Cars & vehicles with in Canada, Nova Scotia, Truro.
-
1
Selling my Polaris Sportsman 570. Bike only has 470 km
-
2
2014 brute force, bike runs and drives great, brand new tires on ss rims, bike was recently looked over by a mechanic and needs nothing, bike has 7119 km asking 6000obo
-
3
2003 Blair Morgan 800, sleds in good shape. Engine was done and not used a lot. Has some clutching to go with it. Weights and gears and springs and a helix…Will need some front end attention, A arm bushings and such. Starts right up. Needs a good clean up and it would look real good. May trade for somthing or 2500 obo has reverse
-
4
Selling my 2016 Artic Cat Alterra 550 XT. Camouflage in colour. Power steering. Electric start. ATV has low KMs at 2,500 and low hours at 130. Excellent condition. No trades. No out of Province buyers. If the posting is up it is available.
-
5
1987 Skidoo Tundra 250 LT
250cc engine. Carb cleaned plus all new fuel lines and filter.
New 8” ski skins, steel runners and windshield.
Have papers in my name.
Asking $2800 OBO
-
6
New Apollo SMX Hurricane ATVs in stock at Our Little Bike Shop Limited.
125cc four stroke engine
Electric start
Forward, neutral and reverse
Throttle limiter
Safety tether
Hydraulic rear brake
High and low beam lightsWe currently have Pink and Orange models in stock.
Only $1499.99+tax! Free freight and PDI ($250 value)
Delivery/Shipping available
Other models in stock as well. Call, text or message us today to see what products we have in stock and follow our Facebook page to keep up to date with new arrivals and what is going on in the shop!
We also service all makes and models of ATVs, dirtbikes, snowmobiles and small engine equipment.
Our Little Bike Shop Limited is located in Brookfield, NS. Just 5 minutes from Highway 102.
(902) 497-6889
info@ourlittlebikeshop.ca
-
7
16 ft speed boat with a 292ci engine very fast boat runs good alpha 1 v8 drive boat comes with trailer but no papers with trailer, comes with new light kit for trailer and can be towed on the road, boat has had floor work done this spring engine was out of a lobster boat that had closed cooling asking 4000obo
-
8
- 16' long 7' wide
- Built over new last year.
- Comes with galvanized trailer
- 115 hp mercury, oil injected
- 3.5 hp kickker motor
- gps plotter/depth sounder
.Turn key ready to go.
Call or txt 902-885-5557
-
9
Completely redone boat ,new paint and transome, deep front haul.ready to go in the water. Nice home built brand new trailer 3500 or open to decent offers text or call any ask for greg 17808982535
-
10
Jet in the salt water 3 times
-
11
Boat has fibreglass hull with fibreglass over wood wheelhouse (built in 2018) It has some electronics eg: marine two way, fish finder, stereo. It’s powered by a Mercury 135 OptiMax outboard. Also equipped with head. There’s a galvanized tandem axle trailer with it as well
-
12
2005 232 Coastal Wellcraft, with 2006 Yamaha 225 4 stroke, approx. 100 hours on motor. New upholstery, very clean boat from Georgia . Just spring serviced with tandem trailer. Cuddly cabin with fresh water system and toilet.
-
13
In great working condition brand new easy hauler trailer in 2021
-
14
12 ft aluminum gangway 1500.00 or reasonable offer
-
15
14 foot fiberglass canoe no leaks ,comes with 2 paddles and 2 life jackets asking 450
-
16
2017 22ft bayliner mint condition for sale .
-
17
Looking for a RC-82H mower deck for Kubota b8200 hat and all hardware.
-
18
I’m searching for a rubber track for a hitachi excavator. 450x81x72
Looking for new or used
-
19
303.5E Cat excavator for sale. It is air conditioned. It comes with one digging bucket, rubber tracks, and is plumbed for attachments. I'm asking $65,000 or best offer.
-
20
High Jackers $ 100.00 each.
Round bale feeders ideal for horses $ 250.00 (SOLD)
Square bales thrower $500.00
Bedding Spreader $ 1200.00
-
21
New instock. 4-in-1 bucket is a multi-functional working tool integrating four operations: loading, bulldozing, leveling, and clamping.
