Cars & vehicles, Heavy equipment with in Canada.
-
1
Great working 100 foot boom truck, dt466 no rust was souther truck, never used in winter. 35,000.00 call or text 519-955-6871
-
2
2013 Mack 445 auto good condition 519 357 5534
-
3
600 litres used 15w40 oil in 205
litres plastic barrels. $4 per litre or best offer.
-
4
Wide Cut Mill for sale, cut up to 60”x20’, it has a 17.5hp briggs that I bought new for the build and has been strong since day one. Belt driven to a pulley and shaft.
This is truly portable and setup time has been under 3 minutes from the time the truck is unhitched!
Hand crank carriage feed and power up/ down makes it super easy on the body to slab up some huge trees.
Cad designed and stress tested before building.
Frame and carriage has been designed to hold over 9200 pounds and have had over 9600 pound oak on it recently.
$500 in chains come with it.
Extra supports and log dogs also come with the unit.
Delivery to nearby provinces available, any further and or states side is buyers responsibility but know of a few transport companies that can haul anywhere in North America that I can give you contact details.
Location: New Brunswick, Canada
Asking $10,500CadShow less
-
5
Champion 740 Grader with wing all works just put new batteries in also have manual any questions feel free to contact me
-
6
Been awhile since we have seen a trade this clean! 2022 CS2520. Comes with front blower, loader, box blade, and tire chains. Only has 22 hours on it! This will certainly not last long. Come on in to discuss, we would love to put something together for you. $24995 plus fees and tax.
Please contact Kennebecasis Land & Leisure @ (506) 847-2792 or joe.armstrong@krentals.ca
-
7
Western V Plow 7 1/2 ft ..wire harness / Remote / front mounting plate NOTE : possible trade for side by side
-
8
Tire machine car lift Parking lift Wheel balancer Auto Hoist Mondial GP9L 9000Lbs Car Lift They are in stock and we ship Canada wide 1-800-361-4095 Grand Prix Import has been selling Quality Automotive Equipment since 1977 in the Canadian market .
MONDIAL AUTOMOTIVE EQUIPMENT, GP-9L is is one of the most affordable floor plate car lifts built with quality materials and good workmanship. The lift has a strong double "S" column design to support 9000 Lbs capacity. Its an asymmetric lift - Double cylinder, Steel pulleys and equalizing cable system. - Truck adapters are included. - motor / pump 3 hp - 220 volts. - The height of the lift is 9'4 "-
Combo (Symmetrical and Asymmetrical) Arm Assembly
Straight Front/Rear 3 Stage reach from 22 7/8" to 42 5/8"
Straight Rear 2 Stage reach from 33 5/8" to 52 7/8"
Screw-in pads 4 pieces included
Truck adapters 4 pieces included
Double point safety lock release
Automatic arm lock restraints
Relief valve built in power pump to prevent overloading
Door guards protection rubber
Up-limit switch to protect cylinders working stroke used in safe length scope
Heavy duty 3/8" diameter cable and 5" pulley that reduce high stress on synchronization process and increase cable life
Upgraded Floor Plate, Beveled Diamond Plate Steel 5/32" with Supporting Bracket.
Ultra high molecular self lubricating nylon slider that ensures carriage smooth moving up and down
Lifting operation by pressing "UP" button on motor
Manual lowering operation by pressing lever
Relief valve built in power pump to prevent overloading
Overall Height: 113 5/8"
Overall Width: 134 5/16"
Maximum Lift height with Truck Adapters: 81"
Maximum Lift height without Truck Adapters: 75"
Minimum Height of Arm Top: 4"
Carriage to Carriage Width (Drive through clearance): 100"
Column to Column Width: 109"
Column Cross Section: 11"L x 7"W
Floor Plate Cross Section: 10 5/8"W x 1 7/8"H
Driving Mode: Dual hydraulic cylinders, chain drive
Motor: 220V Single Phase 3HP 10A (recommend a 30A breaker)
Hydraulic Oil: 3-5 gallons AW32/AW46
Lifting Capacity: 9,000 LB
Time to full rise: 50 sec
Concrete Requirement: 6" thick at 3500 psi reinforced with fiberglass or steel (4" thick for vehicles 9000LB and below)
Anchor bolts/mounting hardware included
Tool trays and toe guards included- Warranty is 1 year on parts and 5 years on the structure.
