Buy and sell, Tools with in Canada, Alberta.
-
1
Durable aluminum spring-loaded frame mount attaches to any brand hard hat. Comes complete with a plastic face shield and a new spare face shield. Safely protects your eyes and face and gives you maximum visibility while operating a chainsaw, grinder, or any other application.
$25
We are downsizing in preparation for selling and moving. Please check out my other ads.
Reach out anytime for more info.
-
2
10 sockets, 10 thru 19 mm, 6 point deep 1/2” drive. Brand new and unused. Call or text me, open to offers but will ignore low ballers, check the truck price you’ll find these are a good buy. Quality sockets with lifetime guarantee.
-
3
for banding steel strapping
-
4
Toolbox - Triumph/Snap-On Special Edition
Dreaming of building the ultimate enthusiast garage? Triumph is proud to partner with high-end tool manufacturer Snap-on to offer this custom Triumph-branded specialty toolbox. Originally designed for use in Triumph dealership service departments, this premium Snap-on KRSC46H one-piece fully welded box offers flawless performance, high strength, long-term durability and makes a simply stunning addition to any gearhead’s garage. Expandable with accessory panels to provide flexibility for the future. Numbers are extremely limited, so act fast before they’re gone!
Spec/Dimensions:
Depth: 20in
Height: 46in
Width: 40in
Net Weight: 265lb
No. of Drawers: 6
Square inches: 4,392
Top Compartment Dimensions, inches: 39-13/16 W x 18-13/16 D x 4-13/16 HPriced: $ 2999.99 + gst
** NOTE: Scuff on rear lower by wheel picture shown **Precision Powersports Ltd.
Hours: Tues-Thurs 9am-5pm Sat 9am-1pm
Please call or email:
(P) 403-394-6228 (TF) 1-888-494-6228
(E) parts2@ppslethbridge.com
-
5
Super sweet plywood garbage bin. Fresh paint job. Pretty good castors. Measurements are 52 1/2” in length and 28” wide standing 40” high. Been used for renovations and still has lots of hauling days left in the tank. Looking to get $150 or so. Make a offer. Have 2 more like this one and two more smaller ones if interested.
-
6
Reese Elite R18 5th wheel hitch with Rails , came off a chevy Duramax , 18,000 lb rating $500 OBO
-
7
MASTERCRAFT DAMAGED BOLT AND NUT REMOVER KIT
-
8
Pair of Slick Locks. Installed in the last year, recently lubricated. Smooth operation.
Pair comes complete with brackets, covers and 2 keys
Brackets are for sliding side door and rear left/right opening doors. If different brackets are needed - They are cheap and easy to get.
-
9
We ARE the lowest price supplier of Pump Jack related equipment.
We also have a fully stocked selection of Frame Scaffold and Ladder Product.
Please call or email for more information. www.sturdyladder.com
-
10
Big red jack 2 tonne. Great shape. Pick up west end edmonton. 80$ obo.
-
11
Including 45 Sea-Can. Large inventory of water and sewer fittings, road signs, barracades, pvc plugs, misc water and sewer supplies.
Todays Value $150,000
Selling $75,000
-
12
New in package.
2 available.
-
13
Used in great condition
-
14
Makerspace in lloydminster Alberta. Come enjoy the benefits of lloydminster a makerspace. Welding blacksmithing power hammer coal forge gas forge hydro dipping wood shoptwenty four inch planer 18 inch bandsaw cabinet saw spindle sander five by ten foot Cnc router twenty four by thirty six inchCnc laser 3d printers pottery slab roller pottery wheels extruded sewing leather working jewellery making electronic tools pottery silk screening LegacyDiy.com prices start at 79 dollars a month
-
15
Each one good.
No holes
Older relatives moved to condo and no longer need
Small ones $10 each
Large ones $15 each
Bulk deal if buy more than one
-
16
Nothing wrong with it however one of the leads broke so it is just the multi meter. Bought for school and no longer need it
-
17
Makerspace in lloydminster Alberta. Come enjoy the benefits of lloydminster a makerspace. Welding blacksmithing power hammer coal forge gas forge hydro dipping wood shoptwenty four inch planer 18 inch bandsaw cabinet saw spindle sander five by ten foot Cnc router twenty four by thirty six inchCnc laser 3d printers pottery slab roller pottery wheels extruded sewing leather working jewellery making electronic tools pottery silk screening LegacyDiy.com prices start at 79 dollars a month
-
18
Machine comes with soft and hard jaws, OD turning and ID boring tools. 10inch chuck max 4000rpm
-
19
Faster length2”-3-1/4” (50-83mm)
.113-.131” (2.8-3.3mm)
70 MIN psi 120 max
-
20
Freeing up space
-
21
5 pair 35 for all
-
22
Excellent condition Scott airpacks for sale with 4 masks and pelican cases they need recertification
-
23
10 inch Simoniz power polisher. Used once. New $100.00 . Asking $65.00. 780-872-0866
-
24
Selling a Milwaukee 6519 Sawzall Reciprocating Saw 12 Amp with case. Works great no issues.
