Cars & vehicles with in Canada, British Columbia, Skeena.
-
1
1968 Alberg Sloop
Built at Whitby Boat Works Ajax Ontario
License number: 330777
Serial Number: 376843
Overall length: 37' 2" (11.3 m)
Main beam: 10' 2" (3.10 m)
Draft: 5' 6" (1.68 m)
Depth: 5.61feet 1.70 meters
Gross tonnage: 11.28
Net tonnage: 10.54The vessel "SANDERLING" is a professionally designed and production line-built carvel FRP sailing vessel having a raked stem, round bilges to an encapsulated keel and reverse transom stern.
The vessel is laid out as follows, a fore deck accommodates a bowsprit with hand capstan, followed by a stay sail boom and trunk cabin abaft. A foc'sle escape hatch is situated on top of the forward trunk cabin with the main mast stepped on top of the keel. Aft of the forward trunk cabin is the cockpit helm area fitted with an access hatch leading to the lower deck spaces. Aft of the access hatch is the self-bailing cockpit fitted with helm station and built in storage lockers. There is a teak hatch aft of the cockpit giving access to the steering gear.
The accommodation space is laid out as follows, forward is an anchor chain locker, followed by a vee berth with an enclosed head to port. Next aft is the dinette/berth to starboard, across to port is a single berth, next aft on the starboard side are built in cupboards, ice chest, fridge and sink. across to port is the navigation station with a small chart table and electronic aids to navigation.
The engine is fitted on the centerline aft of the stairway leading up to the cockpit. The interior is finished to good pleasure boat standards, with teak used throughout.
The vessel is fitted with a single aluminum mast with one set of spreaders, aluminum boom, stainless steel wire stays to stainless chain plates.Machinery details:
The vessel is fitted with a single four-cylinder Westerbeke diesel engine rated at 37 hp, the engine is 12 volt starting, heat exchanged and fitted with a wet exhaust exiting through the transom. The engine is bolted to a Paragon reverse gear having a 1:1 reduction, driving through a .75" shaft to a fixed two blade propeller measuring 12x9.
Instrumentation includes a tachometer, oil pressure, volt meter, amp meter, hour meter( 2637.7 hours}The vessel is fitted with a single fuel tank located under the cabin sole, filled through deck and vented to atmosphere. Tank capacity is estimated at 24 gallons.
Steering is hydraulic.Electrics:
The vessel is fitted with a 12-volt DC system and a 110 volt- Ac system.The 12-volt system is made up of three batteries (new 2014) routed through individual shut offs and fitted with 50 amp in line breakers. The system is maintained by an engine driven alternator and wind generator.
The 110-volt system is routed through a factory installed distribution panel rated at 25amp. All circuits are routed through a main electrical panel with a DC volt meter, amp meter and in line fuse.
A 12-volt battery charger is also fitted.Navigation equipment:
Rule navigation lights, Magnetic compass
Standard Horizon MC 55S ser ZYU07042747
Furuno GP 3o ser 3433-8031
Furuno Navtec NX3000 ser 3550-48572
JRC radar model 1500 MK II ser 1.252299 dome and L222299 display Comav auto pilot AAZ00309
Multi controller AAV00309 ABK0012
Comnav mod 1510
Knot meter and depth sounder in cockpit Brass clock and barometerDeck machinery and equipment;
4- Barlow #22 halyard winches
3- Barlow #16 winches
sea furl spinnaker auto furl Lee sail spinnaker complete with sheet battened main sail
storm jib 150% Genoa new drifter
boarding ladder
The main sail is fitted with a coverCurrently located at MK Bay Marina, Kitimat BC
For any inquiries please contact Lee Johnson
Phone: 780-532-2825
email: moraglee@gpnet.ca
-
2
NEW AND USED HYDRAULIC POWER TRIM UNITS, SUCH AS 14035A3 OR 18-2421. WE HAVE MANY OTHERS AS WELL! WE ALSO HAVE NEW ELECTRIC MOTORS FOR YOUR OLD POWER TRIM UNIT. PLUS WE HAVE A HUGE INVENTORY OF NEW AND USED PARTS, INCLUDING LOTS OF OLDER, OBSOLETE, HARD TO FIND PARTS FOR ALL YOUR BOATING NEEDS. 250-851-0084
-
3
11’7 inflatable boat, never used, 20 hp mercury outboard, short shaft, manual start, used twice.