Open distance 28.3"
Pressure 16-21Mpa
Capacity 0.5 CBM
Packing information 74.5" × 35.40" × 32.3"
Weight 970 lbs
Clamping Force(N) 8230
Suitable Flow (L/min) 50~120
-
22
New Excavator Hydraulic Post Pounder, 700 Ft-lb Energy Class, 500-900 BPM, 8” Post Capacity, 4-7 Ton Excavator, TMG-EPD700
-
23
Have one #T8,Bondioli heavy duty pto shaft with shearpin yoke one end. six spline yoke both ends. Full shield. shaft is straight and good as a new one. Approx 35" long tip to tip closed.For bigger snowblowers,wood shippers,etc.$500.00(less than half of a new one that is closer to $1300.00). Phone 902 664 6151. AMHERST location.
-
24
New bearing , bought new in 2005 and never used . Would like to get 1,000.00 for it. Company won’t warranty it after 5 years because the grease has a 5 year shelf life . Pickup in Upper Stewiacke.
-
25
New instock. TMG Industrial 70” Vibratory Topsoil Rock Screen, 5.5 HP Kohler Engine, Cantilever Leaf-Springs, 30° Screen Deck, TMG-RSV70G
-
26
10 Use 3/8" load binders
Used and new, sold as a lot
-
27
Legend 14 foot ultralite 2017 but purchased new in 2021. 2021 boat trailer.
2020 9.9 honda 4 stroke short shaft with electric start. All purcased new at the same time.
-
28
Check out our online inventory for more used parts and vehicles
online!
www.crossroadscycle.net
or give us a call (902) 667-0917
crossroads cycle
11103 highway 6
Pugwash NSMonday 9-5
Tuesday 9-5
Wednesday 9-5
Thursday 9-7
Friday 9-7
Saturday 9-4
Sunday closedlive music in store every Saturday
from 11 to 3
-
29
Check out our online inventory for more used parts and vehicles
online!
www.crossroadscycle.net
or give us a call (902) 667-0917
crossroads cycle
11103 highway 6
Pugwash NSMonday 9-5
Tuesday 9-5
Wednesday 9-5
Thursday 9-7
Friday 9-7
Saturday 9-4
Sunday closedlive music in store every Saturday
from 11 to 3
-
30
**** Contact us directly for easy financing options, regardless of credit!****
Never been in the water! 0 hours! Brand new condition and includes new trailer. Save thousands!!!!
Easy online financing available; www.onlinefinancingapp.com or call 902 667 0917
Visit www.CrossRoadsCycle.net to see all of our amazing inventory!
11103 Highway 6, Pugwash, Nova Scotia
-
31
I have 2 sets of Thule Kayak J hooks
Brand new in box
Still have the receipt
250.00 each
-
32
Bought last year from MEC. Used once
-
33
Coastal 182 Open/Fisherman/Utility Boat - full fiberglass construction. Trailer, Yamaha 70 outboard are included in this package.
Wood-free Coastal-Vokey 182 Open Fishing / Work Boat. Overall length is 18’3” X 8’ wide, deep V, flared bow makes for an easy, dry ride. Options added include keel guard and bilge pump kit.
• 6 persons or 300 kgs
• 800 kgs includes persons, motor and gear.
• Complies with Canadian Coast Guard standards.
Make an appointment with the Sales Team to view this sturdy boat! Let’s get you on the water! Competitive financing options available at Shore Cycle Marine, Mahone Bay NS
**Images are meant to be a representation and may not be completely accurate or up to date. Please connect with the Sales Team at Shore Cycle Marine for all of the information.
-
34
Center Pontoon for any Pontoon boat - 3rd Tube / Tri-toon
We have standard Center Pontoons in stock:
▪15ft / 24/25 inch
▪17ft/ 24/25 inch
▪20ft/25 inch
▪25ft/25 inch
▪29 inch Universal PE pontoon sectionsPrice starts at $1,990 - Warehouse Nackawic, New Brunswick
Why adding a 3rd (Center Tube) Pontoon to your pontoon boat ?
