Cars & vehicles with in Canada, British Columbia, Vancouver.
-
1
Segway Ninebot MAX (G30P) , good condition installed custom suspension
-
2
2005 sterling dump truck and 1998 pony =
$ 77,888.00
Just the 2005 dump truck is $62,000.00
15 speed
Cat c15 475
High lift gate
Air tarps
Fresh CVI just done
-
3
*Original NEW in box we have in stock.
( NEXIQ ADAPTER KIT )
Includes cables 9-pin, OBD2 connectors
for all Heavy duty trucksSHIPPING AVAILBLE - CANADA / US
-
4
2011 Ford F-550 Flat Deck Hi--Rail Truck 2WD Power Tailgate, 6.8L V10 SOHC 30V Gas engine, 10cylinder, 4 door, RWD, cruise control, air conditioning, AM/FM radio, Firestone air pressure gauge, white exterior, black interior, cloth. Certificate and Decal Valid to April 2024. $33,720.00 plus $375 processing fee, $34,095.00 total payment obligation before taxes. Listing report, warranty, contract commitment cancellation fee, financing available on approved credit (some limitations and exceptions may apply). All above specifications and information is considered to be accurate but is not guaranteed and no opinion or advice is given as to whether this item should be purchased. We do not allow test drives due to theft, fraud and acts of vandalism. Instead we provide the following benefits: Complimentary Warranty (with options to extend), Limited Money Back Satisfaction Guarantee on Fully Completed Contracts, Contract Commitment Cancellation, and an Open-Ended Sell-Back Option. Ask seller for details or call 604-522-REPO(7376) to confirm listing availability.
-
5
2017 Ford F-550 12 Foot Armoured Cube Truck With Bullet-Proof Glass And Power Tailgate, 6.8L V10 SOHC 30V engine, 10 cylinder, 2 door, automatic, RWD, cruise control, air conditioning, AM/FM radio, backup camera , in cab camera, power door locks, power mirrors, blue exterior, black interior, cloth. Inside dimensions: 12 feet long by 8 feet wide by 6 feet high. Door clearance is 5 feet 5 inches. Overall height is 9 feet 6 inches. All measurements are considered accurate however not guaranteed. Certificate and Decal Valid to Jan 2023. $51,740.00 plus $375 processing fee, $52,115.00 total payment obligation before taxes. Listing report, warranty, contract commitment cancellation fee, financing available on approved credit (some limitations and exceptions may apply). All above specifications and information is considered to be accurate but is not guaranteed and no opinion or advice is given as to whether this item should be purchased. We do not allow test drives due to theft, fraud and acts of vandalism. Instead we provide the following benefits: Complimentary Warranty (with options to extend), Limited Money Back Satisfaction Guarantee on Fully Completed Contracts, Contract Commitment Cancellation, and an Open-Ended Sell-Back Option. Ask seller for details or call 604-522-REPO(7376) to confirm listing availability.
-
6
2007 International 4300, standard transmission, with DT466 245 HP Cummins Diesel engine. 16' long Arbortec forestry dumping chip box with through storage compartments and extra long compartment for pole saws, long extensions, etc.
-
7
2015 International WorkStar 7600 6X4 Dump Truck With Plow/Spreader Air Brakes Diesel 6 cylinder engine, 2 door, automatic, 6X4, air conditioning, AM/FM radio, power door locks, power windows, power mirrors, max a/c, air seats, air horn, aux, usb, retarder, off road mode, pal love, differential lock, PTO, parkd regen, blue and amber lights, spreader, belly plow, winter intake, Rexroth controller, plow controller, hydraulic dump box, front plow attachment, de ice spreader, battery switch, yellow exterior, grey interior, cloth. Engine Hours: 9248 Front Plow is currently in the box. Certification and decal valid until July 2024. $78,810.00 plus $375 processing fee, $79,185.00 total payment obligation before taxes. Listing report, warranty, contract commitment cancellation fee, financing available on approved credit (some limitations and exceptions may apply). All above specifications and information is considered to be accurate but is not guaranteed and no opinion or advice is given as to whether this item should be purchased. We do not allow test drives due to theft, fraud and acts of vandalism. Instead we provide the following benefits: Complimentary Warranty (with options to extend), Limited Money Back Satisfaction Guarantee on Fully Completed Contracts, Contract Commitment Cancellation, and an Open-Ended Sell-Back Option. Ask seller for details or call 604-522-REPO(7376) to confirm listing availability.
-
8
2007 Sterling SC8000 Road Patcher Truck With Air Brakes Diesel, 5.9L L6 DIESEL engine, RWD, cruise control, air conditioning, AM/FM radio, CD player, white exterior, black interior, cloth. Certification and Decal valid until September 2022. $21,010.00 plus $375 processing fee, $21,385.00 total payment obligation before taxes. Listing report, warranty, contract commitment cancellation fee, financing available on approved credit (some limitations and exceptions may apply). All above specifications and information is considered to be accurate but is not guaranteed and no opinion or advice is given as to whether this item should be purchased. We do not allow test drives due to theft, fraud and acts of vandalism. Instead we provide the following benefits: Complimentary Warranty (with options to extend), Limited Money Back Satisfaction Guarantee on Fully Completed Contracts, Contract Commitment Cancellation, and an Open-Ended Sell-Back Option. Ask seller for details or call 604-522-REPO(7376) to confirm listing availability.
