Cars & vehicles, Other with in Canada.
-
1
Good condition $15
-
2
Place de parking large et sécuritaire dans ruelle proche cinéma Beaubien et Parc Molson. A quelques minutes de marche des métros Fabre et Beaubien.
-
3
parts number 449739-5030s .
International Turbo for Bus.
No core charge, Brand new, 1 Year Warranty.
Note
* This is a direct bolt on aftermarket turbo.
* You will get same performance as the original factory turbo with much better price.
* 1 year warranty on turbo charger.
* Please contact us for Part Number reference.parts number 449739-5030s .
International Turbo for Bus.
No core charge, Brand new, 1 Year Warranty.
Note
* This is a direct bolt on aftermarket turbo.
* You will get same performance as the original factory turbo with much better price.
* 1 year warranty on turbo charger.
* Please contact us for Part Number reference.JM Turbo Technology
709 S Palm Ave, Alhambra, Ca, 91803, USA
Phone: 1-416-321-8857
1-647-892-6658
1-626-308-2996Email: jmturbotechnologyinc_canada@hotmail.com
Business Hours:
9:00 a.m.- 05:00 p.m. (Mon-Fri.) EST
9:00 a.m. - 11:00 a.m. ( Saturday ) EST
-
4
26 tuiles de butyle pour insonorisation de voitures ou projet audio.Acheté une boite de 34 tuiles pour 134$ .
il me reste 26 tuiles pour 60$ ferme. ( revient à 2.30$ chacune). pas d'expédition ( top lourd). Chaque tuile pèse 250 Grammes....
Par téléphone seulement et pas de négociation.
Si vous voyez l'annonce ne me demander pas si c'est disponible ( votre temps est précieux et le mien aussi.
514-351-1012
-
5
Great condition w/ 2 keys included
NRG SRK-101MC Quick Lock NeochromeTags: steering wheel quick release momo vertex griproyal sparco nardi personal NRG OMP worksbell spoonsports hornbutton
-
6
STEELMAN 06600 ChassisEAR Détecteur de grincement et hochet électronique neuf
-
7
plusieurs pieces de carrosserie
Voir les photos
prix selon piece : fraction du prix d'origine
-
8
Quick release steering wheel Grip Royal Spade 330mm Perforated Leather
Used only on carshows, never used as daily.
Like brand new no single scratch or scuffs or tears.Wheel Diameter: 330mm / 13in
Depth: 50mm / 2in
Grip Circumference: 110mm / 4.3in
Frame Material: Aluminum
Spoke Finish: Black Anodize
Grip Material: Leather
Grip Finish: Perforated
Bolt Pattern: 6-Bolt 70mm PCD
Weight: 44.8oz / 2.8lbsTags: steering wheel quick release momo vertex griproyal sparco nardi personal NRG OMP
-
9
Somerled and prince of whales or Somerled and Montclair , close to Metro grocery, Cavendish Ndg
INDOOR or Outdoor , I’m open to both ....
Please send me your infoThanks Merci
Please see my other ads :) good day
-
10
Huile pour transmission automatique motorcraft
Mercon ||| prix de détail chez Ford 10.71$ le litre
Demande 5$ le litre ou
50$ la caisse de 12 litres
Reste 1 caisse
-
11
electric scooter Blutron S65 one plus 65km range Trotinnette c neuf like new grosse pile très puissant 230 lb monte cotes à pleine vitesse powerful 230 lbs rider goes up hills full speed
prix USD 900 (1200 CAD)
qualité comme segway xiaomi -- West island Brand new high quality electric scooter Boutron s65 one plus, motor 800w 65 km range 32 kmh speed superb acceleration and hill climbing, 230lb no problem going up hills very powerful. Bought new in may, 73km total use. Current price $800-1050
heavy duty build quality 37 lbs
Large deck weight limit 265lbs
Acheté flambant neuf en mai Brault Martineau garantie. Utilisé 5 fois. Raison de vente veux acheter vélo. Box, boîte manuel etc.
https://www.blutronpower.com/products/blutron-one-plus-s65
-
12
2 Main short main wings of a Challenger ultralight airplane for sale. Selling because of accident. .NOTE: right side main wing is good. Left side main wing has a twist..
