Adam Lloyd
Ford F-100 Custom Pick Up Truck 1966 445-Powered 5-Speed
Description
Ford F-100 Custom Pick Up Truck
1966 - 445-Powered
5-Speed
$125,000 CAD
https://www.youtube.com/watch?v=XwOrhx1NVj0
https://www.youtube.com/watch?v=z3kSoaj6b3o
https://www.youtube.com/watch?v=w4yGPkoI1-k
This 1966 Ford F-100 was acquired by the previous seller in December 2016 and rebuilt over the course of three years, including the installation of a custom frame with independent front suspension, a four-link rear setup, adjustable coilovers, power steering, and power-assisted disc brakes all around. The truck was repainted green and fitted with widened front fenders and rear wheel housings, a vented hood, a raised front-hinged wood-slat bed floor, and 18″ Vision alloy wheels. Power is supplied by a 445ci stroker V8 equipped with FiTech fuel injection, Edelbrock cylinder heads, and a hydraulic roller camshaft linked with a Tremec TKO500 five-speed manual transmission. The interior houses green vinyl bucket seats and a center console, as well as multi-point harnesses, AutoMeter gauges, a Vintage Air heater, and a Hurst shifter. This F-100 is now offered with photos and records from the build.
The body was repainted in Legend Lime Metallic using PPG paint and mounted to a custom frame wet during the build, at which time widened front fenders and rear wheel housings were added along with a tailgate spoiler, a vented hood, and a smoothed rear roll pan. The seller states that one of the floor panels was replaced and the bed floor has been raised and fitted with wood slats that hinge forward to reveal the rear axle and aluminum fuel cell. The rear bumper was removed, the front bumper was refinished to match the body, and the drip rails were shaved. Additional equipment includes driving lights, a black grille, LED headlights and taillights, and exhaust outlets that exit through the bodywork ahead of the rear wheels. The seller notes a paint bubble on the firewall and a touched-up chip around one of the headlights and a few stone chips on the front bumper.
Vision Wheels 18″ staggered-width alloy wheels wear faux knock-off spinners and 245/45 Goodyear tires up front along with 275/45 Pirelli tires out back - (all run flats). Independent front suspension components were sourced from a 2003 Ford Crown Victoria, and the rear axle features a four-link setup with coilovers all around. Additional equipment includes power steering, power-assisted four-wheel disc brakes with drilled and slotted rotors, and an Art Morrison panhard bar.
The cab features bucket seats and a center console upholstered in Ivy Gold vinyl along with a black headliner and carpets. Sound deadening material has been added to the floors, and additional modifications include a Vintage Air heater, cupholders, multi-point harnesses, a Hurst shifter, and a FiTech electronic fuel-injection control interface mounted above the rearview mirror. An American Autowire wiring harness was installed. The headliner is discolored.
The wood-rimmed steering wheel fronts AutoMeter gauges including a 120-mph speedometer, an 8k-rpm tachometer, and auxiliary readouts for fuel level, voltage, oil pressure, and coolant temperature. The five-digit odometer shows 4k miles, which is said to represent the mileage since completion of the build.
The 445ci Ford FE stroker V8 was built by Survival Motorsports of Commerce Township, Michigan and is equipped with FiTech electronic fuel injection, Edelbrock cylinder heads, an Edelbrock intake manifold, an MSD ignition system, an aluminum radiator, and ceramic-coated tubular headers. The dyno sheet from 2020 viewable in the gallery indicates peak output of 462 horsepower and 509 lb-ft of torque.
Power is sent to the rear wheels via a Tremec TKO500 five-speed manual transmission equipped with a kevlar clutch and a Dana 60 rear axle housing replacement 3.73:1 gearing.
Im the second owner - 6500 miles since the completion of the build. Imported from the USA In October 2023
Work Carried out by Hinton Automotive (Muscle Specialists)
Tuned/Fuel Injection
Rebuilt Transmission
New Electric Vacuum pump
New Power Brake Booster
New Edelbrock water pump
New Gas Pump
New x2 centre grill amber/chrome headlamps
New Battery
Regular Services
Only reason for selling is that I’m relocating to Europe.
$125,000 FIRM
NO TRADES: No offers or dreamers. Any questions asked that have already been answered in the listing will be ignored.