-
9
2019 CAT 306E2 Excavator Diesel, 1 door, Cat C2.4 efficient Di turbo engine, high digging force, fast cycle time, pilot controls and a load sensing hydraulic system, new air hose routing, 46.5 HP, viscous cab mounting system, low counter weight that extends to. two sides of the machine improving the stability, blade is standard with additional float function, Yellow exterior, black interior, cloth. $51,810.00 plus $375 processing fee, $52,185.00 total payment obligation before taxes. Listing report, warranty, contract commitment cancellation fee. All above specifications and information is considered to be accurate but is not guaranteed and no opinion or advice is given as to whether this item should be purchased. We do not allow test drives due to theft, fraud and acts of vandalism. Instead we provide the following benefits: Complimentary Warranty (with options to extend), Limited Money Back Satisfaction Guarantee on Fully Completed Contracts, Contract Commitment Cancellation, and an Open-Ended Sell-Back Option. Ask seller for details or call 604-522-REPO(7376) to confirm listing availability.
-
10
2011 Ford F-550 SuperCab 10 Foot Flat Deck 4WD Diesel, 6.7L V8 OHV 16V DIESEL engine, 8 cylinder, diesel, 4 door, automatic, 4WD, cruise control, air conditioning, AM/FM radio, CD player, power door locks, power windows, power mirrors, white exterior, grey interior, cloth. Deck size: 10 Feet Long by 8 Feet Wide (Engine Noise, Engine Knock). $19,510.00 plus $375 processing fee, $19,885.00 total payment obligation before taxes. Listing report, warranty, contract commitment cancellation fee, financing available on approved credit (some limitations and exceptions may apply). All above specifications and information is considered to be accurate but is not guaranteed and no opinion or advice is given as to whether this item should be purchased. We do not allow test drives due to theft, fraud and acts of vandalism. Instead we provide the following benefits: Complimentary Warranty (with options to extend), Limited Money Back Satisfaction Guarantee on Fully Completed Contracts, Contract Commitment Cancellation, and an Open-Ended Sell-Back Option. Ask seller for details or call 604-522-REPO(7376) to confirm listing availability.
-
11
2012 International TerraStar Flat Deck Dually Diesel, 6.4L V8 DIESEL engine, 8 cylinder, 2 door, automatic, 4X2, cruise control, air conditioning, AM/FM radio, power door locks, power windows, power mirrors, white exterior, Engine Hours 13390 hours, Back Up Camera, 6 brand new tires, $6700 service completed October 2023, Measurements: Deck Length - 11 foot 10 inches. Certificate and Decal Valid to October 2024. $17,510.00 plus $375 processing fee, $17,885.00 total payment obligation before taxes. Listing report, warranty, contract commitment cancellation fee, financing available on approved credit (some limitations and exceptions may apply). All above specifications and information is considered to be accurate but is not guaranteed and no opinion or advice is given as to whether this item should be purchased. We do not allow test drives due to theft, fraud and acts of vandalism. Instead we provide the following benefits: Complimentary Warranty (with options to extend), Limited Money Back Satisfaction Guarantee on Fully Completed Contracts, Contract Commitment Cancellation, and an Open-Ended Sell-Back Option. Ask seller for details or call 604-522-REPO(7376) to confirm listing availability.
-
12
The brand new TC-12 Tree Chipper from DuraTech incorporates the grinding technology found in its large tub and horizontal grinders.
It is equipped with a 129 hp (96 kw) CAT C4.4 diesel engine or a Kubota V3800 88 hp (74 kw) and PT-Tech clutch, enabling it to efficiently grind trees and limbs with a diameter of up to 12 inches.
The TC-12 offers several features including a spring-loaded feed wheel with adjustable down pressure, an optional height sensor that automatically adjusts the feed roller to match the material size, an optional hydraulic gathering winch, and innovative hopper safety bars that allow for easy and instant feed wheel shut off.
This heavy-duty chipper is available with either a pintle or ball hitch and is compact enough to be easily towed to any location.
Get chipping today with the new TC-12 Wood Chipper!
-
13
NEW Sure Marine REAL hydronic air handler (bus heater) $275
10, 250 btu heater with fan and two ducts. Takes heat from engine cooling water. Great for heating cabin or cockpit while motoring. 'Free' heat ! Brand new, in box, complete with all fittings, ducts, and hose. Sure Marine currently sells this for $487-518 USD,
-
14
2004 Duratech 3010
Pintle Hitch Tub Grinder- Only 6100 hours
- C-15 Cat 475 hp Tier 3 no emissions
- 27’ swing conveyor with magnet.
- Newly rebuilt clutch, new clutch control
- New belly belt, new stacker belt.
- New shanks and teeth.
- Well-maintained Tub Grinder that works every day
- Just went through the shop and is field ready.Paint is fair, but mechanically this machine is in great shape. Will be installing a new tub flare over the next couple of weeks.
Financing available and can ship anywhere.
-
15
Suzuki 2.5 hp 4 stroke outboard, very low hours
2006 Suzuki 2.5 4 stroke, used infrequently on my tender as I prefer to row. Oil changed regularly, drained of fuel each season, and regularly maintained. 28 ibs dry weight, sips gas. I no longer need it. Runs smoothly.
