Cars & vehicles, Heavy equipment with in Canada, Ontario.
-
1
7610, 7710, and 7810
-
2
Skid Steer Power Broom 5 ft. sweep 18" broom 5 position manual angle Includes hydraulic hoses and skids Steer flat-faced coupler plate $1275
- 3
-
4
EXCAVATOR - PERFECT FOR MIXING COMPOST OR SLUDGE OR MIXING FLAMABLES - BRUSH INTO SOIL FOR FIRE PREVENTION ETC
OR USE CEMENT SLURRY INJECTED INTO THE PROTECTED SPRAY HOSE AND NOZZLE AT THE END BETWEEN THE PADDLES AND MIX SAND - GRAVEL OR OTHER MATERIALS TO MAKE A HARD CEMENT SURFACE.
LITTLE USED UNIT - MOUNTED C/W 90 MM PINS FOR ANY 250-350 CLASS EXCAVATOR
OR BUSH DOWN TO 80 MM PINS FOR 200-240 CLASS EXCAVATORS
TAKE THIS LOW HOUR C/W FACTORY STAND FOR $30,000.00 - NEW COST OVER $100,000.00 PLUS 6 MONTHS LEAD TIME
FRANK 604-476-7777
SEE THE VIDEOS
https://youtu.be/TiPzMbgxsgU
https://youtu.be/u-4ndeXn2cQ
DOWNLOAD OR OPEN THE ALLU PDF FILE - COPY AND PASTE :
https://www.allu.net/?post_type=allu_industry&p=2533
http://mail.ezead.com:7080/users/f.rayner/ALLU-SOIL-REMEDIATION/ALLU%20Stabilisation%20System.%20New%20concept%20for%20soil%20improvement.pdf
* Make: Allu
* Model: PM200
* BasicMachine Size - 20-30 tons
* Serial Number: 04PM200023
* Transport Dimensions: 101" L x 56" W x 61" H
* Operating Weight: 4,200 lbs
* 80 KW = 108 HP AT 100 LITRES PER MINUTE FLOW AT 2500 PSIFeatures of Unit:
Designed For Durability
Easy Mounting
Mixing Of Different Materials
Specifications
Pin Diameter: 90 mm
Distance to Pins (OC): 19" to Ears (ID): 16"
Fits: Set up for any 250-350 Class Excavator
Maximum working depth: 78"
Hydraulic: Two-way Rotation
ALLU PM Power Mix is a hydraulic equipment attachments for excavators.
When ALLU Power Mix is attached to the excavator, it turns into a mobile and efficient mixing plants.Optimum design
ALLU Power Mix is able to efficiently handle very hard materials, such as different
varieties of clay, peat, silt, sludge or polluted soil.Mixing efficiency is calculated based on the optimal horizontal position of rollers and the unique design of mixing elements.
The rollers move and mix material in three directions simultaneously.
Processing of the material to a depth of 3 meters
ALLU Power Mix can process the material to a depth of 3 meters, depending on the
equipment of the excavator and the condition of the material.Since ALLU Power Mix is an additional attachments, excavator can also be used to perform other operational tasks.
ALLU Power Mix is a perfect tool for both large and small amount of works to perform.
Designed for time-consuming tasks
ALLU Power Mix has a solid steel welded construction, all wear parts are made of wear- resistant steel, and can be replaced.
The radial piston motor is power-suppled by the hydraulic system of an excavator.
The rotation is transmitted to the roller through the chain drive.
The design requires minimal maintenance.
Easy to mount
ALLU Power Mix can easily be mounted on an excavator with the fingers or the quick-mounting adapter.
THIS UNIT IS ALSO SET UP TO WORK WITH THE ALLU POWER MIX FEED SYSTEM AS FOLLOW:
The ALLU PM power mix is a versatile accessory for excavators for in-situ soil stabilization.
The PM can process a variety of materials on site for a cost effective operation. With horizontal drums, the ALLU PF pressure feeder injects the binding agent beneath the ground directly to the middle of the mixing drums on the PM, guaranteeing better mixing to the base material.
The PF is a remote-controlled unit that follows behind the lead excavator. The power mix is available in three different model sizes to reach 5, 10 and 15 ft. (1.5, 3 and 4.6 m) depth.
For more information, call 800/939-2558 or visit www.allu.net.