-Transport service and delivery available across Canada
See my other ads !!!!!!1 year warranty on parts and 5 years on structure.
For more information contact us Tel:1-800-361-4095
Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
9
2 furrow plough for sale
Great little plow
Could easily be reduced to a single furrow
-
10
Truck is in great shape, 450hp 18 speed. 16.5 foot box . 44000 rear ends 20000 front end. 556000 kms on it. Looking to sell but May be interested in John deer 450/550 or CAT d4 or d5 dozer with cab for trade. Will add money for the right machine. Asking 46000 or best reasonable offer. Call 506-467-7694
-
11
Heavy Truck Bumpers $350.00 each
-
12
New Holland 316 square baler and Ford Rake. The baler threw its time before I bought it. Bought as a parts baler but not farming anymore. Rake needs some new teeth and welding. Would be great projects or parts machines.
-
13
Tire machine changer car lift Parking lift Wheel balancer They are in stock and we ship Canada wide 1-800-361-4095 Grand Prix Import has been selling Quality Automotive Equipment since 1977 in the Canadian market . The MONDIAL AUTOMOTIVE EQUIPMENT, GP-9 is is one of the most affordable floor plate car lifts built with quality materials and good workmanship. The lift has a strong double "S" column design to support 9000 Lbs capacity. Its an asymmetric lift - Double cylinder, Steel pulleys and equalizing cable system. - Truck adapters are included. - motor / pump 3 hp - 220 volts. -
Combo (Symmetrical and Asymmetrical) Arm Assembly
Straight Front/Rear 3 Stage reach from 22 7/8" to 42 5/8"
Straight Rear 2 Stage reach from 33 5/8" to 52 7/8"
Screw-in pads 4 pieces included
Truck adapters 4 pieces included
Double point safety lock release
Automatic arm lock restraints
Relief valve built in power pump to prevent overloading
Door guards protection rubber
Up-limit switch to protect cylinders working stroke used in safe length scope
Heavy duty 3/8" diameter cable and 5" pulley that reduce high stress on synchronization process and increase cable life
Ultra high molecular self lubricating nylon slider that ensures carriage smooth moving up and down
Lifting operation by pressing "UP" button on motor
Manual lowering operation by pressing lever
Relief valve built in power pump to prevent overloading
Overall Height: 143 3/16"
Overall Width: 134 5/16"
Maximum Lift height with Truck Adapters: 81"
Maximum Lift height without Truck Adapters: 75"
Minimum Height of Arm Top: 4"
Carriage to Carriage Width (Drive through clearance): 100"
Column to Column Width: 109"
Column Cross Section: 11"L x 7"W
Driving Mode: Dual hydraulic cylinders, chain drive
Motor: 220V Single Phase 3HP 10A (recommend a 30A breaker)
Hydraulic Oil: 3-5 gallons AW32/AW46
Lifting Capacity: 9,000 LB
Time to full rise: 50 sec
Concrete Requirement: 5" thick at 3500 psi reinforced with fiberglass or steel (
Anchor bolts/mounting hardware included
Tool trays and toe guards included- Warranty is 1 year on parts and 5 years on the structure.
-Transport service and delivery available across Canada
See my other ads !!!!!!1 year warranty on parts and 5 years on structure.
For more information contact us Tel:1-800-361-4095
Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
14
Kenworth T880 2020, 186 306KM.
Automatique
Moteur Pacar MX-13 510HP
Transmission Allison
Suspension KW AG460
Full Garantie (grosse garantie)
12 Robber neuf
Panneau a neige inclus
Changement de carrière
Tu veux plus d’info 418 295-5882
Vous voulez savoir combien le terme par mois pour ce bijoux ?