-
16
The brand new TC-12 Tree Chipper from DuraTech incorporates the grinding technology found in its large tub and horizontal grinders.
It is equipped with a 129 hp (96 kw) CAT C4.4 diesel engine or a Kubota V3800 88 hp (74 kw) and PT-Tech clutch, enabling it to efficiently grind trees and limbs with a diameter of up to 12 inches.
The TC-12 offers several features including a spring-loaded feed wheel with adjustable down pressure, an optional height sensor that automatically adjusts the feed roller to match the material size, an optional hydraulic gathering winch, and innovative hopper safety bars that allow for easy and instant feed wheel shut off.
This heavy-duty chipper is available with either a pintle or ball hitch and is compact enough to be easily towed to any location.
Get chipping today with the new TC-12 Wood Chipper!
Priced in CAD
-
17
Brand new factory engine GM small block V-8 currently with 1 hour on it. Mercruiser 383 Mag/stroker 350 hp with Bravo 3 leg. Freshwater cooled. Twin prop. She performs like a dream. Your opportunity to break her in.
30 foot length overall with a 10 foot beam. New sunbrella canvas and strata glass 2 years ago. New transom seal 2 years ago. Newer Raymarine onboard electronics for navigation. 2 X 175 Watt solar panels and MPPT controller installed last year. All receipts available.
Microwave, cooktop and sink in galley. Also small tv. Other electronics available on request. V berth sleeps 2 comfortably with memory foam under original mattress. Table in cabin converts to bed for kids. Double bed in cutty under the cockpit. Manual head with handheld shower. Transom shower for washing off the salt water after swimming.
For more information or to request a viewing please email me. Serious inquiries only please.
-
18
Duratech HD12 “Big Bite” w/ grapple loader
- Cat 3412 (12 cylinder) 700 hp, with less than 1200 hours - 12’ tub, 27’ stacking conveyor. - 90% of the hoses were changed on the grinder, as well as 95% of the hoses were just recently changed on the loader. - Brand new shanks and teeth. - New conveyor belts. - Recently re-painted. - Very well maintained low hour grinder - Just went through our shop and is ready to be put to work.
Can be delivered to the US.
-
19
2004 3010 Duratech Tub Grinder
- Comes with a 5th wheel hitch
- 475 horsepower
- C-15 Cat, with only 3100 hours
- 10’ Tub
- New belly and stacker belts
- New shanks
- Remote control
- 27’ swing conveyor$239,999 CND
Please feel free to contact me with any questions or concerns
-
20
This classic 1985 Bluewater Costal Cruiser 51C will be right at home cruising inland waterways and lakes or costal ocean waters.
The lower profile stands out against trawlers and aft cabin cruisers of a similar size and makes boarding the boat from the dock a simple walk on vs. climbing ladders. The 14.5ft. beam creates a wealth of interior space all throughout the boat as well.
A lot of real estate on the water
An Ideal Live Aboard or Charter Yacht, with her great charter history.
Tom Cruise, Jack Nicholson and Tommy lee Jones signed the guest log while chartering this yacht!
Charters at $1200 a day.
Yachts rails raised in refit to comply with safety compliance.
Two Stateroom configuration with Two ensuite electric heads and showers with a Bathtub in Master stateroom.
Her Thick Fiberglass hull is ideal for beaching in shallow water as she only drafts 24” of water allowing for ladder access points at both the bow and stern.With 35feet of upper deck, upper deck and main salon.
New Radio/Bluetooth sound systems
New Lithium-Ion House batteries
New inverter/charging system
Two – 30 Amp shore power inlets
Shorepower cords and Y adaptorEngine 1
Engine Make CRUSADER
Engine Model Model 350 - 454 CI
Total Power 350hp
Engine Hours 2787 HRS
Engine Type Inboard Fresh Water cooled
Drive Type Direct Velvet Drives
Fuel Type Gas
Engine 2
Engine Make CRUSADER
Engine Model Model 350 - 454 CI
Total Power 350hp
Engine Hours 1933 HRS
Engine Type Inboard Fresh Water cooled
Drive Type Direct Velvet Drives
Fuel Type GasTwin Chevy (Crusader) 454 FRESH WATER COOLED V8 main engines with velvet drives running conventional shafts and propellers and tunnel drives.
Halon Fire suppression system in engine compartment Engines:
Depth finder
VHF marine radio
Chart Plotter
Other features:
Ice Maker
Large leather sofa Hide a bed
Full size residential fridge
Double stainless sink
Electric stove
20 gallon water heater
All aluminum tanks
SPECIFICATIONS
Speed & Distance
Cruising Speed 12kn
Max Speed 18kn
Dimensions
Length Overall 51ft
Max Draft 2ft
Beam 14ft
Weights
Dry Weight 26,000Lb
Miscellaneous
Windlass Electric Windlass
Electrical Circuit 12V
Tanks
Fresh Water Tank 1 X 100 Gal ()
Fuel Tank 1 X 320 Gal ()
Holding Tank 1 X 65 Gal ()
Accommodations
Double Berths 2
Cabins 2
Heads 2Currently in the beautiful Gulf Islands British Columbia / Salt Spring Island
-
21
Duratech HD12 “Big Bite” w/ grapple loader
- Cat 3412 (12 cylinder) 700 hp, with less than 1200 hours
- 12’ tub, 27’ stacking conveyor.
