Buy and sell, Tools with in Canada.
-
1
Works, sold as is.
-
2
Delta band saw.
Good condition
Little use
-
3
Infrared Temperature Readers. new in box. 1 from powerfist @ $50. 2 from mastercraft @ $55. [I am keeping my $120. powerfist] [these items come in many prices and qualities, different specifications]
handy for many uses but a near must for final carb adjusts when trying to synchronize multi carbs on small engines? exhaust gas temp. is the best indication.
email rtkaos@gmail.com
-
4
This industrial caliber disposal unit has a foot pedal actuated lid with industrial quality levers. Includes correct rubber/plastic inner container. This unit has virtually never been used & is in like new condition, clean, never sullied. Manufactured by White, works perfectly. Shipping cost is extra or drive up for pickup. E-mail inquiries please.
-
5
It's been sitting but has never been used
Pade over 2000
this was for a 200 kva generator
-
6
Expired service life from Kal Tire Always maintained at Kal tire.
2 center lifting jacksAll works as intended.
Cash only No PayPal
Quesnel
Call or Text 250-747-2324
-
7
Professional tools, Blue Point inner tie rod wrench $45, Snapp on fuel injection tester $35, Multi spline clutch alignment jigs $30, gear lube pail and pump 1/3 pail $20, Engine stand 750 lb $25 All OBO
-
8
I'm selling a good mallet that I don't want to give up
-
9
Tirfor for sale new condition used one job 2500 kg pulling 1500 kg lifting , 100. Foot 7/16 cable with hook ready for use do not need any more
-
10
Husqvarna 365 x torq with 28 inch bar and chain
-
11
Drill, 2 batteries,, charger. Purchased new in summer 2019.
-
12
Miller 325 diesel welder with excel power runs all tools at idle brand new low hours . Comes with 100 feet of each lead. Mi-T-M 30 gallon diesel air compressor brand new as well very low hours comes with 100 feet air line. Have all manuals and recipes have covers for both , also have suitcase welder for welder . Will separate .welder $11000,compressor $5000, suitcase welder $2500 or all for $17500 paid over 25k for all
-
13
Full kit all in good shape
-
14
Husqvarna 455 Rancher, 18" bar, chain like new, 55.5 CC, Low Vibe Handle, X-torque Engine, Built in fuel pump primer. Very little use. Reason for selling I need a bigger saw for felling. Original case included.
-
15
Vintage MWH Co Brace with 8" throw and with 18 inch extension and #15, 7/8 inch bit
-
16
Vintage Industrial Cast Iron Saw Blade Clamp Vise for Workbench Sharpening with no markings but dating to early 1900's. Vise clamp is 9 inches wide.
-
17
Vintage 19 Inch Logging Cant Hook For Turning Logs
-
18
KAGAN Ring Sizer
Made in the USA.
$125
-
19
Good used propane heaters for sale.
6 at 150$ each.
Same as photo but used.
-
20
Check out our website for DEMO videos and specs
www.equipmentinnovations.comModel PTA-500 $1499 plus tax ON SALE $1099
Plasma cutter will sever up to 3/4 inch and cuts 1/2 metal
powerful 200amp Stick and Tig welder. Comes with all attachments and 3 sets of consumables for the Tig and Plasma. Also included is a air regulator with water seporator. The unit will run off 110 or 220.
RJR Equipment Innovations LTD in a Canadian company located in Prince George B.C
We ship COD (Cash on Delivery) with Canada Post
or We accept Visa and MC give us a call 250.613.7523
Shipping is a flat rate of $35 in B.C and $45 anywhere in Canada
All our units come with a unbeatable 2 year replacement warranty. If you have any problems send it back to us COD and we will ship you a new or refurbished unit so very little down time.
WE WILL NOT ACCEPT CHEQUES
-
21
FINANCING AVAILABLE - 1(844)440-4014 - WWW.HOCANADA.COM
The House of Contractors electric pallet jack is designed to effortlessly move heavier loads with these quiet, self-propelled pallet trucks. Load and unload delivery and transfer trucks.
Features- Push-button lift controls and forward/reverse thumb wheels on an ergonomic handle. Reverse safety switch keeps operator safe.
DC free maintenance motor, without carbon brush.
- Maintenance-free batteries (24V/60AH battery) with internal charger.
- Polyurethane wheels.
- 180° steering arc.
- Electric Pallet Truck – 5 hours service per charge. Compact design moves easily in narrow warehouses and retail aisles.
Specs
- Load Capacity: 1500 kg (3307 lbs)
- Outer width: 26.75 In
- Inner width: 14 In
- Length of fork: 47 In
- Width of fork: 6.25 In
- Maximum height raised: 7.5 In
- Minimum height relaxed: 3.25 In
- Dimensions: 63.75 L x 26 W x 52 H
Price Includes a 1 Year Warranty + Free ShippingHouse of Contractors Inc.
