Cars & vehicles with in Canada, Ontario, Timmins.
-
1
Only 5500 miles. 3 pull outs .Always stored inside during the winter Serious buyers only . More info Call text or email .
-
2
2010 Keystone Alpine 4 season trailer, 4 slides, electric awning, all electric jacks, large storage, Air Condition/Furnace, granite counter top, island, fireplace, roomy bathroom with large shower, king sized bed, huge closet with laundry hookups (no laundry appliances), comes with winter tarp, new 2x30 lb propane tanks. Located in Shillington, Ontario. $29,900.00 Please call 705-471-5022 for more information.
-
3
Fiber Glass Exterior
3 pc Bathroom ensuite to bedroom (full size shower)
Electric fireplace
Three (3) pull outs
Dinette (4 chairs & table)
Carpet in Bedroom
Queen Bed - Endy mattress
Flooring in rest of camper (carpet in pull outs)
Never travelled - remained on original site
Hitch & torsion bars included
Great condition!
-
4
82" x 14' ATV Trailer Standard Features: Hot Dipped Galvanized 3,500lb EZ-Lube Axle ST205/75R14" Tires Galvanized Rims 2" x 8" Plank Floor In Frame Wiring LED lights 2" Coupler Swivel Tongue Jack Removable 4' Rear RAmp Side Ladder Ramps 9" Open Front & Side Rail
-
5
Asking $255,000 firm.
Financing available.
Please call 705-221-1435
-
6
Comes with spare tire and blade.
Great working condition.
Please call 705-221-1435
$220,000 firm, first come first serve.
Financing available
-
7
1999 International 4900 Sanding truck. Runs and works great. Chains are like new and lots of new parts.
Asking $8500 obo
-
8
TheEquipment float for hire, will haul anything that fits on the trailer up to 20,000 lbs. fully licensed and insured.
-
9
2017 Bateman 9 kw hydgen hydraulic magnet set up for excavator and 40 inch mag asking 13,000$ or make a Reasonable offer its over 20 grand new would trade for mini ex! .... grapple isn’t for sale
-
10
New 20FT. Containers Beige Only
With 8 FT. Roll Up Side Door,
Flat Steel Floor. Nice Clean Units.
**Delivery Available.
**PLEASE NOTE THAT ALL CONTAINERS WE OFFER FOR SALE ARE IN STOCK AT OUR LOCATION READY FOR YOUR INSPECTION IF YOU DESIRE.
***************************************************************
We carry a good selection of used parts for International, Ford, Freightliner & Sterling.
We also have a selection of PTO, Pumps & Wetlines for Trucks.
**********************************************************************************
We sell Used Parts,Trucks, Truck Bodies ,Trailers Containers.
*****************************************************************************
Dobson's
335 Main St. Palmerston, Ont.
Call 519-343-3521
Email john@abdobson.ca
Visit Us @ www.abdobson.ca
-
11
1980 tree farmer C7E Cummins motor 6bt and Clark transmission with a Clark winch the good model of Skidder Side blade accumulator also comes with spare tire and rim. Nice Skidder runs well works well also has brakes make a reasonable offer I’m asking 17,000$
-
12
Includes,
- 48 inch Lucknow hydraulic control snow blower
- 60 inch hydraulic 4 way plow
- 62 inch mower deck
- 2010 John Deere 2305 tractor
Private seller. No HST.
Have a John Deere 2305 with year round attachments. Looking to sell due to move into town and won’t need the tractor anymore. I’ve had the tractor for over 3 years now and has been good for plowing and snow blowing my yard and driveway. I’m able to keep a large portion of my property open all winter thanks to this tractor. Pushes and blows really good and fast. In the summer I kept about 5 acres cut with the 62 inch mower. Cuts good and fast. Tractor has never given me any problems and has been serviced regularly. Lots of life left in this tractor. The seat on the tractor is ripped and two small rust spots around the hood Only cosmetic and the only two things wrong with this tractor. Text for fastest response. 705-642-6027
-
13
Contact Denis Plante Equipment at 705-647-2582
Located on 130 Scott St. New Liskeard, Ontario
Financing available!
Direct Shipping available!
Parts and Technical support readily available!Equipped with a 306cc 10hp Predator (RATO) Engine & a 144" 10° blade & a blade speed of 3150 fpm.
4 Post Head Support
Maximum Log Diameter: 22" (51cm)
Maximum Cut Depth: 7" (17.5cm)
Maximum Cut Length: 124" (315cm)
Total Track Length: 4.1m (2x 2.05m sections)
Track Size: 3/8" x 2.25" x 3 7/8"
10 deg Blade: 144" x 1.25" x .042"
Distance Between Blade Guides: 24.5" (62.5cm)
Distance Between Blade Guide Posts: 21.5" (55cm)The Range Road RR5022B portable saw mill is a great tool for any lumber project. It has the capabilities of sawing logs up to 22 inches in diameter. 2 engine choices available: "10Hp Briggs & Stratton engine 10 HP predator engine" a 144" 10deg blade with blade speed of 3150 fpm. Our sawmill can cut from 1/16" veneers to 7" thick slabs.
