Cars & vehicles, Heavy equipment with in Canada.
-
1
54in.
New Used : Used
Condition : Good
Fuel Type : Gas
Engine: Kawasaki
-
2
DD15 Eaton 18 sp automatic 373 rears truck is in great shape new clutch new water pump new batteries one box replaced a year ago wiring harness just done new air bags shocks rad 2 years old inlet and outlet nox sensor just done 1.2 kl set up for tanker equipment will be removed but can be purchased for extra tires are year old has APU bunk heater fridge also dinet set up 519-383-9088
-
3
Luma Manufacturing builds and sells stainless steel meter housings for John Deere 1910 Air Carts and Morris 6000/7000 Series Air Carts.
Luma Manufacturing's custom stainless steel meter housings are built to last and can withstand years more of wear than the standard steel material. Our meter housings are built as one solid unit, using only stainless steel and no composite materials. There is two access door panels that allow for easy maintenance and cleaning. Luma Manufacturing provides heavy-duty products that are tested and trusted by farmers across North America.We also offer a large selection of 100% stainless steel meter body parts; couplers, expansions, run covers, plates, brackets, hardware and more.
New Products! Stainless steel diffusers and splitters.
We offer custom bending and sell stainless steel tubes for air carts and strip tillers.Quick couplers:
Can be used with any OEM.
1.5 inch x 4 tubes - CAD$500/set
2 inch x 4 tubes - CAD$500/set
2 inch x 6 tubes - CAD$650/set
2.5 inch x 4 tubes - CAD$500/set
2.5 inch x 6 tubes CAD$650/setTo view more stainless steel products, buying info, contact info, testimonials & more; visit lumamfg.com
We also sell a large selection of stainless steel parts for John Deere air drills and planters.
Please call or email if you have any questions.
We Ship Anywhere in North America.The Benefits of Stainless Steel Meter Housings and Parts
-Durable high quality 304 stainless steel; stainless steel last longer and is resistant to corrosion.
-Easy to install and built to fit seamlessly with OEM parts.
-Pieces are cut and bent with precise technology to ensure consistent performance during its lifetime.
-Built to be replaced seamlessly with older steel part; allowing for a far more superior build material while offering at a competitive price compared to dealers.
-Stainless steel parts last much longer than the standard steel, it requires much less maintenance and servicing over time.
-Luma Manufacturing’s meters and parts have been tested and trusted for years by farmers.
-Can be compatible for Section Control and Section Command.
-Luma Manufacturing meters are the only ones on the market that are made completely of stainless steel.
-
4
2009 Kenworth T800 (manufacture date on door reads June 2008)
CUMMINS ISX (485HP)
398,666KM w/ 14,500 HRS
18spd.Bibeau Steel box. Truck was working daily up until the end of 2023 - it had a permit to haul that expired - truck does not have SPIFF. Solid, well running truck, LOW KMS, well maintained. Truck does have some frame issues to be addressed. We know the cost of upgrading to SPIFF, price has already been adjusted to reflect that. For sale as is!!!
-
5
1999 Volvo ved12 engine ,runs great can be heard, or buy whole truck $7500
-
6
Good Year 320/85-46 Mud Rice Tires
$250 a peice
Call or Text 519-331-5008
-
7
2015 John Deere 1795 CCS Planter 16r30”/32r15”
s/n 1A01795CLEA760342MaxEmerge 5 Package
Central Commodity System
Two Point Hitch
Variable Drive with Two Hydraulic Motors with Half - Width Disconnect
Pro-Shaft Drive with RowCommand Clutches Every 2 Rows
Tru-Vee Openers with Single Walking Gauge Wheels
Pneumatic Down Force System
Rubber Tire Closing Wheels
SeedStar Monitor System Less Display, Less Radar
Regular Seed Tube with AccuCount Sensor
Unit Mounted Coulter with 0.63 In. 25 Fluted Blades
Tri-Fold Markers with 16 In. Notched Disk, (Removed, Available)
Regular Parallel Arms
Dual Vacuum Hydraulic Flow Control Valve
32 Soybean Seed Metering Disks
16 Corn Metering Discs2 Independent Liquid Systems:
- In-Furrow with Keaton Seed Firmer Applicators
200 gal tank, 2 Surefire electric pumps, John Blue Controller
- Nitrogen application behind closing wheels with 4 tanks 340gal total,
4 Surefire electric pumpsPlanter is in good condition, always stored in shed, but not yet field ready - needs some minor usual post season maintenance some corn unit bushings etc. just put it in the shed after last acre spring 2023. Seed discs 90%, rubber is good, liquid systems have a few leaks needs some tidying up.