1(844)440-4014
www.hocanada.com
-
22
ECV2 2.2 Hp Electric Concrete Vibrator
Immerse the head of this concrete vibrator into wet concrete to release any trapped air and excess water to allow the concrete to settle within the formwork properly and solidly. The vibrator is lightweight for less fatigue and the 16 in. vibrating head delivers speeds up to 4000 RPM to get the job done quickly.
Features
- Lightweight and easy to use
- Protective metal roll cage
Specs
- Model ECV2
- Power cord (ft.) 13 ft
- Shipping Weight 33.06 lb
- Shaft Diameter 1-7/16 in
Price Includes 90 Day Warranty + Free Shipping
House of Contractors
1(844)440-4014
www.hocanada.com
-
23
this is an engineering/drafting instrument for drawing large radii
-
24
1 1/2” wrench
Great shape
No longer needed
-
25
3 harvester blades. Appear to be new asking 75 for all of them .size in pics.
-
26
Carbon-steel blade. Handle is 5.5 inches long, overall it is 27 inches long.
-
27
Like new condition used once. Works well used for a project and no longer need it. Comes with
one battery and charger.
-
28
stihl 028 quality chainsaw parts
piston and barrel are in excellent shape, both free moving
I think these are 028 stihl parts, $20 and up. I have other models for parts, let me know what you need
-
29
this is a good shape harness for a Husqvarna brush saw
-
30
2 years old , Low hours , home use , Quiet and Fast charging , 4.8 SCFM , small storage case for attachments , Belt As New , Gauges work well . Please email for Viewing Time . Thanks for Looking
-
31
Stop living in the dark ages!!
If you spend any time in your garage, workshop, attic or any other workspace you know the value of good lighting. Unfortunately most high output lighting costs a boatload to run and has a very short lifespan.
Our high output LED lighting options are the answer.
** Up to 800% Brighter than traditional options
** No Warm up time required
** Rated for 50,000 hours
** Use 70% less energy
Visit our online store at http://bit.ly/garageled
Upgrade your lighting today and save on your first order.
-
32
1-844-440-4014 House of Contractors Inc. www.hocanada.com
Features- Air Delivery: 1,000 L/min
- Motor Power: 11 kw / 15 hp
- Max. pressure: 30 bar/ 435 psi
- Pump Speed: 650 rpm
- Product description: Belt Drive Air Pump BM150 - Industrial
- Max Pressure: 30bar /435psi
- Body Material: Cast Iron CE approval
- Cylinders: 3 - Two finned intercooler pipes
- Flywheel: 13 3/4 inch (36.83 cm) x 3 1/8 inch (7.93 cm) wide, 4 belts
- Fan 25.5 inch (65.08 cm)
- Height (Base to Top of Filter): 25 inch (63.8 cm)
- Height (Fan to Top of Filter): 29.5 (75.25 cm)
- Overall Length: 29.5 (75.25 cm)
- Overall Width: 21.5 inch (54.9 cm) - without filter
- Shaft Diameter: 50 mm
- Outlet: 1.0 inch NPT (National Pipe Thread) plus 90 degree elbow adapter to 33 mm metric thread with 26 mm tubing sleeve
- Air Filters - Metal housing 1 inch NPT
- Model BM150
- Air Delivery 1,000 L/min
- No. Of Cylinder 3 with two stage
- Motor Power 11 kw / 15 hp
- Pump Speed 650 rpm Max Pressure 30 bar /435 psi
- Body Material Cast Iron
- Pulley diameter450 + 650 mm
- Inlet unloader without
- Feature medium pressure
- N.W. 150 kg
Price Includes Free Shipping + 1 Year Warranty
House of Contractors Inc.
1(844)440-4014
www.hocanada.com
- Air Delivery: 1,000 L/min
-
33
FINANCING AVAILABLE - 1(844)440-4014 - WWW.HOCANADA.COM
ET15MH Semi Electric Power Drive Pump Truck 1500 kg (3300 lbs) Capacity
The House of Contractors Inc. ET15MH Semi-electric pallet jack features powered drive and manual lift allowing the operator to easily lift and transport materials weighing up to 3,300 lbs. This economical electric pallet jack features 24v powered drive, an electromagnetic automatic disk brake system, and a three position (lift, lower, neutral) pump handle and digital battery meter. Ergonomic handle houses forward/reverse buttons, a safety reverse belly switch and 2 kill switches. Travel speed is 2.5 mph empty and 2.0 mph loaded. Two maintenance free 12v 30AH batteries, an integral 110v plug in smart charger, and battery discharge indicator come standard with the unit. This versatile powered pallet jack has a lowered height of 3.25” and a maximum lift height of 8.0”. The forks on the House of Contractors Inc. EPT20 forks are 26.75”W x 48.0"L making this semi-electric pallet jack ideal for moving standard pallets and skids.