-
13
Single Luxury mattress by Homeline. 74 inches long by 39 inches wide by 12 inches thick. Purchased at Sleepy George’s in Sep 2021. Made in Canada. Medium firm. Excellent condition. Original cost $500. Bed frame also available on separate listing for $300. Both items together for $500. Comes with mattress protector.
-
14
Used once …as new Paid 2200 plus tax
-
15
Brand new not in box. Never been used. Was tested does work. Asking 50 or make an offer located in Pembroke. Prefer e-transfer
Def need e-transfer to hold
-
16
2004 Northwing Apache with Rotax 503 DCDI B gearbox with 13 hours total. Ceramicized exhaust and Facet backup fuel pump. MGL avionics engine monitor. Needs a new windscreen. Currently fogged and stored for season
Will consider selling engine/trike separately.
Can add Northwing Quest 7000 14.5 wing if needed for additional $1000.
-
17
2 Thick Super Duty, Side Mirror Covers, Keep Mirrors Free from Ice, Snow, Frost, Super Quick, Easy, 12inchX12inch each.
-
18
Clean SUV , panoramic sunroof , great winter tires
-
19
HAVE 3 LIGHTS THEY 250WATTS 110VOLT ALSO HAVE 7 OR 8 NEW BULBS WHICH ARE AROUND 40 DOLLARS EACH I BELIEVE ALSO YOU SHOULD HAVE AT LEAST A 10 FOOT CEILING OR MORE FOR BEST LIGHTING I USED THIS IN MY SHOP UNTILL I MOVED HERE WOULDN,T SELL BUT MY CEILING TO LOW 5197291713 IN PEMBROKE. PS VERY GOOD ON HYDRO , ALL SO THESE INDUSTRAIL LIGHTS
-
20
Interior is set up for food truck, needs flooring, needs work to be up to code, 2 deep fryers, flat grill, sink
Price is noticeable
-
21
Black Magic Tool Kit (brand new) for professional detailers.
It includes the following items (stored in a handy carrying case): wheel brush, spoke brush, tire brush, dusting brush, vent brush, finishing tool, applicator pads and hand waxing system.
Asking $30
-
22
Please send a message for a free quote. Thank you :)
-
23
For Sale vintage 1950s Chevrolet chevy steering wheel horn centre button as pictured. $40 plus shipping or free local area delivery. Located in Kinistino
-
24
FOR SALE - FLOOR GUARD GARAGE MAT
7 feet 6 inches X 18 feet 6 inches. BRAND NEW
BOX HAS NEVER BEEN OPENED
FOR CAR, VAN OR SUV
WILLING TO SELL FOR $180.00
-
25
Selling a 4.2 L six cylinder Jeep engine, was running and driving in a 1981 cj7 jeep but pulled it out a put in a amc V8 instead. Complete carb to oil pan, $550.00
-
26
Straw from 2021
Approx 40 bales
For further information
Call or text 3069419579
-
27
Selling the differentials and springs from this frame for $1,250.00 each, 5.38 gear ratio, in very good shape. Might sell whole frame with differentials and springs for $4,000.00 frame is straight and has no rust holes. Comes with steering box & linkages. More pictures coming when I can find them.
-
28
Selling a M38A1, parts Jeep, we have the differentials, springs, good frame (no rust), body tub, complete dash with gauges, Fiberglass hood, grill, frame has gun mount still. Had a 289 from a 65 mustang in it and I still have that engine, was rebuilt 20 years ago but still runs (in another Jeep but would sell it for another $1,500.00, complete carb to starter, has header’s.
