Cars & vehicles with in Canada, Nova Scotia.
-
1
Ride available on request in Halifax to anywhere on Saturday and Sunday . AirPort , Truro and near areas. Call or message 2044038272
-
2
They are in stock and we ship Canada wide, Grand Prix Import has been selling Quality Automotive Equipment since 1977 in the Canadian market .Tel: 1-800-361-4095 The MONDIAL MR-06 is a 6,000-lb. portable lift with a 52" lifting height(60" with truck adapters) that comes loaded with adjustable arm assemblies, a safety lock bar with multiple lock positions and a free set of truck adapters. This MR-06 is a mighty 6,000-lb. capable mid-rise scissor lift thats designed to fit nicely into narrower bays and wont take up your precious floor space. The mid-rise lift is absolutely perfect for detailing vehicles, wheel service, brake work, as well as an ideal lifting solution for DIY enthusiasts and hobbyists who enjoy taking care of cars in their home garage.
Lifting Capacity 6,000 lb
Power Unit 110V
Length 102"
Width 40"
Min Height 5.5"
Max Height 60" with truck adapters
Warranty is 1 year on parts and 5 years on the structure.
National Shipping Available Can be picked up at the local terminal, Delivery fee's apply please contact us for details .at 1-800-361-4095
See my other ads !!!!!!We have all spare parts in stock
1 year warranty on parts and 5 years on structure.
For more information contact us Tel:1-800-361-4095
Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
3
They are in stock and we ship Canada wide, 1-800-361-4095 Grand Prix Import has been selling Quality Automotive Equipment since 1977 in the Canadian market .GP-10 is one of the most affordable floor plate car lifts built with quality materials and good workmanship. The lift has a strong double "S" column design to support 10000 Lbs capacity. Its an asymmetric lift with a Double cylinder, Steel pulleys and equalizing cable system. motor / pump 3 hp - 220 volts.
Combo (Symmetrical and Asymmetrical) Arm Assembly
Straight Front/Rear 3 Stage reach from 22 7/8" to 42 5/8"
Straight Rear 2 Stage reach from 33 5/8" to 52 7/8"
Screw-in pads 4 pieces included
Truck adapters 4 pieces included
Double point safety lock release
Automatic arm lock restraints
Relief valve built in power pump to prevent overloading
Door guards protection rubber
Up-limit switch to protect cylinders working stroke used in safe length scope
Heavy duty 3/8" diameter cable and 5" pulley that reduce high stress on synchronization process and increase cable life
Ultra high molecular self lubricating nylon slider that ensures carriage smooth moving up and down
Lifting operation by pressing "UP" button on motor
Manual lowering operation by pressing lever
Relief valve built in power pump to prevent overloading
Overall Height: 143 3/16"
Overall Width: 134 5/16"
Maximum Lift height with Truck Adapters: 81"
Maximum Lift height without Truck Adapters: 75"
Minimum Height of Arm Top: 4"
Carriage to Carriage Width (Drive through clearance): 100"
Column to Column Width: 109"
Column Cross Section: 11"L x 7"W
Driving Mode: Dual hydraulic cylinders, chain drive
Motor: 220V Single Phase 3HP 10A (recommend a 30A breaker)
Hydraulic Oil: 3-5 gallons AW32/AW46
Lifting Capacity: 10,000 LB
Time to full rise: 50 sec
Concrete Requirement: 5" thick at 3500 psi reinforced with fiberglass or steel (
Anchor bolts/mounting hardware included
Tool trays and toe guards included- Warranty is 1 year on parts and 5 years on the structure.
-Transport service and delivery available across Canada
See my other ads !!!!!!1 year warranty on parts and 5 years on structure.
For more information contact us Tel:1-800-361-4095
Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
4
Semi Automatic tire changer TC-325 TEL: 1-800-361-4095 **** Tire Machine MONDIAL TC-325 with bead blaster and internal air tank Swing arm Tire changer • It allows to remove and install tires up to 24 "in wheel diameter • Plastic inserts are provided to protect the alloy wheels.