Financement disponible
Appelez :
Caroline Bornais 418 831-2061 (poste 204
-
15
Kenworth 2012 moteur cummins t 440 isl 380 hp 18 vitesses avec possibilité de permis région 09 inspection fait février essieu relevable suspension kenworth moteur 13000 heures très bien chaussé
-
16
//FRANÇAIS
2023 Freightliner M2 106 comme neuf.Moteur: L9 350, transmission automatique.
Essieux: 16-23 full lock, ratio 5,38.
Pneus: 315/11R22,5.
Kilométrage: 14 170 km.
Garantie prolongée de 5 ans sur moteur et transmission.
Boîte Lanau de 13,5 pieds.
Inspection valide jusqu'en mars 2025.
Pour infos, écrivez-moi au 418-293-4565.//ENGLISH
2023 Freightliner M2 106 like new.Engine: L9 350, automatic transmission.
Axles: 16-23 full lock, 5.38 ratio.
Tires: 315/11R22.5.
Mileage: 14,170 km (8800 miles).
5-year extended warranty on engine and transmission.
13.5 foot Lanau box.
Inspection valid until March 2025.For more information (even in english), text me at 418-293-4565.
-
17
//FRANÇAIS
2013 Haulotte Compact 3368RT 4WD
Plateforme élévatrice, à l'état neuf.Seulement 219,3 heures au compteur depuis son acquisition en 2013, elle a très peu servi.
Cette machine n'a eu qu'un seul propriétaire et a toujours été entreposée à l'intérieur, garantissant ainsi son excellent état.
Pour obtenir davantage de renseignements, écrivez moi au 418-293-4565. Merci!
//ENGLISH
2013 Haulotte Compact 3368RT 4WD
Scissor Lift, in like-new condition.Only 219.3 hours of use since its purchase in 2013, making it lightly used.
This equipment has had only one owner and has always been stored indoors, ensuring its excellent condition.
For more information (even in English), please text me at 418-293-4565.
-
18
Camions peterbilt 388 2013
Moteur cummins 550 hp
Essieux avant 13000 lbs
Diff 391 super 40 full lock
Moteur refait a 680000 km
Pour plus d'information veuillez me contacter au 418-378-4424 par texto si pas de réponse
-
19
Tire changer TC-325 TEL: 1-800-361-4095 **** Tire Machine MONDIAL TC-325 with bead blaster and internal air tank at combo with balancer Swing arm Tire changer • It allows to remove and install tires up to 24 "in wheel diameter • Plastic inserts are provided to protect the alloy wheels.
- One year warranty on parts. We have all spare parts in stock. -Transport service and delivery available across Canada
-4 post parking lifts available Other garage equipment available.
For more information contact us Tel: 1-800-361-4095 Address 8275 17th Avenue MONTREAL, QC H1Z4J9
-
20
Auto Hoist Car Lift Tire machine changer Parking lift Wheel balancer They are in stock and we ship Canada wide, Grand Prix Import has been selling Quality Automotive Equipment since 1977 in the Canadian market .Tel: 1-800-361-4095 The MONDIAL MR-06 is a 6,000-lb. portable lift with a 52" lifting height(60" with truck adapters) that comes loaded with adjustable arm assemblies, a safety lock bar with multiple lock positions and a free set of truck adapters. This MR-06 is a mighty 6,000-lb. capable mid-rise scissor lift thats designed to fit nicely into narrower bays and wont take up your precious floor space. The mid-rise lift is absolutely perfect for detailing vehicles, wheel service, brake work, as well as an ideal lifting solution for DIY enthusiasts and hobbyists who enjoy taking care of cars in their home garage.
Lifting Capacity 6,000 lb
Power Unit 110V
Length 102"
Width 40"
Min Height 5.5"
Max Height 60" with truck adapters
Warranty is 1 year on parts and 5 years on the structure.
National Shipping Available Can be picked up at the local terminal, Delivery fee's apply please contact us for details .at 1-800-361-4095
See my other ads !!!!!!We have all spare parts in stock
1 year warranty on parts and 5 years on structure.