-
5
2011 Frieghtliner Cascadia for sale,
1.4 M km original engine
AutomaticAsking 30k OBO
-
6
8 ton midi excavator
2011 with 5385 hrs
All possible options and upgraded features
Enclosed cab with heat & AC
Radio, suspension seat
Pin grabber coupler
Hydraulic thumb
Auxiliary hydraulics
Backfill blade
Rubber tracks
30” trenching bucket
57 hp Yanmar diesel
90” wide, 18,700 lbs, 15.5 ft max dig depth (extra reach Long-Arm)
Switchable Deere / Cat controls (SAE/ISO)
Original paint, decals – looks good stillNo issues, in daily use
Take and use it today, jobsite ready
Will need 1 new track before long, both are usable currently, one more recently replaced
Bucket and fittings reasonably tight, controls are responsive, very nice unit to operate
No leaks, issues, engine starts easily, runs strong
One-owner machine since new, extremely well maintained in-house by licenced diesel heavy equipment mechanic and well equipped shop, consignment owner is long-established local GTA prominent municipal infrastructure contractorFor more info pls see our website listing, direct page link:
http://www.comquip.ca/machines-used-mini-excavators.htmlLocated in North York. Local delivery possible
Call or text is better than email / Kijiji messaging
THIS AD WILL BE DELETED AS SOON AS UNIT SELLS. AD WAS JUST POSTED. NO NEED TO MESSAGE JUST TO ASK!$83,000
647-525-5989
.
.
.
.
ID M35-2290
-
7
2013 ITI Walking floor trailer model SFS. 53 ft. long, 102 W, and 98in.wall height. Sliding Trandem and like new Bridgestone tires 295-75-R22.5, excellent brakes. Automatic roll tarp with remote, has Roll Rite tarp return but not installed. Since 2017, has hauled 60 loads or rice hulls per year. Has 1 small patch on drive side rear, with a Hallco floor in excellent condition. No leaks and only minimal surface rust underneath. Washed and Rain X regularly. Back up lights and two rows of five lights on sides. Trailer is in excellent condition
-
8
2005 International truck dt466 engine. Great engine. No Deff. Means less headaches. 6 speed manual . These older models are reliable. Less than 350 Km . 24 ft box with ramp. Drives like new , used for moving . 416-236-1700
-
9
We carry a wide variety of Final drives / travel devices / track motors / hydraulic pumps / gear pumps and work pumps for construction and earth moving machinery.
Reconditioned and new pumps have from six months - to one year warranty.
- We stock new & reconditioned pumps for the following makes:
Bobcat
Caterpillar
Daewoo / Doosan
Halla
Hitachi
Hyundai
Isuzu Diesel Engine Parts
Kawasaki Hydraulic Pumps
Kobelco / Case / New Holland
Komatsu
Kubota
Samsung
Takeuchi
Volvo Excavator
Yanmar
We stock new, reconditioned and used major assemblies for CATERPILLAR excavators and loading shovels, such as:
FINAL DRIVES
TRAVEL MOTORS / TRACK MOTORS
SWING MOTORS
HYDRAULIC PUMPS
SWING REDUCTION GEARBOXES
MAIN CONTROL VALVES
CYLINDERS
HYDRAULIC OIL COOLERSAll our Parts are manufactured to precise OEM specifications enabling you to work safely and effectively at lower cost!
Call: 416-741-4243
50 Rossdean Dr, North York, Ontario, M9L 2S1, Canada
http://www.equipmentpartsdepot.com
3625 Weston Road Unit-5, North York, ON M9L 1V9
-
10
a well maintained truck for sale. always did all repairs and services at dealer. maintenance record will be provided. a truck with good potentials and performs well.
-
11
$400,000.00 NEW COST CUSTOM BUILT JEWELL BOOM AND TEREX DUAL DRUM EXTREME DUTY GRINDER
TAKE THE BOOM ONLY FOR $10,000.00
WE WERE GOING TO MOUNT IT ON A HITACHI 345USRL REDUCED TAIL SWING MACHINE BUT THE EXTENDING - RETRACTING BOOM WILL FIT ANY HITACHI / JOHN DEERE 400 - 470 AND OFFERS A 90-DEGREE VERTICAL SWIVEL DIPPER AND TEREX WS-120MD CUSTOM BUILT 90 DEGREE HORIZONTAL SWIVEL HEAD DEMOLITION DOUBLE DRUM GRINDER HEAD FOR TUNNELLING - GRINDING ETC
AND FOUNDATION - TRENCHING - SCALING WORK IN LOW OVERHEAD ENVIRONMENTS.