- 90% of the hoses were changed on the grinder, as well as 95% of the hoses were just recently changed on the loader.
- Brand new shanks and teeth.
- New conveyor belts.
- Recently re-painted.
- Very well maintained low hour grinder
- Just went through our shop and is ready to be put to work.Price is in CND Dollars.
Can be delivered to the US.
-
22
3 - Unused off shore - 385 R22.5 Floater Tires
$300 Each
Treads do not match
-
23
389 Tandem Sleeper Semi with 72in Sleeper - ISX 550HP 18 Spd 2050 Torque Super 40s - Full Lockers Sliding 5th Wheel Stock #:5210 Exterior Colour:Silver with White Striping Engine:Cummins ISX Horsepower:550 Transmission:18 Spd Front Axle:13,200 Rear Axle:Super 40s Gear Ratio:3.73 Frame:3/8s Brakes:Jake Suspension:Low Air Leaf Wheelbase:244.0 Mileage: 544K Miles / 875,483 Km ISX 550HP, 18 Spd, 13,200 x Super 40s Axles, Fully Loaded 72in Sleeper Cab with AM / FM / CD / NAV, Power Windows / Locks / Mirrors, Leather Seats, Full Gauge Package, Power Group, Full Lockers, Chain Hangers, Fenders, Sliding 5th Wheel, 544K Miles, Loaded!
Engine: CUMMINS ISX
Other Equipment- 1/4 Fenders|AM/FM/CD|Full Gauge Package|Full Lockers|GPS Navigation System|Leather Seats|Power Door Locks|Power Mirrors|Power Windows|Sliding 5th Wheel
-
24
367H Extended Day Cab Tri Drive - X15 565 HP 18 Spd - 2050 Torque 20K Front Axle Double Frame - Warranty till 2025 Stock #:5215 Exterior Colour:White with Black Striping Engine:Cummins X15 Horsepower:565 Transmission:18 Spd Front Axle:20,000 Rear Axle:69,000 Gear Ratio: 4.30 Frame: Double Brakes: Jake Suspension:Neway Wheelbase:268.0 Mileage: 292K Miles / 469,927 Km Cummins X15 565 HP, 18 Spd, 20x69 Axles, Power Group, Full Lockers, Power Windows / Mirrors / Locks, AM / FM / CD/NAV, Leather Seats, 23ft + of Clean Frame, Double Frame, Engine/AFT/Trans/Clutch/Diff Warranty Still Remaining, Loaded Unit, 292K Miles, Beauty!
Engine: CUMMINS X15
Other Equipment- AM/FM/CD|Full Lockers|GPS Navigation System|Leather Seats|Power Door Locks|Power Mirrors|Power Windows
-
25
T880 Tri Drive Day Cab - X15 565HP 2050 Torque 20K Front Axle Double Frame Full lockers Stock #:5220 Exterior Colour: Metallic Grey / Silver Fenders Engine:Cummins X15 Horsepower:565 Transmission:18 Spd Front Axle:20,000 Rear Axle:69,000 Gear Ratio: 4.30 Frame:Double Brakes:Jake Suspension:Neway Wheelbase:272.0 Mileage: 263K Miles / 423,257 Km X15 565 HP, 18 Spd, 20,000 x 69,000 Axles, Full Lockers, Power Group, Fully Loaded Interior with AM / FM / CD / NAV, Power Windows / Locks / Mirrors, Leather Seats, Off Road ABS, 25+ Feet of Clean Frame, 263K Miles, Beauty.
Engine: CUMMINS X15
Other Equipment- AM/FM/CD|Full Lockers|GPS Navigation System|Leather Seats|Power Door Locks|Power Mirrors|Power Windows
-
26
579 Tandem Axle Day Cab - 455 HP 13 Spd Auto - Full Lockers Sliding 5th Wheel Stock #:5192 Exterior Colour:White Engine:Paccar MX13 Horsepower:455 Transmission:13 Spd Auto Front Axle:13,200 Rear Axle:40,000 Gear Ratio: 3.70 Frame:3/8 Brakes:Jake Suspension:Low Air Leaf Wheelbase:196.0 Mileage: 360K Miles / 579,363 Km MX13 455 HP, 13 Spd Auto, 13,200 x 40,000, with AM / FM / CD, Bluetooth, Power Windows, Mirrors, Locks, Sliding 5th Wheel, Fenders, Chain Hangers Full Lockers, Power Group, Multiple Units Available, Beauty, 360K Miles.
Engine: Paccar MX13
Additional Options- 1/4 Fenders|AM/FM/CD|Bluetooth|Full Lockers|Power Door Locks|Power Mirrors|Power Windows|Sliding 5th Wheel
-
27
INEW COM M802 complete SSB package for offshore sailboat - read below for details
I purchased this for a boat project that did not happen and now it is time to let it go. The system consists of the following, all of which is brand new and never installed. All packages but one are unopened:
ICOM M802 unit consisting of tuning head, microphone, external speaker, and SSB unit ($1900 USD at West Marine)
GAM-MCKIM split lead antenna which slides up backstay without need for insulators or cutting backstay. Sells in usd for $465 at Seatech systems.
