Buy and sell, Tools with in Canada, Ontario.
-
1
B&D 13" Electric Corded Trimmer, Blades Sharpened, Canadian
-
2
Total Blade cutting set for sale. Cuts almost anything in any direction. Cuts ceramic, steel, wood, glads, marble and more. Never used.
The set contains glade frame, two blades, two clamps and leveling device.
Brand new condition.
Price $30
Pickup in Ajax at 401 and Westney Road.
Phone: 416-887-7539
-
3
The handle shows the decimal equivalents for 8ths, 16ths , and 64ths of an inch engraved on it and there is also a case and how-to-use manual included. Used for many years by a professional millwright as the case would suggest.
-
4
It's pretty much brand new I've only done about 10 cuts of quarter round I got it on sale after tax it was $360 I'm firm at $280
-
5
Stainless Steel, brand new, 1000psi,
6 gals/ minute.
Many new and used tips and stainless steel wands available.
Were previously used on a high pressure sprayer for heavy duty cleaning.
-
6
FINANCE AVAILABLE : Brand new 2023 CAEL Tractor/Tractor and Loader/ Tractor, Loader and Backhoe with 25 HP Perkins engine, heat and roof included, EPA certified at the lowest price in the market all over canada and usa
100%customers satisfaction
https://www.capitalautoequipment.com
****Tractor Parameters *****
*Drive Type : 4WD
*Overall Dimensions L×W×H(mm): 3180×1285/1450×2290
*Wheel Track (mm) :- Front : 970/1210
- Rear : 1000/1160*Wheel Bass(mm) : 1540
*Ground Clearance (mm) : 300
*Rated Traction Force(N): 6620
*Construction Mass(kg) : 1080
*Min.Turning Radius(m) : 3.27
*Theoretical Speed (km/h) :
-Forward(low-grade) : 0~8.2-Reverse(low-grade) : 0~8.2
- Forward(high grade) : 0~20- Reverse(high grade) : 0~20
***Engine Specifications***
Model : Perkins 403F-11
Type : 3-Cylinder Vertical, water cooled,4 stroke cycle indirect injection,
Rated Power(kw/hp) : 18.4/25Rated Speed (rpm) : 2600
Bore×Stroke (mm) : 77 X 81
Total Displacement(L) : 1.131
**** Drive System****
Clutch : Monolithic dry combined with friction
Gear Box : HST+Two gears
Main Drive : A pair of spiral bevel gears
Differential : Two closed planetary wheel
Differential Lock : Tooth type
****Traveling Mechanism****
*Tyre :
- Front : 26×7.5-12 grass tire
- Rear : 11.2-20 grass tire
* Steering Gear : Full Hydraulic Steering
* Brake : Double pedal disc brakes
*** Working Device ***
* Hydraulic System :
- Lifting Capacity at 610mm Behind Lift : 3900
- Point (N) 3-Point Suspension : Category :I
* P.T.O Shaft (Rear) :
- Rotating Speed (rpm) : 540/1000
- Spline Size : 6-Φ35 Rectangular Spline
* P.T.O Shaft (Mid):
- Rotating Speed (rpm): 2000
- Spline Size : 11 teeth involute spline
1 Year Warranty on all partsPRICES :
-TRACTOR : $17650
-LOADER TRACTOR : $20499
-BACKHOE TRACTOR : $20499
-LOADER TRACTOR BACKHOE : 24499
**Optional Features**
- CLOSED GLASS CAB : EXTRA $3000
-AC $1500
ATTACHMENTS AVAILABLE:
Cultivator
Disc harrow
Mower
CONTACT ONTARIO BRANCH (365) 888-3765/ (365)317-7933
CONTACT BRITISH COLUMBIA BRANCH (604)-314-9755
We are located Hamilton, ON and Surrey, BC
We ship throughout Canada
KEYWORDS: Yanmar, Volvo, used, Takeuchi, Mini, Kubota, Komatsu, Kobelco, JohnDeere, IHI, Hitachi, excavator, dozer, construction, Caterpillar, Case, Bobcat.Hyundai, Doosan, excavators, mini excavator, mini x, mini ex, Cat, Sany, Tractor,Compact, Midi, zero tail, Terex, Wacker Neuson, JCB, track loader, skid steer,trackloader, skidsteer, LonKing, Zoom Lion, Liugong, Sumitomo, Atlas Copco,Liebherr, Mitsubishi, Samsun, Toro, Mahindra, Massey Ferguson, New Holand,Lowboy, Low Boy , Cat,
-
7
Weller 8200 Soldering Gun and Case
100/140 watts
-
8
Rare Henry 5 Bench Vice
-
9
BRAND NEW IN THE BOX - NEVER BEEN OPENED
Worth $125 from the store.