Reason for selling - switch to 20”.
-
8
Absolutely mint Model 709 Backhoe attachment. Look at original paint on bucket! Little bit of UV fade but other than that it is like new. Make your skid steer more useful.
-
9
Available for rent, servicing the Salmon Arm to Revelstoke area! Brand new Sunward 35 Excavator and 2830 Skid Steer (equivelant to JD324G).
Please email for rates, availability and delivery.
Okanogan Equipment Rentals
-
10
Good shape, hydraulic tilts and swivel, offset, levelling wheel, solenoid drop out for levelling wheel.
-
11
2005 Peterbilt 335 single axle 2000 gal water truck, Cat C7 260 hp, 6 speed transmission. Water tank and pumping system new in 2016, new PTO in 2023. Good condition, well maintained with records available.
-
12
2017 Kenworth T800
550 isx cummins rebuild by inland Kenworth may of 2023 remaining balance 1 yr warranty with paperwork
17300hrs
Bridgestone steer tires
Winter drive tires
Duel steer boxes
New steer axle brakes
New driveline between both rear ends
New fan hub
Hendrickson primax suspension
Grey diamond interior
2019 Arctic quad beam suspension 9’6 bunks all the way around
Brand new PNT scales ($5600)
Tare 19800ish clean without all the winter chains.
If ads up still available not repsponding to is it still available serious inquiries only
$220,000 + gst
$175,000 + gst just truck no rigging bare frame
-
13
Auckland’s ( Hobart) 225 Amp gas drive welder. Excellent condition and HD frame protector. Good to go.
-
14
Manufacturer: Thomas
Model: T133S
Hours: 3,297
Includes: Bucket and Pallet Forks
Condition: Used, Runs well
Year: Unknown
-
15
Sentag Modular Manufacturing produces a multitude of mobile modular office trailer designs and layouts. From smaller wheeled modular buildings to large skid mounted offices, it is easy to find a relocatable structure to fit your requirements.
RENTALS | NEW & USED SALES | LEASE TO OWN | CUSTOM BUILDS | TRANSPORTATION | INSTALLATION | SERVICE
New and Used Units Currently in Stock 8' x 20', 10’ x 24’, 10’ x 32’. 12’ x 40’, 12’ x 60’
FOB Edmonton, AB
Phone: 780-454-6517
9825 283 Street, Acheson, Alberta
www.sentagmodular.com
-
16
Serco loader ,
Mostly everything needed to get her goin .
No grapple
Bought it as a spare loader on a truck purchased.
Mike 250 344 8491
15,000 or best offer
Trades welcome
-
17
NEW 1-800-361-4095 **** 2021 ******* GP-10 MONDIAL AUTOMOTIVE EQUIPMENT, GP-10 is an asymmetric lift with 10000 lbs capacity. - Double cylinder,Steel pulleys and equalizing cable system. - - motor / pump 3 hp - 220 volts.
Combo (Symmetrical and Asymmetrical) Arm Assembly
Straight Front/Rear 3 Stage reach from 22 7/8" to 42 5/8"
Straight Rear 2 Stage reach from 33 5/8" to 52 7/8"
Screw-in pads 4 pieces included
Truck adapters 4 pieces included
Double point safety lock release
Automatic arm lock restraints
Relief valve built in power pump to prevent overloading
Door guards protection rubber
Up-limit switch to protect cylinders working stroke used in safe length scope
Heavy duty 3/8" diameter cable and 5" pulley that reduce high stress on synchronization process and increase cable life
Ultra high molecular self lubricating nylon slider that ensures carriage smooth moving up and down
Lifting operation by pressing "UP" button on motor
Manual lowering operation by pressing lever
Relief valve built in power pump to prevent overloading
Overall Height: 144"
Overall Width: 134 5/16"
Maximum Lift height with Truck Adapters: 81"
Maximum Lift height without Truck Adapters: 75"
Minimum Height of Arm Top: 4"
Carriage to Carriage Width (Drive through clearance): 100"
Column to Column Width: 109"
Column Cross Section: 11"L x 7"W
Driving Mode: Dual hydraulic cylinders, chain drive
Motor: 220V Single Phase 3HP 10A (recommend a 30A breaker)
Hydraulic Oil: 3-5 gallons AW32/AW46
Lifting Capacity: 10,000 LB
Time to full rise: 50 sec
Concrete Requirement: 5" thick at 3500 psi reinforced with fiberglass or steel (4" thick for vehicles 9000LB and below)
Anchor bolts/mounting hardware included
Tool trays and toe guards included- Warranty is 1 year on parts and 5 years on the structure.