You can easily add as many 2.05m extensions as your job requires.
For easy mobility, ask us about trailer packages!
-
14
Heavy duty frame from a freightliner 33.6 ft long comes with rear end and tires good for a farm can build a very solid wagon 1200$
-
15
1999 Kawasaki Vulcan · Driven 39,000 kilometers $6800 obo
1999 Kawasaki Vulcan Drifter 800cc custom. This is a one of a kind Indian replica with a tasteful new school look. Turn heads and be different with this flowing fender design. 2 seats included (Italian and Corbin) sport windshield included as well. Inbox or text 705-262-0739 if interested . Bike is stored in Smooth Rock Falls for viewing.
-
16
Willing to trade for snowmobile ! 2003 Suzuki intruder 1500, runs strong and sounds great ! Has saddle bags , vans and Hines exhaust , full windshield and passenger back rest , Will need nothing to safety . only has 21900 km. Only Has one small rust spot at rear fender. Comes with 2 up seat as well as motorcycle cover ! TRADE for snowmobile of equal value. If you're interested or have any questions please call/ text 705-363-7565 or Email me at brody.fortin98@gmail.com Thank you
-
17
2007 kx 100 cc 2strolke runs great. $3400 Obo . Posted in motorcycles, dirt bikes, motocross in Timmins. February 11, 2021
-
18
$$AVE OVER $6,300!!!! Don't Wait-Cruise with EAse with this FULLY LOADED Cruiser!
DEMO UNIT WITH LES THAN 400KM. The "Caddie" of Motorcycles, Fully Loaded and ready for your next Adventure!
CONQUER ROAD
The Star Venture TC is the most advanced transcontinental luxury tourer in Yamaha's history. Combining convenience, comfort, technology and V-twin performance, the Star Venture TC is the ultimate choice for those who choose to journey further.HIGHLIGHTS
STAR INFOTAINMENT
Quick start directions available to help you check your current system version and how to download and install the latest infotainment software release.Quick-start directions are available to help you check your current system version and to download and install the latest infotainment software release.
EXPERIENCE
A powerful 1,854 cc V-twin and 6-speed transmission (with overdrive) deliver plenty of torque and a smooth, enjoyable ride. The elegant styling of the Star Venture TC - dynamic front fairing, LED headlights and high-quality finishes - makes it stand out amongst luxury tourers.YAMAHA 5-YEAR WARRANTY
Get peace of mind standard with the Star Venture TC which comes with a 1-year factory warranty and 4 years of Yamaha Protection Plus.COMFORT
To make the most of enjoyable long-distance rides, Yamaha has a feature-packed infotainment system, plenty of storage, and heated seats with lots of space and adjustability. The infotainment system features a 7-inch display complete with audio, navigation, communication, vehicle status and equipment controls.OPERATION
Yamaha's Sure-Park system uses a dedicated motor to make low-speed manoeuvres less stressful. Extra features like the Smart Key system, traction control, riding modes and unified brakes result in hassle-free operation and an enhanced feeling of confidence.Features may include:
1,854 cc (113 cubic inch) air-cooled, long-stroke, OHV, 4 valves per cylinder, 48-degree V-twin with EFI
6-speed transmission with overdrive 5th & 6th gears, heavy-duty hydraulic assist and slipper clutch
Cable-less Yamaha Chip Control Throttle (YCC-T)
Yamaha's D-Mode variable throttle control system & traction control
Yamaha's electronic cruise control system
ENGINEHigh-performance, 1,854 cc (113 cubic inch) air-cooled, long-stroke, OHV, 4 valves per cylinder, 48-degree V-twin.
Electric starting.
OHV, 4-valve "pent roof" cylinder heads with 9.5:1 compression ratio.
CHASSIS
High-rigidity, double cradle steel frame with detachable subframe.
Heavy duty steel swingarm.
Low centre of gravity and low seat height for easy manoeuvrability.
DETAILS
Self-canceling turn signals (15 seconds or 150 meters)
4-way emergency flasher
LED tail light / brake light
-
19
This bike starts 2nd or 3rd kick, everything works, can send more pictures upon request.
Looking to get 4000$ or trade for something of interest(anything 2 stroke, enduro, atv’s race or 4x4).Other trades may be considered, show me what you have to offer. NOT looking for a vehicle or a snowmobile.
