS AND 16 WEEKS OF LEAD TIME
PERFECT FOR UNDERWATER WORK, LOGGING OR DEMOLITION AS NEVER EXPOSE HYDRAULIC CYLINDERS WHEN WORKING
TAKE THIS NEW GRAPPLE TODAY FOR $45,000.00 WITH THE NEW BOLT ON TOP PLATE IN PLACE
ONLY SELLING AS WE ARE RETIRING AND SELLING ALL MY EXCAVATORS AND ATTACHMENTS
JUST LOWERED THE PRICES TO MOVE THIS EQUIPMENT QUICKLY AS RETIRING BACK TO OUR NEW HOME IN NB DUE TO HEALTH ISSUES FROM THE FOREST FIRE SMOKE PARTICULATES AND EXTREME TRAFFIC AND ITS SMOG IN THE FRASER VALLEY AND CLEARING OUT MY YARD TOTALLY
WILL SHIP QUICKLY WE GET GREAT RATES AND SERVICE AND CAN HAVE A TRUCK UNDER IT NEXT BUSINESS DAY
FRANK 604-476-7777
THIS GRAPPLE WILL PIN ON THE FOLLOWING MACHINES DIRECTLY OR ANY PIN GRABBER THAT TAKES 90 MM PINS WITH 12.80 INCHES ACROSS THE BOTTOM MOUNT
Case CX240
Case CX240
Case CX290
Case CX290Komatsu PC240
Komatsu PC240
Komatsu PC250-6
Komatsu PC270
Komatsu PC270LC-6
Komatsu PC270LC-7
Komatsu PC280
Komatsu PC280
Komatsu PC290Link-Belt 240LX
Link-Belt 290LX
Link-Belt 3400 QUANTUM
Link-Belt 3900 QUANTUMALL PARTS AND QUICK CHANGE GRAPPLE SHELLS (ARMS) ARE AVAILABLE FROM:
KINSHOFER Canada
5040 Mainway Drive, Unit #11
Burlington, ON, L7L 7G5
Tel.: +1 (905) 335 2856
Fax: +1 (905) 335 4529
Toll Free (North America): 1 (800) 268 9525
Email: sales-northamerica@kinshofer.comKINSHOFER GmbH is a leading manufacturer of attachments for truck cranes and excavators for the most important industries worldwide.
From our headquarters in Holzkirchen, Bavaria, we offer our customers an extensive range of attachments for equipment carriers with or without hydraulics for scrap, demolition, track construction, landscaping, general construction, snow clearing, excavation, road construction, forestry, recycling, etc.
The continuing demand for transportation and infrastructure is constantly driving our product development and the service we offer. As a result, we are continuously expanding our product range in order to develop and produce technical highlights in the industries.
The cylinderless and low-maintenance technologies that are used for the HPXdrive on grapples or the NOX tiltrotators and TC tilt couplers are examples of these innovations, as are the products for special requirements or unusual uses from our special solutions department.
With high quality, variety and the latest technology, KINSHOFER crane and excavator attachments set standards worldwide.
Technologies - HPXdrive Excavator
Functional exchange, depending on demands!
During times of growing costs and environmental awareness, efficient working is getting more and more important.
The HPXdrive stands out thanks to its extended lifetime compared to a conventional cylinder-driven grab.Compared to conventional cylinder grabs, the closing force of the HPXdrive is high and constant during the entire operation.
The movement of the arms is generated by two hollow shafts, which run opposd and have a helix thread, hydraulically driven by a single piston.
The resulting closing force is always the same no matter the position of the shellsThanks to the shell exchange system you are able to clearly lower the investment costs for your fleet.
Just change fast and easy to the suitable shell option depending on the task.
The reliable shell exchange system features an easy loosening of the shells in case of exchange and a safe and steady holding of loads during every task.
Setup times can be reduced to a minimum.
The flexibility of your work processes as well as your competitive abilities can be increased.
-
49
HINO 185
Good cab, motor and transmission
Hiab crane
Runs good
Requires brakes (rusty and sticky)
Idea for farm, automatic and crane would be very useful
Crane can be sold separate
-
50
For sale a new Rockwell automatic slack adjuster part # R80 1073 asking $100.00 phone 902 860 1224