ICOM AT-140 automatic tuner, new in unopened box. Defender sells for $615USD
ICOM proprietary cabling to connect AT140 to SSB unit. Defender sells for $70USD
KISS SSB ground plane to use in lieu of under water ground plate ( ie no haulout needed to install). Seatech systems sells at $189USD.Value in $CAD: $4392
Asking price for complete kit: $2575 OBO
If you have your HAM license, ICOM will give you a code to open up the HAM bands for free.
-
28
NEW Sure Marine REAL hydronic air handler (bus heater) $275
10, 250 btu heater with fan and two ducts. Takes heat from engine cooling water. Great for heating cabin or cockpit while motoring. 'Free' heat ! Brand new, in box, complete with all fittings, ducts, and hose. Sure Marine currently sells this for $487-518 USD,
-
29
Questus 400G self levelling radar mount for sailboat backstay, NEW, $750
I purchased this new for an offshore project boat that didn't happen. This is best of class, heavy cast aluminum, rated for offshore hurricanes. Current price from Questus Marine Inc in Peabody Mass. is $1999 USD (gulp!) All mounting hardware, install manual, etc included. Brand new, been in dry storage. Go offshore with the best!
-
30
Davis Echomaster Aluminum Radar Reflector, used, $55/
compare to $148.99 plus tax new from local chandlery
Anchor Fender Step White, like new, $45
compare to $109.99 plus tax from local chandlery
Lewmar 15 kg galvanized claw (Bruce Style) anchor, new, $100
Compare at $280 plus tax at Trotac
Origo gimbal set, new, never installed, $100
compare at $149.99 plus tax USD at West Marine
Origo pot & pan holders, set of 2, new, $45
compare at $200+ on E-Bay
Nova Kool Ice Box Conversion kit model LT201, in box, new, $995
compare at $1399 plus tax at Steveston Marine
Dickinson 3”X22” Flue Guard, like new, $40
Compare at $102.95 plus tax at Steveston Marine
Lofrans Royal Manual windlass, excellent condition, no visible wear on gypsy or unit, $475
Compare at $1190 plus tax at the chandlery online.
Ships bell, cast brass, 7 inch diameter, excellent condition, $45
Compare at $140.21 plus tax at Chandlery online
West Marine Serving/Cutting/Filleting board, fits on coaming, hinged, new in box, $45
Compare at $150.99 plus tax at Chandlery online
Lewmar 2 speed size 40 standard aluminum winches, little use, serviced and ready to use, $150 each, 2 available
Hammock, cotton, blue and white, never used, $10
Brass trawler lamp, made in Holland by Den Han, excellent condition, $125
Compare at $349 at binnacle.com
Galley mixing faucet, solid brass construction, white finish, tall spout, folding and swivelling, by Barka of Italy, never installed, $45
Compare at $123.99 at binnacle.ca
Deck access hatch, white ABS, locking, Rough opening 10 ¾ x 27 ½, total footprint 13”x30”, can be used vertically or horizontally, rubber surface, non-skid surface, never installed - $50
¼” smoked cast acrylic for replacing crazed hatches, one piece of new, 48” X 39” ( 13 sf ) $125
and 4 pieces cut for exterior fixed portlights for a Mirage 33/35: 2 – approx. 10.5”x42” and 2- 10.5X37” - @ $25 each
Contact me with your questions!
-
31
Thunderbird For Sale Dodo #117 (previously J-Bird) is located at RVYC Jericho in Vancouver BC. $ 5,000 CAD This is an awesome boat that needs a new home. I no longer have the time to maintain this boat and I don’t want to see it deteriorate. It needs a bit of work but nothing major. The cockpit hatches need to be redone and the brightwork needs updating, etc. If you happen to know anything about this boat's past I'd love to hear about it. Dodo was saved during a 2021 refit. Three of the four chainplates and a forward cleat had rotted the hull and deck. During the refit, all of the rotted wood was removed, patched and reinforced. The boat is structurally sound. Sails: 2x Mainsails 1x Genoa 2x Jibs 2x Spinnakers Everything else: 8hp 1990s Evinrude 2 Stroke 60L Aluminum Fresh Water Forced Air Diesel Heater (75% installed, propane heater in the interior picture is not included with the boat) Running Rigging: Synthetic braid internal to mast Ground Tackle: 7.5 kg. Bruce claw anchor with 20 feet 3/8” chain and 150 feet ½” gold braid rode Self Contained Toilet plumbed with "Y" valve VHF Radio Knot Meter Depth Sounder Electric Bilge Pump: electric with float switch Manual Bilge Pump: Whale Gusher manual bilge pump with foot valve Galley: 2 burner propane cooktop with integrated sink with flip up faucet Windows replaced in 2020
-
32
30 yds 60" Navy Blue Sunbrella $995
This was purchased about 18 months ago for a project that is now not going to happen. It is a single piece, in a roll, exactly as it came from the supplier. Save yourself a fortune and make your own dodger, bimini, helm, winch, and hatch covers!
-
33
- Very good condition
- 1 x standard sail (old), 1 x Intensity Sails radial
- 1 x standard, 1 x radial bottom mast sections
- 2 x top sections
- board bag
- spar bag
- boat cover
- Dynamic dolly
- wind indicator
- Analog compass
- race ready, all required blocks and sheets
-
34
Colorado XT pontoon boat purchased in 2023, used up to 5 times, comes with 2 rod holders (and only 1 rod holder out of the box), oars, swivel seat, 2 tackle bags, anchor system and folding wheel!
