Buy and sell, Tools with in Canada, Alberta.
-
1
3 drawer tool storage
Drawers are 15" w x 50
Dimensions: 46.5w x 51" L
-
2
https://www.amazon.ca/Bosch-GBH18V-45CK27-PROFACTOR-Connected-Ready-Exclusive/dp/B09FFV745Q/ref=sr_1_1?crid=NDV57DUQSW83&dib=eyJ2IjoiMSJ9.yP-tPCUYgk4C25ZmkmG1xA.rGyYvzLLl1U1Q_A86tyWFCCuZfXwkRRuR0YKhHWVHuE&dib_tag=se&keywords=bosch+18v+hitman+45ck27&qid=1712768900&sprefix=bosch+18v+hitman+45ck27%2Caps%2C176&sr=8-1
-
3
Tool Box to provide storage for all your needs in one unit
Locker style with 5 cubby’s left side
All drawers and doors open and shut easily
6 deep drawer
6 shallow drawer
2 bigger style cubby’s on top
All doors lockable have keys
- 4
-
5
Corded, good condition.
-
6
Call us with any questions 250-613-7523
PC-34 Plasma Cutter Product Specifications:
Model: PC-34
- 60A Plasma Cutter (Air)
- DC INVERTER
- Uses Compressed Air needs 40-65 PSI @ 4CFM
- Dual Voltage 110 20amp/220V 30amp 50/60Hz Auto Detection
- Maximum Cut: 1 1/4" @ 4 inches per Minute
- ALL BRAND NEW Transistors/(IGBT)
- Duty Cycle 70% @ 60 Amp
- Power Factor: 0.93
- Efficiency: 85%
- Dimensions: 18.11 x 10.04 x 15.98"
- Pilot Arc
What's In The Box?
- 1 piece x Earth Clamp
- 1 piece x Panasonic P80 torch 12ft
- 2 sets cconsumables
- Regulator & water separator w/ pressure gauge
Ships in 1 day and takes 2-8 days to arrive within Canada
Shipping is a Flat rate of $50 in Canada
We are fully accredited with the BBB (Better Business bureau) https://www.bbb.org/We hold a A+ rating
Check out our website for DEMO videos
https://www.rjrequipmentinnovations.com/product/pc-34-plasma-cutter/
All our units come with a unbeatable 3 year warranty.
We can ship COD (Cash on Delivery) with Canada Post for a $15 fee
or We accept PayPal, Visa, MC AMEX and Etransfers give us a call 250.613.7523
WE WILL NOT ACCEPT CHEQUES
-
7
Like new drywall bead box with all the plates
-
8
Selling 2 brand new in the box bissett 18ga Brad nailers
$120 each nailer
587-280-3384
Alex
-
9
Mastercraft Heavy-Duty 90.8L Wheeled Tool Box with lift out tray. Measures 30” long x 19” wide x 19” tall. Has 2 lockable lid catches, telescoping handle and 2- 6” diameter wheels.
$100
We are downsizing in preparation for selling and moving. Please check out my other ads.
Reach out anytime for more info.
-
10
Used once
New condition
Comes with manual
Located in Sherwood Park, AB
-
11
Please READ ENTIRE AD!
EMAIL YOUR PHONE # OR NO REPLY, NO TEXTS due to scammers, thanks!
Will CALL you ASAP!
This $1000+ professional chainsaw was purchased last year- has been reliable, amazing on fuel, very powerful for 60+ ccm, 'cuts wood like butter', efficiently !
Note, was backup saw, has only about 10 -15 hrs. with v/g original bar/ chain !
Excellent compression , kept clean, maintained, sharpened chain, ready to rumble!
( FYI- Only ever used Husqvarna semi synthetic 2 stroke and Shell premium fuel at 40:1 mix ).
Reason for sale is just need larger pro. Husqvarna/ Stihl low hours chainsaw over 70 ccm - 95 ccm. for logging old growth/ milling etc... That's the only part trade that MAY consider, upon inspection, otherwise $800 (reduced to $750 cash firm) .
NO phone number, lowballers, scammers etc. will be ignored/ blocked .
No holds, FCFS, by appointment only!
Thanks for genuine interest!