TEREX WS-120MD CUSTOM-BUILT 90-DEGREE HORIZONTAL SWIVEL HEAD DUAL DRUM GRINDER IS AN EXTREME DUTY GRINDER FOR CONCRETE DEMOLITION - TUNNELLING - ROCK PROFILING
THIS IS SET UP AS A SECOND MEMBER ON SMALLER MACHINES MOUNTING SYSTEM WITH A SWIVEL 90 DEGREE SWIVEL MOUNT FOR LOW OVERHEAD WORK OR TIGHT LOCATION WORK SUCH AS TUNNELLING
OR CAN BE MOUNTED AS A THIRD MEMBER ON LARGER MACHINES JUST CAN BE UNBOLTED AND REMOVED FROM THE SWIVEL MOUNT SYSTEM AND JUST BOLTED DIRECTLY TO A EXCAVATOR WITH A TOP PLATE MOUNTING BRACKET SYSTEM
THIS HEAD C/W HORIZONTAL 90-DEGREE SWIVEL SECOND MEMBER MOUNTING SYSTEM IS WORTH OVER $200,000.00
AS A THIRD MEMBER MOUNTING SYSTEM IS WORTH OVER $150,000.00
COMES COMPLETE WITH A CUSTOM-BUILT STEEL FORKLIFT COMPATIBLE STAND FOR STORAGE AND MOVING
ALSO HAS PRESSURISED WATER MISTING SYSTEM FOR DUST REDUCTION - JUST HOOK UP PRESSURIZED WATER TO THE WATER LINES - THE BOOM IS ALSO SET UP WITH WATERLINES
SEE A PDF FILE ON THE GRINDERS - (copy and paste)
http://media.voog.com/0000/0039/4210/files/ucm03_012855.pdf
SEE THE DETAILS AND PICTURES OF GRINDER AND THE BOOM ON MY GOOGLE DRIVE PAGE
https://drive.google.com/drive/folders/1iJDApC4v1DaM3eI1AUUFgC2Ps4xCjSyj?usp=sharinghttps://www.youtube.com/watch?v=CPCqVip3HlU
SEE VIDEOS OF THE GRINDER (copy and paste)
https://www.youtube.com/watch?v=CPCqVip3HlU
https://youtu.be/rSleaL-FoCo
https://youtu.be/BdzFNabFKQ4
DRUM CUTTER SPECIFICATIONS:
Hydraulic input power HP 160
Oil fl ow rate required gpm 66 - 106
Cutting head width in 47.2
Weight, approx. lbs 5,630 (WITHOUT SWIVEL TOP MOUNT - BARE GRINDER)Recommended excavator weight lbs
SECOND MEMBER MOUNTING 50,000 - 80,000
THIRD MEMBER MOUNTING 66,000 - 100,000 PLUS
Basic model incl. milling head
Special equipment
Transverse cutter head
Longitudinal cutter head
Rock cutting drum
Demolition cutting drum
Scaling cutting drumFIELDS OF APPLICATION
CANAL AND PIPELINE CONSTRUCTION
LANDSCAPE GARDENING
BIOREMEDIATION/SOIL MIXTURE
QUARRYING
SENSITIVE AREAS
ROAD CONSTRUCTION
TUNNELLING AND MINING
BUILDING RENOVATION AND DEMOLITIONTEREX’ mission is to make innovative products. For over 40 years the TEREX Group has been manufacturing roadheading
machines with cutting heads for mining and tunnelling operations.In the field of hydraulic transverse cutting units TEREX is the world-wide market leader and epitomises cutting-edge tech-
nology made in Germany.From civil engineering to landscape gardening – TEREX‘ cutting units show their strength and flexibility in a multitude of appli-
cations. Various hydraulic motors and cutting heads can be attached to TEREX | Schaeff cutting units, enabling an optimum
adjustment to operate conditions.The product range comprises seven types of transverse cutting units with hydraulic drive powers of 30 HP, 40 HP, 60 HP, 80 HP, 120 HP, 160 HP and 200