For more information contact us Tel:1-800-361-4095
Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
21
Tire changer car lift Parking lift Wheel balancer They are in stock and we ship Canada wide 1-800-361-4095 Grand Prix Import has been selling Quality Automotive Equipment since 1977 in the Canadian market .**Tire changer • It allows to dismantle and mount tires on steel and alloy wheels up to 21"in diameter • Plastic protectors are provided to for the alloy wheels.
- One year warranty on parts. We have all spare parts in stock. -Transport service and delivery available across Canada
-4 post parking lifts available Other garage equipment available.
-Transport service and delivery available across Canada
See my other ads !!!!!!
For more information contact us Tel:1-800-361-4095Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
22
We sell Tire changers Balancers Hoist and other garage equipment and they are in stock and we ship Canada wide 1-800-361-4095 Grand Prix Import has been selling Quality Automotive Equipment since 1977 in the Canadian market . The MONDIAL AUTOMOTIVE EQUIPMENT, GP-9 is is one of the most affordable floor plate car lifts built with quality materials and good workmanship. The lift has a strong double "S" column design to support 9000 Lbs capacity. Its an asymmetric lift - Double cylinder, Steel pulleys and equalizing cable system. - Truck adapters are included. - motor / pump 3 hp - 220 volts. -
Combo (Symmetrical and Asymmetrical) Arm Assembly
Straight Front/Rear 3 Stage reach from 22 7/8" to 42 5/8"
Straight Rear 2 Stage reach from 33 5/8" to 52 7/8"
Screw-in pads 4 pieces included
Truck adapters 4 pieces included
Double point safety lock release
Automatic arm lock restraints
Relief valve built in power pump to prevent overloading
Door guards protection rubber
Up-limit switch to protect cylinders working stroke used in safe length scope
Heavy duty 3/8" diameter cable and 5" pulley that reduce high stress on synchronization process and increase cable life
Ultra high molecular self lubricating nylon slider that ensures carriage smooth moving up and down
Lifting operation by pressing "UP" button on motor
Manual lowering operation by pressing lever
Relief valve built in power pump to prevent overloading
Overall Height: 143 3/16"
Overall Width: 134 5/16"
Maximum Lift height with Truck Adapters: 81"
Maximum Lift height without Truck Adapters: 75"
Minimum Height of Arm Top: 4"
Carriage to Carriage Width (Drive through clearance): 100"
Column to Column Width: 109"
Column Cross Section: 11"L x 7"W
Driving Mode: Dual hydraulic cylinders, chain drive
Motor: 220V Single Phase 3HP 10A (recommend a 30A breaker)
Hydraulic Oil: 3-5 gallons AW32/AW46
Lifting Capacity: 9,000 LB
Time to full rise: 50 sec
Concrete Requirement: 5" thick at 3500 psi reinforced with fiberglass or steel (
Anchor bolts/mounting hardware included
Tool trays and toe guards included- Warranty is 1 year on parts and 5 years on the structure.
-Transport service and delivery available across Canada
See my other ads !!!!!!1 year warranty on parts and 5 years on structure.
For more information contact us Tel:1-800-361-4095
Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
23
Tire changer Car Lift TEL: 1-800-361-4095 ****
Tire machine MONDIAL TC-200 combo with balancer. Swing arm Tire changer • It allows to dismantle and mount tires on steel and alloy wheels up to 21 "in diameter • Plastic protectors are provided to for the alloy wheels.- One year warranty on parts. We have all spare parts in stock. -Transport service and delivery available across Canada
-4 post parking lifts and Other garage equipment available.
For more information contact us Tel: 1800-361-4095
Address 8275 17th Avenue MONTREAL, QC H1Z4J9
-
24
New Holland Tractor burnt down. Front axle and diff is all still good. Wheel weights are still good. Rear axle is still good.