TC-325 Specifications
Rim clamping outside 10"-22"
Rim clamping inside 12"-24"
Motor: 2HP, 15 AMPS, 120V/60Hz
Maximum Tire Diameter 41"
Wheel width:3’’-15"
Operating pressure 115-145 psi- One year warranty on parts. We have all spare parts in stock. -Transport service and delivery available across Canada
-4 post parking lifts available Other garage equipment available.
For more information contact us Tel: 1-800-361-4095 Address 8275 17th Avenue MONTREAL, QC H1Z4J9
-
5
plowing / shoveling for upcoming season reserve your spot today call text 9024415082
-
6
We offer tree clean up and stump removal please call or text 9024415082
-
7
IMEX Pontoon Boat Kits start at $15,990.
For example :2023 IMEX 1975 Typ5 kit
☆ Pre-assembled 2x 19ft / 25 inch aluminium pontoons / 7.6ft framing
☆ Pre-assembled WPC floor and vinyl flooring
☆ Full Railing / Gates - FREE color option for pre-order
☆ Underfloor protection with aluminum sheets
☆ 1 Motor support
☆ 1 Fiberglass Helmet with switch panel and mp3
☆ Manual Steering
☆ Captain Fashion Chair
☆ Deluxe Lounge seats - FREE color option for pre-order
☆ 1 Bimini
☆ 1 Table
☆ 1 Ladder
☆ LED light kit
☆ Speakers
☆ Accessories$25,490 + tax, Nackawic NB (Dealer MSRP $35,900)
Everything is bolted, no welding or special tools required.
Options:
☆ Full assembled boat - We can assemble it for you (Fall to Spring)
☆ Center Pontoon
☆ Lifting strakes
☆ Integrate gas tank 50 L
☆ Double Bimini
☆ Hydraulic steering
☆ Saltwater kit
☆ ChangingroomIMEX kit assembling
What you have to install ?
Our standard kit comes with pre-assembled pontoons, frame and floor (vinyl).
You only have to install and save $1,000s :
- Seats, where you want
- Helmet, where you want
- Table, where you want
- Lights
- Motor mount
- Binimi
- Doors
- WiringNo special tools requiert.
Warehouse pickup in Nackawic NB. No shipping..... but we can load everything on the truck you send.
-
8
excavation services we offer the following:
1. Site Preparation:
2. Utility Trenching: Expertly dig trenches for water, gas, electrical, sign bases, and other utility lines.
3. Grading and levelling
4. Small Scale Land Clearing:
5. Foundation Excavation:
6. Drainage Solutions:
7. Road and Driveway construction and repair
9. Small Demolition Services:
For a quote please text 9024415082
-
9
9” Nicro marine snatch blocks for sale. Large 3” sheave and in great shape
-
10
In stock with a Suzuki 115 and trailer included
The Coastal-Vokey 198 CC (Centre Console) fiberglass boat is a perennial best selling model at Shore Cycle Marine. Thanks to a deep V-Hull with flared bow, you'll appreciate the easy, smooth, and dry ride. This boat offers a new fully moulded centre console and interior, grab rail, windshield and 55 gallon fuel tank. Wood-free construction and unsinkable at maximum capacities.
?Overall length is 19'10" X 8' wide.
This Coastal-Vokey 198 CC is equipped with hydraulic steering, T-Top, Black Hull Colour /White Trim and Porta-Pottie. Ask our Sales Team to help determine which electronics package is best for you. The selling price does not include electronics on this boat.
Recommended Maximum Capacities - 6 persons or 450 kgs, 900 kgs includes persons, motor, & gear.
This is a fiberglass boat package that includes the Coastal-Vokey 198 CC with above noted features, galvanized Easy Hauler trailer and Suzuki 115 HP outboard motor.
