Buy and sell, Tools, Power Tools with in Canada, British Columbia.
-
1
New in box model 9005b 793 2969
-
2
Starts first pull, some minor scratches on the plastic. Its a Honda, it'll outlive both of us.
Can deliver if needed Located in Dawson Creek.
-
3
Mastercraft 2” - 3-1/2” air framing nailer. Used for one project, no longer need.
-
4
Powerful,Consumer Rated #1...Sun Joe 14.5-Amp 2030 PSI Max 1.76 GPM Max Electric High-Pressure Washer w/ 5 Quick-Connect Tips, Detergent Tanks, Heavy Duty 20 ft Heavy duty High Pressure Hose!Excellent Condition. Used only 3 times!Very Quiet running.Bonus: Bought EXTRA 25 ft Heavy duty hose,So 45 ft Total Hose!$285 firm
-
5
2.H.P.Single Phase 220 Volt Marathon Four in one 50.HZ.2850 .RPM.C.C.W.Rotation.C.W Rotation..Model.4N56B34F5328F,,never hookt to the Grid.was a spare for my Milling-machine ! 220$ or trade for Old Long Guns (Rifles) or make me a offer !
-
6
3000 watt generator very quiet barley used much electric start sold travel trailer so have no need for it anymore it’s big enough to run ac unit on trailer
Located in Williams lake bc
-
7
Looking for broken, blown up or rough 390 saws for parts. Will also take 385 saws too. Must be willing to ship on my dime.
-
8
New Echo 16” cases. $40 each
Used echo 20” case. $40
New Husqvarna 20” case. $60 SOLD
-
9
12 volt ni-cad battery.power grease.Alimite brand.it all works great does not have much use.
-
10
Oregon chainsaw chain breaker and spinner for making chain. Good condition. Comes with 3/8/404 anvil.
-
11
Looking for Dolmar 153 parts or saw carcasses. Mainly needing chain brake assembly and handle but will look at whole carcasses.
-
12
Echo SRM-410U brush cutter. New outer tube and inner drive shaft. New fuel filter and spark plug. Runs good.
-
13
NEW Picquic Multique Multi-Bit Screwdriver with Seven Bits, Slim Handle, Bright Blue Opaque. For access into deep recesses, precision work and smaller hands. Packaging is a little worn from moving. Never used.
$13 firm. Cash only.
Meet up at Petro Canada, 1401 Johnson Street, Coquitlam, V3E 3J3.
Contact me only on the day you can pick up so we don't go back and forth with messages.
Please check out my other ads. Thanks!
*** POSTING WILL BE DELETED WHEN GONE. ***
-
14
2 x Retrotec 5000 Blower Door Fan Kits
Model 5FN103992
Max CFM: 6400
*Manometer shown in picture, NOT INCLUDED.
Like New, but in great condition (used around 150-200x).
1 Kit for 3,500, 2 Kits for $6,750
Buyer pays for shipping.Please feel free to email with any questions!
-
15
Like new only used one time for an hour, comes with box of nails
-
16
Selling and buying chainsaw parts. Have lots of used parts mostly husqvarna but also have some dolmar , and jonsered.
Will buy worn, broken, blown up, unwanted saws or parts for the right price. Will take any parts/ brands if free.
Also doing saw repairs on saws. Tune ups, part replacment and complete rebuilds.
-
17
New air stapler still in box never used.
$50 Lumby.
May be able to meet in Vernon.
-
18
Automatic Grease system 12 Volt comes with 5 manifolds for a total of 50 outlets also a timer (timer can be wired out of the system) $350 OBO
High Volume hydraulic Oil Cooler 28 inchs x 4 x 12 all aluminum. Has input and output of #16 JIC no leaks. Fans were too gone to save but they were (2) 12 inch electrics, mount flange remains. $150
Twin 12 volt fan set Volume unknown approx 28 inches by 13 came from the AC system.... might fit above oil cooler $100
Hydraulic Spring load Maxi Pot 6 inch stroke 4 inch cylinder $100
Dana shift motor for two speed axle..... came off 175 dana diff3 Amber LED beacons (12 Volt) all working $20 ea
-
19
RYOBI ONE+ 18V Drill (Model #P235AVN) and charger & Ryobi One+ ( Model #P505) Circular Saw
-
20
7 1/4 works excellent
-
21
Lightweight, high-quality lanyard with an internal shocker absorber to limit the impact force from falls, reducing the chance of injury. It features durable webbing, steel snap hooks to easily attach with anchor points and it extends from 6 to 9-1/2 ft during falls.
safety line, harness,
F.A.Q.