-Transport service and delivery available across Canada
See my other ads !!!!!!
For more information contact us Tel:1-800-361-4095Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
18
I have several used skidder winches,some parts and controls for sale Gearmatic-8 ,9 ,119,Cancar 20,Hercules,Cargo,if interested CALLS ONLY 1-506 433-0343;THANKYOU.
-
19
Shop Manual for a Model 80 Galion Crane 1981 Asking $10.00 No Shipping Local pickup only
phone 902 860 1224
-
20
2 USED TRACKS SIZE 300X52.5X86 VERY LITTLE USE ON TRACKS AT 90 PERCENT IN STOCK WE ALSO SELL NEW TRACKS (( STEVE DALE AUTO & EQUIPMENT LTD )) CALLS ONLY 506 461 3657
This Size Fits Case CX35, Case CX33C, Case CX37C, Ditch Witch MX35, Ditch Witch MX352, Doosan DX35Z, JD/Hitachi EX35U, JD/Hitachi ZAXIS35U2, JD/Hitachi ZAXIS35U2, JD/Hitachi ZX35U-2, JD/Hitachi 35D sn < 265713, JD/Hitachi 35G, JD/Hitachi 35ZTS, JD/Hitachi 35C, JD/Hitachi ZX35ZTS, JD/Hitachi 35D sn > 265712, Hyundai Robex35Z-9, Hyundai R35Z-7, Komatsu PC30MR, Komatsu PC30MR, Komatsu PC30MR-2, Komatsu PC30MRX, Komatsu PC35MR-2, Komatsu PC35MR-3, Komatsu PC30UU-3, Komatsu PC35MR-5, Nagano NS35-2A, Schaeff HR3.7, Terex TC37, Sany SY35C, IHI IS 30NX-2, Hitachi EX 35U, John Deere 30G, New Holland E37
-
21
TEL: 1-800-361-4095 ******* Tire changer • It allows to dismantle and mount tires on steel and alloy wheels up to 21"in diameter • Plastic protectors are provided to for the alloy wheels.
- One year warranty on parts. We have all spare parts in stock. -Transport service and delivery available across Canada
-4 post parking lifts available Other garage equipment available.
-Transport service and delivery available across Canada
See my other ads !!!!!!
For more information contact us Tel:1-800-361-4095Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
22
MK Martin SB68 Snowblower
New 2023 model assembled in Winter 2023. Has minor fade and small rust here and there. Never been used. New-old stock.
68" Cutting Width
14" Auger Diameter
21" Fan Diameter
25" Body Height
Cat 1 Hitch
Adjustable Skid Shoes
Manual Chute Rotation (Optional Hyd)
Manual Chute Deflector (Optional Hyd)
PTO with Shear Bolt
2 Left In StockRegular 2024 Price - $4275 Plus Tax
One Only (Of Each Color) - $3950 Plus Tax
Will cut PTO shaft for free to customer's desired length.
For more info, please email, text or call:
Central Equipment
Kentville, NS
902-678-0866 Ext 3
902-790-3941 Cell
-
23
NEW 1-800-361-4095 **** 2021 ******* GP-9 MONDIAL AUTOMOTIVE EQUIPMENT, GP-9 is an assymetric lift with 9000 lbs capacity. - Double cylinder,Steel pulleys and equalizing cable system. - - motor / pump 3 hp - 220 volts.