HP respectively.TEREX also offers solutions for special applications, such as cutting drums and slot cutting drums in various widths and
diameters, drums for cutting tree stumps, and anti-dust systems for indoor operations. Behind TEREX’ products you
will find a network of distributors who know the business inside out. Local dedicated service and support teams offer customers
professional support before, during and long after the sale.INNOVATIVE ENGINEERING – INDIVIDUAL SOLUTONS – COMMITTED CUSTOMER SERVICE OFFERING
1) Extremely economic
2) Extremely accurate cut
3) Low vibration FOR SENSITVE
4) Low noise
5) Suitable for underwater operations
6) Low maintenance
7) Suitable for narrow and deep trenches
8) Recycling of excavated material
ADVANTAGES OF CUTTING TECHNOLOGY HYDRAULIC TRANSVERSE CUTTING UNITS
TRUE ALLROUNDERSTHIS GRINDER IS FOR:
Medium-hard to hard rock and concrete
Wear-protected spiral blade for limited pick penetration, lower vibration and smoother operation
Boom extends from 14 - 20 feet and 45 degree swivel dipper for mounting of tunnel boom equipment such as a drum grinder for excavation of tunnel material in a low profile configuration
This custom built unit is composed of
•a basic low height boom set up for the factory double lift rams and integrated dipper ram •a tunnelling swivel dipper mount which rotates 2x45° either way • mounting for a dipper stick with double lift rams
Length of the standard boom to dipper mounting is 4200 mm (14 feet) extending to 6100 mm (20 feet)
Dual cylinder mounting swivel dipper stick can be custom built to accept any double drum or mondrum grinder
We were going to mount our TEREX WS-120MD Dual drum ginder head on this unit for tunnel and low overhead overhead excavation work.
All hydraulic lines c/w quick couplers for dipper mounted equipment included as well as water feed lines.
Unit is in excellent condtion.
AS WITH ANY CUSTOM-BUILT EQUIPMENT THIS IS EXTREMELY EXPENSIVE OVER $400,000.00 TO REPLACE
WE JUST DROPPED THE PRICE BY MORE THAN $50K AS WE ARE LEAVING BC FOR NB DUE TO HEALTH ISSUES FROM THE SMOG IN THE FRASER VALLEY
TAKE BOTH UNITS FOR $50,000.00
OR TAKE THE CRINDER FOR $40,000.00 AND THE BOOM FOR $10,000.00
BOTH UNITS WHICH ARE IN PERFECT CONDTION ARE SITTING AT S AND L WELDING MISSION BC (copy and paste)
http://www.slwelding.com/
WHO WOULD MODIFY IT TO FIT YOUR MACHINE QUICKLY AND REASONABLY.
THIS WOULD MAKE FOR THE LARGEST LOWEST HEIGHT GRINDER BUILT FOR TUNNELING AND FOUNDATION WORK IN LOW TIGHT AREA LOCATIONS
S AND l WHO DOES ALL OUR WORK AND WAS GOING TO MOUNT THIS ON AN HITACHI USLR 345 SHORT TAILSWING EXCAVATOR FOR US - BUT DUE TO THE SMOG AND TRAFFIC IN THE FRASER VALLEY, WE ARE LEAVING BC FOR NB WHERE WE BOUGHT A NEW HOME.
THESE UNITS MOUNTED ON A 345 HITACHI 345 USRL OR 400-470 CLASS EXCAVATOR WOULD RENT OUT FOR $600.00 PLUS PER HOUR AND WORK WHERE VERY FEW MACHINES COULD.
