Cars & vehicles with in Canada, Manitoba, Brandon.
-
1
Alliance floatation 328
-48-31.00-R20
-
2
44 ft John Deere 730 air drill with 787 tank. 6 inch spacing, single chute. Heavy harrows and new style towers used 2 seasons. Tank comes with coarse and fine rollers and a new loading auger. Asking $18,000. Call or text 204-825-7613.
-
3
They all hold air, and have no sidewall cracks.
Contact # 1-204-750-0397
Located 20 mins west of Carman
-
4
Have for sale a beautiful 2009 IH Eagle 9200i tandem grain truck. Truck features:
- Four year old grain box built and installed by loadline with rear hoist controls, has never seen fertilizer
- Full engine rebuild with all cat parts including new cam 2018, low miles on rebuild
- Emissions systems permanently fixed, will pass an inspection
- EGR just redone
- New exhaust downpipe back
- Eaton ten speed manual transmission (no autoshift garbage), clutch was just adjusted
- Matching drive tires
- pintle hitch ready (plenty of power to pull a pup)
- lots of other small work done such as new speed sensor, new battery cables
- All work done by professional shops with receipts, no farmer rigging
Truck is basically brand new and it shows. Was only used for field to bin. Downsizing equipment line up and this truck no longer fits our operation. Asking $73,000 obo. Contact Jean at 204-750-3023 for any inquiries or for viewing. Truck is located in St.Claude. I do not need help selling.
-
5
SuperSuite Cab, 2250 hours, Heat and Air, Radio, Air Ride Seat, 4X4, 23G/12R Shuttle Shift Transmission, 55 HP Shibaura Diesel, 3PT, 540 PTO, 1 set of Rear Remotes, Drawbar, 2500lb Lift Capacity, Operating Weight - 6010lbs, 12-16.5 Front Tires, 18.4-24 Rear Tires, 84" Snow Blower (will not separate)
-
6
International 403 combine, close to field ready needs canvas on the pickup header and some attention to the variable drive foot control otherwise runs great.. good for a collector or hobby farm 2000 OBO... please call or text 2048945712
-
7
42”deck, 37hrs
-
8
New 2020 Ashland 3250ss Skid Steer scraper. 81.5″ cut width. This makes it perfect fit for the larger CTL on the market today. The 3250SS can cut, carry, and dump up to 3.25 cu. yds. while the integrated leveling blade handles final grading in a single pass. Requires 80+ HP. $20,000
-
9
2010 RZR S
Approx 1200 miles on RZR chassis
Approx 4500 miles on Weber 750 turbo engine
This is the turbo 4-stroke used in Polaris FST sleds
Yes it's fast
No time, Haven't used it in 2 years
Seeing if there is interestUpgraded Garrett GT25R turbo
Precision Sports stage 4 flash.
Makes 21LBS of boost / 200 ish HP
Auto meter pro comp liquid filled mechanical gauges: Boost, oil temp, water temp.
Polaris FST MFD Display
Dirty Dawg Performance adjustable clutch kit
PACE offroad black anodized air box
2 1/2" aluminum charge piping and aftercooler
2 1/2" Stainless exhaust
Fanned Remote oil cooler for engine oil
Fabricated aluminum oil tank
FPS racing upgraded radiator
Fan override switch for radiator and oil cooler fans
Polaris 3500LB winch
Racer tech Baja front bumper
Racer tech 2" lift
UTV INC 3" padded harnesses
Fully gusseted and sleeved frame from UTV INC and Racer Tech
Full Polaris aluminum skid plate
UTV INC bolt on intrusion bar
UTV INC bed plate
Polaris roof
Polaris half windshield
Pro Armor doors
Extra rim and tire
Rebuilt HD alternator
Engine is dry sump, all oil lines are push-lok with black AN fittings
Will come with all extra parts and stock parts I have , including the stock 800 motor which has a hole in the block
Include jumper harness I made to read Polaris engine codes with a regular OBD2 reader
Stock RZR harness is all still in machine, under drivers seat , FST harness was grafted into RZR harness where it needed to be.