Combo (Symmetrical and Asymmetrical) Arm Assembly
Straight Front/Rear 3 Stage reach from 22 7/8" to 42 5/8"
Straight Rear 2 Stage reach from 33 5/8" to 52 7/8"
Screw-in pads 4 pieces included
Truck adapters 4 pieces included
Double point safety lock release
Automatic arm lock restraints
Relief valve built in power pump to prevent overloading
Door guards protection rubber
Up-limit switch to protect cylinders working stroke used in safe length scope
Heavy duty 3/8" diameter cable and 5" pulley that reduce high stress on synchronization process and increase cable life
Ultra high molecular self lubricating nylon slider that ensures carriage smooth moving up and down
Lifting operation by pressing "UP" button on motor
Manual lowering operation by pressing lever
Relief valve built in power pump to prevent overloading
Overall Height: 143 3/16"
Overall Width: 134 5/16"
Maximum Lift height with Truck Adapters: 81"
Maximum Lift height without Truck Adapters: 75"
Minimum Height of Arm Top: 4"
Carriage to Carriage Width (Drive through clearance): 100"
Column to Column Width: 109"
Column Cross Section: 11"L x 7"W
Driving Mode: Dual hydraulic cylinders, chain drive
Motor: 220V Single Phase 3HP 10A (recommend a 30A breaker)
Hydraulic Oil: 3-5 gallons AW32/AW46
Lifting Capacity: 9,000 LB
Time to full rise: 50 sec
Concrete Requirement: 6" thick at 3500 psi reinforced with fiberglass or steel (4" thick for vehicles 9000LB and below)
Anchor bolts/mounting hardware included
Tool trays and toe guards included- Warranty is 1 year on parts and 5 years on the structure.
-Transport service and delivery available across Canada
See my other ads !!!!!!
For more information contact us Tel:1-800-361-4095Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
24
1R 22.5 truck Tires all around 20 percent left on tread price $ 100 call there going fast 506 461 3657
-
25
kiene diesel indictor
-
26
"Unlock the Potential: Elite Excavation Services Tailored for Builders and Investors
Elevate Your Projects with:
Precision Landscaping
Foundation Excavation Excellence
Driveway Prowess
Seamless Land Clearing
We Speak Your Language. We Deliver Your Vision."]
-
27
Tracteur très polyvalent. L3600 GST On peu faire du gros travail , comme du petit bricolage. Très maniable.
36 forces moteur, 31 forces prise de forces, 4 cylindres.
Avec levier de vitesse et un embrayage. Les vitesses ce passent sans embrayé. GST. Inverseur aussi sans embrayage. Grande gamme de vitesse. La plus lente je crois est à moins de 1.5 km/h.
Le chargeur est Quik-attache.
Moins de 2000 heures. Le compteur n'a jamais été en panne ou changé. Je garantis les heures.
Je l''utilise très souvent mais peu de temps je travaille sur une fermette , comme je ne vais jamais sur la route jamais Plaqué.
Je l'ai acheté au début des années 2000, il était presque neuf moins de 50 h. Donc c'est moi qui ai toujours travaillé avec depuis.
Il y a quelques années j'ai fais du bûchage pendant 4 à 5 mois. Ce qui explique la cabine un peu magané.
Les pneus arrière sont d'origine, la mécanique est comme un neuf.
C'est dans la catégorie tracteur de ferme donc très fort au niveau du chargeur et du relevage hydraulique .
Vu que je ne vais pas sur la route je ne l'ai jamais immatricule
Aussi prise de force ventrale.
Prix= 25000$
-
28
CHARIOT élévateur HYSTER 50 éclectique AC DRIVE 5000 lb capacité 15 'élévation peinture refaite roue a traction 2640 heures seulement vient avec chargeur (130amp/575 volts et (30amp. sur 110 volt fournie avec
-
29
Fourche a palette 48po. 4000lbs
Attache Alo /Skid Steer John Deere
David 8️⃣1️⃣9️⃣ 3️⃣5️⃣0️⃣ 5️⃣5️⃣4️⃣3️⃣
-
30
Winch forestier Norse 490
164pieds de câble (7/16)
capacité de 4.9tons (11 020 lbs)
8️⃣1️⃣9️⃣⭕️3️⃣5️⃣0️⃣⭕️5️⃣5️⃣4️⃣3️⃣
Autre model disponibles Norse 250 350 450 55A
-
31
Chargeuse a bois 11pi de Mat pour vtt ou petit tracteur ,possibilité de l'avoir sans l'unité hydrauliques , unité hydraulique avec moteur lifan 6.5hp ,tandem ajustable, grappin 28po,patte extensible Promotion pour le Mois de février prix habituel 9995$
Pour plus d'info 8️⃣1️⃣9️⃣⭕️3️⃣5️⃣0️⃣⭕️5️⃣5️⃣4️⃣3️⃣
-
32
Chipper a branche
Moteur Kohler 14hp
Prend jusqu'à 4po.