FRANK 604-476-7777
We can supply trucking anywhere in North America Except Mexico - we get great rates
-
12
We sell Tire changers Balancers Hoist and other garage equipment and they are in stock and we ship Canada wide 1-800-361-4095 Grand Prix Import has been selling Quality Automotive Equipment since 1977 in the Canadian market . The MONDIAL AUTOMOTIVE EQUIPMENT, GP-9 is is one of the most affordable floor plate car lifts built with quality materials and good workmanship. The lift has a strong double "S" column design to support 9000 Lbs capacity. Its an asymmetric lift - Double cylinder, Steel pulleys and equalizing cable system. - Truck adapters are included. - motor / pump 3 hp - 220 volts. -
Combo (Symmetrical and Asymmetrical) Arm Assembly
Straight Front/Rear 3 Stage reach from 22 7/8" to 42 5/8"
Straight Rear 2 Stage reach from 33 5/8" to 52 7/8"
Screw-in pads 4 pieces included
Truck adapters 4 pieces included
Double point safety lock release
Automatic arm lock restraints
Relief valve built in power pump to prevent overloading
Door guards protection rubber
Up-limit switch to protect cylinders working stroke used in safe length scope
Heavy duty 3/8" diameter cable and 5" pulley that reduce high stress on synchronization process and increase cable life
Ultra high molecular self lubricating nylon slider that ensures carriage smooth moving up and down
Lifting operation by pressing "UP" button on motor
Manual lowering operation by pressing lever
Relief valve built in power pump to prevent overloading
Overall Height: 143 3/16"
Overall Width: 134 5/16"
Maximum Lift height with Truck Adapters: 81"
Maximum Lift height without Truck Adapters: 75"
Minimum Height of Arm Top: 4"
Carriage to Carriage Width (Drive through clearance): 100"
Column to Column Width: 109"
Column Cross Section: 11"L x 7"W
Driving Mode: Dual hydraulic cylinders, chain drive
Motor: 220V Single Phase 3HP 10A (recommend a 30A breaker)
Hydraulic Oil: 3-5 gallons AW32/AW46
Lifting Capacity: 9,000 LB
Time to full rise: 50 sec
Concrete Requirement: 5" thick at 3500 psi reinforced with fiberglass or steel (
Anchor bolts/mounting hardware included
Tool trays and toe guards included- Warranty is 1 year on parts and 5 years on the structure.
-Transport service and delivery available across Canada
See my other ads !!!!!!1 year warranty on parts and 5 years on structure.
For more information contact us Tel:1-800-361-4095
Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
13
2019 load king b train 28-32 on 22.5 tires. Coil package
Combo
-
14
2016 kubota 2650, 184hrs, front b2782b snowblower, rear land pride box scraper, superb factory installed cab , heat, air conditioner, am fm radio,
-
15
They are in stock and we ship Canada wide, 1-800-361-4095 Grand Prix Import has been selling Quality Automotive Equipment since 1977 in the Canadian market .**Looking to upgrade your garage, increase your parking space and get work done on your car? The SUMMER SALE is on now.
We're excited to offer you our MP10SW double parking 4 post lifts with 10,000 lbs of lifting capacity - perfect for any garage.
Specs:
- 207.5" Wide - 188.6" Long - 77 space under the parking deck - 110V
5000 lb sliding Scissor Jack, capable of an additional 19 INCHES of lift and a set of ALUMINUM RAMPS available as an option
Our 4 post lifts come with the following:
- 110V power unir - Standard Diamond Plate steel with ramps, or optional Premium aluminum approach ramps - Completely enclosed carriages for safety, 3/16 non-skid diamond plate - Easy-operation lock handle located by power unit, minimizing any bending or squatting - Caster wheels, six steel drip trays, jack plate and mounting hardware included - 1 Year warranty on all parts; 5 Year on structure
National Shipping Available Can be picked up at the local terminal. Delivery fee's apply please contact us
For more information contact us Tel:1-800-361-4095
-
16
-new starter/push switch
-new clutch
-new pressure plate
-electronic ignition
-big tire chains
-cab
-hydraulic winch
-20 hp snowblower
-8' snow pushusher that opens to 11'
-6 foot blade to scrape gravel
- clamp for fire wood
- fork lift 4 feet
- front bucket 1/3 yard
- 2 spare radiadors (one used one brand new still in the box)
- shop manual
-new lights on cab
All accesorries easy to install
Extra parts
Tractor starts everytime easily and has a block heater for winter time.
Im the second owner only used it to push snow been stored in a heated garage all his life only issue with it is a leaking head gasket . Reason for selling it is that i now used my new argo to plow the driveway and have no use for it anymore
-
17
15hp electric motor
3 ply belting
15 to 1 shaftmount reducer
Self contained power available in hydraulic or electric
-
18
Tire machine 1-800-361-4095 ** ** Tire machine MONDIAL TC-325 HelpvSwing arm Tire changer with Bead Blaster It allows to remove and install regular low profile/runflat tires up to 24 "in diameter thanks to the pneumatic Help arm. Plastic inserts are provided to protect the alloy wheels.
- One year warranty on parts. We have all spare parts in stock.