Yours for $90.00
Does NOT come with a battery.
IF THE AD IS HERE, IT’S STILL AVAILABLE
-
10
Hand Mitre saw is in great shape for it's age. There is no maker mark on it. Total length is about 34 inches. $85.00
-
11
Gundlach 830, cuts carpet base up to 6".
-
12
***WHOLESALE PRICES ***Brand new 2023 Electric Golf Cart Club Car 2,4,6,8 seaters Off -Road With Warranty at the lowest price in the market all over Canada and usa 100%customers satisfaction
https://www.capitalautoequipment.com
****Specifications*****
- Motor : 3500W AC
- Controller 60V intelligent controller
- Battery : 120A lithium battery
- Cruising range : 100-120 km
-Charger : Vehicle-mounted smart charger
- Charging time : 8-10 hours (discharge rate is 90%)
- Charging input voltage : household 220V
- L*W*H: 2400*1200*1850mm
-Vehicle equipment quality : 450KG
- Rated members : 2/4/6/8 people ( its Depend on the model )
- Maximum driving speed 30km/h
- Braking distance : ≦4m
- Full load grade : 25%
-Minimum ground clearance : 150mm
- Body structure: Steel structure frame + plastic shell
- Seat : imitation leather+PVC
***PRICES ***
## All model that are 4, 6 or 8 seats can be customized as double row or back to back seaters ##
-Golf Cart ( 2 seaters ) : $ 8599 +TAX
-Golf Cart ( 4 seaters ) : $ 9499 +TAX
-Golf Cart ( 6 seaters ) : $ 10599 +TAX
-Golf Cart ( 8 seaters ) : $ 11699 +TAX
***ACCESSOIRES (Optional ) ***
- Beach wheel : $299
-Aluminum Alloy wheel : $250
-Front Windshield : $190
-Rear Luggage Rack : $4951 Year Warranty on all parts
Also we can make any special order
Contact ontario branch +1 (365) 888-3765 and 365-317-7933
british columbia branch : +1 (604) 314-9755
EMAIL US: ontario@capitalautoequipment.com
We are located Hamilton, ON We ship throughout Canada
Keywords : buggy golf cart go kart cart car club electric car utility cart scooters
-
13
As pictured, new in box.
-
14
Located in Huntsville. $20 for everything.
-
15
Mini tile saw “baby blue” self contained water works great comes with manual tile cutter 150or b/o
-
16
Storage Containers, Cargo Shipping Container, Steel Container, Steel Storage Sea Containers, Shipping Containers, Steel Box, Storage Bins, Used Containers, New Containers.
All of our sea containers are completely sealed, wind and water tight with perfectly functional doors and solid flooring. Please contact us via phone or email to ask more or send you pictures of one of our containers. Our friendly staff will be happy to help you!
Our preliminary prices start:
20' from $2,450
40' from $3,350
40' HC from $3,550Financing and Leasing options are available as well!
We can Buy Back our Containers or Purchase your Unwanted Units! The price will depend on the Container condition and your location.We can also Modify your Container to fit your needs. Ask our representatives for details!
Call us today at: 705-315-0896
You can find more information about us on our website: www.ironcladcontainers.com
-
17
$1499.99
Manufactured in Prince George B.C. Canada
PTA-500 Product Specifications:
- Power supply voltage AC 110/220V Auto detection
- Power supply capacity 7.3 kVA
- Rated input current (TIG) 16.7 A
- Rated input current (MMA) 23 A
- Rated input current (CUT) 27 A
- Output current range (TIG) 10 - 200 A DC
- Output current range (MMA) 10 - 200 A
- Output current range (CUT) 10 - 50 A
- No-load voltage (TIG) 56 V
- No-load voltage (MMA) 56 V
- No-load voltage (CUT) 220 V
- Dia. of welding rodΦ(MMA) Max 5/32
- Arc initiation way (TIG) HF
- Arc initiation way (MMA) Touch
- Arc initiation way (CUT) HF
- Protection grade provided by enclosure IP 21
- No-load loss 50 W
- Power factor 0.93
- Insulation class F
- Duty cycle 70%
- Efficiency 85%
- Air pressure (CUT) 40-60 psi @ 4 CFM
- Gas flow (TIG) 2-5 L/min
- Gas flow (CUT) 100 L/min
- Cutting thickness (CUT) 3/4 inch @ 2.5 inches per Minute
- Weight 12 kg
- Dimension (mm) 420*210*300
What's In The Box?