-
25
Tri axle
Ai ride
Centre roll
49 feet
Winches
Dunnage rack
Plumbed for booster
Wide load strobes
Good rubber
Call Kevin @780-926-6347
-
26
2001 aspen 48 foot oilfield float
Swing down dolly legs
Winches
Plumbed for booster
Centre roll
Air ride
Fresh cvip
Tri axle good rubber
Call Kevin @780-926-6347
-
27
TIME TO ORDER YOUR SNOW EQUIPMENT NOW!!!
With Delivery Times In Today's Market, Order Your Blades or Pushers Today to Get Them Before Winter.YOUR COMPLETE ATTACHMENT SPECIALISTS: BIGFOOT Enterprises - Spruce Grove, Ab.
Canadian Made Snow Blades & Pushers Available For Skid Steers , Tractors & Wheel Loaders
Various Models Available For All Types of Snow Clearing
For Any Skid Steer, 20 HP to 200 HP Tractors, Loader/Backhoes & Wheel LoadersWith All the different Models/Sizes Available, Call or Email us today
So We can Equip You With The Best Model & Size For Your ApplicationLocated Near Spruce Grove, Ab., If You are Unable To Pickup,
We Get Excellent Rates Across Western Canada and Can Easily Ship To You.CALL RANDY: 780-288-3668
Universal SkidSteer Mount Fits All The Current Skid Steers:
Bobcat, Case, CAT, John Deere, New Holland, Gehl, Mustang, Volvo, JCB, KubotaBIGFOOT Enterprises - YOUR COMPLETE ATTACHMENT SPECIALISTS
Located Near Spruce Grove, Ab.
http://www.bigfootenterprises.caAll Our NEW Attachments Are Built By Quality Canadian And U.S. Manufacturers And Covered By Full Manufacturer's Warranty
BIGFOOT Enterprises Has Been Specializing In Attachments, Nothing Else, For Skid Steer, Wheel Loader & Excavator Equipment Since 2006. With Over 20 Cdn & US Manufacturers, We Cover All Your Attachment Needs.
Call or Email Us Today.
-
28
Have a 2018 t-650, and a 2020 t-76, both units are fully loaded, high flow hydraulics, both units have next to no dirt work on them, both owner operated, tracks good on both and always maintained and in heated shop, these units are not beaten up like rentals . The t-650 has 2040hrs and the t-76 has 950hrs.
$72000 for the t-650 obo.
$92000 for the t-76 obo
Don't need help selling and serious buyers only please. Both machines are free and clear.
Only reason for selling is upgrading to different equipment.
1st unit to go and i keep the other one.
-
29
2019 D6T
Owned since new have all work orders, just put new complete cat undercarriage on, freshly ice lugged and fully serviced ready for work, Deleted
7400Hrs780-547-5106
-
30
Young’s Agri-Service
47 King St.
Lloydminster, Alberta
780-872-5800
www.youngsagservice.ca
The top of the range trailed Chainless double bale feeder.
The Chainless trailed square and round bale feeders are self-loading, suitable for feeding out any bale, round or square, and it maximises feed use. Designed for medium to large operations. A Chainless trailed bale feeder minimises feed waste by feeding out into narrow windrows to make the feed more accessible to animals and all but eliminate damage from hoof trampling, manure spoilage, and animals laying down on the feed. More efficient use of power, savings on machinery investment and faster bale feeding all add up to impressive fuel economy – made possible by the hydraulic drive system at the heart of every Hustler Chainless trailed bale feeder.
Most of the savings are achieved by a reduction in the amount of bale which is wasted.
Feed wastage can be caused by various factors:
1) The bale is not teased apart enough making it harder for stock to eat.
2) Animals laying or trampling on fodder.
3) Unfinished bales inside ring feeders due to poor ground conditions, not allowing animals to reach the leftover bale.
4) Stock rejecting feed because of dirt, mud or other contaminants.
Savings can be made by feeding the right amount of the bale and retaining the rest for the next feed. By feeding over a larger area compare to a ring feeder, there is less competition between the animals.