-
12
Lightly used and ready to go. Serious setup here, this XMT can run b8g power https://www.google.ca/url?sa=t&source=web&rct=j&opi=89978449&url=https://www.millerwelds.com/equipment/welders/multiprocess/xmt-450-multiprocess-welder-m00430&ved=2ahUKEwiwh9nc5biDAxWdAjQIHbQqBPsQFnoECAkQAQ&usg=AOvVaw3OWbydPpRIeiXW7L3S-_ng Cones witu wire feeder and full spool of ER70-S2. witu cart.
-
13
2”- 3 1/2 Campbell Hausfeld notched 34 degree framing nailer
-
14
http://www.brighterfuturesolar.ca Call us to learn more or order your Custom Off Grid Kit today
BrighterFuture Solar understands the importance of Energy Independence and more importantly the security that comes with it.
No longer worry about complicated systems, wiring, batteries, or Fumes & maintenance. Our OFF-Grid kits are custom designed with your input to match your energy unique energy needs for
both on the go storage or at Home. Designed using the newest Lithium Batteries that provide not only a more powerful storage capacity, longer lasting but made for our Canadian cold.
Tied with the Renogy off grid inverter or the Sol Ark Hybrid Inverters designed for a seamless plug & play experience, large solar capacity and large expandable battery capacity.
Simply plug your batteries and Panels into the inverter and then the out out to the breaker ensuring you an easy and quick set up even at the most remote sites and weather conditions.
With our systems designed for easy expandability that allows for more batteries up to 154kw to be strung together per inverter or simply add more panels as needed up the inverter rating.
We offer both custom Roof or Ground Mount options for Panel set ups as well as custom mounting designs/advice for remote locations. We carry a variety of sizing's from small for easy portability
as well as to large long term OFF-Grid kits for all your Cabin, Cottage, house needs and more.
Custom Sizes & Mounting options Available With Both 12V & 48V Set ups
-
15
Brand New - open box
Global Trade & Distribution Inc.
45 Tigi Ct
Concord, ON, L4K 5E4
Tel: 647-894-2611
Sales@gtdsupply.com
- Maximum precision
- Ergonomic Push incision
- Multifunctional
- Made in Italy
Montolit 36" Masterpiuma P3 Tile Cutter (93P3).
Multifunction, Power, and Precision are the main features of this innovative Tile Cutter. 100% Made in Italy.
Masterpiuma is the lightest among professional tile cutters. Engineered for easy cutting all types of available ceramics, porcelain, and glass tiles, including glass mosaic. Accurate and extremely powerful ergonomic push scrib handle. Recognized as the most effective lever on the tile cutter market. The self-adjustable patented scoring system facilitates and consistently speeds up the cutting and splitting process on every different thickness and material, either porcelain, ceramics, or glass. Set-up, transport, and storage are quick and easy, thanks to the patented foldable design. This professional snap tile cutter doesn’t need to be dismantled. Masterpiuma Tile Cutter has a structure in die-cast aluminum and nickel-plated steel for maximum strength and weather-resistance.
The cut-off device made of special non-scratch plastic. Titanium wheel as standard (special for porcelain tile). Protractor square and extension close away without protruding beyond the profile of the cutter.
The item is in perfect condition, open box
-
16
For sale
Magnum industrial table saw 3 horse power, modele 51-350, 2500$
Magnum industrial dust collector 3 horse power, modele 11-400, 300$
Both run 220 volt
Include all flex pipe and fitting needed
I used them to rip 80 sheet of plywood, still like new.
Located Canmore area
Thx
Frank
-
17
THE SEEKER 300 VIDEO INSPECTION SYSTEM
color 3,5 " LCD Screen for crystal clear image,
new cond. $ 60 obo
-
18
Call us with any questions 250-613-7523
PTA-500 Product Specifications:
- Power supply voltage AC 110/220V Auto detection
- Power supply capacity 7.3 kVA
- Rated input current (TIG) 16.7 A
- Rated input current (MMA) 23 A
- Rated input current (CUT) 27 A
- Output current range (TIG) 10 - 200 A DC
- Output current range (MMA) 10 - 200 A
- Output current range (CUT) 10 - 50 A
- No-load voltage (TIG) 56 V
- No-load voltage (MMA) 56 V
- No-load voltage (CUT) 220 V
- Dia. of welding rod(MMA) Max 5/32
- Arc initiation way (TIG) HF
- Arc initiation way (MMA) Touch
- Arc initiation way (CUT) HF
- Protection grade provided by enclosure IP 21
- No-load loss 50 W
- Power factor 0.93
- Insulation class F
- Duty cycle 70%
- Efficiency 85%
- Air pressure (CUT) 40-60 psi @ 4 CFM
- Gas flow (TIG) 2-5 L/min
- Gas flow (CUT) 100 L/min
- Cutting thickness (CUT) 3/4 inch @ 2.5 inches per Minute
- Weight 12 kg
- Dimension (mm) 420*210*300
What's In The Box?