- 1 piece x Ground Clamp
- 1 piece x Stick Holder
- 1 piece x Panasonic P80 torch 12ft
- 1 piece x Tig torch 12ft
- 3 sets consumables
- Regulator & water separator w/ pressor gauge
RJR Equipment Innovations LTD in a Canadian company designing quality welders and plasma cutters for the past 13 year. located in Prince George B.C
All our units come with a unbeatable 2 year replacement warranty. If you have any problems send it back to us COD and we will ship you a new unit when a tracking number is provided.
We can ship COD (Cash on Delivery) with Canada Post for a $15 fee
or We accept Visa MC AMEX and Etransfers give us a call 250.613.7523
WE WILL NOT ACCEPT CHEQUES
-
18
Hand held strapping device for skids, containers, boxes, etc. Older model (C00169), but still fully functional and as good and as easy to use as any newer model. Find on eBay for as much as $231 US new, and used ones for cheaper of course. I offer NEW in sealed bag and box. If you are strapping items/product for i.e. shipping these are essential. Asking $100 CAN. Shipping available. Thanks for looking. Cheers!
-
19
Approx 3/4 box of 2” nails for nail gun.
20 bucks
No use for them
Text 705-477-3295
-
20
Quiet 59dBA and lightweight 81lbs , great for camping. Paid $1300 at CTC 18 mths ago. Bought for camping but did not use. Sold trailer. 120v 30A locking with RV adapter.
2 120v 20A household and 12v DC outlet with battery charging cables.
-
21
Specialized fixture/jig used for the replacement of carbide teeth on circular blades. Complete and fully functional. Quantity of new carbide blanks also available if interested. Thanks for looking.
-
22
electric welder fair condition work like a new one
-
23
Master craft work bench makes offer
-
24
1 -404a sealed
2- 22 sealed
cash price for all 3
1200$ or trade for a 30 lb 134a and an electronic leak detector
-
25
Used winch but no power cord or remote cord message for details or pricing
-
26
husqvarna 325hs75 x-series hedge cutter / trimmer
Used maybe 5 times
Practically brand new
325$ obo
Temiskaming Shores but could maybe deliver
-
27
Floor Tools; Automotive Transm. Jack asking $600.00, Brake Band Rivit Tool asking $100.00, Deutz Belt Tensioning Gauge asking $600.00, Diesel Engine Timing Tools, Shop Manuals for Deutz/Hatz/DD/Lister Petter/JD Etc., New And Used Parts for these engines like Inj.pumps/Injectors/Cyl.heads/Engine cores/Crankshafts/Camshafts, Used Starters, Alternators: Radiator for JD Exc., 3.5 kW . , Micro Fiche with Deutz info from 1975 to1995 $400.00, OTC Monitor 4000E for Cars & Pickup Trucks with Printer $150.00.
For More Information, Pricing & Pictures, Please Email, jonkerdiesel@gmail.com
-
28
Diesel timing tool for standard fuel injection pumps
-
29
perfect condition fluke 179
Price is firm, firm....
Located on Vanier Avenue, Timmins, Ontario
-
30
Next to new set of 4 Planer Knives for a 24" Thickness Planer. Only used for a handful of projects so still full size in blade width. HSS knives with 18% Tungsten Carbide to keep a sharp edge longer. Over length is 24.8" by 1,3/8" wide and 1/8" thick. Made by Leitz tool company. $175 for the set of 4 knives. Earlton area. Check out my other woodworking items on Kijiji. Text 705-622-2047 for more info.