Let’s get you on the water! Competitive financing options available at Shore Cycle Marine, Mahone Bay NS
**Images are meant to be a representation and may not be completely accurate or up to date. Please connect with the Sales Team at Shore Cycle Marine for all of the information.
-
11
For Sale 22 foot Cape Boat, everything with less than 70 hours on it. This boat needs nothing. Price $38,000 (Thirty Eight Thousand Dollars CAD)
The boat has been cleaned and winterized and put in storage. Will store until spring for buyer.
Please call Frank at 902-677-2986
-
12
One Holt Allen aluminum mainsheet block from a pram and two unknown make of non- metallic pulley blocks of fibre reinforced resin that used to be very popular.
Call or text Dan at 902 277 2540 to arrange to see them in Chester Basin or I can bring them to you anywhere between metro Halifax and Bridgewater area.
-
13
In stock with a Yamaha 115 and trailer included
The Coastal-Vokey 198 CC (Centre Console) fiberglass boat is a perennial best selling model at Shore Cycle Marine. Thanks to a deep V-Hull with flared bow, you'll appreciate the easy, smooth, and dry ride. This boat offers a new fully moulded centre console and interior, grab rail, windshield and 55 gallon fuel tank. Wood-free construction and unsinkable at maximum capacities.
?Overall length is 19'10" X 8' wide.
This Coastal-Vokey 198 CC is equipped with Baystar steering and T-Top, Black Hull Colour /White Trim. Ask our Sales Team to help determine which electronics package is best for you. The selling price does not include electronics on this boat.
Recommended Maximum Capacities - 6 persons or 450 kgs, 900 kgs includes persons, motor, & gear.
This is a fiberglass boat package that includes the Coastal-Vokey 198 CC with above noted features, galvanized Easy Hauler trailer and Yamaha 115 HP outboard motor.
Let’s get you on the water! Competitive financing options available at Shore Cycle Marine, Mahone Bay NS
**Images are meant to be a representation and may not be completely accurate or up to date. Please connect with the Sales Team at Shore Cycle Marine for all of the information.
-
14
50hp Yamaha motor. Boat is an excellent condition. Beige seats have been treated several times to protect against UV rays and always covered when boat is not in use. Every winter boat is winterized and stored at Noddings. Trailer included.
-
15
This fiberglass boat is built in Atlantic Canada and available at Shore Cycle Marine in Mahone Bay, Nova Scotia. New deep blue paint package - fiberglass hull and completely wood-free! Coastal 198WT (walk-through) features Bay Star Steering and Trim Tabs, keel guard, cushion package, Yamaha 115 outboard and trailer included.
• Overall Length 19'9" X 7'8" wide, deep V hull, flared bow makes for an easy, smooth, dry ride.
• Built in fish well & ice box, anchor & rope locker.
• Self-bailing cockpit, rain water drains overboard.
• All moulded interior.
• Note - walk-through consoles, port console used for porta potty & storage. Starboard console
used for storage (life jackets, fish rods etc.).
• 55 gal gas tank.
• Recessed cleats, bilge pump, nav, stern, cockpit, courtesy & cabin lights, electrical panel.
• Wood-free construction.
• Cleats, grab handles, drink holders.
• Unsinkable with maximum capacities.
Maximum capacities:
• 6 persons or 320 kgs.
• 900 kgs persons, motor & gear.
Make an appointment with the Sales Team to view this beautiful boat!
**Images are meant to be a representation and may not be completely accurate or up to date. Please connect with the Sales Team at Shore Cycle Marine for all of the information.
-
16
Shore Cycle Marine in Mahone Bay is pleased to introduce Mako Skiff models to Nova Scotia! Here's the Pro Skiff 13 CC (Centre Console) package with custom trailer and 4-stroke Mercury 25HP outboard. This is an easy-to-maneuver package. The boat is wide and has a super stable casting platform, 8” draft, and has maximized interior storage. A great boat for zipping around on the salt water!