Will pass on all specs, information and build pics I have from building this machine
A water proof clutch cover should be fabricated
A aluminum intake box should be fabricated, the throttle bodies pop off at 21 lbs of boost sometimes
Have a ton of time and $ invested in this, price reflects it sitting unused for 2 years and it needing those couple things addressed
-
10
Approx 1000 original miles!!!! Only 52.6 hrs!! Tons of upgrades Serious inquires only! Tons on money invested just no time to ride anymore! Local dealer selling same machine for $5500 with 4500 miles Will sell or trade for ski boat or seadoo(s), quad or sxs!!
Power commander 5 that’s fully programmable but currently has the reliability promgram. Advanced oil pump. Engine fully rebuilt-crank bearing failed at approx 700 miles. So new Polaris crank new cases engine spacer kit. Wiseco long skirt reliability pistons. All new gaskets and seals. Skid plate. Low black windshield and mid height clear. Mountain grab bar. After market trailerable Cover. Tunnel bag. Only ran Polaris ves gold oil. Valves cleaned regularly. Greased and maintained properly. I’m sure I’m forgetting some stuff too. She’s a fast and fun sled. Only selling or trading cuz I have a new job and don’t get much time in winter to ride. Only ran premium fuel too. But has the option to run regular with a switch It’s a 136” x 1.25” track too. Also has perc reverse. Starts first or second pull in winter. Summer takes 3. Has the clean fire fuel injection too. Probly forgetting some stuff as well
-
11
2012 Ski Doo Renegade X 800R E-TEC · Driven NaN miles
Priced to move!
2012 Ski Doo Renegade X 800R E-TEC
800 CC Engine
137 inch track
1.75 inch lugs
Excellent condition
3382 miles or 5411 kilometres
No rebuilds
Electric start
Reverse
Hand and thumb warmers
Can answer any other questions you have about the sled or options it has.
Great sled for anyone!
Located in Morden, Manitoba
-
12
2014 summit x , brand new motor short block from CVtech with 300 km on it , warranty till end of this year , Has full slp exhaust Y pipe and expansion pipe I have the slp can to but sled is running a GGB right now , has bumper with light bar txt me if your interested 1204-871-3012 $8500 obo
-
13
2007
6300 miles
Call or text 204-751-0346
-
14
Snow checked original owner with electric start. Comes with cover and spare belt . 2600 miles located in Dauphin. Motor has never been touched .
-
15
2006 arctic cat crossfire 700. Solid machine lots of power. 3600 miles $3800 firm
-
16
Mint condition, 14560 kms, rebuilt motor 12500 kms, upgraded skis, replaced primary clutch, new rear suspension springs, 136” x 1 3/4” track, exhaust can, $3650 obo, text for quickest response, serious inquiries only, 204-867-7183
-
17
This sled is GREAT condition it has new high quality sliders, carbides , and windshield no rips the sled doesn’t need anything. Can include an extra track for the right price. This sled is a fast sled and fun to drive!! It is ready to ride!
-
18
Large bombardier leather snowmobile jacket very warm and comfortable. Smoke free, cleaned and Sanitized.
-
19
Used GMC grill, in good condition. Crack on emblem, and a small area with the chrome peeling off. Contact for more inforation.
-
20
Used Chevrolet grill, in good condition with one minor scratch on bowtie. Contact for more info.
-
21
To be sold by Unreserved Public Auction
Visit pennerauctions.com for details
Auction Close Date: April 20th
Bid online at pennerauctions.com
View all lots here
-
22
2006 F-7 parts - Skis, hood and motor. Motor comes complete. Other assorted parts. Making space make me a reasonable offer for it all.
-
23
A full set of KYB Excel-G struts with tein lowering springs
They were on a 2004 Acura tsx
300$
-
24
500$ obo
Methanol-Water Injection Kit
Alcohol Injection Systems
Purpose: Sprays Air Coming Into Engine Making a Cooler Air/Fuel Mixture and Increasing Octane
Increases HP while Reducing Engine Knock
Includes:
Pump/Motor
Tank
Wiring and Tubing
Support Pieces
-
25
42 15.5 20 mud tires. Looking to downsize a bit to either 38 or 40. Open to offers or trade. 204-825-7864
-
26
Looking for a passenger side heat stove extension
. This part is connected to the flexible duct tube/hose, coming from the air cleaner snorkel. This formed tin part slips into the passenger side exhaust manifold heat stove, and held in place by a bolt. Any help appreciated! Also looking for a PCV filter to tappet cover hose and nipple.