-
4
WE HAVE A GOOD SELECTION OF USED, FRESH WATER MANIFOLDS AND EXHAUST SYSTEMS. GREAT PRICES ON NEW MANIFOLDS SHIPPED T6O YOUR DOOR. AVAILABLE IN ALUMINUM. WE ALSO HAVE A HUGE INVENTORY OF NEW AND USED PARTS, INCLUDING LOTS OF OLDER, OBSOLETE, HARD TO FIND PARTS. 250-851-0084
-
5
Rear Travel: Fixed Install Kit: 13.0 in. (33.0 cm); TSS Install Kit: 21.0 in. (53.0 cm) Ski Type: Traverse® Dry Weight: 122.3 lb. (55.5 kg)
-
6
Engine Type: 850 Patriot Displacement: 840 cc Bore x Stroke: 85 mm x 74 mm Cylinders: 2 Engine Cooling: Liquid Cooled Carburetion: Cleanfire® Injection Ignition: Patriot™ 3DS Exhaust: Single, 3 Stage VES w/ Smart Actuator Brake Type: AXYS® RMK® LWT Drive Clutch: P-85 Driven Clutch: TEAM® LWT Front Suspension: AXYS® RMK® React™ Front Travel: 9 in. (22.9 cm) Rear Suspension: RMK® KHAOS® Rear Travel: 16 in. (40.6 cm) Ski Type: Gripper Track Type: Series 8 Track Dimensions: 15 x 165 x 2.75 in. Speedometer: Polaris® MessageCenter Gauge, Polaris® Interactive Digital Display Tachometer: Polaris® MessageCenter Gauge, Polaris® Interactive Digital Display Fuel Capacity: 11.5 gal. (43.5 L) Dry Weight: 420 lb. (191 kg) Windshield: AXYS® Low 7" Black / AXYS® Deep Snow Mid 13" Gloss Black Color: Polaris Blue; Black; Matte Sunset Red Electric Start: Optional Hand & Thumb Warmers: Standard Adjustable Reverse: PERC® Mirrors: Accessory
-
7
Tiger trax for ATV. Used them on a Thundercat 1000. Work great and are in good shape. Were like new when I got them 4 years ago. Basically just used them for plowing in the winter. Never used on anything but snow. Getting rid of them as I don’t use them enough.
-
8
2000 Yamaha SRX 700
Mileage unknown
Long track
$2000 OBO for the SRX, or willing to trade
-
9
Includes free spare belt, clutching, full oil.
We include your first service FREE ($300.00 value)!! Displacement: 998 cc Bore x Stroke: 93 mm x 73.5 mm Cylinders: 2 Carburetion: Sequential Port Injection Ignition: Spark, Coil On Plug Exhaust: Single Brake Type: TITAN® Hydraulic Drive Clutch: P-90X Driven Clutch: TEAM® BOSS Front Suspension: AXYS® Front Suspension Front Travel: 9.3 in. (23.6 cm) Rear Suspension: TITAN® Articulated Rear Travel: 16.5 in. (41.9 cm) Ski Type: Gripper, PRO-FLOAT Speedometer: Polaris MessageCenter Gauge Tachometer: Polaris MessageCenter Gauge Fuel Capacity: 13.6 gal. (51 L) Dry Weight: 722 lb. (327 kg) Windshield: AXYS® Low 7 in. Black / AXYS® Deep Snow Mid 13 in. Gloss Black / AXYS® Tall 20 in. Smoke / AXYS® Extra Tall Wide 24 in. Clear Color: Prostar S4 Electric Start: Standard Hand & Thumb Warmers: Standard Adjustable Reverse: H-L-N-R Mirrors: Standard
-
10
2001 Yamaha Venture 600 Triple. 2-up seat with front & rear hand-warmers. Carrier rack w/ skimmer hitch. Electric start & reverse. Runs & starts great. Recent tune-up included carb cleaning and new plugs. 115 average compression on all 3 cylinders. 2" track and comes with a spare track. Has a good fitted cover as well. 2288kms.