- 1 piece x Ground Clamp
- 1 piece x Stick Holder
- 1 piece x Panasonic P80 torch 12ft
- 1 piece x Tig torch 12ft
- 3 sets consumables
- Regulator & water separator w/ pressor gauge
Shipping is a flat rate of $50 anywhere in Canada
All our units come with a unbeatable 3 year warranty.
We can ship COD (Cash on Delivery) with Canada Post for a $15 fee
or We accept PayPal, Visa MC AMEX and Etransfers give us a call 250.613.7523
We are fully accredited with the BBB (Better Business bureau) https://www.bbb.org/
We hold a A+ rating
WE WILL NOT ACCEPT CHEQUES
-
19
Selling my Makita Brad nailer and Makita jig saw power tools.
These tools are used but are in good condition and also work very well.
Selling
Brad nailer $75
Jig saw 75$
Both tools come with a carrying case.
-
20
FINANCEMENT DISPONIBLE - WWW.HOCANADA.COM - 1(844)440-4014
Ces unités nous ont été envoyées par nos partenaires de Bartell Global. Ces unités sont en boîte ouverte et 529,99 $ de réduction sur le PDSF. À toutes fins utiles, ces unités doivent être considérées comme neuves ! Achetez les 6 unités en même temps et recevez un rabais supplémentaire de 500,00 $ !Laissez le 2x4 à la maison, là où il appartient ! Vous ne regretterez pas d'échanger votre 2x4 contre une vraie affaire. Cet outil est abordable et facile à transporter, à assembler et à utiliser. Nous avons conçu cette unité pour permettre à un seul opérateur de niveler rapidement et facilement une grande surface. Garanti d'amener votre placement de béton au niveau supérieur ! Plusieurs longueurs de lame disponibles de 4' à 16'
CARACTÉRISTIQUES
Poignée réglable pour le confort et la sécurité de l'opérateur Le système de montage absorbant les chocs réduit les vibrations de la poignée
- Réactif Accélérateur monté sur la poignée et interrupteur marche/arrêt
- Les vibrations à haute fréquence dispersent et nivellent le béton
- L'espace entre la lame et le pied empêche l'accumulation de matériau susceptible d'amortir les vibrations.
- Léger et facile à transporter
- La conception supérieure de la lame permet de couper et de lisser en une seule opération
- Distance entre les trous – 9 pouces et convient à la plupart des fabricants
- Matériau de la lame : aluminium T6061 résistant à la rouille de qualité industrielle.
- Disponible uniquement chez HOC et Bartell Global.
Prix des lames de chape (livraison gratuite dans tout le pays)
- Lame à table de rechange de 4 pi (1,2 m)399,99 $
- Lame à table de rechange de 6 pi (1,8 m) 449,99 $
- Lame à table de rechange de 8 pi (2,4 m) 579,99 $
- Lame à table de rechange de 10 pieds (3,0 m) 799,99 $
- Lame à table de rechange de 12 pieds (3,7 m) 954,99 $
- Lame de chape de rechange de 14 pi (4,3 m)1 119,99 $
- Lame à table de rechange de 16 pi (4,9 m) 1 319,99 $
Prix de la lame de chape (prix de ramassage local réduit)
- Lame de chape de rechange de 4 pi (1,2 m)294,99 $
- Lame à table de rechange de 6 pi (1,8 m) 344,99 $
- Lame à table de rechange de 8 pi (2,4 m) 464,99 $
- Lame à table de rechange de 10 pieds (3,0 m) 574,99 $
- Lame à table de rechange de 12 pieds (3,7 m) 694,99 $
- Lame de chape de rechange de 14 pi (4,3 m)829,99 $
- Lame à table de rechange de 16 pi (4,9 m) 999,99 $
SPÉCIFICATIONS
- Poignée (entièrement réglable) 28 lb (12,7 kg)
- Lames 4' (1,2 m) – 16' (4,9 m)
- Poids de la lame 6,41 lb (2,9 kg) – 25,6 lb (11,6 kg)
- Moteur 1,3 ch, 35 cm3, démarrage à rappel, refroidissement par air, cylindre à came en tête unique
- Capacité de carburant 0,17 gal (0,65 L)
- Durée de fonctionnement estimée 1,1 heures à 7 000 tr/min Poids (à sec) 27,9 lb + lame (12,7 kg + lame)
- Poids (en fonctionnement) 29,6 lb + lame (13,5 kg + lame)
- Puissance sonore 50
- Dba Vibrations <9 m/s2
Le prix comprend la livraison gratuite + 90 jours de garantie tout compris !