Might have other parts but will have to look. $1,800.00 + $1,500.00 for the ford engine
-
29
These seats are from a 73-87 blazer. Clothe and foam in very good condition. rear seat $200.00, Center console $175.00. Rear seat comes with the mounting brackets. Front seats sold
-
30
Selling three Center consoles, factory OEM $225.00 each
-
31
1998 18ft sled or quad trailer
6’5 wide
-
32
Selling several amc Jeep engines, transmissions, t cases, factory 4 barrel intake, make a reasonable offer, no low ball offers accepted
-
33
On possède plusieurs années d'expérience dans le domaine pour mieux vous servir
Vous manque de place ou vous n'avez pas la place pour votre belle voiture d'été ,skidoo ou moto.Nous avons le meilleur choix pour vous SNAP-TECH EQUIPMENT vous offre le lift de stationnement 4 poteaux avec spécification suivante;
Capacité 9,000 LB
Hauteur de levage en haut de la piste 72 "(6 ')
Liquidation Sous pistes 67 1/2 "(5 '7 1/2")
Hauteur des COLONNES 83 "(6 '11")
Largeur (sans moteur) 104 3/8 "(8 '8 3/8")
Largeur (avec moteur) 114 "(9 '6")
Longueur totale avec rampes d'accès 207 1/2 "(17 '3 1/2")
Longueur totale sans approche Rampes 175 1/2 "(14 '7 1/2")
Rampes d'accès 37 "(3 '1")
Piste Largeur 21 1/4 "(1 '9 1/4")
Longueur des pistes 165 1/2 "(13 '9 1/2")
Largeur entre les pistes 37 3/8 "
Largeur entre la piste Rails 31 3/4 "
La piste en dehors de la piste extérieur 74 3/4 "(6 '2 1/4")
Dégagement entre les COLONNES 94 1/2 "(7 '10 1/2")
Longueur entre les COLONNES 157 1/2 "(13 '1 1/2")
Moteur 110V 3hp
Exigence d'huile 3 gallons Aw32
Garantie de 1 an sur les pièces et 5 ans sur la structure.
4 cover huile en plastic inclus
1 plateforme pour jack inclus
2 stop roue inclus
Instalation et livraison disponible
Nous avons toutes les pièces de rechange en STOCK et de techniciens disponibles pour réparer les machines.
Beaucoup des equipement disponible pour INSTALLÉ ton garage ( machine a pneu,parkinglift, machine a balancer,etc..)
Meilleur Qualite avec le meilleur service apres vente
Plus d'information appelle 514-794-2626
!!!!!!! L'innovation a votre service!!!!!!!!!
Adresse
Snap-Tech Equipment
305 rang st charles
Saint roch de l'achigan,Qc
J0K3H0
Tel : 514-794-2626
-
34
moteur de chrysler 383 hp avec transmission annee 1965
-
35
Pour projet
-
36
Skidozer sv302 avec moteur 5.3 injection 2005 attelage de gratte 8 position. Plus de 20mille investi dans la machine.
Contacter Maxime bouchard
418 550 5844
-
37
Si vous cherchez une endroit extérieur pour entreposer votre ROULOTTE , VR, REMORQUE ou BATEAU , 200 $ j ai aussi un garage a louer pour entreposer motos ou motoneiges ? contactez moi à Jonquiere !!!!
-
38
I have 2 2018 txt lithium golf carts fully refurbished with new paint ...lights...windshields...mirrors tires and wheels. First one is 7500...Lifted with undergrowth lights 8500...OBO.....CALL Ted at 306 537 3915 for more info...delivery available
-
39
Electric scooter in great working condition. 2 new batteries.
Call 306 728 8077 for more information or to come see. Offers considered.