Financing available! Other fees may apply and Images are meant to be a representation and may not be completely accurate or up to date. Please connect with the Sales Team at Shore Cycle Marine for all of the information. Max HP: 40 HP Length Overall: 13 ft. 6 in. (4.11 m) Beam: 6 ft. (1.83 m) Draft: 8 in. (20.32 cm) Dry Weight: 845 lb. (383.29 kg) Max Person Capacity: 4 persons; 550 lb. (249.48 kg) Fuel Capacity: 6.6 gal. (24.98 L) Max Carry Load: 900 lb. (408.23 kg)
-
17
I don't know what these are off of.
They work free and were not used for at least 25 years.
$12.00 each.
-
18
2018 prince-craft Yukon 15 ft with 30hp Evinrude Etec with less than 30 hours aprox only used in fresh water. Would be interested in trades on can am outlander 850/1000 or seadoo /wave runner
-
19
This is a as new 4 hp mercury four stroke extra long shaft for sailboat or high stern boat ready to go or trade for a short shaft
-
20
2023 David smith boat 22by9 has a 2023 Yamaha 60 hp and a 2023 pot hauler and a Larance plotter 16 inch it’s all ready to start working!! Does not have a trailer ! Could make a plan to deliver if need be if interested send me a message!
-
21
Good working condition, trailer was inspected last year. Just don't use it anymore
-
22
Fiberglass boat 13x5 $800 or best offer
-
23
Older machine but works great, tons of fun. Comes with trailer, single donut tube, tube rope and brand new cover. $4000 OBO
-
24
Sea doo spark trixx 2021 3 up is Awsome condition comes with speaker and the cover and trailer reason for selling don’t use it much
-
25
Boat, Trailer, and Motor included
70hp Evinrude motor
New top
Will come with new batteriesSorry for the lack of details, selling this for a friend. More details can be provided if interested
-
26
16ft boat and 30hp motor for sale trailer inspected 7000 obo
-
27
60 lb stainless steel anchor
Great decoration , home, business or restaurant. $375
-
28
aluminum boat trailer 21-23 ft boat,tires and rims good condition,greasable bearings, new galvanized tounge, newly wired , new taillights,markers,plug, new tounge crank,new winch strap, very good condition small dents in the aluminium fenders. do not email or text i will NOT answer call 902-749-8699 has been well maintained SOLD!!!!!!
-
29
7 foot Kubota mower with carbide cutting blades ,belt and blades are like new ,rear discharge ,very low hours on unit asking $5800 replacement price $7200 without carbide blades , also 2 front mount hydraulic 6 foot rear discharge mower tiger cat 28 hp Kabota reduced price $6500 ,excellent working condition calls only please emails seldomly checked 902-679-8771 some trades may be considered
-
30
For sale - I have a 1940's two wheel drive garden tractor, that was sold by Sears - Roebuck & Company. This tractor could be a David Bradley tractor or not. The series # is 33543, model # 917575100. This tractor has always been stored inside, last ran 6 years ago & it still needs work on the carb. Comes with dish harrows, spring tooth harrow ( that need the wood replaced ), wheel weights, chains, price $1,500.00 Email or call Rick @ 902-684-9602. Thanks. ( no texts )
-
31
Has two rear remotes rear wiper heat ac radio self leveling loader around 110 hours like new
-
32
Electric single phase. Save money by mixing with Electric over diesel. Not needed on my operation for the time being. Comes with conveyor.
-
33
Wade rain 30ft aluminum pipe for sale.
Very good condition.