1966 - 445-Powered
5-Speed
$125,000 CAD
https://www.youtube.com/watch?v=XwOrhx1NVj0
https://www.youtube.com/watch?v=z3kSoaj6b3o
https://www.youtube.com/watch?v=w4yGPkoI1-k
This 1966 Ford F-100 was acquired by the previous seller in December 2016 and rebuilt over the course of three years, including the installation of a custom frame with independent front suspension, a four-link rear setup, adjustable coilovers, power steering, and power-assisted disc brakes all around. The truck was repainted green and fitted with widened front fenders and rear wheel housings, a vented hood, a raised front-hinged wood-slat bed floor, and 18″ Vision alloy wheels. Power is supplied by a 445ci stroker V8 equipped with FiTech fuel injection, Edelbrock cylinder heads, and a hydraulic roller camshaft linked with a Tremec TKO500 five-speed manual transmission. The interior houses green vinyl bucket seats and a center console, as well as multi-point harnesses, AutoMeter gauges, a Vintage Air heater, and a Hurst shifter. This F-100 is now offered with photos and records from the build.
The body was repainted in Legend Lime Metallic using PPG paint and mounted to a custom frame wet during the build, at which time widened front fenders and rear wheel housings were added along with a tailgate spoiler, a vented hood, and a smoothed rear roll pan. The seller states that one of the floor panels was replaced and the bed floor has been raised and fitted with wood slats that hinge forward to reveal the rear axle and aluminum fuel cell. The rear bumper was removed, the front bumper was refinished to match the body, and the drip rails were shaved. Additional equipment includes driving lights, a black grille, LED headlights and taillights, and exhaust outlets that exit through the bodywork ahead of the rear wheels. The seller notes a paint bubble on the firewall and a touched-up chip around one of the headlights and a few stone chips on the front bumper.
Vision Wheels 18″ staggered-width alloy wheels wear faux knock-off spinners and 245/45 Goodyear tires up front along with 275/45 Pirelli tires out back - (all run flats). Independent front suspension components were sourced from a 2003 Ford Crown Victoria, and the rear axle features a four-link setup with coilovers all around. Additional equipment includes power steering, power-assisted four-wheel disc brakes with drilled and slotted rotors, and an Art Morrison panhard bar.
The cab features bucket seats and a center console upholstered in Ivy Gold vinyl along with a black headliner and carpets. Sound deadening material has been added to the floors, and additional modifications include a Vintage Air heater, cupholders, multi-point harnesses, a Hurst shifter, and a FiTech electronic fuel-injection control interface mounted above the rearview mirror. An American Autowire wiring harness was installed. The headliner is discolored.
The wood-rimmed steering wheel fronts AutoMeter gauges including a 120-mph speedometer, an 8k-rpm tachometer, and auxiliary readouts for fuel level, voltage, oil pressure, and coolant temperature. The five-digit odometer shows 4k miles, which is said to represent the mileage since completion of the build.
The 445ci Ford FE stroker V8 was built by Survival Motorsports of Commerce Township, Michigan and is equipped with FiTech electronic fuel injection, Edelbrock cylinder heads, an Edelbrock intake manifold, an MSD ignition system, an aluminum radiator, and ceramic-coated tubular headers. The dyno sheet from 2020 viewable in the gallery indicates peak output of 462 horsepower and 509 lb-ft of torque.
Power is sent to the rear wheels via a Tremec TKO500 five-speed manual transmission equipped with a kevlar clutch and a Dana 60 rear axle housing replacement 3.73:1 gearing.
Im the second owner - 6500 miles since the completion of the build. Imported from the USA In October 2023
Work Carried out by Hinton Automotive (Muscle Specialists)
Tuned/Fuel Injection
Rebuilt Transmission
New Electric Vacuum pump
New Power Brake Booster
New Edelbrock water pump
New Gas Pump
New x2 centre grill amber/chrome headlamps
New Battery
Regular Services
Only reason for selling is that I’m relocating to Europe.
$125,000 FIRM
NO TRADES: No offers or dreamers. Any questions asked that have already been answered in the listing will be ignored.
Images:
- Make: Ford
- Model: F-100
- Year: 0
- Kilometers: 0
- Ad Type: Offering
- For Sale By: Owner
Offer:
$
125000
In stock
2026-12-22
https://ohmy.ca/ottawa-ottawa/cars-vehicles/classic-cars/ford-f-100-custom-pick-up-truck-1966-445-powered-5-speed_2003369.html
Adam Lloyd
5/
5customer reviews
Category:
cars & vehicles | classic cars
2026-11-07