-Transport service and delivery available across Canada, can be picked up at the local terminal delivery fees applies.Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
19
Tire machine 1-800-361-4095 They are in stock and we ship Canada wide, Grand Prix Import has been selling Quality Automotive Equipment since 1977 in the Canadian market ** MONDIAL TC-325 Balancer WB-255
TC-325 Swing arm Tire changer with Bead Blaster It allows to remove and install regular tires up to 24 "in diameter. Help arm for runflat/low profile tires is available as an option Plastic inserts are provided to protect the alloy wheels.TC-325 Specifications
Rim clamping outside 10"-22"
Rim clamping inside 12"-24"
Motor: 2HP, 15 AMPS, 120V/60Hz
Maximum Tire Diameter 41"
Wheel width:3’’-15"
Operating pressure 115-145 psiWB-255 wheel balancer can support rim size from 10" to 24", tire size up to 34", perfect for home use or business.
Rim diameter: 10"-24"
Max tire diameter: 1000mm
Tire width: 15"-16"
Balance precision: 1g
Motor: 110V- One year warranty on parts. We have all spare parts in stock.
-Transport service and delivery available across Canada, delivery fees applies.Adress
GPI
8275 17th Avenue
MONTREAL,QC
H1Z4J9
-
20
2010 Pete 389
550 Cat 1LW
18 speed
16 front axle with 14.6 springs
Super 40 rears with 4:10
24.5 rubber
1.8k
Comes with new front bumper
-
21
Tire machine 1-800-361-4095 Tire machine MONDIAL TC-325 Help& Balancer WB-255
Swing arm Tire changer with Bead Blaster It allows to remove and install regular low profile/runflat tires up to 24 "in diameter thanks to the pneumatic Help arm. Plastic inserts are provided to protect the alloy wheels.WB-255 wheel balancer can support rim size from 10" to 24", tire size up to 34", perfect for home use or business.
Rim diameter: 10"-24"
Max tire diameter: 1000mm
Tire width: 15"-16"
Balance precision: 1g
Motor: 110V- One year warranty on parts. We have all spare parts in stock.
-Transport service and delivery available across Canada, can be picked up at the local terminal delivery fees applies.Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
22
File Picture Actual Coming - Like New Condition - looks better than one shown.
72” Cut, bought new in 2022 for $5000
Trade for Bandsaw Mill, OBO
-
23
Hay equipment package,
John deere 335 round baler
New Holland 570 square baler with bale thrower
Gehl 2175 cutter
New Holland 256 rake
Good hay wagons
Ready to work
Looking to sell package
Priced for quick sale
$15k
Open to trades for a 4 up side x side or diesel generator
Located in mattawa
-
24
Selling white 256 disc with notched plades. Asking 2500$
-
25
Vermeer BC600 wood chipper in excelent condition. 27hp kohler engine with only 363 hrs on this unit. Located in Petawawa, Ont.
-
26
Selling new holland 1431 discbine. All service and ready to go with new knives. Asking 13500$ or best offer.
-
27
XA351ALP fifth wheel plate. New take off
Keyword: peterbilt kenworth Volvo Mack international freightliner
-
28
Alligator silage cutter bucket. One broken tine and tooth. Not hard to fix. $1500. Bale basket $1500ea. Two available. Wagons 4*8. Deck. 4ws. Paid $2000 last year, 1650$.
-
29
Case 4x4 tractor in great condition with only 2,612 hours
150hp with 2 new rear tires
Excellent running condition
-
30
If the ad is up it's available!! Volvo VNL 630 D16 Heavy Spec. Tractor, VNL 64T 630 – Volvo D16 600 HP XE engine with XET6 Package, lowers RPM and fuel consumption. 2050 LBS-FT, I-Shift 12 speed transmission. With mid roof sleepers, with minimal use and still in excellent condition. Front axle 14,600 LBS, rear 46000 LBS. Neway suspension. Aluminum rims and disc brakes all around. 1.13 Kms. This truck has been dealer maintained since new, can provide service records. One owner. New Fuel injectors and Conti tires in Fall of 2022. New Air Dryer and A/C in Spring of 2023. This truck is super clean, maintained and ready to go. Carfax report available. $85,800 +HST
-
31
detroit diesel #5149427
-
32
56" cat forks. where used on a 420 backhoe, IT14 and IT28. Will fit many models of Cat loaders and backhoes. $4000
-
33
Good working 2600 screen with Sf1 auto track action. Needs a tuch pad available from John Deere for around $700. Have multiple units available. $5,000 or best offer. Only one left with sf1 autotrac, one available with basics only for reduced price. Call 519-320-1832.