3”- 30 ft. 75 dollars a piece
4 “- 30 ft. 80 dollars a piece
5”- 30ft. 125 dollars a piece
Rain-bird 14070 sprinklers are installed and include in price !Called 902 538 7174 or call or text 902 300 2901
-
34
Farmall 706, last dyno reading 95 hp, torque amplifier works, original paint, make a great competitive pulling tractor or power unit, tires very good, engine clean and dry, final drive to pto and hydraulic power rebuilt, clutch replaced during this procedure, call for details or questions
-
35
Never used, 3-point PTO Tractor 6in Wood Chipper, PTO Shaft Included.
Specifications down below.Save $$$$ $3597 +Tx. We are required to collect HST on our farm.
Pickup near Berwick, NS. I'll help load it OR I can help arrange delivery.
- shipping size 57 x 37 x 48 inches
- operating weight: 750-800 lbs===============
You may also be interested in other tractor implements:
- up to 7ft tillers
- finish mower
- seeder
- 4 to 6in wood chippers
- post hole digger
- forestry winch
- forks
===============FEATURES AND SPECS:
- Tractor power required: 30-75 HP
- Chipping capacity: 6"
- Speed rated: 540 RPM
- Rotor Size: 30"
- Rotor weight: 190 lb
- Rotor knives: 4/reversible
- Discharge hood height: 82’’
- Feeding housing opening: 6 1/2" x 10"
- Hopper opening: 25" x 25"
- Product weight: 805 lbs- Oversized rotor with four razor sharp replaceable and reversible blades for high-output, efficient lumber processing and straightforward maintenance
25” x 25” hopper opening and 6 1/2” x 10” intake feed can receive tree limbs up to 6” in diameter with branches still attached- Gravity-fed manual feeding system offers total control to the operator, ease of use and maximizes safety in the process; you won’t have to worry about overfeeding or getting something caught in the intake
- Twig breaker paddle produces consistent wood chip sizes to prevent clogging, increase storage capacity and deliver even mulch spread after chipping
- 60” discharge chute that rotates 360 degrees to direct wood chips wherever you need them; that could be a mulch pile, truck bed or dump trailer for easy transportation to its new location
Sleek and robust hinged clamshell design houses the rotor and ensures ease of access for blade replacement, rotor inspection and cleaning or removal of jammed material- Industrial and greaseable flanged bearings disperse overall load and pressure for optimized strength, increased durability and a long-lasting reliable frame that can handle substantial work loads
- Self-balanced heavy duty steel rotor capable of storing huge amounts of potential energy for long hours and days on your property tidying up after a storm, spring cleaning or preparing for winter
- Hinged feed chute for compact transport and storage in your shed, barn or shop
- Compact enough for personal use but has the capacity and build for commercial tasks as well making this woodchipper good enough to tackle business around the house and professional jobs alike with a lower price tag
- Included category one, 3-point shear pin PTO shaft transfers power from your tractor to the woodchipper which offers more torque and force production than an electric or motorized stand-alone unit
- Designed for use with a 540 RPM PTO making it compatible with most sub compact and compact tractors (30-75 HP)
-
36
Automatic Mist blower sprayer & parts sprayer 3000.00
Model 94 Bed shaper and mulch layer 3000.00
Challenger 1800 mulch lifter . 2500.00
Mechanical transplanter model 900 mulch planter with extra pockets. 3500.00
8 ft cattle feeders 500.00 each
-
37
1978 Ford 655 4X4 loader backhoe in good working condition. Approximately 11000 hours with engine rebuild at 8000 hrs. Rubber is at 50% and comes with complete service manual. Cab floor needs some work.
-
38
For sale - I have 2 seasoned ash boards that were to be used to make handles for a walk behind plow. The boards are 78" long, 6.5" wide, 1.5" thick, price $25.00. Email or call Rick @ 902-684-9602. Thanks. ( no texts )
-
39
HD Truck Tires & Rims, size 8.25-20.
There are 6 in total available, $95ea obo.
-
40
highway truck chainsfor 1/2 ton to 1 ton trucks
-
41
Kubota 7 foot finish mower, PTO Driven rear discharge low hours, carbide blades reduced $4800 delivery available
-
42
Wade rain 30ft aluminum pipe for sale.