-
40
MONDIAL GP-10 Car Lift They are in stock and we ship Canada wide, 1-800-361-4095 Grand Prix Import has been selling Quality Automotive Equipment since 1977 in the Canadian market .GP-10 is one of the most affordable floor plate car lifts built with quality materials and good workmanship. The lift has a strong double "S" column design to support 10000 Lbs capacity. Its an asymmetric lift with a Double cylinder, Steel pulleys and equalizing cable system. motor / pump 3 hp - 220 volts.
Combo (Symmetrical and Asymmetrical) Arm Assembly
Straight Front/Rear 3 Stage reach from 22 7/8" to 42 5/8"
Straight Rear 2 Stage reach from 33 5/8" to 52 7/8"
Screw-in pads 4 pieces included
Truck adapters 4 pieces included
Double point safety lock release
Automatic arm lock restraints
Relief valve built in power pump to prevent overloading
Door guards protection rubber
Up-limit switch to protect cylinders working stroke used in safe length scope
Heavy duty 3/8" diameter cable and 5" pulley that reduce high stress on synchronization process and increase cable life
Ultra high molecular self lubricating nylon slider that ensures carriage smooth moving up and down
Lifting operation by pressing "UP" button on motor
Manual lowering operation by pressing lever
Relief valve built in power pump to prevent overloading
Overall Height: 143 3/16"
Overall Width: 134 5/16"
Maximum Lift height with Truck Adapters: 81"
Maximum Lift height without Truck Adapters: 75"
Minimum Height of Arm Top: 4"
Carriage to Carriage Width (Drive through clearance): 100"
Column to Column Width: 109"
Column Cross Section: 11"L x 7"W
Driving Mode: Dual hydraulic cylinders, chain drive
Motor: 220V Single Phase 3HP 10A (recommend a 30A breaker)
Hydraulic Oil: 3-5 gallons AW32/AW46
Lifting Capacity: 10,000 LB
Time to full rise: 50 sec
Concrete Requirement: 5" thick at 3500 psi reinforced with fiberglass or steel (
Anchor bolts/mounting hardware included
Tool trays and toe guards included- Warranty is 1 year on parts and 5 years on the structure.
-Transport service and delivery available across Canada
See my other ads !!!!!!1 year warranty on parts and 5 years on structure.
For more information contact us Tel:1-800-361-4095
Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
41
6 foot truck box topper. It was originally off a GMC Sonoma but took it off. It is in good shape. The only con to it is the clear coat finish is starting to peel. It is 4 foot wide by 6 foot long. Selling for $150 obo. Don't be shy to shoot me offers either.
-
42
Warning light. New in box.
-
43
Bought for my Ford Edge Sport then didn't need. The return window
closed and they wouldn't accept my return.
Brand New...2 boxes
Asking $75 for both.
Pick up in Balcarres or will meet in Fort
Quappelle...will arrange to meet in Regina certain days
-
44
Brand new. See pictures for specs. These are 3 phase, 15 HP. They have the trash/agitator on them so they will handle some solids. Located at Kelliher
-
45
Truck topper 8 feet , good shape call only
-
46
Sioux valve grinding machines . Complete with seat stones and arbours. $1500.00 obo each
-
47
4x8 Steel Utility Wagon
Weight Capacity is approx. 2200lb with Wagon
Treated Plywood on deckGreat in-behind Quads, Side by Sides or Garden Tractors
Price - $1,000.00 (with plywood decking) one left
Price - $900.00 (without plywood decking) one leftCall - 306-536-5742
-
48
The TMK Tree Shear cuts trees and brush quickly and safely in one cutting and grappling motion.
The Shear can be mounted on excavators, skid steers, and other equipment.
It comes in 4 sizes to suit your machine (1 – 30 tons), working environment, and budget.Applications:
Remove trees safely with no ground disturbance and no high-speed spinning discs.
Reduce chainsaw work.
Firewood operations.
Cut and remove trees from sensitive areas like near buildings or other infrastructure where falling a tree is too risky.
Forest thinning operations increasing growth of desirable trees.
Reducing fuel for forest fire protection.
Removal of invasive woody species without chemical or burning.