Arrêt d'urgence
rotation de la chute 360 degrés,clapet ajustable
Possibilité d'avoir des Spacer pour les roues
Attelage 2"
2600$ non assemblé
2700$ assemblée prêt à marché
8️⃣1️⃣9️⃣⭕️3️⃣5️⃣0️⃣⭕️5️⃣5️⃣4️⃣3️⃣
-
33
Remorque 7x14 essieux 8000lbs châssis renforcé capacité de charge 11800lbs
Chargeuse 1150M16 16pi de mat grappin 36po,unité hydraulique 9HP Moteur Honda gx270
Prix sur demande
Pour plus d'info 8️⃣1️⃣9️⃣⭕️3️⃣5️⃣0️⃣⭕️5️⃣5️⃣4️⃣3️⃣
-
34
4x8 heavy duty pour tracteur de 20 a 50hp capacité de 3tonnes panneau a barrure automatique peinture uréthane cylindre double action main pivotante
Autre grandeur disponible 5x10-6x10-6x12-7x12
Pour plus d'info 819-350-5543
-
35
9500 lbs à 58 pieds mt1058 à louer 1200 semaine ou 4000 mois.....possibilité de louer avec chauffeur .....construction industriel ou résidentiel
Daniel
514 688 9201
-
36
Moulin a scie 26 po. et 31po. d'ouverture disponible
Avec guide lame, valve a l'eau automatique ,arrêt d'urgence
Moteur 9.5hp Kohler ou moteur 14hp avec démarreur électrique
plusieurs longueur disponibles
Rallonge de 6'6"
Possibilité de remorque
⁉️A partir de 4300$⁉️
Pour plus d'info 8️⃣1️⃣9️⃣ 3️⃣5️⃣0️⃣ 5️⃣5️⃣4️⃣3️⃣
-
37
2009 John Deere 1790 planter for sale.
Second owner since new, owned since 2010. 12/23 split row 15”/30”. Precision planting Eset meters with corn, soybean and canola discs. Hydraulic drive meter with clutch for shutting off half of planter. Liquid kit for all 23 rows with green star rate controller and hydraulic drive fertilizer pump, requires 5 scv’s to run planter with fertilizer pump, could be switched to ground drive to eliminate 1 scv. Foot switch in cab to turn on liquid, 300 gallon liquid tank. RK products closing wheel bearing upgrade and gauge wheel scrapers on front 12 rows. Drag chains on all rows.
-
38
Farm King 9600,8ft.double auger,new chain,updated 3pt.bracket,new gear box oil, Asking 4700.00 Can. obo. Message me at (204) 825-8463 or call (204)535-2065 Located near Baldur Mb.
-
39
1985 Arnes End Dump Project Trailer, 32ft Long, Passenger side front Damage, Tridem axle
-
40
** Great Unit with Immaculate Vanbody with Fresh Safety ** READY TO WORK**
GVWR 14,968 KG 26' X 8' Vanbody with Barn Doors
Hyd. Brakes, Single Axle with Dual Rear Wheels, Dual Tanks, AC, Cruise & Tilt - Daycab seats 3.
MDP # 5512
-
41
Brand new soil screener model #rsv70g
68” x 48” screen
-
42
Used k24 intake and throttle body.
Came off a 2011 crv. Part number shown in picture.
Asking for 75$ obo
Located near Windermere fcfs
Sold as is
-
43
Stainless Steel Meter Housing and Parts for John Deere Air Carts.
Luma Manufacturing builds and sells stainless steel meter housings for John Deere 1910 Air Carts and Morris 6000/7000 Series Air Carts.
Our custom stainless steel meter housings are built to last and can withstand years more of wear than the standard steel material. Our meter housings are built as one solid unit, using only stainless steel and no composite materials. There is two access door panels that allow for easy maintenance and cleaning. Luma Manufacturing provides heavy-duty products that are tested and trusted by farmers across Canada and the United States.
We also offer a large selection of 100% stainless steel meter body parts; couplers, expansions, run covers, plates, brackets, hardware and more.
New Products! Stainless steel diffusers and splitters.
We offer custom bending and sell stainless steel tubes for air carts and strip tillers.New! Quick Couplers:
Can be used with any OEM.