A 3rd Pontoon brings up your boat on top of the water much easier and faster, which brings you :
- More stability
- Better performance
- Higher horse power
- Higher payload
- Higher millage
- More saftey
- Increasing the value of your boat significantThere are different ways for adding a Pontoon. One piece aluminum pontoon or our DIY polyethylene pontoon sections.
Options:
# You add a short aluminum or hdpe Center Pontoon and keep your original motor support - Easy and low cost, better performance, higher payload, more HP
# You add a whole aluminum or hdpe Center Pontoon with integrate motor support (IMS) - Better performance then a short tube, even a higher payload and HP
# You add a slightly bigger aluminum or hdpe Center Pontoon, with or with IMS - High performance, higher payload, more HP
# You add a short aluminum or hdpe Center Pontoon in the back with with integrate motor support (IMS) - Better performance, more buoyancy in the back, slightly more HP
To give you a quote we have to know :
- Length of pontoon.. tip to motor mount (short), our length of original pontoons ?
- Diameter of your original pontoons ?
- With integrated motor support ?
- With lifting strakes ?
- Width between top of the pontoon and crossmember frame ( by order )
- Aluminium or 29 inch polyethylene ?
- You need a tank in the pontoon ?We offer any size and diameter of pontoon sets, single pontoons, pontoon boat deck kit and full pontoon boat kits
**PRICING & LEAD TIMES ARE SUBJECT TO CHANGE UNTIL ORDER IS CONFIRMED.
SUBJECT TO PRIOR SALES.
-
35
Check out our online inventory for more used parts and vehicles
online!
www.crossroadscycle.net
or give us a call (902) 667-0917
crossroads cycle
11103 highway 6
pugwash,NSMonday 9-5
Tuesday 9-5
Wednesday 9-5
Thursday 9-7
Friday 9-7
Saturday 9-4
Sunday closedlive music in store every saturday
from 11 to 3
-
36
JUST SKI 1150LB LIFT IN STOCK!
CALL 902-883-7108 for more information!
-
37
Lots of 1967 Chevelle parts will be going to the debert car show tomorrow bringing some of them with me…….have doors, trunk lids, bumpers, brakes, trunk pans, quarter panels will be at the car show at debert airport Sunday July 2nd or you can reply to this ad as well
-
38
I would like to trade this Barracuda for a 60's-70's GM 4 seater and I could do $$$ up or down to make the trade. No cash price at this time
It is the premium model with factory A/C and all the chrome/stainless. Original 273 Commando 4 barrel motor runs great but the
automatic transmission is weak
This car just came from Tennesse last year. Painted once many years ago, this car was never a rust bucket
It has all original panels, floors and subframes .
The car is dark blue with a dark blue interior, the front bucket seats need new covers installed [new ones come with the car] and the dash pad is cracked, the rest of interior is good
I also have a 1973 Corvette coupe, factory big block, matching #'s 454 , muncie 4 speed, excellent frame, good interior, stored since 2004, that I will sell or trade for a 60's-70's GM four seater or $17,000 cash. Come pull it out of my barn.
Original owner was a Montreal Canadian
-
39
92 Mazda Miata works great, no rust calls only for price and details 902-899-3993
-
40
1955 international coe ,rust free from nebraska ,454 chevy engine, automatic transmission , 20 inch rims, will consider trades plus cash
-
41
This car needs to be restored but still runs, I drove Howe home back in Oct. IF AD IS STILL UP CAR IS STILL AVAILABLE. I will not be answering if it’s still available or not. Thank you
-
42
Pondering the thought of selling my 84 k10 truck is in good shape inside and out have owned it for 3 years, has 2001 5.3 ls with 120k, headers, ict billet coil brackets and motor mounts, th400 trans shifts good, 4wd works as it should, new speedo cable, pioneer sound system, tires and wheels are new less than 1500 km more
Only reason for selling thinking about getting a 2wd
-
43
Are you going to prom? Getting married? Make this special day unforgettable, arrive in style in this beautiful 1958 Meteor Rideau.