-
25
Model SA-350-CDN-D
This is a semi rare Canadian model
Deisel - built to run all day & all night in nasty weather.
It's a heck of a machine
Dial - no digital bs
Comes with
skid
Cables
Stingers
Stands
Being sold as a package
9500$
Located in Fairview AB
-
26
RIDGID. 811A Threading Die Head 1” to 2”
Good shape
-
27
Blue Point Universal Brake Caliper tool set. Complete and like new.
-
28
FEATURES:
- Cast iron pump with Big Bore™ cylinder and piston is engineered to provide faster recovery time for improved performance
- Powerful 3.0 HP motor produces 6.5 CFM at 90 PSI for increased productivity
- Pump is oil-lubricated for cooler running temperatures and reduced wear
- Durable cast iron cylinder reduces wear and increases pump life; removable for easy maintenance
- Folding handle with low profile design for easy storage with handle folded
- Rugged wheels for jobsite portability
- Built-in storage compartment conveniently stores air fittings and accessories
- Air hose wrap stores 50 ft. of 3/8" air hose with handle folded or upright
- Copper finned discharge tubing for increased heat dissipation and reduced water in the tank
- Tool hangers store tools when not in useSPECS:
- Maximum Horsepower : 3 HP
- Running Horsepower : 2.1 HP
- Tank : 5.2 gal.
- Performance (40 PSI) : 6.9 CFM
- Performance (90 PSI) : 6.5 CFM
- Maximum Pressure : 140 PSI
- Net Weight : 88 lbs.
- Pump Type : Oil-Lubricated
- Gas or electric : ElectricRENTAL PRICING:
$30/day
$112/week
$292/monthPICKUP AND DELIVERY AVAILABLE + WE OFFER BOOKINGS!
REQUIREMENTS: All rentals require a current/valid credit card and a driver’s licence.
.
.
CONTACT INFORMATION:Phone: (587) 495-0387
Email: rentals@digdo.ca
Address: 10032 128 Ave, Alberta, Canada - T8V 6K7
Website: OUR WEBSITE IS UNDER CONSTRUCTION. To view more of our rental items and inventory in the meantime, GO TO OUR GOOGLE BUSINESS LISTING and check out our “Products”. Please contact us for specific information and enquiries as not all available items will be listed. We are becoming known for having niche items other rental houses typically don’t provide. Examples would be a grease gun, rebar tying tool, moisture meter for wood, portable table saw and much, much more. Even with niche items, we always strive to focus on quality and reliability.Contact us today and let us know what we can Diggity Do for YOU.
“Something to dig? Something to do? Diggity Do!”
-
29
Motomaster 2T floor jack and 2T bottle jack
Used. Both work (comes with bar instead of original handle)
$45 for the pair.
I can drop off in GP Wembley or Sexsmith most days
-
30
FEATURES:
- Fastener Diameter Range: 0.120
- Magazine Capacity: 120
- Magazine Loading: Side
- Air Inlet: 3/8"
- Operating Pressure: 70-120 PSI
- Jam Clearing: Open-nose
- Depth Setting: Tool-Less
- Actuation: Contact, Sequential Optional
- L x W x H: 9-27/32" x 4-5/8" x 10-3/8"
- Tool Weight: 5.7 LBS
- Fastener Type: Coil, Wire Collation Roofing Nails
- Magazine Angle: 16-Degrees
- Fastener Length Capacity: 7/8" to 1-3/4"RENTAL PRICING:
$27/day
$100/week
$263/monthPICKUP AND DELIVERY AVAILABLE + WE OFFER BOOKINGS!
REQUIREMENTS: All rentals require a current/valid credit card and a driver’s licence.
..