Telkwa
-
11
975 Km’s
Warranty until dec 2024
154” x 3” track
GGB trail can
Shot start
Selling as my snow check will be arriving soon
-
12
Sleds in great shape runs strong
-brand new track 2.6 lug height
-New primary clutch
Comes with some other accessories like tunnel bag, cover, oil.
-2400miles
-
13
Selling my 2020 Canam defender. Been a great machine only has 4200 km on it, don’t use anymore cause bought a quad instead. Has a factory mounted winch. If you have any questions feel free to contact me at 250 six eight five 9747. Asking 14500 obo
-
14
Good condition except for bent handlebars
All stock except ggb mountain can
Approximately 760 kms
-
15
2014 M8 153”2.6 track
Under 2000kms
Full Jaws pipe and exhaust performance kit (including stage 1 tune)
Backwoods BMP spindles
Full Trenchers A arms kit
Skinz tunnel bag
Removeable snow flap
New gauge
Extra:
Jaws Rowdy 3.5” can and Jaws Race can
Sled cover
Full set of spark plugs
A arm pivot bolts
Clutch components
New belt
Stock tool kit
Mostly mountain rode
Any questions call or text
250-567-7656
Not interested in trade
-
16
2003 Ski Doo Legend 380 and
1996 Arctic Cat 580 EFI with
Aluminum Triton Trailer
Snowmobile covers included.
Very well maintained and in excellent working condition. Ready to go.
I would prefer to sell all as a unit.
-
17
ZRT600 2 inch long track plastic ski heated hand grps runs great pick up in fort st james price is negotiable.
-
18
This is a very solid 4 stroke snowmobile with a powerful 1000cc motor. It has been very well taken care of, not played with or abused. Despite the large motor it does very well on fuel. It has around 7830 kms on it, not a lot for these 4 stroke motors, which I always hear said that you can expect 20000+ from them. I have always done regular oil changes, including changing the oil filter each time. Always used semi synthetic Yamilube , or Kimpex fully synthetic 0W-40, which is supposed to be even better. Oil changes are not that difficult on this sled either, much easier than on the Phazer I own. I have just recently done an oil and filter change on it. New battery in 2023. I bought it in 2014, with around 4000 kms on it. Soon after getting it I put a new longer 156” track on it and extended the rails some to do this. I also added a big cooling radiator at the back of the tunnel for extra cooling which works very well. It has home made scratchers on it that I made and they do a good job as well. This thing is built very strong, and tons of power for pulling or whatever you want to do. It’s not a tank to drive though like some of the big sleds with super wide tracks. I used it a fair bit for pulling in firewood, or short trips with the family just puttering around. The first few years I had it I took it on some longer trips up an unplowed road a couple hundred kms where we go riding in the spring. The last few years its use has been pretty minimal. Most everything works as it should, although I don’t think the hand warmers work, but the thumb warmer works good. It has reverse but somethings not quite right with it. I haven’t really used the reverse for years, ever since I had to replace the bearings on the drive shaft about 8 years ago and had the gear box apart, and apparently didn’t get things adjusted quite right when they were put back together. It does go into reverse but if it doesn’t move backwards easily then something starts to slip so I just never used it in fear that it might damage something. I believe it must just be an issue of the linkage not being adjusted right so it doesn’t fully engage. It was the first sled I owned with reverse so it wasn’t a big deal for me when it quit working, I didn’t think it was worth taking somewhere to have fixed and I couldn’t seem to get it right myself. I added the rack on the back, and put a turn on the exhaust pipe and shielding so that I could put stuff back there. The exhaust pipe and muffler had been upgraded with much lighter aftermarket parts before I bought the sled. It originally had dual pipes out the back, so I utilized the empty holes where the pipes used to come out and made sealed storage compartments there out of plastic pipes and screw on caps. Some of the plastics at the front are held with zip ties but nothing is broken, it’s all in nice shape. Comes with fitted travel cover too. Just bought another snowmobile so I need to let this one go. Any questions just send me a message. There’s enough snow here to try it out. Asking $3200 obo
-
19
2015 m8000 with 2016 upgrades! 3 inch track, full stage 2 SLP, belt drive, JL sound obsessions stereo with amp really loud sounds great! Adjustable handle bars. 109 hours.