-
31
Sioux valve grinder and seat tools works great
-
32
On Sale @1299.99
reg price $1499.99
Manufactured in Prince George B.C. Canada
PTA-500 Product Specifications:
- Power supply voltage AC 110/220V Auto detection
- Power supply capacity 7.3 kVA
- Rated input current (TIG) 16.7 A
- Rated input current (MMA) 23 A
- Rated input current (CUT) 27 A
- Output current range (TIG) 10 - 200 A DC
- Output current range (MMA) 10 - 200 A
- Output current range (CUT) 10 - 50 A
- No-load voltage (TIG) 56 V
- No-load voltage (MMA) 56 V
- No-load voltage (CUT) 220 V
- Dia. of welding rodΦ(MMA) Max 5/32
- Arc initiation way (TIG) HF
- Arc initiation way (MMA) Touch
- Arc initiation way (CUT) HF
- Protection grade provided by enclosure IP 21
- No-load loss 50 W
- Power factor 0.93
- Insulation class F
- Duty cycle 70%
- Efficiency 85%
- Air pressure (CUT) 40-60 psi @ 4 CFM
- Gas flow (TIG) 2-5 L/min
- Gas flow (CUT) 100 L/min
- Cutting thickness (CUT) 3/4 inch @ 2.5 inches per Minute
- Weight 12 kg
- Dimension (mm) 420*210*300
What's In The Box?
- 1 piece x Ground Clamp
- 1 piece x Stick Holder
- 1 piece x Panasonic P80 torch 12ft
- 1 piece x Tig torch 12ft
- 3 sets consumables
- Regulator & water separator w/ pressor gauge
RJR Equipment Innovations LTD in a Canadian company designing quality welders and plasma cutters for the past 12 year. located in Prince George B.C
All our units come with a unbeatable 2 year replacement warranty. If you have any problems send it back to us COD and we will ship you a new unit when a tracking number is provided.
We can ship COD (Cash on Delivery) with Canada Post for a $15 fee
or We accept Visa MC AMEX and Etransfers give us a call 250.613.7523
WE WILL NOT ACCEPT CHEQUES
-
33
Mailhot impact drill gun. Comes with 2 batteries and charger.
-
34
Steel Shelf Wall mounted shelf with 2 doors. 36" x 18" x 42"
Great condition
-
35
Approx. 20”x12”x12”
-
36
CALL 647 363 5872
READ FULL AD AS HAS 2 SYSTEMS
SYSTEM 1
LATEST GENERATION MASTER 7.5 HP SCREW AIR COMPRESSOR
INBUILT VARIABLE FREQUENCY PRE PROGAMMED DRIVE ( RARE IN 5.5 KW SYSTEMS )
32 CFM AIR DELIVERY AT 101 PSI
208 VAC TO 230 VAC SINGLE PHASE 60 HZ
WEIGHT 360 LBS
STAND ALONE REFRIGERATED AIR DRYER
CORRESPONDING AIR STORAGE TANK
COMPLETE TURNKEY SYSTEM
VERY SMART SYSTEM AND CONTROLLED BY VFD WILL GIVE AIR ON DEMAND AND ALSO SAVE ITS VALUE IN POWER BILLS WITHIN A FEW YEARS
WARRANTY 10 YEARS.
DELIVERY WITHIN CANADA AND USA AVAILABLE.
SYSTEM 2
LATEST GENERATION MASTER 10 HP ROTARY SCREW AIR COMPRESSOR
INBUILT VARIABLE FREQUENCY PRE PROGAMMED DRIVE
49 CFM AIR DELIVERY AT 101 PSI
208 VAC TO 230 VAC SINGLE PHASE 60 HZ (RARE IN SINGLE PHASE) 3 PHASE AVAILABLE
WEIGHT 500 LBS
STAND ALONE REFRIGERATED AIR DRYER
CORRESPONDING AIR STORAGE TANK
COMPLETE TURNKEY SYSTEM
VERY SMART SYSTEM AND CONTROLLED BY VFD WILL GIVE AIR ON DEMAND AND ALSO SAVE ITS VALUE IN POWER BILLS WITHIN A FEW YEARS
WARRANTY 10 YEARS
DELIVERY WITHIN CANADA AND USA AVAILABLE.
WE CAN SUPPLY SINGLE AND MULTI STAGE SCREW COMPRESSORS AND SPEACIALITY AIR SYSTEMS FOR HIGH END TECHNICAL APPLICATIONS LIKE FOOD AND HEALTH INDUSTRY.
ENGINEERS AND CONTRACTORS WELCOME TO DISCUSS AND HELP WITH SYSTEM DESIGN.
BUY FROM MANUFACTURERS DIRECT AND SAVE BIG ON COST
.