CONTACT INFORMATION:
Phone: (587) 495-0387
Email: rentals@digdo.ca
Address: 10032 128 Ave, Alberta, Canada - T8V 6K7
Website: OUR WEBSITE IS UNDER CONSTRUCTION. To view more of our rental items and inventory in the meantime, GO TO OUR GOOGLE BUSINESS LISTING and check out our “Products”. Please contact us for specific information and enquiries as not all available items will be listed. We are becoming known for having niche items other rental houses typically don’t provide. Examples would be a grease gun, rebar tying tool, moisture meter for wood, portable table saw and much, much more. Even with niche items, we always strive to focus on quality and reliability.Contact us today and let us know what we can Diggity Do for YOU.
“Something to dig? Something to do? Diggity Do!”
-
31
Snap on clutch aligner set with case and manual.
-
32
FEATURES:
15.0A, 120V, 4000 RPM, 65 lbs
Bevel: 47° left/47° right, Miter: 52° Left/60° Right
Folding gravity rise stand w/wheels, slide out supports
Max. Cut Capacity - 0° Miter 0° Bevel: 3.5" x 13.5" (4x14 Dimensional Lumber)
Max. Cut Capacity - 0° Miter 45° Left Bevel: 2" x 13.5" (2x14 Dimensional Lumber)
Max. Cut Capacity - 0° Miter 45° Right Bevel: 1.5" x 13.5" (2x14 Dimensional Lumber)
Max. Cut Capacity - 45° Miter 0° Bevel: 3.5" x 9.5" (4x10 Dimensional Lumber)
Max. Cut Capacity - 45° Miter 45° Left Bevel: 2" x 9.5" (2x10 Dimensional Lumber)
Max. Cut Capacity - 45° Miter 45° Right Bevel: 1.5" x 9" (2x10 Dimensional Lumber)RENTAL PRICING:
$54/day
$116/week
$486/monthPICKUP AND DELIVERY AVAILABLE + WE OFFER BOOKINGS!
REQUIREMENTS: All rentals require a current/valid credit card and a driver’s licence.
.
.
CONTACT INFORMATION:Phone: (587) 495-0387
Email: rentals@digdo.ca
Address: 10032 128 Ave, Alberta, Canada - T8V 6K7
Website: OUR WEBSITE IS UNDER CONSTRUCTION. To view more of our rental items and inventory in the meantime, GO TO OUR GOOGLE BUSINESS LISTING and check out our “Products”. Please contact us for specific information and enquiries as not all available items will be listed. We are becoming known for having niche items other rental houses typically don’t provide. Examples would be a grease gun, rebar tying tool, moisture meter for wood, portable table saw and much, much more. Even with niche items, we always strive to focus on quality and reliability.Contact us today and let us know what we can Diggity Do for YOU.
“Something to dig? Something to do? Diggity Do!”
-
33
Brand New. RIDGID NOS 1” to 2” Right Hand High Speed Universal Pipe Dies Cat. No. 47770
Genuine Ridgid Parts never been used.
Todays Cost at the Ridgid supplier is 311.22 Plus Tax
-
34
Makita Cordless 18 volt Brushless Reciprocating Saw. Model DJR187Z. TOOL ONLY. New in the Box. Never Used. Lists at $295.00. Selling for $200.00 Firm. Call Don at 780 814 7946 anytime.
-
35
The Capital automotive equipment's 14,000 Lbs. 2-Post Car Lift is one of our best-selling two-post lifts because of its heavy-duty design and a long list of features. It has just the right height and with to get the job done right. The 14,000 LB lift capacity allows you to hoist most any modern heavy vehicle on the road today.
These two-post car lifts are available in two models-
1. HP14 -Base plate- This type of lift consists of base plate between two columns.
2. HPL14 - Clear Floor - This type of lift has a overhead beam with clear floor.
https://www.capitalautoequipment.com****Two Post Clear Floor***
Specifications for HPL14:
-Condition: New
-Lifting capacity: 6300kg (14,000 lbs.)