Very good condition.
3”- 30 ft. 75 dollars a piece
4 “- 30 ft. 80 dollars a piece
5”- 30ft. 125 dollars a piece
Rain-bird 14070 sprinklers are installed and include in price !Called 902 538 7174 or call or text 902 300 2901
-
43
Precision 4 row seeder used lightly for 2 seasons in excellent condition. Comes with 19 rollers, reason for selling looking to upgrade equipment
-
44
I would like to buy bush hog body with or with out gear box three point hitch etc.
-
45
Never used, 3-point PTO Tractor 6in Wood Chipper, PTO Shaft Included.
Specifications down below.Save $$$$ $3597 +Tx. We are required to collect HST on our farm.
Pickup near Berwick, NS. I'll help load it OR I can help arrange delivery.
- shipping size 57 x 37 x 48 inches
- operating weight: 750-800 lbs===============
You may also be interested in other tractor implements:
- up to 7ft tillers
- finish mower
- seeder
- 4 to 6in wood chippers
- post hole digger
- forestry winch
- forks
===============FEATURES AND SPECS:
- Tractor power required: 30-75 HP
- Chipping capacity: 6"
- Speed rated: 540 RPM
- Rotor Size: 30"
- Rotor weight: 190 lb
- Rotor knives: 4/reversible
- Discharge hood height: 82’’
- Feeding housing opening: 6 1/2" x 10"
- Hopper opening: 25" x 25"
- Product weight: 805 lbs- Oversized rotor with four razor sharp replaceable and reversible blades for high-output, efficient lumber processing and straightforward maintenance
25” x 25” hopper opening and 6 1/2” x 10” intake feed can receive tree limbs up to 6” in diameter with branches still attached- Gravity-fed manual feeding system offers total control to the operator, ease of use and maximizes safety in the process; you won’t have to worry about overfeeding or getting something caught in the intake
- Twig breaker paddle produces consistent wood chip sizes to prevent clogging, increase storage capacity and deliver even mulch spread after chipping
- 60” discharge chute that rotates 360 degrees to direct wood chips wherever you need them; that could be a mulch pile, truck bed or dump trailer for easy transportation to its new location
Sleek and robust hinged clamshell design houses the rotor and ensures ease of access for blade replacement, rotor inspection and cleaning or removal of jammed material- Industrial and greaseable flanged bearings disperse overall load and pressure for optimized strength, increased durability and a long-lasting reliable frame that can handle substantial work loads
- Self-balanced heavy duty steel rotor capable of storing huge amounts of potential energy for long hours and days on your property tidying up after a storm, spring cleaning or preparing for winter
- Hinged feed chute for compact transport and storage in your shed, barn or shop
- Compact enough for personal use but has the capacity and build for commercial tasks as well making this woodchipper good enough to tackle business around the house and professional jobs alike with a lower price tag
- Included category one, 3-point shear pin PTO shaft transfers power from your tractor to the woodchipper which offers more torque and force production than an electric or motorized stand-alone unit
- Designed for use with a 540 RPM PTO making it compatible with most sub compact and compact tractors (30-75 HP)
-
46
Around 11 pails of never opened oil. 32 grade. No longer running this oil in our equipment. 50$ per pail.
-
47
1999 cat forklift works well have papers
-
48
84 inch rear mulching PTO driven Kabota mower very few hours of usage carbide cutting blades never been sharpened or needs to be $4800 some part trades excepted phone calls only please 902-679-87,71
-
49
International 530 Spreader for sale. Perfect working condition. New floor last year- was used as a back up machine. $4000
Also we have a second 530 spreader for parts or repair. All parts are there just needs to be put back together-good winter project. $2000
-
50
For sale kubota bx23s
Has loader and backhoe attachment
Only 170 hours on it
Excellent condition