FINANCING AVAILABLE
CALL 647 363 5872
OTHER MODELS AVAILABLE
5 HP SCREW AIR COMPRESSOR
20 HP SCREW AIR COMPRESSOR
30 HP ROTARY SCREW AIR COMPRESSOR
50 HP SCREW COMPRESSOR
100 HP SCREW AIR COMPRESSOR
COMPRESSED AIR DRYERS
DESICCAN AIR DRYERS
AIR RECIEVER TANKS
PRECISION AIR FILTERS
___________________
WE DESIGN AND MANUFACTURE INDUSTRIAL ROTARY SCREW COMPRESSORS AND COMPLETE AIR SYSTEMS. EVERY SYSTEM COMES WITH OUR UNBEATABLE WARRANTY AND PRICE GUARANTEE.WE ALSO SELL COMPRSSED AIR DRYERS, REFRIGERATED AIR DRYERS, DESICCANT AIR DRYERS, DUAL TOWER REGENERATING AIR DRYERS, MODULAR AIR DRYERS, AIR RECIEVER TANKS AND PRECISION AIR FILTERS
-
37
for sale is a rodac 501 3/8 inch air ratchet
it does have lots of nicks on it. last time i tested it was like 5 years ago with a home air compressor. it worked but didn't seem very strong. maybe it needs repair or possibly my home air compressor did not provide adequate air for it to perform like it should.selling it AS IS
$25 BUCKS FIRM
-
38
Autel MaxiIM IM608 Automotive Key Programming Scan Tool with XP400 Key Programmer & APB112 Tool, All Systems Diagnostics & Service Functions, ECU Coding, Active Tests, Oil Reset, EPB, SAS, DPF, BMS
- ADVANCED KEY PROGRAMMING IMMO FUNCTIONS: Autel IM608 key programming tool can Read PIN, add new key, key learning, remote learning, generate keys, delete keys, all-key-lost to advanced IMMO ECU Reset/Adaptation/Refresh/Coding, IMMO Data Backup, read & write IMMO ECU & MCU & Transponder and etc. With XP400 key programmer and APB112, IM608 is a pro key programming tool pick for auto technicians and locksmith. NOTE: Please send VIN number to autelofficial@outlook.com to check compatibility.
- MOST USEFUL SERVICE/SPECIAL FUNCTIONS: IM608 is one of Autels most advanced automotive scan tools. It can perform most useful service functions like Oil Reset, EPB reset, SAS Reset, DPF Regeneration, Battery Registration, Injector Coding, Power Balance, Crankshaft Position Variation Learn & VGT Actuator Calibration. NOTE: Service/special functions are NOT universally compatible. Please send VIN number to autelofficial@outlook.com to check compatibility.
- ALL SYSTEMS DIAGNOSTICS: Autel IM608 diagnostic scanner can access and scan all available modules including ABS, SRS(Airbag), Engine(ECM), Transmission(PCM), HVAC, Suspension and etc to read and clear codes, view live data, view ECU information, perform bi-directional control/active tests, matching and adaptations and etc. With Auto Scan/Auto VIN feature, it shortens the overall diagnostic and service sessions.
- UNBEATABLE VEHICLE COVERAGE: Autel IM608 car key programming tool can work on over 80 American, European and Asian makes and models including 12V sedans, light trucks and SUVs. NOTE: IM608 does NOT work on all vehicles. Please send VIN number to autelofficial@outlook.com to check compatibility. NOTE: IM608 can not perform ECU programming.
- 1 YEAR WARRANTY 1 YEAR FREE UPDATES: Autel MaxiIM IM608 comes with 1(ONE) YEAR WARRANTY and 1 YEAR FREE software updates. And its backed by 30 Day REPLACEMENT or MONEY BACK policy. If any concerns or issues, please contact us directly via autelofficial@outlook.com to get a satisfactory solution.
___________________
Protec Equipment Canada was established since 2013 in Toronto,Canada as a warehouse distributor for vehicle diagnostic scan tools such as Launch, Autel & Fcar as well as our own brand “Protec” products for wheel line service & maintenance tools & equipment in the Automotive aftermarket. Now we expanded two distribution centres in North America. One located in Toronto,Ontatio,Canada,one located in Baltimore,Maryland,United States.Protec Equipment is dedicated to offer best quality diagnostic tools and garage equipment and provide one stop shop service solutions to Canadian automotive repair facilities.