Seats up to 4 passengers
Available for pickup/drop off and photos
150$ per hour . Minimum charge of 250$
Pay up front. PM for availability.
Please include date, times, and locations of pickup and drop offs.
Also available for photo shots and movieset
*weather permitting*
-
44
Foreign and Domestic Automotive Fuel Tanks with Warranties Call or Message Jim 902/890/2376 Truro area, shipping available.
-
45
4 cyl. Supercharged, retractable hard top convertible.
Mvi good for another year.
Automatic.
Runs awesome.
Only 106,000 km.
Tires like new.
Clear coat is coming off paint in several spots. Appears to be original paint.
Cool, fast little sporty car!
11,500. Cash or interesting partial trades.
-
46
1954 International cabover. Truck is sitting on a 2001 Dodge Ram 3500 single wheel 2wd chassis. The 24 valve motor has been swapped for a 12 valve industrial rotary pump motor. Has a NV5600 2wd transmission. Lots of professionally made custom parts including steering column, shifter, exhaust manifold, exhaust brake, stack, exhaust system, hydroboost, etc. I also have the original chassis for the truck with a rebuilt motor that has not run in years. This is a project truck that still needs quite a bit to be finished. Cab is in near mint condition. Truck will be a head turner once it’s on the road. I will sell the originally chassis and running gear for $1700 or everything for $18,500. Price is firm and will not be taking trades of any sort. Will hate to see it go but really could use the space.
-
47
1978 Peterbilt 359 for sale
Commonly known throughout the east coast as the “Atlantic Breeze”, this truck has quite the history. To the best of my understanding I am the 3rd owner, the first owner purchased it new and had it until a few years ago. This was the first 359 unit to enter Canada with a water, and I believe the first with a walk through sleeper. Forgive me if I’m wrong but I’ve heard that from a lot of people that know the truck well.
100% solid unit. Was stored inside the last number of years. The frame is on excellent shape. This truck has a 400 Big Cam Cummins, which starts at first touch of the button, no matter how long it’s sat. We fire it up every couple weeks and move it around the yard. We even had it fire up at -25 this winter without any assistance. The truck needs a number of things, interior, inspection, etc etc etc, but, it starts, and drives without any issue whatsoever.
I purchased this unit with the intention to rebuild it to its original condition. When I bought it, my shop was not nearly as busy. Now, we’re rebuilding late 90’s - early 2000’s trucks steadily. Right now we have 3-4 rebuild projects ahead of this one, and we’ll be lucky to get to this truck in 2024. The trucks we’re rebuilding are going to work, and this truck was never purchased with the intention to be put to work. I planned to rebuild it to bring around to shows, but I really don’t have the time nor interest to bounce between truck shows.
This truck deserves to be rebuilt as a show truck. Or rebuilt as a toy hauler. Or maybe even rebuilt for the right fella to go back to work with. Either way, if I am going to sell it, I want to see it go to a good home.
I have no need to sell it, so please don’t waste my time with low ball offers. Just keep scrolling. It is located in Amherst, NS. Feel free to reach out for further details.
I would consider trades of the following:
Camper, Pontoon Boat, Speed Boat, Jet Ski, Snowmobile, Side By Side, ATV, Sports Car, Pickup Truck, Highway Trailer (Flat Bed, Step Deck, Dump Trailer, etc), Highway Tractor (379, W900, Classic or 4900), etc.
Tim @ 506-540-0761
Jason @ 902-951-0761
Emily @ 709-690-0761
-
48
I have a weight rack that came off the front of a MF 265 tractor. it is made of 1/2" x 4" flat stock and is 18" wide. Selling for $25.00
-
49
Bought new one. No longer need this one. Runs but needs tune up and leaks fluid. Motor oil looks milky. Not sure what it needs. As is. Lifts good. Shifts good. Has breaks. Not inspected. No propane tank included. I need for new one.
-
50
Good 14L Detroit in 2007 Columbia with 13 speed and 40 rears with 3.58s
classic has 13 speed and 3.90 rears. Engine is no good.
Located just passed Truro