-
27
2006 F-7 parts - Skis, hood and motor. Motor comes complete. Other assorted parts. Making space make me a reasonable offer for it all.
-
28
Parting out a 2014 Honda Civic Sedan, Has a complete engine and Automatic transmission. Also has many other great parts. Let me know what you need. Phone or text 204 325-2444
-
29
1973 dodge dart swinger for sale, low kms, in decent shape, has rust that needs attention 225 (3.7) slant 6 engine and transmission, currently dry sezied from sitting for awhile, should be free turning in a few weeks, was running and driving when parked, have plans to use kerosene in the cylinders to loosen it up, to good glass all the way around. May consider parting out or trades. Contact for more info or pics Price is or best offer.
-
30
50 or open to offers
-
31
Looking for a decent 72 Ltd 4 door want something road worthy
-
32
Are you thinking of Summer?
If you’re looking for a great Summer cruiser, come take a look at my 1984 Ford Mustang.
- 347 stroker motor built by Legree Racing in Rochester Michigan
- Built as a road race engine
- Full 3 inch exhaust system
- T5 5 speed standard transmission
373 gears with a 8.8 rear-end housing
- Air suspension
- New upper and lower control arms
- Torque box reinforcement
- Comes with 10.5 inch Dot approved slicks
- Factory appearance interior
Since I’ve owned it, it’s never seen the snow
Reliability is built into this engine.
-
33
2001 Pontiac Trans Am SLP Firehawk 10th Anniversary Edition
Limited production mint condition collectors car
19,000 miles (USA Car)
1 of only 139 10th anniversary trim models made.
335hp 5.7L LS1 V8
4 speed automatic transmission RWD
T top roof
Authentic leather interior
Bilstein suspension
Auburn high torque performance differential
Cruise control
Monsoon 10 speaker premium sound system
Dual exhaust
19 MPG city/28 MPG highway
All of these features are OEM or dealer options, the car is completely stock.
There is a binder included with all documentation on the vehicle.
The vehicle was appraised in 2016 at $50,000.
If you have any questions or want to make an offer feel free to send a message and I will get back to you.
-
34
29 coupe body on a frame with sheet metal........call or text 204-870-2267
-
35
Ford made a convertible sedan in 1931 - the A400. In 1932, this body style with full doors, roll up windows and a folding top was the B400. This project car is a take on those body styles - starting with a 33 2dr sedan as a base, a cabriolet cowl was added, the top chopped 1 1/2”, the quarter windows shortened 6” and the body is completely reinforced with steel tubing. A new 16 ga flat floor is installed along with 16ga wheel tubs. The frame is a custom built with a 2” stretch at the cowl and a kickup at the rear. The rear suspension is a Heidts polished stainless and aluminum independent to match the Heidts polished stainless superide front end. A steel 3 piece hood is stretched 2” to match the frame. Rear original steel fenders have been bobbed to go along with the repro steel fronts. Wheels are Americans with bfg tires - 15” fronts and 17” rears. The roof is a one piece lift off top - aluminum tube structure that is skinned in sheet aluminum. This is a high end build for someone that wants a one of a kind 33 never produced by Henry -Call or text - no trades- 204-870-2267
-
36
Has 4x4 locking hubs. Has 454 engine in it with 400 trans behind it. Trucks in pretty good shape very little rust. It’s safetied. Box has no rust call or text 204-208-0700
-
37
Car has cruise tilt power windows power seat, power top.
This car is in excellent condition.
Safetied
Call me if you are interested in purchasing the car.
Dont need any help selling other than kijiji.
Will consider trade for 80s Dodge truck of equal value.1-204-595-6217
-
38
Just putting some feelers out. I have a 1953 Dodge Regent, straight 6, 3 speed/3 on the tree, all original yet. Runs and drives but not saftied at the moment. Make me an offer or let me know if you are interested at all.
-
39
TRADE only ! Lund ssv14 2008 anniversary addition full floor deep v IPS hull in great condition comes with a Suzuki 9.9hp 4 stroke electric start and manual extremely low hours garage kept in heated garage
Lund anniversary matte black bunk trailer 72” beam very stable in all conditions all equipment maintained fully every spring . Wanting to get a bigger boat for growing family TRADE FOR 16 to 18 aluminum fishing boat prefer 4stroke Lund alumacraft or crestliner !!!Will ADD IN ADDITIONAL MONEY FOR UPGRADED BOAT !!! TRADE ONLY perfect boat for someone wanting to downsize
-
40
Financing up to 20 year terms OAC .Finance from $225. bi weekly 0AC Zero down .