-Lifting height: 1860 mm (73.23")
-Lifting time: 55 seconds
-Overall height: 4200 mm (165.15")
-Overall width: 3840 mm (151.81")
-Width between columns: 3200 mm (125.98")
-Minimum pad height: 120 mm (4.72")
-Power: 3.0 kW/4.0 HP
-Voltage: 220V
-Breaker: 30A
-Weight: 1100 kg (2425 lbs.)price : $4599+tax
****Two Post Base Plate ***LiftCapacity 6300kg / 14000lbs
Overall Height 2989mm/117.67”
Overall Width 3840mm/ 151.81”
Maximum Lifting Height W/O Truck Adaptor 1900mm / 74.81”
Minimum Height145mm / 5.7”
Lifting Time 55s
Outside Column to Outside Column Width 3620mm /142.51”
Inside Column Width 3200mm / 125.98”
Drive Through 2800mm/110.23”
Column Thickness of Steel 6mm / 0.236”
Carriage Thickness of Steel 6mm /0.236”
Arms Thickness of Steel 8mm / 0.314”
Cable Diameter 8.2mm / 0.323”
Voltage220vHydraulic Fluid Requirment 3-5Gallons AW32/AW46
price : $4249+ tax
-1 Year Manufacturer Warranty for Motor and Cylinder
-1 Year Manufacturer Warranty for other partsCONTACT ONTARIO BRANCH (365) 888-3765/ (365)317-7933
CONTACT BRITISH COLUMBIA BRANCH (604)-314-9755
EMAIL US: ontario@capitalautoequipment.comhttps://www.capitalautoequipment.com
We are located in Surrey,BC and Hamilton,ON
Shipping All Over CanadaKeywords : 4 post parking lift tire changer tire balancer tire shopcar lift truck lift semi lift car hoist two post lift 4 post lift 2 post hoist4 post hoist mid rise scissor lift alignment machine 3D heavy duty tire change
-
36
- Does not include original packaging or manua
-
37
http://www.brighterfuturesolar.ca Call us to learn more or order your Custom Off Grid Kit today
BrighterFuture Solar understands the importance of Energy Independence and more importantly the security that comes with it.
No longer worry about complicated systems, wiring, batteries, or Fumes & maintenance. Our OFF-Grid kits are custom designed with your input to match your energy unique energy needs for
both on the go storage or at Home. Designed using 3.9kw, 5kw or 14kw Lithium Batteries that provide a long lasting, reliable power source that are both Maintenance free and fumeless.
Tied with the Power tower off grid inverter for a pure off grid solution or the Sol Ark Hybrid inverters and enjoy both grid & off grid at same time with a seamless plug & play experience.
Simply plug your batteries and Panels into the inverter and then the out out to the breaker ensuring you an easy and quick set up even at the most remote sites and weather conditions.
With system designed for easy expansion that allows for more batteries up to 154kw to be string together per inverter. Simply install more panels as need up the inverter rating.
We offer both custom Roof or Ground Mount options for Panel set ups as well as custom mounting advice for remote locations. We carry a variety of sizing's from small for easy portability
as well as to large long term OFF-Grid kits for all your Cabin, Cottage, house needs and more.
Custom Units & Designs Available
The Mini-$7690 1kw Solar, 3.6 kw Battery
The Starter-$14,990 3.2kw Solar , 5kw Battery, 5kw Sol-ARK or 6kw Power Tower
The Cottager-$22,490 4.6Kw Solar, 14kw Battery, 5kw Sol-Ark or 6kw Power Tower
The Chateau-$28,990 7.2kw Solar, 14kw Battery, 12kw Sol-Ark
-
38
Upgrading to all 20v tools
Comes with grinder not in pic
All items are used but great shape
Asking $300
-
39
Brand new never used EG301A MAKITA gas generator
asking $800.00 OBO
-
40
Brand new, never used., was $750 new.
-
41
Selling a complete bostitch nailer kit.
Framing
Roofing with box of nails
16ga
18ga
Compressor with flexzilla hose
These are all in next to new condition and real Bostitch, the ones at Canadian Tire are re branded garbage.
$1000 for the full kit with compressor
-
42
1/3 HP Submersible Pump / Cast Iron / Stainless Impeller / Vertical Float Switch / Model # 92341
Used for 4 months waiting for warranty pump to arrive
Retail Price .. 220 plus tax
-
43
Makita 5" Grinder - 9005B, Brand New - Never Used
-
44
Posted by Brad in tools, power tools in Alberta, Fort McMurray. January 11, 2023
-
45
Used a few times. Almost like new. Asking $250
-
46
One B & D CORDLESS weed eater; one B & D CORDLESS drill; one charger; TWO batteries. Asking $90.00. 18 volt.
-
47
Never used.excellent condition. Just a couple little scratch marks otherwise its brand new.Retials $399.00.Asking $200.00 o.b.o
-
48
Asking $500 obo only selling to get electric one, works well just don’t need the gas power currently. Pickup in lashburn
-
49
Bought a bigger pressure washer for the farm so selling this one. Pump was redone a couple years ago. If the ad is up it’s still available.
-
50
Door pull season is quickly approaching, you know how quickly these get lost, misplaced and broken. Price is per each and firm.