Features
- Electric Key Start
- Battery charge indicator
- Estimated run time per charge: 5 hours
- Travel speed is variable from 0 to 2.5 mph unloaded, and from 0 to 2.0 mph loaded
- Turning Radius: 56
- Electromagnetic disc brake
- 3 position (lift, lower, neutral) handle houses forward/reverse buttons, safety belly reversing switch, & 2 kill switches
- Fully sealed hydraulic pump and hardened chrome plated lift cylinder
- Rolls smoothly on 8.3" x 2.7" polyurethane drive wheels and 2.9" polyurethane x 4.7" front load wheels
- Load Capacity: 1500 kg (3307 lbs)
- Outer width: 26.75 In
- Inner width: 14 In
- Length of fork: 48 In
- Width of fork: 6.25 In
- Maximum height raised: 8 In
- Minimum height relaxed: 3.25 In
- Dimensions: 63.0 L x 26.75 W x 51 H
- Weight with battery: 120 kg (265 lbs)
Price Includes Free Shipping + 1 Year Warranty
House of Contractors
1(844)440-4014
www.hocanada.com
-
34
Wacker WP1550 Plate Compactor + Water Kit
This plate compactor has undergone a 15 point inspection by our specialized Wacker Neuson technician and is in incredible shape.
The WP premium plate series feature a computer designed base plate that has a tapered bottom and edges for high speed and excellent maneuverability. Designed for the compaction of granular, mixed materials with some cohesive content. Water tank models are available for asphalt applications. These plates have set the standard for performance and durability in confined areas such as parking lots, highway and bridge construction, next to structures, curbs and abutments. WP plates are also popular for landscape applications for subbase and paver compaction.
Features
- Engine compression ~ 100%
- Speed ~100%
- Lightweight, high-strength components keep machine weight down and allow for easy handling.
- Straight, center-mounted guide handle offers superior maneuverability and can be lowered within inches of the surface to operate the plate under obstacles and form work.
- Tough, wear resistant ductile iron base plate offers durability and shock resistance.
- Water tank models have a large capacity polyethylene tank that includes a large filter inside the tank to prevent clogging during operation and can be easily removed for cleaning and draining.
- Asphalt models include a spray bar with angled holes to allow for complete water coverage for no asphalt pick up on the plate bottom.
Specs
- Model: WP1550
- Engine: air-cooled, 4 cycle, single cylinder, gasoline Honda GX160 engine
- Weight: 196.2 lbs
- Centrifugal force lbfs: 3375
- Base Plate: 19.6 x 22.8
- Hp: 5.5
- Advance travel ft/min: 82
- Power transmission: Power transmission from engine via centrifugal clutch and V-belt onto exciter which transmits centrifugal force onto baseplate
Price Includes Free Shipping + 90 Day Warranty!
House of Contractors Inc.
1(844)440-4014
www.hocanada.com
-
35
FINANCING AVAILABLE - WWW.HOCANADA.COM - 1(844)440-4014
This item was a trade in and runs perfectly. It has also undergone a 15 point inspection by our specialized Wacker Neuson technician.
Wacker Neuson's 4 stroke rammers are designed for high performance and long life. The high stroke energy, high percussion rate and long shoe stroke combined with a fast advance travel achieve excellent compaction results. The compact design and low center of gravity is ideal for the compaction of cohesive and mixed soils in trenches and other confined areas.
Features
- Easy to start and simple operation. Convenient single-lever operation for start-up, idling and shut-off
- Low oil protection: When starting the unit, a sensor detects no or low oil and does not allow the engine to start, protecting the engine
- A unique four-stage air filtration system provides a virtually dust-free engine for longer life and improved durability. The system includes a last chance filter that protects the engine during air filter maintenance
- Wacker Neuson Engine
- Item number #1017
- Manuf. 2019
Specs- Model: BS50-4
- Engine: air-cooled, 4 cycle, single cylinder, gasoline WM90 Wacker Engine
- Weight: 143 lbs
- Impact force lbf: 3597
- Ramming shoe size (WxL) in: 11 x 13.4
- Hp: 3.0
- Operating speed ft/min: 23.3
- Manufacture Year: 2015
Price Includes Free Shipping + 90 Day Warranty
-
36
BS50-4 Wacker Jumping Jack
This item was a trade in and runs perfectly. It has also undergone a 15 point inspection by our specialized Wacker Neuson technician.