Length21' 6''
Beam8' 6''
Bottom Width7' 2''
Max. Recommended HP250 HP
Fuel Capacity36 gal.
Max. Person Capacity12 persons
Max. Person Weight1800 lbs.
Max. Person & Gear Weight1800 lbs.
Interior Depth30.75''
Deadrise20 degrees
Draft (Trimmed Up)16''
Draft (Trimmed Down)32.5''
Average Dry Weight3350 lbs.
Average Package Weight4350 lbs.
Bridge Clearance3' 10''
Package Height6' 6''
Package Width8' 6''
Towing Length25' 3''
Storage Length23' 6''
-
41
Easy adjust from top . Just roll it in and roll it out at the end of year . Nonskid aluminum top . Maintenance free.
24' $3900 assembled
32 ' $4650. assembled
32 with a 4'L on end $5750.
48' $ 6700.
48' with 4' L on end $7800
48 ' $ 6600 assembled
-
42
1990 seadoo 580 runs good just had starter rebuilt for it and it needs to be installed, 2500 or best offer
NO TRADES
- 43
-
44
Estate sale of private collection old/antique outboard motors. All makes
-
45
1972 18ft Y flyer sailboat sail # is Y-1797
Wooden Monohull, Hand Built in Manitoba . Completely refinished 2018. New Stainless-steel rigging. Aluminum retracting center board
Auto bailers
Excellent condition and ready to sail
Wintered indoorsAlso available. Custom built, stainless steel, 6-wheel, shore-landing and transport dolly.
-
46
2000 Polaris slh 700
Need repair
Needs new piston
Asking $1900
*No Trailer*
CALL 204-362-6749
-
47
Backwater Boats are fun and affordable boats suitable for time on the water with family and friends, sightseeing, fishing, hunting and transport to/from shore. At only 59 lbs it is one of the lightest small boats you can buy. Light enough for one person to carry. There is nothing to inflate so you can grab and go. You will be on the water in no time.
Your boat fits easily into the back of a truck/SUV or onto a roof rack, even on smaller vehicles.
Backwater Boats are available in three colors: clear, white and sportsman green. The front seat and rear bench seat gives you multiple seating configurations. Optional oars and oarlocks are available. The boat accommodates bolt on accessories that you can attach directly to the hull.
If you don’t want to row the optional aluminium and plastic transom plates allows you to attach a 2.5 hp gas motor or an electric trolling motor with battery. (For green and white boats)
Our boats are thermoformed from a single sheet of high durability plastic and are more durable than wood or fiberglass. This means there are no seams to leak, they never need painting, and they’re easy to clean.
Among boaters it is known as a dinghy, tender or skiff. Among sportsmen, it is known as a fishing boat, sled, pram or as most say “an alternative to inflatable boats”. We just call it a great boat that our customers love.
