Buy and sell, tools with OhMy in Canada
-
1
This generator only has 12 hrs running time on it. Runs perfect , contact for more details.
-
2
Brand new. Jus taken out of package. Make offer! Will be in Saskatoon today.
-
3
The Veritas® Mk.II power sharpening system sharpens your hand tools to a degree not possible with any other method. Razor-sharp blades can be achieved in a matter of minutes. The system is so easy to use that perfect results are possible by someone who has virtually no experience sharpening blades. This set includes with 4 grades of abrasive disks (very slightly used) on two double sided platters. It is suitable for all hand tools used in the woodworking shop. The quick-change platters that mount on the turntable are made from sandwich aluminum with an inert core. The material is both stable and dead flat, creating an ideal base for the 8" diameter adhesive-backed abrasive discs available in grit sizes from 80x to 1200x. The system comes with two platters and four abrasive discs: 80x and 150x for mounting on the thick platter, and 320x and 1200x for mounting on the thin platter. Changing from coarse to fine discs automatically gives you a 1° angle increase to create micro-bevels. The system lets you accurately set the tool rest to sharpen any straight-edged tool at a bevel angle from 15° to 45° (in 5° increments) and be confident that it will be exactly repeatable time after time. Blade projection in the holder is always constant; only the tool rest height is changed. The tool rest post has positive-position detent settings at 5° intervals. The included blade holder and blade-setting jig ensure blade squareness and accurate projection every time. The Mk.II power sharpening system also allows a better degree of control and precision when sharpening tools such as gouges and V-tools. All that is required is to approximately adjust the tool rest, adjust the extension of the tool past the rest until you have the desired bevel angle, and use your fingers as a stop. This will allow the tool to be sharpened in a highly controlled manner. For many curved-edge tools (or V-tools), reduced abrasion rates are desirable to avoid going past where you want to be. You can reduce your abrasion rate by sliding the tool along the rest from the outside of the platter toward the center. The turntable is mounted in a single large double-row ball bearing to ensure rigid location and smooth operation. It is driven by a V-belt from the vertically mounted, fully sealed 1/4 hp motor. The Mk.II sharpening system operates at a quiet 60dB. Motor and turntable are mounted to a precision-machined, cast aluminum chassis to ensure proper alignment for the drive belt. Belt tension is easily adjustable by hand. Nylon dust cover included.
-
4
Model PC-14 Plasma cutter will sever up to 3/4 inch and cuts 1/2 metal all attachments are 12ft and comes with 3 sets of consumables. Also included is a air regulator with water separator. The unit will run off 110 or 220. Min 20amp breaker required. RJR Equipment Innovations LTD in a Canadian company located in Prince George B.C Check out our website for DEMO videos and specs www.rjrequipmentinnovations.com We ship COD (Cash on Delivery) with Canada Post or We accept Visa and MC give us a call 250.613.7523 Shipping is a flat rate $50 anywhere in Canada All our units come with a unbeatable 2 year replacement warranty. If you have any problems send it back to us COD and we will ship you a new or refurbished unit so very little down time. Canada only please WE WILL NOT ACCEPT CHEQUES
-
5
large smith weld cutting torch with 2 extra tips....will cut 4" steel plate 21" long and a short barrel torch 10" long
-
6
Mastercraft miter saw table c/w extension arms and storage arms
-
7
greenlee type 24 spool wire caddy good shape fast easy pulls and wire storage fits threw doorways handles all size spools unit is worth 1200+ when new
-
8
Selling a brand new 6'×8' yellow transparent vinyl welding screen (curtain). Please see link below for more information. Sorry but I don't have any pictures of the assembled screen. https://steinerindustries.com/protect-o-screen-classic/product/protect-o-screen-classic-welding-screen Please note: If the item for sale is still posted it is available (I will not respond to emails or messages asking if the item is still available) When the item sells it will be immediately removed from Kijiji.
-
9
2 wheeled hand truck with pneumatic tires and lightweight aluminum frame. 400 pound capacity. Tires are 4"x10" diameter. Please note: If the item for sale is still posted it is available (I will not respond to emails or messages asking if the item is still available) When the item sells it will be immediately removed from Kijiji.
-
10
Selling 3 Bessey 12" sliding arm bar clamps. Opens to 12" with a throat depth of 5.5" and rated at 2, 660 lb . Asking $85.00 each or all three for $230.00. Please note: If the item for sale is still posted it is available (I will not respond to emails or messages asking if the item is still available) When the item sells it will be immediately removed from Kijiji.