7000obo or possible trade for a vehicle
-
20
1-3/4 can am wheel spacers great shape just don’t need them located in vanderhoof
-
21
2009 Polaris 800 Dragon 155
Low km 412
Selling due to low utilization
-
22
Good running Yamaha 400 single cylinder. Never had a problem. Always maintained and serviced, stored in heated shop. Alpha single rail
Jaws race can
121” track with 2” lugs
1154kms
-
23
Polaris slash 850 rmk, has just over 1300 miles, going up every other weekend, 7s screen, velocity shocks, aftermarket back bumper and tunnel bag, mbrp can and bike man adjustable weights. Missing more, lots of extra parts aswell, sleds in good shape, 11,000 obo
-
24
1988 Seasport Sportsman 2200.
5.7 l Chevrolet marine engine. 280 hp. Volvo Penta duo-prop aq290 leg.
2018 Tohatsu 9.8 hp outboard with Panther T4 autosteering.
Cuddy cabin with sink, stove, fridge, countertop.
Raymarine chart plotter.
Vberth with Thetford head.
1990 Easy rider trailer.
Bimini for back deck.
Rocna anchor and danforth anchors. 300 ft anchor line with 20 ft of chain. No mechanical anchor puller but buoy anchor puller
Downriggers + many more extras.
We adore this boat but just don't have the time to use it.
Please message for more details.
-
25
2018 Polaris outlaw 50 atv. Mint condition. Ridden by my little girls. No longer used. Throttle limiter. Great learner machine. Fresh service and new battery. Includes matching helmet.
-
26
New winch
New breaks and ball joints
Front break disk conversion
Good tires
Runs great
Heated grips
-
27
Skidoo summit 800
4500km
154 track
2008
Reverse
-
28
1000km
GGB trail can
Another year of warranty remaining
154” track
Sled is in great shape only selling as I have a 2024
May be interested in trades
-
29
Selling my 14' aluminum zodiac boat. Very tough and made of thick guage metal, rated for 40 hp motor. Comes with galvanized trailer and nice shape 25 hp merc. Asking 4800
-
30
2001 Yamaha Venture 600 Triple. 2-up seat with front & rear hand-warmers. Carrier rack w/ skimmer hitch. Electric start & reverse. Runs & starts great. Recent tune-up included carb cleaning and new plugs. 115 average compression on all 3 cylinders. 2" track and comes with a spare track. Has a good fitted cover as well. 2288kms.
Telkwa
-
31
975 Km’s
Warranty until dec 2024
154” x 3” track
GGB trail can
Shot start
Selling as my snow check will be arriving soon
-
32
1968 Alberg Sloop
Built at Whitby Boat Works Ajax Ontario
License number: 330777
Serial Number: 376843
Overall length: 37' 2" (11.3 m)
Main beam: 10' 2" (3.10 m)
Draft: 5' 6" (1.68 m)
Depth: 5.61feet 1.70 meters
Gross tonnage: 11.28
Net tonnage: 10.54The vessel "SANDERLING" is a professionally designed and production line-built carvel FRP sailing vessel having a raked stem, round bilges to an encapsulated keel and reverse transom stern.