Excellent condition, ready for fishing!
-
35
This classic 1985 Bluewater Costal Cruiser 51C will be right at home cruising inland waterways and lakes or costal ocean waters.
The lower profile stands out against trawlers and aft cabin cruisers of a similar size and makes boarding the boat from the dock a simple walk on vs. climbing ladders. The 14.5ft. beam creates a wealth of interior space all throughout the boat as well.
A lot of real estate on the water
An Ideal Live Aboard or Charter Yacht, with her great charter history.
Tom Cruise, Jack Nicholson and Tommy lee Jones signed the guest log while chartering this yacht!
Charters at $1200 a day.
Yachts rails raised in refit to comply with safety compliance.
Two Stateroom configuration with Two ensuite electric heads and showers with a Bathtub in Master stateroom.
Her Thick Fiberglass hull is ideal for beaching in shallow water as she only drafts 24” of water allowing for ladder access points at both the bow and stern.With 35feet of upper deck, upper deck and main salon.
New Radio/Bluetooth sound systems
New Lithium-Ion House batteries
New inverter/charging system
Two – 30 Amp shore power inlets
Shorepower cords and Y adaptorEngine 1
Engine Make CRUSADER
Engine Model Model 350 - 454 CI
Total Power 350hp
Engine Hours 2787 HRS
Engine Type Inboard Fresh Water cooled
Drive Type Direct Velvet Drives
Fuel Type Gas
Engine 2
Engine Make CRUSADER
Engine Model Model 350 - 454 CI
Total Power 350hp
Engine Hours 1933 HRS
Engine Type Inboard Fresh Water cooled
Drive Type Direct Velvet Drives
Fuel Type GasTwin Chevy (Crusader) 454 FRESH WATER COOLED V8 main engines with velvet drives running conventional shafts and propellers and tunnel drives.
Halon Fire suppression system in engine compartment Engines:
Depth finder
VHF marine radio
Chart Plotter
Other features:
Ice Maker
Large leather sofa Hide a bed
Full size residential fridge
Double stainless sink
Electric stove
20 gallon water heater
All aluminum tanks
SPECIFICATIONS
Speed & Distance
Cruising Speed 12kn
Max Speed 18kn
Dimensions
Length Overall 51ft
Max Draft 2ft
Beam 14ft
Weights
Dry Weight 26,000Lb
Miscellaneous
Windlass Electric Windlass
Electrical Circuit 12V
Tanks
Fresh Water Tank 1 X 100 Gal ()
Fuel Tank 1 X 320 Gal ()
Holding Tank 1 X 65 Gal ()
Accommodations
Double Berths 2
Cabins 2
Heads 2Currently in the beautiful Gulf Islands British Columbia / Salt Spring Island
-
36
NEW Nova Kool LT201 Icebox conversion kit $995
I bought this for a project boat that didn't happen, and never took it out of the box. It is low power usage, and sells for approx $1399 plus tax at local chandleries. Everything is included in this kit to turn an icebox into a very efficient refrigerator/freezer. See expanded photo below.
-
37
The brand new TC-12 Tree Chipper from DuraTech incorporates the grinding technology found in its large tub and horizontal grinders.
It is equipped with a 129 hp (96 kw) CAT C4.4 diesel engine or a Kubota V3800 88 hp (74 kw) and PT-Tech clutch, enabling it to efficiently grind trees and limbs with a diameter of up to 12 inches.
The TC-12 offers several features including a spring-loaded feed wheel with adjustable down pressure, an optional height sensor that automatically adjusts the feed roller to match the material size, an optional hydraulic gathering winch, and innovative hopper safety bars that allow for easy and instant feed wheel shut off.
This heavy-duty chipper is available with either a pintle or ball hitch and is compact enough to be easily towed to any location.
Get chipping today with the new TC-12 Wood Chipper!
-
38
The brand new TC-12 Tree Chipper from DuraTech incorporates the grinding technology found in its large tub and horizontal grinders.
It is equipped with a 129 hp (96 kw) CAT C4.4 diesel engine or a Kubota V3800 88 hp (74 kw) and PT-Tech clutch, enabling it to efficiently grind trees and limbs with a diameter of up to 12 inches.
The TC-12 offers several features including a spring-loaded feed wheel with adjustable down pressure, an optional height sensor that automatically adjusts the feed roller to match the material size, an optional hydraulic gathering winch, and innovative hopper safety bars that allow for easy and instant feed wheel shut off.
This heavy-duty chipper is available with either a pintle or ball hitch and is compact enough to be easily towed to any location.
Get chipping today with the new TC-12 Wood Chipper!
Priced in CAD
-
39
30 yds 60" Navy Blue Sunbrella $995
This was purchased about 18 months ago for a project that is now not going to happen. It is a single piece, in a roll, exactly as it came from the supplier. Save yourself a fortune and make your own dodger, bimini, helm, winch, and hatch covers!
-
40
- Very good condition
- 1 x standard sail (old), 1 x Intensity Sails radial
- 1 x standard, 1 x radial bottom mast sections
- 2 x top sections
- board bag
- spar bag
- boat cover
- Dynamic dolly
- wind indicator
- Analog compass
- race ready, all required blocks and sheets
-
41
Duratech HD12 “Big Bite” w/ grapple loader
- Cat 3412 (12 cylinder) 700 hp, with less than 1200 hours - 12’ tub, 27’ stacking conveyor. - 90% of the hoses were changed on the grinder, as well as 95% of the hoses were just recently changed on the loader. - Brand new shanks and teeth. - New conveyor belts. - Recently re-painted. - Very well maintained low hour grinder - Just went through our shop and is ready to be put to work.