Typical savings achieved by using a Hustler Chainless bale feeder are between 15-40%, depending on your existing feeding system (chain feeders typically save 10-35%).
-
31
60” diameter drum , hard surfaced feet, weight approximately 20,000 lbs
-
32
1991 Scona tandem lowboy 9ft wide long beaver tails low profile nice easy slip for loading lots of fresh work done with a fresh safety
New brakes
New drums
New slack adjusters
New air tank
New load leveling valve
New shocks
New wheel seals
New wheel bearings
Few new tires
Deck boards are in good shape
All crossmembers in good shape one replaced by fifth wheel
All welding on rear was done properly replaced cracked out piece with 5/8 thick steel and reinforced properly
Structurally sound
Lots of money spent on this so no lowballs I will keep it
-
33
Color: Grey Metallic
D-Shaped Tub style with 25 cubic yard capacity per trailer made with Hardox 450 material.
22.5 - 10 hole Aluminum Unimount Rims.
11R22.5 - Sailun S665 Load Range H Tires.
16-1/2" x 7" Drum Brakes
Air ride complete with dump valve.For more information, please call the sales team at Velocity Truck Centre in Lloydminster.
-
34
Cat c15 motor single turbo 18 speed transmission 13600lbs front and 44000 rear. Text or call for more info
5067795749
-
35
Farm King 3 blade finishing mower, 5ft. Rear discharge. New belts, blades are two years old; 2 spindles and pulleys have been replaced. Undercoated and garage stored. $1800.
-
36
2014 LS Tractor with front Loader and Blower. Good condition. Low Hours (1198). Personal use only. Dealer serviced. Works like a new one. Asking $32,500.
-
37
Tractor White 2-105
- Year 1983
- 354 CI Perkins engine
- 116 HP
- 18 forward 6 reverse gears
- 3 rear remotes
- PTO 540 / 1000
- 92 inch double auger snow blower
- 9 foot snow blade for the loader
- industrial loader bucket
- New PTO clutch this winter
- All filters and fluids just changed
- New batteryAsking $18,000
-
38
20 hp with 1129 hrs. Std trans. Low hrs since service. New lights and 3 spool valve. 2 new rear tires and rims to go with it. Std steering Single stage clutch. Tractor works very well.
Blower 2018 Frontier 64” that came off a tractor with 200 hrs on it.
-
39
-
we are located in Shelburne, Ontario and offer shipping across Canada.
-
https://www.farmerequipmentsales.com/store/c13/Snow_Blowers.html#/
-
SNOWBLOWERS for Sub-Compact & Compact tractors, Farm & Utility tractors.
BECO snow blowers are robustly built high performance snow blowers capable of throwing snow up to 40'. They features large 4 blade impellor fans and large augers. Models for most 15 - 70 HP tractors, each snow blower includes a set of removable flares that can adjust the width by 4".
-------------------------------------------------------------
all blowers are now painted a dark grey colour.
-------------------------------------------------------------
for more information or to place an order online please visit our website at: https://www.farmerequipmentsales.com/store/c13/Snow_Blowers.html#/
-------------------------------------------------------------
50 / 54" snow blower $3,600- SOLD OUT
60 / 64" snow blower $3,700- IN STOCK
72 / 76" snow blower $4,300- IN STOCK
84 / 88" snow blower $5,000- IN STOCK
--------------------------------------------------------
50 / 54" and 60 / 64" Snow Blower Specifications:
designed specifically for sub-compact and compact tractors.
Throws snow up to 35 feet
Quick hitch compatible
24" cutting height
20" impeller is 6" deep & fabricated from 6 gauge steel (13/64")
14" auger flightings fabricated from 1/4" thick steel
6 gauge steel end housings (13/64")
11 gauge main housing (1/8")
#60 chain driven auger
3/8" thick steel adjustable 1&5/8" x 14" skid shoes standard
3/8" thick replaceable cutter bar
oil filled gear box
adjustable chute deflector
8 & 1/2" diameter chute, sitting on polyethylene ring and retained by 5 ball bearings for easy operation.
shear bolt protected at PTO & chain drive
series 4 PTO shaft included
manual worm gear chute turner
50/ 54" Overall dimensions 39" deep x 54" wide x 60" high, weighs 440 lbs. including PTO shaft
60/ 64" Overall dimensions 39" deep x 64" wide x 60" high, weighs 480 lbs. including PTO shaft
1 year warranty
Hydraulic orbit motor chute turner kit available for $900 installed with hoses and couplers.