The vessel is laid out as follows, a fore deck accommodates a bowsprit with hand capstan, followed by a stay sail boom and trunk cabin abaft. A foc'sle escape hatch is situated on top of the forward trunk cabin with the main mast stepped on top of the keel. Aft of the forward trunk cabin is the cockpit helm area fitted with an access hatch leading to the lower deck spaces. Aft of the access hatch is the self-bailing cockpit fitted with helm station and built in storage lockers. There is a teak hatch aft of the cockpit giving access to the steering gear.
The accommodation space is laid out as follows, forward is an anchor chain locker, followed by a vee berth with an enclosed head to port. Next aft is the dinette/berth to starboard, across to port is a single berth, next aft on the starboard side are built in cupboards, ice chest, fridge and sink. across to port is the navigation station with a small chart table and electronic aids to navigation.
The engine is fitted on the centerline aft of the stairway leading up to the cockpit. The interior is finished to good pleasure boat standards, with teak used throughout.
The vessel is fitted with a single aluminum mast with one set of spreaders, aluminum boom, stainless steel wire stays to stainless chain plates.Machinery details:
The vessel is fitted with a single four-cylinder Westerbeke diesel engine rated at 37 hp, the engine is 12 volt starting, heat exchanged and fitted with a wet exhaust exiting through the transom. The engine is bolted to a Paragon reverse gear having a 1:1 reduction, driving through a .75" shaft to a fixed two blade propeller measuring 12x9.
Instrumentation includes a tachometer, oil pressure, volt meter, amp meter, hour meter( 2637.7 hours}The vessel is fitted with a single fuel tank located under the cabin sole, filled through deck and vented to atmosphere. Tank capacity is estimated at 24 gallons.
Steering is hydraulic.Electrics:
The vessel is fitted with a 12-volt DC system and a 110 volt- Ac system.The 12-volt system is made up of three batteries (new 2014) routed through individual shut offs and fitted with 50 amp in line breakers. The system is maintained by an engine driven alternator and wind generator.
The 110-volt system is routed through a factory installed distribution panel rated at 25amp. All circuits are routed through a main electrical panel with a DC volt meter, amp meter and in line fuse.
A 12-volt battery charger is also fitted.Navigation equipment:
Rule navigation lights, Magnetic compass
Standard Horizon MC 55S ser ZYU07042747
Furuno GP 3o ser 3433-8031
Furuno Navtec NX3000 ser 3550-48572
JRC radar model 1500 MK II ser 1.252299 dome and L222299 display Comav auto pilot AAZ00309
Multi controller AAV00309 ABK0012
Comnav mod 1510
Knot meter and depth sounder in cockpit Brass clock and barometerDeck machinery and equipment;
4- Barlow #22 halyard winches
3- Barlow #16 winches
sea furl spinnaker auto furl Lee sail spinnaker complete with sheet battened main sail
storm jib 150% Genoa new drifter
boarding ladder
The main sail is fitted with a coverCurrently located at MK Bay Marina, Kitimat BC
For any inquiries please contact Lee Johnson
Phone: 780-532-2825
email: moraglee@gpnet.ca
-
33
NEW AND USED HYDRAULIC POWER TRIM UNITS, SUCH AS 14035A3 OR 18-2421. WE HAVE MANY OTHERS AS WELL! WE ALSO HAVE NEW ELECTRIC MOTORS FOR YOUR OLD POWER TRIM UNIT. PLUS WE HAVE A HUGE INVENTORY OF NEW AND USED PARTS, INCLUDING LOTS OF OLDER, OBSOLETE, HARD TO FIND PARTS FOR ALL YOUR BOATING NEEDS. 250-851-0084
-
34
2021 Polaris rzr turbo S ultimate with low km and 2 years of warranty left also aftermarket bumper air intake and grille interested In trades for diesels preferably a Duramax
-
35
2012 canam commander fully enclosed two door dump box good condition low km
-
36
2012 with everything off 2015 besides bullhead and tunnel, sly dog skis, c3 belt drive, aftemarket running boards, bmp clutching, can and y pipe, stp power valves and complete new top end with maybe 200km on it, possible trade for 4x4 quad
-
37
Selling my 2015 RMK 800 155' track. 2nd owner runs and drives great, bought of older couple that had it since new! Don't drive it enough. $4300 OBO. Located in kitwanga call or text at 1-250-794-2303
-
38
9.75kW 120/240V Kubota Diesel Generator
450hrs only!