KEY FEATURES
• Lightweight - only 59 lbs
• Safety Floatation Foam - New higher density foam in all seats
• Optional Oars - 2 piece aluminum collapsible oars
• Durable and easy to clean
• Easy to transport - Fit in the back of a truck or SUV, or on a roof rack
• Optional Aluminium & plastic transom plates - Easy to attach a trolling motor
• 3 Seats - Front, Middle and Rear
• Optional Oar Locks - Unique proprietary plated stainless steel oar lock system for better control rowing
• Stainless Steel Hardware - Prevents rustingBOAT SPECIFICATIONS
• Weight – 59 lbs (26.8 kg) White and Green, Clear 65 lbs (29.5 kg)
• Dimensions – 90” Length, 47” Width, 17” depth (229cm x 120cm x 43cm)
• Carrying Capacity – 352 lbs (160kg, Including passengers, cargo and equipment), up to 2 people
• Material – UV resistant ultra strength plastic
• White and Green boats are made from polyethylene plastic, UV resistant coating on both sides
• Clear boats are made using a proprietary high strength plastic, UV resistant coating on both sides
• Front Seat has two cup holders for cans and larger containers (3.3” and 2.9” diameter, 1.375” depth; cell phone holder for newest phones (6.6” x 3.5”), all with drainage channels to disperse water
• Middle Seat has two cup holders (2.9” diameter for cans) and two compartments (3“ x 6”) for items, slots under seat for feet or small items
• Rear Seat has two cup holders (2.9” diameter for cans)
• All seats are removable for storage and stacking
• All seats contain high density flotation foam
• Aluminium and polyethylene Transom Plates, supports gas or electric motor
• Optional transom for 2.5 hp or electric equivalent (white and green models only)
• Optional oars are 2 piece aluminium that are collapsible for storage; 65” long, 34” long when collapsed, paddles and grips are plastic
• Optional oar locks are a unique proprietary design, stainless steel backing plates
• Stainless steel pad eye and backing plate on bow for towing of tiedown
• 1 year warranty on all parts and hardware
• Made in CanadaPrice listed $1399 is for the white or green with oars/oar locks and delivery to the greater Brandon area. Taxes additional. Contact us for additional options. Visit plasticboats.com to see more images and videos.
-
48
2019 Princecraft Hudson 170 DLX WS 2019 Princecraft Hudson 170 DLX WS
17'-10'' of pure fishing features! With up to 5 people on board, enjoy your favorite sport and everything this boat has to offer: ergonomic design, bow and aft raised casting platforms, lockable 10-rod storage, livewell, twin consoles, and a No-FeedBack dual cable steering system. Why spend more? This boat has it all to make it the best fishing adventure. This boat can handle an outboard engine ranging from 90 to 150 HP.
Features may include:
Hull and Deck- 5052-H36 marine grade aluminum alloy
- NMMA & Transport Canada certified
- High gloss exterior High Solids urethane paint and decal package
- Reverse chine hull design
- Aluminum clad transom
Fishing- 7 foot rod storage without support
- 12V or 24V bow trolling motor plug & receptacle with wiring harness
- Trolling motor plug with 60 AMP protection
- Bow mounting trolling motor pad
Livewell(s)- STERN LIVEWELL (44", 77 L / 20 U.S. GAL.)
- Electric-filled aerated [ SportFlo ]
- Overflow
- Anti-spill cover
- Protection filter on the filling pump
Seats- 6 floor seat bases
- 2 folding seats with no-pinch hinges
Console- Twin consoles with steering system
- Drawer under driver console
- Black anodized walk-thru curved tempered glass windshield with door
- Deluxe dash panel with switches and indicator lights
Instrumentation- Tachometer, speedometer, voltmeter, trim and fuel gauges
Other Standard- All the flat surfaces are covered with marine grade vinyl
- PrinceTrak System: extrusion allowing onboard tool attachment
- Electric bilge pump
- 2 bow handles
- Navigation lights
-
49
SOLD PENDING PICKUP
2016 Maverick XMR For Sale.
Machine was road and trail driven. Always taken care of. Have all factory stuff to include that has been changed out. Also some basic maintenance stuff to include as well.Add ons
- 3inch lift
- RJWC exhaust Pipes (still have factory)
- Big Gun cat delete (exhaust pipes brand new INCLUDED)
- Dual battery setup (battery not included)
- SSV 12 speaker stereo with 10 in sub
- Blue tooth controller
- 42 in light bar
- 9 in light bar
- RJWC Custom painted shifter handle
- Under glow (8 RBG lights) Blue tooth
- RGB whip lights blue tooth
- Green HALO lights on head lights
- 30x10x14 Out back Max tires 75 % tread left only ran barely one season
- Custom tinted tail lights
- Super ATV front bumper
- Super ATV front winch plate
- Super ATV 5000lb winch (synthetic rope)
- Super ATV rear hitch
- Aftermarket front grill
- Can am rear view mirror
- Can am half doors
- Can am full front windshield
- Can am half windshield
- Can am rear screen
-
50
Selling my 2019 Polaris SKS 155 800. Has just over 600 miles on it. Snowcheck Select model, Blacked out all around. Khaos seat, red windshield and Skid plate, under seat bag, also have factory black mid windshield. Can include rear tunnel bag and PIDD display for the right buyer. Open to offers. Warranty until November 2022. Full specs in pictures.