" Is is still for sale"?
Answer............If the ad is up,,,,,,,,, it's still for sale*Replies without a contact number will be ignored* (too many scammers/spammers, waste of timers ) ; and when you leave your # type it so I don't have to decipher it ( LEAVE Spaces)
I* CAN'T** text* this is an email account linked to a PC,
-
22
1. Maximum made by Mastercraft
2. Magnetic Screw Guide
3. Seven pieces
4. Hardened alloy steel
5. 1/4" hex shank
-
23
Heavy Duty D Ring Dolly
-Barely used, no longer needed.
-800lbs capacity
Milwaukee Truck Model #30019
https://www.walmart.ca/en/ip/800lb-Milwaukee-D-Handle-Hand-Truck-Dolly/70BNCR9L9ZRC
-
24
A great dowel quick kit for any level of wood working
-
25
Husqvarna 395XP. New main bearings and seals. Crank was inspected, cylinder lightly honed and new piston installed. Carb was rebuilt. 30” 3/8 bar and chain. Saw runs great, oiler works well and chain brake works.
-
26
2X NEW 20V 3.5 AmpHour Lithium Battery for Dewalt 20 V Max XR Cordless Tools.
Chilliwack , you pickup.
$70 for 2 or $40 each prices are FIRM
-
27
Very good fencing pliers
-
28
This sprayer was never used. It comes with sprayer tip #515 and their are two other tips #313 & # 515. I have mounted the sprayer on a wheeled cart. Check Home Depot for prices
-
29
I have a large selection of these Utility Tools starting at 25 cents
-
30
SIMONZ S1600
-
31
1. Maximum made by Mastercraft
2. Magnetic Screw Guide
3. Seven pieces
4. Hardened alloy steel
5. 1/4" hex shank
-
32
Your choice for $5.00 each
-
33
Heavy Duty 1" CP796 Air Wrench
Hardly used, works very well.
New $3,000. +
Mechanic retiring.
-
34
12 drawers, 36" inches wide, 62" tall, caster wheels no dents or dings. Tools not included .
-
35
Call us with any questions 250-613-7523
PC-34 Plasma Cutter Product Specifications:
Model: PC-34
- 60A Plasma Cutter (Air)
- DC INVERTER
- Uses Compressed Air needs 40-65 PSI @ 4CFM
- Dual Voltage 110 20amp/220V 30amp 50/60Hz Auto Detection
- Maximum Cut: 1 1/4" @ 4 inches per Minute
- ALL BRAND NEW Transistors/(IGBT)
- Duty Cycle 70% @ 60 Amp
- Power Factor: 0.93
- Efficiency: 85%
- Dimensions: 18.11 x 10.04 x 15.98"
- Pilot Arc
What's In The Box?
- 1 piece x Earth Clamp
- 1 piece x Panasonic P80 torch 12ft
- 2 sets cconsumables
- Regulator & water separator w/ pressure gauge
Ships in 1 day and takes 2-8 days to arrive within Canada
Shipping is a Flat rate of $50 in Canada
We are fully accredited with the BBB (Better Business bureau) https://www.bbb.org/We hold a A+ rating
Check out our website for DEMO videos
https://www.rjrequipmentinnovations.com/product/pc-34-plasma-cutter/
All our units come with a unbeatable 3 year warranty.
We can ship COD (Cash on Delivery) with Canada Post for a $15 fee
or We accept PayPal, Visa, MC AMEX and Etransfers give us a call 250.613.7523
WE WILL NOT ACCEPT CHEQUES
-
36
Great quality tool
works great
no issues at all
used a few times
Serious buyers only!!
text me at
6046905218
-
37
BRAND NEW IN BOX!!!
Serious buyers only!!!
text me at
604 690 5218
-
38
BRAND NEW IN BOX!!
Serious buyers only!!!
text me at
604 690 5218
-
39
Great quality tool
no issues at all
works great.
serious buyers only!!
please text me at
604 690 5218
-
40
great quality.
used a few times but works great and no issues
serious buyers only.
we are moving and need space.
thanks