-
11
Rockwell 10 inch 120 volt 13,5 amp, tablesaw homeused only , in good condition. asking $150
-
12
1/2 hp ROK bench grinder in new condition. (Decided to stick with my old one.) $50.00
-
13
1 ONLY USED CNC TURRET PUNCH MAKE AMADA MODEL VIPROS 255 TONNAGE 22 TONS YEAR 1999 MAXIMUM SHEET SIZE 50" X50" MAXIMUM PUNCHING CAPACITY 1/4" MAXIMUM HOLE SIZE 3.5" RAM STROKE 1.575" (ADJUSTABLE) RAPID FEEDRATES 2,559 IPM/1,968 IPM TURRET STATIONS 31 WITH (3) A/I TURRET STYLE THICK OVERALL DIMENSIONS 9' X 16' X 7' H WEIGHT (APPROX) 21,400 LBS EQUIPPED WITH FANUC 18P CONTROL EQUIPPED WITH BRUSH TABLE EQUIPPED WITH CHILLER EQUIPPED WITH HYDRAULIC UNIT EQUIPPED WITH ASSORTED TOOLING EQUIPPED WITH 2 WORK CLAMPS MACHINE CAN BE INSPECTED UNDER POWER THANK YOU MARK ROSS RMS MACHINERY INC. TEL: 514-944-6048 markross1994@yahoo.ca
-
14
NOTCHER MAKE AMADA MODEL CSW-250 CUTTING CAPACITY 1/4" STEEL SIZE 10" X 10" X 1/4" EQUIPPED WITH VARIABLE DEGREE BLADES EQUIPPED WITH 3 HP MOTOR EQUIPPED WITH PORTABLE FOOR PEDALE VERY LITTLE USE ON THIS MACHINE EXCELLENT CONDITION PURCHASED NEW IN 2000 THANK YOU MARK ROSS RMS MACHINERY INC. 514-944-6048 markross1994@yahoo.ca
-
15
Clé fermé snap- on 1 7/8 po 12 ecarts xh160a avec manche snap -on 30a long hors tout 37 po laisser no tel voir mes autres publications
-
16
Génératrice diesel Moteur bellarus Parfait conditions 13000 Watt 2300$ Cell Renaud418-225-1512 Cell Yvon Loubier 450-223-4810 Domicile 450-799-4810 Par téléphone seulement placer annonce pour un autre
-
17
THREE LOCATIONS TO SERVE YOU PICKERING - TORONTO - BRAMPTON See addresses below Visit our website For More Tools http://www.chtools.ca PEX Crimp Tool, 1/2" and 3/4" Reg$120 Sale$ 49.99 Crimp sizes: 1/2" and 3/4" Works with 1/2 In. and 3/4 In. PEX copper crimp rings Lightweight handles reduce fatigue No tools needed to change between dies 5 times crimps calibrations Go/no-go gauge -------------------------------- PEX 1/2" PEX Crimp Tool Reg$120 Sale$ 41.99 ------------------- PEX 3/4" PEX Crimp Tool Reg$120 Sale$ 41.99 ------------------------------- PEX 1" PEX Crimp Tool Reg$120 Sale$ 44.99 -------------------------------- 1/2-in to 1-in Pex Crimp Ring Removal Tool Reg$50 Sale$25 Works with 1/2 In., 3/4 In., and 1 In. PEX copper crimp rings Rubber handles Importer warehouse Sale Direct to the Public CANADIAN HARDWARE & TOOLS Visit our website For More Tools http://www.chtools.ca OUR STORES First Location ------------------- Canadain Hardware & Tools 1050 Brock Rd, Unit 12 & 13. Pickering, ON L1W3X4 Pickering Phone: 905-839-7555t Monday To Friday 9am-5pm Saturday: 10am-4pm Sunday: CLOSED Second Location ------------------------- Canadain Hardware & Tools 1805 Wilson Ave.Uint No 104 Toronto, ON M9M 1A2 Toronto Phone: 647-748-5007t Monday To Friday 9-30am-6pm Saturday: 10am-6pm Sunday: CLOSED Third Location ------------------------- Canadain Hardware & Tools 2 Melanie Dr unit #6 L6T 4K9 Brampton Phone: 905-799-0699t Monday To Friday 9am-5pm Saturday: 10am-4pm Sunday: CLOSED
-
18
Currently providing North America with competitive pricing on a diverse range of products. Visit www.bcextractsupply.com or email for a custom quote. Hydroponics, Growing, Extractors, Air Conditioners, Gavita, Green Planet, Boveda, Integra, Remo, Advanced Nutrients, Grotek, Air Purification, Fluorescents, Reflective, Bubble Bags, Fans, Filters, Mufflers, Chillers, Heaters, Freeze Dryers, Vacuum Ovens, Vacuum Pumps, Cyco, Botanicare, Canna, Cultured Solutions, Emerald Harvest, House & Garden, Nutrilife, Suite Leaf, Lamps, Magnetic Ballast, Ducting, Odor Control, Flip Boxes, Solutions, Soil, Plant Support, Safety Equipment, Growing Mediums, Propagation, Root Stimulants. Trellis, Grow Tents, Pots, Containers, Harvest, Trimming, Climate Control, Current Culture, Irragation, Aeration, Sprayers, Wands,
-
19
Bench drill press with vice.
-
20
In excellent shape. Comes with spare blade. manuals and stand.