-
39
Looking for used harrows 40ft preferably and root rake
Or used rook rake for skidsteer
-
40
Looking for a cheap manure spreader that needs work. And possibly other haying items in need of repair.
Thanks
Jan
-
41
6 cylinder Cummins engine with less than 1000 hours on rebuild
Machine starts and runs very strong
Been used to pull a disc for the last couple years
Located near Smithers bc
-
42
Hitachi Zaxis 27U Mini Excavator-only 398 hours, one owner, only used around the home-no hard labor, always greased and maintained, in awesome condition. Air Conditioning, heat, long-arm, hydraulic side shift, rubber tracks, hydraulic thumb, extra bucket etc. Please feel free to call or text me at 250-845-4774. Thanks
-
43
Day Cab
VIN: 1XP5D69X1RN355500
Body Style: Truck Tractor
Fuel Type: Diesel
Net Weight: 8,188 kg
GVW (kg)/Disp. (cc): 47,000
Condition: Used, requires a new radiator (quoted $310 + 6 hours of labour back in 2022 for that)Was used to primarily to move wood pellets in the past.
Last maintenance was tire rotation on Feb 2023. In Sept 2022, we replaced: the flex pipe and clamp going to the y-pipe, the middlemarker light, 2 tank bolts and right front marker light.
We welcome potential buyers to contact us if they would like to take a look at it at our office in South Hazelton.
-
44
Cat 550 Hp, 18 speed, 20k front, 46k rears, High Lift Gate, New Tires.
-
45
2003 CAT 535 grapple skidder in good running condition
15,306 hours
Just needs wood to skid
Located in Hazelton BC
-
46
500Hp XE Package , Auto 16speed, 1,207,233 KM's
interior professionally detailed.
-
47
Like new condition , 13 hp Honda , telescoping tongue/hitch, post hugger, self contained. $18,900
-
48
70 hour bike. Original Owner. Bike is in very close to mint condition. Low original hours. Some upgrades and mods. Pipe, Pipe Guard, JD jetting, Rad Guards, Skid Guard, Many more. Lighting upgrades. Lots of goodies. Original Plastic is in reasonable condition. Sticky tires. Serious inquiries only, i wont answer is this available...the bike is a solid ligitimate low hour gem and ridden by myself. Reason for selling is injury and downtime for recovery. Location is Smithers BC. No, i wont ship it. Yes i will deliver near by for a fee. No i am not open to offers or trade.
-
49
Selling my Honda CRF250F trail bike. I never use it. Could count on one hand the times i used it. In brand new condition.
-
50
May have additional dealer installed accessories that are not listed in advertised price. Must add applicable taxes. Engine Type: Single-cylinder Displacement: 109 cc Bore and Stroke: 50 mm x 55.6 mm Cooling: Air Compression Ratio: 9.0:1 Fuel System: PGM-FI electronic fuel injection with 19 mm throttle body Front Suspension: 31 mm Telescopic fork; 100 mm (3.9 in.) travel Front Brakes: Drum Front Tire: 70/100-14 Rear Suspension: Pro-Link® Showa single shock; 97 mm (3.8 in.) travel Rear Brakes: Drum Rear Tire: 80/100-12 Dry Weight: Curb Weight: 77 kg (170 lb.) Fuel Capacity: 3.7 L, including 0.7 litre reserve Wheelbase: 1,065 mm (41.9 in.) Ground Clearance: 175 mm (6.9 in.) Seat Height: 658 mm (25.9 in.) Transmission: Four-speed with automatic clutch Final Drive: #420 chain; 14T/38T Colors: Extreme Red