-
20
60 Hyster fork lift, indoor and outdoor,6000 lbs , propane good tires, side shift, new battery, power steering ,everything works great. Priced sell Asking 4200.00 PLEASE CALL 705-988-2294
-
21
Rubber track, 6,040 hrs, Auxillary hydraulic, blade, side boom, 3ft bucket (new)
Excellent Condition
-
22
New 2020
Heavy duty truss frame
Dodge bearings
Douglas troughing idlers
Douglas return idlers
NAE shaftmount reducer
NAE 15hp Electric motor
-
23
I’m selling my Stanley packer it was on a 420 cat backhoe but it will fit any similar size machine it work perfectly asking 4500$ obo or will trade along with a Stanley hammer for a good pickup
-
24
2009 with only 2300 hours heated and air conditioned enclosed cab has joystick or foot control selector newer tracks and drive sprockets comes with bucket forks and one new spare track asking $25000.00 call or text only 705-668-0626
-
25
2004 cat Skidder for sale. More pics coming soon. Ready to work condition!! This machine was working full time last summer until I upgraded for a newer one and been a spare for back up !! A lot done to this unit to. 500 hrs ago ; On Engine; new camshaft, lifters, all bearings, rebuilt head with all new valves!! . Both rear ends checked out and repaired what was needed. Oscillating axle with new bearings. Transmission 1000 hrs ago; all reseal on all clutch packs and new bearings on output shaft!! Tires are 35.5’s, rears are 75%, front 0% but still holds air, rubber all pealing off !!! Chains are top chape 75%.!! Center pin tight, overall pins and bushing good !! Very reliable machine, like you can see I don’t cheap out, I keep my equipment in top chape. This machine is in the bush. So if you interested and want to try it out before, no problem !! I have 2 units like this. See my other add.
PS no winch and I have a set of 30.5’s In good shape but not chains, that could be swap for less money!!! See other add
-
26
2004 case 580 super m series 2 backoe 4 new tires extend a hoe joystick control’s 6100 hrs very clean and tight unit 36 500 obo
-
27
I’m selling my Stanley hammer it was on a 420 cat backhoe but will fit any similar size machine it works perfectly asking 9000$ obo comes with a new pin will trade for a good pickup
-
28
HEAVY SPEC 2017 FREIGHTLINER CASCADIA - MID ROOF
DD16-600HP 1
8SPD
14/46 Axles Locking Rears Disc Brakes
11:R22.5 Tires 80%
Herd Moose Bumper
Dual 150 Gal Fuel Tanks
Leather Heat/Cool Seats
72" Bunk
Fridge/Inverter
646,000 KM
DPF Filters just replaced
Certified
J Hammond Transport 226-647-4652
-
29
price: $450.00
-
30
144 X 1 1/4 STUDDED TRACK IN GREAT SHAPE (SWITCHED TO A 2'' PADDLE)
CALL OR TEXT 705 232 8595
-
31
Iceage 129 inch rails,not cheap extensions, with new ripsaw track. New c&a skis. Pump gas mix. Extra belt and cover. skid plate, 742 miles . trade for stand-up pwc
-
32
Very good condition, apart from one ski is bent at the front. Only 2 woman owners, automatic Start, reverse great working hand warmers.
-
33
Great Condition, hardly used. Comes with single rider regular seat & the double long seat for 2 riders.
-
34
Under 1000 km
Roof windshield stereo winch snorkel mud light radial tires . Extra rims and tires
Message for details
9k obo
-
35
137” track with 1-1/4” paddles
Carbureted
291 km, 13hrs
Grip & throttle warmers
Electric start/Reverse & manual pull start
Comes with: -spare belt
- cover
- warranty until dec 2020
This I a great machine that runs very well! Only ever used 91 octane fuel. Always been run easy, still not broken in.
Only reason I’m getting rid of it is because I need more of a utility snowmobile to suit my applications
-
36
Take advantage of the year's best pricing during the Polaris Factory Authorized Clearance until September 30th. Engine Type: ProStar 900 4-Stroke DOHC Twin Cylinder Displacement: 875cc Cooling: Liquid Fuel System: Electronic Fuel Injection Front Suspension: Dual A-Arm with Stabilizer Bar 10 in (25.4 cm) Travel Front Brakes: 4-Wheel Hydraulic Disc with Dual-Bore Front and Rear Calipers Front Tire: 26 x 8-12; PXT Rear Suspension: Dual A-Arm with Stabilizer Bar 10 in (25.4 cm) Travel Rear Tire: 26 x 9-12; PXT Dry Weight: 1,150 lb (522 kg) Wheelbase: 79 in (200.7 cm) Ground Clearance: 11 in (27.9 cm) Fuel Capacity: 9.5 gal (35.9 L) Towing Capacity: 1,500 lb (680.4 kg) Transmission: Automatic PVT P/R/N/L/H Drive System: True On-Demand AWD/2WD
KIT REF ID: 16902832
-
37
Anyone out there have a sled good working condition willing to personally finance it to me around 2-4,000 , I don't have a down payment as of now but can sell current sled for around 5-600 and pay that aswell, pretty shitty go last few months on benifets through insurance and have never faulted a bank payment for a vehicle credit is high 600's... ownerships a must.
-
38
Need a cheap little machine for ice fishing or something that needs work don’t matter how old it is ! Polaris star tundra or bravos safari etc. If it needs works it fine I’ll gladly take it off your hands
Looking to spend 650 $ max
-
39
700 SKS edge chassis . Sled being completely serviced, cleaned and detailed and has electric start. Will be ready shortly and am taking name and number for those who are interested and will be felt with in order of shown intetrest. I do not like selling any of my sleds till I have made sure they are good to go. $2600.00 or best offer. Call Bob @ 705 364-7967. For more info