Can be delivered to the US.
-
42
Colorado XT pontoon boat purchased in 2023, used up to 5 times, comes with 2 rod holders (and only 1 rod holder out of the box), oars, swivel seat, 2 tackle bags, anchor system and folding wheel!
Excellent condition, ready for fishing!
-
43
2004 3010 Duratech Tub Grinder
- Comes with a 5th wheel hitch
- 475 horsepower
- C-15 Cat, with only 3100 hours
- 10’ Tub
- New belly and stacker belts
- New shanks
- Remote control
- 27’ swing conveyor$239,999 CND
Please feel free to contact me with any questions or concerns
-
44
Duratech HD12 “Big Bite” w/ grapple loader
- Cat 3412 (12 cylinder) 700 hp, with less than 1200 hours
- 12’ tub, 27’ stacking conveyor.
- 90% of the hoses were changed on the grinder, as well as 95% of the hoses were just recently changed on the loader.
- Brand new shanks and teeth.
- New conveyor belts.
- Recently re-painted.
- Very well maintained low hour grinder
- Just went through our shop and is ready to be put to work.Price is in CND Dollars.
Can be delivered to the US.
-
45
NEW Nova Kool LT201 Icebox conversion kit $995
I bought this for a project boat that didn't happen, and never took it out of the box. It is low power usage, and sells for approx $1399 plus tax at local chandleries. Everything is included in this kit to turn an icebox into a very efficient refrigerator/freezer. See expanded photo below.
-
46
Dosen Diesel Powered Light Tower
-
47
EXCAVATOR
BRAND NEW 175 HYDRAULIC HORSEPOWER SHEET PILE DRIVER QUALITY BUILT IN THE NETHERLANDS FROM A COMPANY THAT HAS BEEN BUILDING ATTACHMENTS FOR 25 PLUS YEARS
360 DEGREE CONTINUOUS ROTATION - LOCKING SHEET PILE CLAMP SYSTEM TO SECURE FOR PICKING AND DRIVING PILES
AND FOR PULLING PILES OFFERING:
85 TONS OF ECCENTRIC FORCE
75 TONS OF VIBRATION FORCE
FREQUENCY OF 2800
HYDRAULIC PRESSURE - 320 BAR
HYDRAULIC FLOW 260 LPM
2 LARGE ECCENTRICS AND 12 VIBRATION ISOLATORS
175 HYDRAULIC HORSEPOWER SHEET PILE DRIVER AT THE HEAD POWERED BY EXCAVATOR AUXILARY HYDRAULIC CIRCUIT - NO REMOTE POWER PACKS REQUIRED
EXCAVATOR CLASS 45-65 TON
EXTENSION ARM WEIGHT 800 KG
COMES COMPLETE WITH ALL HOSES AND THE EXTENSION ARM
THIS IS SET UP BUSHED DOWN WITH 100 MM PINS - BUT SET UP TO TAKE 110 - 120 MM PINS
WE BOUGHT TO PUT ON OUR LONG REACH CUSTOM BUILT 1.3 MILLION PC450LC-8 TO TO REPLACE LARGE CRANES TO DRIVE 40-50-60 SHEET PILES IN TIGHT LOCATIONS
THIS MACHINE CAN DRIVE 40-50-60 FOOT SHEETS PILE REPLACES LARGE CRANE MOUNTED UNITS WITH POWERPAK HYDRAULIC UNITS AND REDUCES YOUR CREW FROM A 4 OR 5 MAN CREW TO 2 AND WILL DRIVE 4 TIMES AS MANY SHEETS PER HOUR PLUS READY TO DRIVE PILES 1/2 HOUR AFTER ARRIVING ON-SITE NOT A DAY LIKE CRANES AND WILL WORK IN TIGHT LOCATION AND SWAMP GROUND JUST USING WOOD PADS IF REQUIRED
MACHINE THEN CAN BE USED ON THE JOB FOR ALL EXCAVATOR WORK REQUIRED - THEN REMOVE THE SHEET PILES WHEN THE EXCAVATION IS DONE - NO SECOND MACHINE REQUIRED - THIS MACHINE WAS PUT TOGETHER FOR A LARGE JOB IN SWAMPY GROUND FOR BUILDING A BRIDGE WHERE THERE WERE 40 FOUNDATIONS THAT WERE 30 FEET WIDE X 50 LONG THAT AFTER DRVING THE SHEETS NEEDED TO BE EXCAVATED TO A DEPTH OF 20 FEET - BUT DUE TO COVID THAT JOB WAS PUT AND REMAINS ON HOLD.