------------------------------------------------------
72 " - 88" Snow Blower Specifications:
Throws snow up to 40 feet
26" cutting height
24" impeller is 7" deep & fabricated from 1/4" steel
14" auger flightings fabricated from 1/4" thick steel
1/4" thick steel end housings & gussets
9 gauge main housing
#60 chain driven auger
7/16" thick steel adjustable HD skid shoes standard
oil filled gear box
5 position adjustable chute deflector
9 & 1/2" diameter chute, sitting on polyethylene ring and retained by 5 ball bearings for easy operation.
shear bolt protected at PTO & chain drive.
series 4 PTO shaft included.
manual worm gear chute turner.
72 / 76" weighs 620 lbs. including PTO shaft
84 / 88" weighs 665 lbs including PTO shaft
1 year warranty.
Hydraulic orbit motor chute turner kit available for $900 installed with hoses and couplers.
Hydraulic chute deflector kit available for $500 installed with hoses and couplers.
-
WE ARE LOACTED IN SHELBURNE, ONTARIO for local pick up.
-
-
Shipping available to many terminals across Canada for $200-500, see this link for terminal locations: https://www.farmerequipmentsales.com/flat-rate-shipping-depot-locations-by-province.html#/
local pick up is also available
-
http://www.FarmerEquipmentSales.com
-
FARMER EQUIPMENT SALES IS A FULLY LICENSED AND INSURED FAMILY OWNED AND OPERATED FARM EQUIPMENT DEALER. WE STAND BEHIND WHAT WE SELL and have AMAZING CUSTOMER SERVICE !
-
VISA / MASTER CARD / AMERICAN EXPRESS
-
40
2019 western star 650000km Dd16 600hp Heavy spec 110100km on New Complete engine replaced under warranty in Nov 2022 at dealer New turbo new mcm new clutch. tires are 80% 24.5s 2016 bws quad axle log trailer 5 bunks with 9ft wide bunks and 2021 rotobec loader 29ft boom. Trailer is sound and tires are 80% brakes/cams and bushing are tight Comes with close to a dozen spare wheels and 3 spare tires (2 new 1 used) and spare hyd. Hoses Asking 200000$ Ready to work Contact info Keith richardson 506-624-4333 Or keithrichardsonsc4@gmail.com Location miramichi nb Equipment is working daily
-
41
ford truck 1 ton whit dump work rael good no for the road 351 4speed askinn $2500
-
42
2000 international and 1996 volvo both trucks came from Ontario a few years back and have been parked since). If you want a deal on one or better deal for both .) will not hold
-
43
Bought the tractor this summer and the blower came with it, selling as we already have another one. Blower had a complete service and check over from the dealer before we bought it, blower is ready to go.
We do have tractors here to load it onto a trailer if you are from away.
$5500 obo.
-
44
Yanmar diesel out of Thermo King refrigerator runs great 1800 or best offer.
Modal tk486
-
45
600-9 Pneumatic forklift tires at England Tire
-
46
700-12 Forklift tires at England Tire
-
47
In stock used 8.25” X 22.5” used rims at England Tire 655 Industrial Road Cambridge starting at $40 each
-
48
Massey harris 22 row crop. Has international loader attached. Good running tractor. May need head gasket. Comes with side curtains. Rear tires are in good shape. One front tire is a car tire. Has 3 point hitch from a massey mustang which is locked out at the moment.
-
49
Part 9x-2299 door/compartment latch with typical cat key lock. Brand new in box
-
50
Aluminum ramp in good shape 26 inches wide 13 feet 9 inches long