1.5 inch x 4 tubes - CAD$500/set
2 inch x 4 tubes - CAD$500/set
2 inch x 6 tubes - CAD$650/set
2.5 inch x 4 tubes - CAD$500/set
2.5 inch x 6 tubes CAD$650/setTo view more stainless steel products, buying info, contact info, testimonials & more; visit lumamfg.com
We also sell a large selection of stainless steel parts for John Deere air drills and planters.Please call or email if you have any questions.
We Ship Anywhere in North America.The Benefits of Stainless Steel Meter Housings and Parts
-Durable high quality 304 stainless steel; stainless steel last longer and is resistant to corrosion.
-Easy to install and built to fit seamlessly with OEM parts.
-Pieces are cut and bent with precise technology to ensure consistent performance during its lifetime.
-Built to be replaced seamlessly with older steel part; allowing for a far more superior build material while offering at a competitive price compared to dealers.
-Stainless steel parts last much longer than the standard steel, it requires much less maintenance and servicing over time.
-Luma Manufacturing’s meters and parts have been tested and trusted for years by farmers.
-Can be compatible for Section Control and Section Command.
-Luma Manufacturing meters are the only ones on the market that are made completely of stainless steel.Website: Lumamfg.com
Email: Luma@xplornet.com
-
44
One owner since new 2011 8285R 5039hrs. Ivt transmission (40k), no def, front and rear duals set for 30” spacing. $15,000 in work done in fall 2023. Service guard inspection done at Enns brothers in November 2023. New air filters all around, fuel filters, engine oil and filter change. Changed front hub oils, reconditioned variable speed fan drive, reconditioned steering cylinders, replaced accumulators for ils. Comes with Quick attach 3 point hitch but does not come with a monitor or receiver. Has been a great tractor with very few issues, only reason for selling is we bought a newer one.
-
45
NEW/UNUSED Brandt BA48-16 Ag Blade
REDUCED PRICE $62,500 OBO
-First picture for attention
-16' X 48" w/hole pattern to add extensions up to 20'
-6 Way Tilt Functions
-Lift Height: 40"
-Tilt Angle: 14 Degrees
-Blade Angle: 30 Degrees
-Quick Coupler
-Easy-to-install frame mount utilizes existing tractor frame mount holes, eliminating the need for drilling or welding
-Reversible cutting edge
-Mushroom skid shoes
-Mitered blade ends
-Compatibility for JD: Single Reduction Rigid Axle: JD9370R, JD9420R, JD9470R Double Reduction Rigid Axle: JD9520R, JD9570R Double Reduction with Hydra-cushion suspension: JD9520R, JD9570R, JD9620RAsking $67,500 OBO
See promo video below: https://www.youtube.com/watch?app=desktop&v=KoAHzPIlX0k&ab_channel=BrandtGroupofCompanies
Located @ Melita, MB
Call/Text: 204//522//6305 or 204//264//0053
-
46
landini mythos 110. 4800 hrs. naturally aspirated in line 6. bucket and grapple. new hydraulic pump.
-
47
We sell Tire changers Balancers Hoist and other garage equipment and they are in stock and we ship Canada wide 1-800-361-4095 Grand Prix Import has been selling Quality Automotive Equipment since 1977 in the Canadian market . The MONDIAL AUTOMOTIVE EQUIPMENT, GP-9 is is one of the most affordable floor plate car lifts built with quality materials and good workmanship. The lift has a strong double "S" column design to support 9000 Lbs capacity. Its an asymmetric lift - Double cylinder, Steel pulleys and equalizing cable system. - Truck adapters are included. - motor / pump 3 hp - 220 volts. -
Combo (Symmetrical and Asymmetrical) Arm Assembly
Straight Front/Rear 3 Stage reach from 22 7/8" to 42 5/8"
Straight Rear 2 Stage reach from 33 5/8" to 52 7/8"
Screw-in pads 4 pieces included
Truck adapters 4 pieces included
Double point safety lock release
Automatic arm lock restraints
Relief valve built in power pump to prevent overloading
Door guards protection rubber
Up-limit switch to protect cylinders working stroke used in safe length scope
Heavy duty 3/8" diameter cable and 5" pulley that reduce high stress on synchronization process and increase cable life
Ultra high molecular self lubricating nylon slider that ensures carriage smooth moving up and down
Lifting operation by pressing "UP" button on motor
Manual lowering operation by pressing lever
Relief valve built in power pump to prevent overloading
Overall Height: 143 3/16"
Overall Width: 134 5/16"
Maximum Lift height with Truck Adapters: 81"
Maximum Lift height without Truck Adapters: 75"
Minimum Height of Arm Top: 4"
Carriage to Carriage Width (Drive through clearance): 100"
Column to Column Width: 109"
Column Cross Section: 11"L x 7"W
Driving Mode: Dual hydraulic cylinders, chain drive
Motor: 220V Single Phase 3HP 10A (recommend a 30A breaker)
Hydraulic Oil: 3-5 gallons AW32/AW46
Lifting Capacity: 9,000 LB
Time to full rise: 50 sec
Concrete Requirement: 5" thick at 3500 psi reinforced with fiberglass or steel (
Anchor bolts/mounting hardware included
Tool trays and toe guards included- Warranty is 1 year on parts and 5 years on the structure.