THIS IS NOT A SPAGETTI BOOM LONG REACH - USE LARGE 12000 ft lb HYDRAULIC HAMMERS - 10,000 LB HYDRAULIC DEMOLITION PROCESSORS - GRAPPLES - HYDRAULIC DUAL DRUM GRINDERS - PLATE COMPACTORS - DIG WITH VARIOUS BUCKETS UP TO 4 YARDS ALL WITH ONE MACHINE
OR TAKE THIS SHEET PILE UNIT FOR $125,000.00 AND WE HAVE A PROFESSIONAL APPRAISAL ON IT FOR $220,000.00 - SINCE THAT APPRAISAL STEEL AND COST OF MANUFACTURING HAVE ALL INCREASED DRAMATICALLY
HAVE FACTORY INSTALLATION AND PARTS AND OPERATOR'S MANUAL
OR FOR SALE WITH THE KOMATSU LONG REACH FOR $500,000 - SEE MY OTHER ADS FOR THIS VERSATILE MACHINE READY TO WORK NOW WITH THIS SHEET PILE HEAD
FRANK 604-476-7777
FROM THE HYDRARAM WEBSITE:
Hydraram, we bring the muscle!
Hydraram has been producing attachments for use in demolition, recycling and green industry for over 25 years.
We supply a complete line of hydraulic attachments for excavators from 1 to 300 tons.
We specialize in all hydraulic attachments for all types of excavators.
The Hydraram products stand for quality, durability and productivity! Hydraram attachments are used around the world every day by many international companies in the the civil engineering sector, demolition, scrap processing, as well as recycling and forestry companies.
We sell our equipment through an extensive dealer network which provides perfect service. Because of this, we are able to help you choose the right attachment, and receive perfect after-sales support, maintenance and repairs.
With us you are at the right place for:
* New attachments
* Used attachments
* Rental (by HYDRARENT)
* Service & maintenance
* Repairs
* New & used partsWe always have the correct type of attachment. They are of high quality, durable, and always made to match your needs and requirements. Keeping attachments in stock helps us keep shipping times as short as possible.
NOTE: The Appraisal Shown in Image 6 does not take into account the cost of the New $150,000.00 Factory Komatsu Log Loader Boom c/w pins and cylinders or the cost of Importing the HydraRam Sheet Pile Driver from Europe or the $200,000.00 plus spent to complete the machine to its current finished state.
-
48
THIS BRAND NEW NEVER INSTALLED BUCKET DOES IT ALL WITHOUT CHANGING BUCKETS - MAKES A THUMB OBSOLETE AND WORKS THRU THE ENTIRE BUCKET ROTATION -SEE YOUTUBE VIDEOS:
https://youtube.com/watch?v=VYxdToqeleI
https://youtu.be/BV5EeyGm5OM
APPLICATIONS :
FORESTRY • PIPELINE • ROAD BUILDING • RIPRAP • MINING • DEMOLITION • MARINE/DREDGING
WASTE MANAGEMENT • SOIL REMEDIATION • SCREENING • TRUCK LOADING FOR ALL MATERIALSEXCAVATOR CLASSES FOR THIS 60 INCH XHAND WILL FIT ALL 200 / 250 / 300 - CURRENTLY SETUP WITH WBM LUGGING FOR 200-240 CLASS MACHINES
TAKE THIS $60,000.00 PLUS BUCKET FOR $30,000.00 AND HAVE WORKING NOW - NOT WAIT 4 MONTHS TO HAVE ONE BUILT
WE SHIP QUICKLY AND GET GREAT RATES
FRANK 604-476-7777 OR TOLL FREE 1- (833) 693-9323
ONLY REQUIRES 1 HAMMER OR HOEPACK HYDRAULIC CIRCUIT AND JOY STICK ELECTRIC CONTROL TO RUN AS CONTROLLEDS BY DAN FOSS VALVES.
DIGGING: Digging and clean-up capabilities in ONE attachment - SEE VIDEO
https://youtu.be/dkm0dxBI5BU
ROAD BUILDING -
https://youtu.be/DSooBNHheLs
DOZING Moving material forward and back, with double edge grading functionality - SEE VIDEO
https://youtu.be/5-girnvgBr0
SHOVEL LOADING Forward loading from the ground up for increased efficiency - SEE VIDEO
https://youtu.be/hifN_8J5n5M
GRABBING Full-width double-sided grabbing for maximum productivity - SEE VIDEO
https://youtu.be/95FmPIOywA4
SCREENING Filtering debris using both screening surfaces, saving time and money
https://youtu.be/a3-0p5oB5ko
PILING BRUSH - MOVING LOGS -
https://youtu.be/zQbNwrE5Y3c
EXCAVATOR CLASSES FOR THIS 60 INCH XHAND 200 / 250 / 300
SCREEN SIZE OPTIONS - 3″
After attending the Canada North Resources Expo held in Prince George on May 26th and 27th, 2017; XHand Inc. was featured as a noteworthy exhibitor at the event.
A highlight video was produced, speaking with XHand Inc. President, Dean Perrey.
Logging and Sawmilling JournalMay 2017 – Prince George
Also following the attendance at the Canada North Resources Expo, XHand Inc was featured by an article written and published in the Logging and Sawmilling Journal.
-
49
367
2023 peterbilt 367 Extended Cab with comercial highlift steel box. Plumbed for qurd and pup 84,000km 1900 hours. Truck is working everyday and will change. Cummins x15 565/2050 eaton 18spd 4.10 gear ratio and 46 diff. Extended warranty engine and after treatment, cooling system 5year/480k with towing packages. Arne Qurd wagon 2007 available also. Unit price $333000
-
50
26ft box
Aluminum tailgate 3500lb capacity
98’ clearance
Hydraulic Brakes