House of Contractors Inc.
1(844)440-4014
www.hocanada.com
-
21
Brand new from home hardware 2 months ago used 1 time for 20 min come with full pack of 120 grit sanding belts
-
22
Miller 212 Autoset mig welder
Excellent condition
-
23
FINANCING AVAILABLE - WWW.HOCANADA.COM - 1(844)440-4014
The House of Contractors Inc. SF1 Power Screed is proudly offered as HOC's premium power screed. Its unique wide handle grips + 360 degree adjustable handles make managing all blade sizes all the way up to 16.5 feet a breeze. Make Flat Work Less Work. It features a unique blade profile that enables a single operator to quickly and accurately strike off concrete floors using a single blade for both form-to-form and wet screeding. The screed's vibratory action embeds aggregate and reduces air voids, producing a strong dense slab, while eliminating the strenuous, time consuming labor of manual screeding.
Features
- Its unique power bar and power transfer system produces a high-frequency vibration that eliminates the honeycomb effect and speeds finishing time
- Strikes off, consolidates concrete with slumps of 2 inches (5 cm) or more.
- Embeds aggregate, reduces air voids for dense slab
- Blade is quickly removed with just two bolts; handle comes apart for storage
- Powered by Honda GX35 4 stroke
- light weight easy to use ( 31.9 lbs )
Screed Blade Pricing (Free Shipping Nation Wide)
- 6.5 Foot $404.99
- 8.5 Foot $514.99
- 10.0 Foot $1129.98
- 11.5 Foot $989.99
- 13.5 Foot $699.99
- 16.5 Foot $1124.99
Screed Blade Pricing (Discounted Local Pick Up Price)
- 6.5 Foot $299.99
- 8.5 Foot $399.99
- 10.0 Foot $499.99
- 11.5 Foot $599.99
- 13.5 Foot $699.99
- 16.5 Foot $799.99
Specs
- Engine: Honda GX35 4 Stroke
- Horsepower: Honda GX35 1.6 hp
- Frequency: 3600 rpm
- Vibrations Per Minute: 8000 vpm
- Blade Material: Strong Rust Resistent T6061 aluminum
- Body Material: Stainless Steel
- Fuel Tank Capacity: 0.65L
- Weight: 14.5 kg (31.9 lb)
Free Shipping Nation Wide + Industry Leading 3 Year Warranty! Item Only Available At HOC.
House of Contractors Inc.
1(844)440-4014 (Toll Free)www.hocanada.com
-
24
48 inch square bull float with 8 foot extension
-
25
Used only once. Excellent condition. Like brand new
-
26
I’m posting for my step mom. After my fathers passing she needs to sell these items. After I view messages I will pass her # onto you
Only serious injuries Saw Bench Table
-
27
Selling for family member
9inch table saw.
-
28
71/4” skill saw. Used very little comes with 4 brand new blades $70 obo
-
29
Maybe 15 nails through it. Battery was never used.
-
30
Myford super 7 lathe 3.5" X 19" with 4" 3 jaws chuck.
Comes with original tools and manual. (includes bench it attached to)
runs good with no issues.$2000.00 obo
-
31
Battery holder for dewalt or millwalkee batteries . Wall mount 3d printed new . Great for organizing your batteries on the wall and have more space in the drawers for other parts Asking 10 dollars a piece minimum 5 pieces and you can pick up or we deliver to these towns.
Lloyd minster
Vermillion
Elk point
St paul
Bonnyville
Coldlake
-
32
TheWhacker plate tamper. Bought for project at home, no longer need it. Will swap for a outboard kicker motor ( 8-20 hp) or $1000
-
33
Rolling Shelf. Swivel castors on all 4 corners.