-
39
Compressor Husky 20 gallon tank
•Electric Air Compressor 20 gal.- PA--------------650.00
•Hand Crank Air Hose Reel--------PA 8002145---59.99
•paid hose reel fittings 3 pc---------PA---------------15.00
•Rubber Hose 75ft.-------------------PA 8507717---39.99
•3/8” NTP Shut Off Ball Valve Kit PA 8477671---14.99
•3/8” NTP Shut Off Ball Valve Kit PA 8477671---14.99
•Filter Canister with Element-------PA 8477218---12.99
•12” wheel plastic----------------------PA---------------12.00
•12” wheel plastic----------------------PA---------------12.00
•Brass Fitting Forged Tee 3/8 in.--PA 0400176-----6.69
•Coupler Milton-------------------------PA 0430140---10.99
•Coupler Milton-------------------------PA 0430140---10.99
•Automatic Drain Valve---------------PA---------------15.00
•PVC Whip Air Hose (yellow)-------PA 8557639---14.99
•Air Filter---------------------------------PA 8185076---27.99
labor to install all the above---------priceless----00.00
•paid total -------------------------------------------------918.60
•paid tax-in-----------------------------------------------1038.01
•sell for-----------------------------------------------------650.00
you save---------------------------------------------------388.01
mfg.---------------------------------------------------------Husky
pump type-------------------------------------------------oil
pump type-------------------------------------------------cast iron
motor-------------------------------------------------------electric
power voltage--------------------------------------------120 Volts
instructions -----------------------------------------------yes
condition---------------------------------------------------excellent
warranty residential-------------------------------------NO
warranty commercial-----------------------------------NO
-------------------------------------------------------------------------------
EXTRA EQUIPMENT:
large wheels------------------------yes (see picture)
tank auto bleed system----------yes (see picture)
pump oil quick change valve---yes (see picture)
separator air water type---------yes (see picture)
hose manual reel------------------yes (see picture)
hose mfg. -------------------------- new
hose size---------------------------3/8
hose PSI----------------------------300 PSI
hose length------------------------75 ft.
handle/ hose reel quick release--yes
tool bucket holder bracket---------yes
WORKS WITH THE FOLLOWING TOOLS:
butterfly impact wrenches
impact wrenches
ratchets
spray guns
reciprocating saws
brad nailers
caulk guns
grease guns
chisels
engine cleaners
die grinders
drills
cut off saws
operate tools standard automotive--yes
operate tools home construction-----yes
inspection-------------before delivery payment
low-ballers---------------------------------no thanks--------------------------------------------------------
Motor Capacitor info :
NGM made in MEXICO
61B1D160189NNEM
189-227MFD 165VAC 60Hz
OP.T. MAX 65C
21/02/2006 07:40 LOT: 61079826 c22.2 No. 190 US
C103237300120
------------------------------------------------------------------------
-
40
SKIL SAW. It great working order, hardly used.
-
41
Never used
-
42
On Sale @1299.99
reg price $1499.99
Manufactured in Prince George B.C. Canada
PTA-500 Product Specifications:
- Power supply voltage AC 110/220V Auto detection
- Power supply capacity 7.3 kVA
- Rated input current (TIG) 16.7 A
- Rated input current (MMA) 23 A
- Rated input current (CUT) 27 A
- Output current range (TIG) 10 - 200 A DC
- Output current range (MMA) 10 - 200 A
- Output current range (CUT) 10 - 50 A
- No-load voltage (TIG) 56 V
- No-load voltage (MMA) 56 V
- No-load voltage (CUT) 220 V
- Dia. of welding rodΦ(MMA) Max 5/32
- Arc initiation way (TIG) HF
- Arc initiation way (MMA) Touch
- Arc initiation way (CUT) HF
- Protection grade provided by enclosure IP 21
- No-load loss 50 W
- Power factor 0.93
- Insulation class F
- Duty cycle 70%
- Efficiency 85%
- Air pressure (CUT) 40-60 psi @ 4 CFM
- Gas flow (TIG) 2-5 L/min
- Gas flow (CUT) 100 L/min
- Cutting thickness (CUT) 3/4 inch @ 2.5 inches per Minute
- Weight 12 kg
- Dimension (mm) 420*210*300
What's In The Box?