-
34
year 2003-New Holland TM175-front and rear 3pth,4 remotes,supersteer front axle,two cab doors,18x6 full power shift with left hand reverser,480/70/R30 At 100%,520/85/R42 at 40%,excellent condition and fully serviced,call or text Tom for details at 5195326492
-
35
Rubber for scraper blade for sale in new condition. Rubber ONLY for sale not the whole attachment. Just over 8.5 feet by 16 inches tall. Rubber is very strong. 1.5 inches thick reinforced with metal. Edge has no wear. Selling because I need a rubber blade without metal in it. Would work great for a manure scraper. Will consider trades for rubber in similar condition without metal. $650
-
36
2021 Ferris ISX 2200
211 hours
52 inch deck
Chute cover
Serviced and ready to go
Engine Brand
Vanguard™ 810cc EFI with Oil Guard
Engine Power Rating *
28
Displacement (cc)
810
PTO
Electric
Cylinders
2
Starter
Electric
Fuel Type
Gasoline
Fuel Tank Capacity (gal)
11
Hour Meter/Instrumentation
Dual-function hour meter, fuel level gauge in each tank
Cutting Width (in)
52
Cutting Height (in)
1.5 - 5
Spindles
Cast-iron greaseable
Suspension
ForeFront™ Suspension System
Transmission
Dual, commercial Hydro-Gear® ZT-4400™ Transaxles with 8.3" cooling fans
Deck Construction
iCD™ Cutting System, 2-Belt$10,000 obo
No low ballers or time wasters.
-
37
Finance available: Brand new Electric Forklift 2T With warranty at the lowest price in the market all over Canada and USA 100% customers satisfaction
Capacity Load : 2T
-Brand: CAEL
-2 level 3.5 meters ( 11 Ft 6”) door frame, with side shifter.
-Permanent magnet synchronous motor, -Battery 60V180Ah (10 pieces),
-Hydraulic steering,
-Solid tires,
-Intelligent charger,
-Fork length:1070mm
We ship throughout Canada
Contact Our Ontario Branch 365-317-7933 or 365-888-3765
-
38
***Financing Available***
Style
2-Post Overhead Car Lift
Weight Capacity
9,000 lbs
Overall Width
130 in
Overall Height
143.7 in
Minimum Lift Height
3.9 in
Maximum Lift Height
74.8 in
Contact our ontario branch 365-317-7933 or 365-888-3765
-
39
2020 Cub Cadet® Chipper Shredder Vacuums CS 3310CHIPPER SHREDDER
Features may include:
- 250cc Briggs & Stratton OHV
- 10:1 debris reduction ratio
- 3" chipping capacity
- 2-in-1 upright chipper shredder
-
40
***FINANANCE AVAILABLE ***
Brand new 2023 Mini excavator 1.3 ton with kubota engine / swing boom / thumb with EPA certified at the lowest price in the market all over canada and usa
100%customers satisfaction
https://www.capitalautoequipment.com
****Specifications*****
Brand : CAEL
ENGINE : KUBOTA Z482 12HP
Weight: 1280 KG
Transport length: 2650mm
Transport Width: 1030 mm
Transport height 1550mm
Bucket width: 420mm
Boom length: 1350mm
Arm length:700mm
Gradeability: 35%
Max traction force: 700KG
Engine: kubota (double cylinder )
Displacement: 0.794
Excavator width: 930mm
Min ground clearance:400mm
Track ground length: 1100mm
Track length: 1350mm
Track width: 180mm
Trackwidth: 1030 mm
Max dig radius 2550mm
Max. dig depth: 1600mm
Max. dig height:2500mm
Max unload height: 1750mm
Dozer blade (WxH) : 1030 x 210mm
Dozer bladelift/push: 155-172mm
Theoretical oil consumption: 1.3-1.5 (L/h)
1 Year Warranty on all parts
Price 12999 firm
CONTACT ONTARIO BRANCH (365) 888-3765/ (365)317-7933
CONTACT BRITISH COLUMBIA BRANCH (604)-314-9755
We are located Hamilton, ON and Surrey, BC
We ship throughout Canada
KEYWORDS: Yanmar, Volvo, used, Takeuchi, Mini, Kubota, Komatsu, Kobelco, JohnDeere, IHI, Hitachi, excavator, dozer, construction, Caterpillar, Case, Bobcat.Hyundai, Doosan, excavators, mini excavator, mini x, mini ex, Cat, Sany, Tractor,Compact, Midi, zero tail, Terex, Wacker Neuson, JCB, track loader, skid steer,trackloader, skidsteer, LonKing, Zoom Lion, Liugong, Sumitomo, Atlas Copco,Liebherr, Mitsubishi, Samsun, Toro, Mahindra, Massey Ferguson, New Holand,Lowboy, Low Boy , Cat,
-
41
Messersi TC90 tracked dumper wheelbarrow. 13hp Honda, planetary final drives, ride on platform, high capacity box with tailgate, 32 inches wide, aux. oil cooler. 900kg capacity. Similar to Cormidi or Wacker
-
42
2017 VOLVO VNL670
Odometer: 777,743 KMS
Year: 2017
Make; VOLVO
Model: VNL670
Suspension: Air-Ride
Engine: D13
HP: 455
Transmission: AUTOMATIC
WELL MAINTAINED UNIT!! 2017 VOLVO VNL670!! READY TO GO!!