Wacker Neuson's 4 stroke rammers are designed for high performance and long life. The high stroke energy, high percussion rate and long shoe stroke combined with a fast advance travel achieve excellent compaction results. The compact design and low center of gravity is ideal for the compaction of cohesive and mixed soils in trenches and other confined areas.
Features
- Easy to start and simple operation. Convenient single-lever operation for start-up, idling and shut-off
- Low oil protection: When starting the unit, a sensor detects no or low oil and does not allow the engine to start, protecting the engine
- A unique four-stage air filtration system provides a virtually dust-free engine for longer life and improved durability. The system includes a last chance filter that protects the engine during air filter maintenance
- Wacker Neuson Engine
- #W17
Specs
- Model: BS50-4
- Engine: air-cooled, 4 cycle, single cylinder, gasoline WM90 Wacker Engine
- Weight: 143 lbs
- Impact force lbf: 3597
- Ramming shoe size (WxL) in: 11 x 13.4
- Hp: 3.0
- Operating speed ft/min: 23.3
- Manufacture Year: 2015
Price Includes A 90 Day Warranty + Free Shipping!
House of Contractors Inc.
1(844)440-4014
www.hocanada.com
-
37
Heavy duty Utility blades designed to easily cut a variety of construction and flooring materials.
Sold by box of 5 - 100 packs (Total of 500 blades):
https://www.keepitdirect.ca/replacement-utility-blades-box-of-5-100-packs/
Free shipping on $100 orders
Features:
Heavy duty - 0.6mm thick
2-7/16 long
Made of high quality carbon tool steel
Blade dispenser included to house each 100-pack of blades
Fits into most standard utility knives
Buy more, Save more:
Buy 1 or more boxes and pay $44.95 per box ($8.99 per 100 pack)
Buy 4 or more boxes and pay $39.95 per box ($7.99 per 100 pack)
Buy 8 or more boxes and pay $34.95 per box ($6.99 per 100 pack)
Buy 32 or more boxes and pay $31.95 per box ($6.39 per 100 pack)
More blades available on www.keepitdirect.ca
-
38
remorque et échaffaux, 1 plateforme, 10 verrins $ 2500.00
819-293-7371
-
39
Pompe a eau model 53200c 5320AHRD arbre 9/16 sortie1/2 le body est en brasse par téléphone SVP 819 477 1852
-
40
- Grille de métal.
- Plusieurs grandeurs en inventaire.
- 1$/pied carré.
- Matériaux et surplus Lefebvre.
- 450-568-2691
-
41
Pôle-chocker PC4 de 6 pied
flambant neuf , toujours dans le sac
plus de besoin valeur de plus de 600$
à vendre pour 500$
peut-être livrer entre st-bruno et drummondville, je fait le chemin chaque jours.
-
42
Perceuse à colonne neuve 12 vitesses, Model CH30, moteur 2hp. rpm 180 à 3440. Avec un chuck de 1-19mm, 1/32"-3/4" JT3. Avec une table de travail de 16"x13 1/2".
-
43
Scie à onglet Milwaukee M18, fonctionne très bien. Pratiquement jamais utilisé. Utilisé simplement pour quelque rénovation à la maison. Vient avec batterie 9 amp, chargeur et je laisse le “stand” portatif avec.
Raison de la vente: Change de modèle pour une qui contrôle plus la poussière.
-
44
Perceuse Mastercraft elle est a colonne avec plateau ajustable ,fonctionne tres bien vous pouvez l'essayer :)
819-336-5988 Tony.
-
45
J'ai 2 drills électriques marque deWalt:1) drill 3/8,type 2, 6.7 amp, 0-1200 rpm $60.00--2)drill 3/8 ,type 1, 5.4 amp, 0-2500 tm $50.00---J'ai une scie va-et-vient marque deWalt ,0-2400 rpm, 6.5 amp $75.00---819-478-3206
-
46
torque wrench usage, calibration mise a jour , 120lb/ft - 600lb-ft
se vend plus de $2000
livraison incluse
-
47
7 bobines de fil a souder aluminium neuves, 3x 0.9mm et 4x 1.2mm, vendu en lot seulement, demande 120$ appeler 819-461-2810
-
48
Hunt in a very unique way 😍
-
49
Our Type F Standpipe Pressure Gauges are highly reliable and robust and is equipped with an easy-to-view, liquid filled and full faced dial to capture accurate readings. These Standpipe Pressure Gauges are even capable of withstanding rig vibrations, over-pressure situations and kicks etc.
For more info Call us at 780-955-899 or to order online visit us at:https://www.contactinstruments.com/mdse/standpipe-pressure-gauge-f.html
-
50
Nice shooting, stability and good material 💯✅⛰️