- 1 piece x Ground Clamp
- 1 piece x Stick Holder
- 1 piece x Panasonic P80 torch 12ft
- 1 piece x Tig torch 12ft
- 3 sets consumables
- Regulator & water separator w/ pressor gauge
RJR Equipment Innovations LTD in a Canadian company designing quality welders and plasma cutters for the past 12 year. located in Prince George B.C
All our units come with a unbeatable 2 year replacement warranty. If you have any problems send it back to us COD and we will ship you a new unit when a tracking number is provided.
We can ship COD (Cash on Delivery) with Canada Post for a $15 fee
or We accept Visa MC AMEX and Etransfers give us a call 250.613.7523
WE WILL NOT ACCEPT CHEQUES
-
43
At FirstStop Swap $hop we want to make your Christmas brighter by having a 15% off everything that's not already on sale sale. So in keeping with the holiday spirit, we are offering a Ridgid 18 volt Sub Compact Brushless 1/2" Drill/Driver and Impact Driver Combo kit, regular price $149.95 plus tax ($169). Sale price is $127.45 plus tax ($144).
At FirstStop we offer a 30 day in store exchange or store credit.
We also offer a 0% interest layaway plan.
When you call, text or drop in, be sure to ask us about our 30 day loans.
-
44
Good unit. Diablo blade that is still sharp. Stand is great for cutting long material as the sides come out quite far. Stand folds up and has wheels.
-
45
57 inches high and 57 wide 9 drawers up and 10 drawers bottoms no pics sorry make a offer like new
-
46
RYOBI introduces the 18V ONE+ Cordless Tool Combo Kit (comes with a storage bag):
- The ONE+ Drill/Driver features a 1/2 -inch heavy duty single sleeve keyless chuck with 24-position clutch to match your drilling and driving needs.
- The ONE+ Hand Vacuum has a powerful motor and a dual-filter system that captures material for removal and provides exceptional suction power.
- The ONE+ Random Orbit Sanders delivers 10,000 orbits per minute (OPM) for a smooth, swirl-free finish on your work surface.
- Best of all, these products are part of the RYOBI ONE+ System of tools that all work on the same battery platform.This particular kit includes a Drill/Driver, Hand Vacuum, 2 Cordless Orbital Sanders, and a duffle bag to transport. Image from the box shows a flashlight and a battery - note the flashlight has been replaced with a second cordless orbital sander and the battery is NOT included.
Requires a ONE+ 1.5 Ah Batteries. The 18V 2.0 Ah Charger is compatible with RYOBI ONE+ Lithium-Ion Batteries.
**BATTERY AND CHARGER NOT INCLUDED**
**Circular saw already sold seperately (hence price drop)**
-
47
I am selling a brand new DeWalt DCF887 1/4" Cordless Impact Driver that came packed in as a set. I already have this exact driver, so selling the new one. Tool only, no battery.
Asking $175 OBO
-
48
These item's belonged to my father who has past away. I don't have no use for them
-
49
Putting this out there as a feeler. Recently left the auto trade. Spent last 5 years collecting tools. Everything form 1/4 to 1/2 inch. Sockets ratchets. Impacts. Looking to sell as a lot. 10000. Or best offer. Mostly snap on. Some matco and Mac. Also some gear wrench and master craft. Had ratchet wrenches. Pliers snap ring pliers. You name it probably have it. Will crest list this weekend and take photos.
Lots more photos upon.List of tools includes but not limited to
1/4 inch snap on SAE and metric socket sets
3/8 inch snap on SAE and metric socket sets
1/2 inch snap on SAE and metric socket sets
3/8 and half inch snap on impacts, inluding 1/2 inch wabble set and 1/2 inch axel socets
1/4 inch short medium (comfort handle) long handle snap on ratchet
3/8 short wobble head snap on, medium handle, 2 long handle swivel head comfrot girp ratchets
1/2 long handel snap on ratchet
1/4 inch blue point impact
3/8 impact snap on
1/2 impact snap on
snap on ratchet wrench set long handle
mastercraft stubby ratchet wrench and full stubby wrench as well as full handel wrench metric
mastercraft stubby and long sae wrench both ratchet and normal
snap on crows foot
huskey line wrench
bluepoint hex and invert hex set
amoungst other tools
-
50
At FirstStopSwap$hop we are having a 15% off Christmas sale. We have a Bosch Oscillating tool kit regular price, $189.95 plus tax ($214). On sale $161.45 plus tax ($182).
At FirstStop we offer a 30 day in store exchange or store credit.
We also offer a 0% interest layaway plan.
When you call, text or drop in be sure to ask us about our 30 day loans.