48" w
20" d
64" hHeavy duty shelf, good for garage or commercial use.
-
34
Extra charge for shipping if needed
Size small
New never used
Worth $200 reg. price
-
35
4-1/2 inch angle grinder used once been sitting in the garage since comes with guard and handle and two brand new packs of discs 70$ for all will sell separately as well
-
36
Mobile base makes any tools mobile such as saws, tool chests, etc. Expandable.
-
37
Millermatic 180
Helmet and gauges,
-
38
$35
TOOLS ONLY
Brand new
Crarftsman 1/4 impact
Driver kit
No batteries and charger
Meet up or pick
West end closed to
Wem mall
-
39
Never used comes w box asking 100 obo
-
40
All set of 4 $20 heavy steel used $5 each
North Edmonton location
Selling extra tools
No refund or return no shipping cash payment upon purchase
-
41
Cordless drills availabile.
Also cordless light. 20.00
With batteries
Drills 30 each
light 20
-
42
This is an overstock item from last year. Item has never been used or set up. Item has been sitting outside for the past year. Item purchased for $5040.
Features
Reinforced, fully welded industrial use structure with a powder-coated steel frame finish can hold its own on any job site and is resistant to rust and corrosion
Automotive engine type rubber cushions added on the base to reduce vibration and noise while operating as well as reducing wear and tear over time
Diesel oil fired burner with stainless steel housing that can heat water to approximately 85℃ in just under three minutes for more cleaning power
Flame detector integrated to provide signals with accurate timing for the fuel pump and 12V DC ignitor ensuring reliable startup on every use
All-in-one operation control panel that includes an adjustable thermostat, on/off switch and easy-to-use water pressure settings
Compact design and attached lifting bar for convenient mobility while working, between job sites and taking in and out of storage
100’ high pressure ⅜” hose with a hose reel mounted allows you to work around big vehicles or farm equipment and also cover large floor spaces, driveways or buildings
Specifications
Pressure range: 3500-4000 PSI
Flow rate: 4.0 GPM
350,700 BTU per hour
Burner coils: 20mm, 12 GA
Temperature rises to 85 °C in 2.5 minutes (average)
High-pressure hose: ⅜” x 100’
Five quick coupler nozzles: 0°/15°/25°/40° and one chemical
Downstream chemical injection system
Water supply: Tap water
5-gallon poly fuel tank
13” pneumatic tires
Pump:Triplex plunger pump
Oil bath crankcase
Thermo pump protector
Gearbox drive
Stainless valves
Brass manifold
Engine:14 HP Kohler CH440 Command Pro Series Engine
Displacement: 429 cc
Starter type: Recoil & electric start (battery included)
Cast iron cylinder liners
Oil Sentry automatic shutdown
Accessories:100’ high pressure hose and hose reel
3’ spray wand and gun assembly
Five nozzles
-
43
220v input , 24v output battery charger for electric pallet jacks and fork lifts. 220v input. $525.00 OBO Don't waste you time sending text or kijiji message as they can't be answered, give us a call at 780-970-238six if you are interested in acquiring this item..
-
44
Flooring Cutter
-
45
Selling as complete set - Ideal for roofers
Dorsal D-ring
5 points of adjustment (2x legs, 2x torso, 1x chest)
Capacity: 160 kg (352 lb.)
X in PVC that prevents tangling
Easy doning leg straps
CSA Z259.10 Class A and ANSI Z359.1 approved
Manfactured 04/2022.
-
46
$5 each
Second hand used selling extra tools
-
47
Miller 25' tig torch
Never been used. Bought it forever ago but isn't compatible with my old machine so here it sits.
$200.00 obo
-
48
Air hardwood floor nailer. Comes with box of nails and hammer.
-
49
Drop Zone brand tool belt suspenders. Made from 1” and 2” webbing. Designed to hold up your heavy tool best while providing maximum support to your shoulders and back. Has end loops that will attach to any brand tool belt.
$10
We are downsizing in preparation for selling and moving. Please check out my other ads.
Reach out anytime for more info.
-
50
Used for one house and probably less than a thousand square feet of hardwood. Works great and like new. Everything is in the Box including instructions. New price is over 250