IN-HOUSE FINANCING IS AVAILABLE AT UNBEATABLE RATES; PLEASE CALL US FOR MORE DETAILS AT289-404-3353 ( JISHANT SABHERWAL)
905-457-7800 ( OFFICE)
OR EMAIL AT SALES@MANNSTRUCKSALES.COM
-
43
MERLO P27.6 PLUS Telehandler. We carry Genie, JLG, Skyjack, Skytrak, Dieci, Merlo, CAT, and Carelift.
Make: MERLO
Model: P27.6 PLUS
Year: 2017
Hours: Approx. 1,438Features: 5952 lb capacity 19 ft reach.
If this isn’t the unit you need, give us a call.
Here at Torcan our customers come first. We pride ourselves with our knowledgeable Sales Staff and our ever growing fleet which means we can get you the right machine you need and if you don’t see the machine advertised we can locate one for you. We are your one-stop shop for all things Aerial making each sale as smooth as possible.
--------------------------------------------------------------------------------------------
Offering:
- Trade-ins, subject to inspection
- We ship worldwide! (Call for details)
- FREE delivery, within the Greater Toronto Area
- Attractive Financing / Leasing available
- Training Discounts with sold units if requested (Call for details)
- Entering the Wholesale Market – Give us a call for complete lists / details
- Both New and Used Equipment for sale
- More photos on request, or site viewings available
- Same day Quotes!!
- Various New and Used Options Available from Trusted Brands like: Genie, Skyjack, Dieci, JLG, Bobcat, Mec, Skytrak, Haulotte & More!!
--------------------------------------------------------------------------------------------
At Torcan Lift Equipment, we know our industry better than anyone else, and we are backed by our customer satisfaction guarantee. Don’t forget we encompass so much more than sales, including:
-A full Rental Fleet with over 2400 machines!
-Fully Certified and Mobile Service Department – 24/7!!
-Stocked Parts Department
-In house (at our Toronto Location) or onsite Training options available
We do it all, letting Torcan Rise above the Competition!!!
Email us today: info@torcanlift.com
Follow us on Instagram: @torcanlift
Visit our Website: www.torcanlift.com
-
44
No Payments For 60 Days When Financed Through Transport Funding
Engine: X15/500
-
45
New body....never carried a load!! 85 H x 98 W Inside Dimensions.
-
46
***Van body and Tailgate Only for Sale*** Steel Tailgate included. 96 High x 96 Wide Inside Dimensions.
-
47
2003 Sterling Acterra dump/sander truck single axle ,Mercedes diesel engine , Allison automatic rebuilt hydraulic pump , good tires and brakes
-
48
RAINBOW 4 Inch Irrigation Hydrants for Sale. Total of 6 for $150.00 Excellent condition. Stored indoors. Burford/Brantford area. Do not use anymore.
519-755-4493
-
49
Trailer - # STOCK: R-32648
2006 REITNOUER 28'+28' BI-TRAIN ALUMINIUM FLATBED
THE VEHICLES ARE LOCATED AT:
609 PRINCIPALE, SAINT-PAUL-DE L’ILE-AUX-NOIX, QUÉBEC, J0J 1G0
Financing available on site
-
50
1993 HYPAC C766B ROLLER COMPACTOR, 66in. DOUBLE DRUM, CUMMINS DIESEL, 4151 HOURS