-Transport service and delivery available across Canada
See my other ads !!!!!!1 year warranty on parts and 5 years on structure.
For more information contact us Tel:1-800-361-4095
Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
48
Tire changer TC-325 TEL: 1-800-361-4095 **** Tire Machine MONDIAL TC-325 with bead blaster and internal air tank at combo with balancer Swing arm Tire changer • It allows to remove and install tires up to 24 "in wheel diameter • Plastic inserts are provided to protect the alloy wheels.
TC-325 Specifications
Rim clamping outside 10"-22"
Rim clamping inside 12"-24"
Motor: 2HP, 15 AMPS, 120V/60Hz
Maximum Tire Diameter 41"
Wheel width:3’’-15"
Operating pressure 115-145 psi- One year warranty on parts. We have all spare parts in stock. -Transport service and delivery available across Canada
-4 post parking lifts available Other garage equipment available.
For more information contact us Tel: 1-800-361-4095 Address 8275 17th Avenue MONTREAL, QC H1Z4J9
-
49
4 wheel drive tractor with cab - 85HP tractor - Configuration: Standard • Cab • Power Reverser • MFWD • Rear PTO: 540 • Tire Width: Mid • Loader: Yes • Loader Ready • MFWD (4 Wheel Drive) • Deluxe Cab with Air Suspension Seat • Vertical Exhaust • 32F/16R Power Reverser Plus Transmission - 540/540E • Electrohydraulic (EH) with remote LH fender control • Dual Rear Valve with Lever Controls • Dual Mid Valve with Joystick Control • 3-Point Hitch with Telescoping Draft Links • 420/85 R 34 R1W Radial (Michelin) • 13.6R24 125A8 R1W Radial (Michelin) • Front Weight Support - 187 Lbs. • Cold Weather Package -air conditioning / heat controls – radio
H563 Loader - loader has live 3rd function - quick attach bucket.
Not included but available for sale- MK Martin Single Auger – 97 inch – SB97 Snowblower with hydraulic shoot controls – 75 hp rating, quick attach Pallet forks, quick attach 3 spear bale, quick attach 72 inch grapple, 8 foot snow blade - message for details
-
50
They are in stock and we ship Canada wide, 1-800-361-4095 Grand Prix Import has been selling Quality Automotive Equipment since 1977 in the Canadian market .**Looking to upgrade your garage, increase your parking space and get work done on your car? The SUMMER SALE is on now.
We're excited to offer you our MP10SW double parking 4 post lifts with 10,000 lbs of lifting capacity - perfect for any garage.
Specs:
- 207.5" Wide - 188.6" Long - 77 space under the parking deck - 110V
5000 lb sliding Scissor Jack, capable of an additional 19 INCHES of lift and a set of ALUMINUM RAMPS available as an option
Our 4 post lifts come with the following:
- 110V power unir - Standard Diamond Plate steel with ramps, or optional Premium aluminum approach ramps - Completely enclosed carriages for safety, 3/16 non-skid diamond plate - Easy-operation lock handle located by power unit, minimizing any bending or squatting - Caster wheels, six steel drip trays, jack plate and mounting hardware included - 1 Year warranty on all parts; 5 Year on structure
National Shipping Available Can be picked up at the local terminal. Delivery fee's apply please contact us
For more information contact us Tel:1-800-361-4095