Use on tracked machines for sensitive areas.
Cut and pile for burning.
Cut and pile for skidding and loading operations.
Harvesting sawlogs, it does not crack the stem.See the shears in action https://www.youtube.com/watch?v=RvB1Bw6kSZk
https://www.swiftfoxindustries.ca/tmktreeshearsThey are designed and built in Finland upholding traditional Finnish values of world class quality.
The shears are hand built to the highest standards and include Swedish Hardox 500 steel for the cutting blade.
Several options are available for each shear and it is easy to retrofit at any time including a collector for cutting and holding multiple stems, a delimber, extension beams for extra reach, and more.The Shear was designed and built by an operator and it shows in the durability, ease of serviceability, and simple operation.
Swift Fox Industries is pleased to work with TMK Tree Shear offering sales and service throughout Canada.Delivery available across Canada
Many quality skid steer, excavator and tractor attachments in stock and available
Please call, text, or email for more information
Office:780-853-3699
Kevin cell:780-674-1568
Linda cell: 780-779-7958
Email:kevin@swiftfoxindustries.cahttps://www.swiftfoxindustries.ca/
Swift Fox Industries main yard is in Vermilion Alberta and the secondary yard is at Mayerthorpe Alberta. We proudly serve Canada with top quality attachments.Skid Steer, compact track loader, excavator, tractor, telehandler, Bobcat, John Deere, JCB, Case, Caterpillar, Kubota, Kobelco, New Holland, Gehl, Hitachi, ASV, Mustang, bucket, forks, grapple, auger, blade, trencher, power rake, tiller, pallet forks, box rotator, brush cutter, rough cut mower, TMK tree shear, feller buncher, mulcher, firewood, grading, excavating, landscaping, soil screening, dirt moving, dirt screening, logging, thinning, forestry, fire smart, oilfield, renewable energy, farming, pasture, range management, environmental, demolition, construction, gold mining, fencing, snow removal, snow bucket, snow blade, snowblower, screw pile, residential, commercial, government, Rotastar, Wallenstein, Blue Diamond, CID, Baumalight, Martatch, Stout, Ez Spot Ur, Skid Pro, Denis Cimaf, Pengo, AMI, Engcon, Promac, Top Dog, Paladin, Digga, Wifo, FAE, Skid Lift, Quick attach, Ditch Witch, Vermeer, Fecon, Vermilion, Lloydminster, Mayerthorpe, Edmonton, Calgary, Grande Prairie, Slave Lake, Whitehorse, Yellowknife, Bonnyville, Wainwright, Vegreville, Fort McMurray, Cold Lake, Saskatoon, Regina, Prince George, Prince Albert, Brandon, Niagra, Toronto, Kelowna, Vancouver, Fort St. John, Dawson Creek, Winnipeg, Montreal, Alberta, B.C., Saskatchewan, Manitoba, Ontario, Quebec, Nova Scotia, PEI, New Brunswick, Yukon, Northwest Territories, Canada.
-
49
The TMK Tree Shear cuts trees and brush quickly and safely in one cutting and grappling motion.
The Shear can be mounted on excavators, skid steers, and other equipment.
It comes in 4 sizes to suit your machine (1 – 30 tons), working environment, and budget.Applications:
Remove trees safely with no ground disturbance and no high-speed spinning discs.
Reduce chainsaw work.
Firewood operations.
Cut and remove trees from sensitive areas like near buildings or other infrastructure where falling a tree is too risky.
Forest thinning operations increasing growth of desirable trees.
Reducing fuel for forest fire protection.
Removal of invasive woody species without chemical or burning.
Use on tracked machines for sensitive areas.
Cut and pile for burning.
Cut and pile for skidding and loading operations.
Harvesting sawlogs, it does not crack the stem.See the shears in action https://www.youtube.com/watch?v=RvB1Bw6kSZk
https://www.swiftfoxindustries.ca/tmktreeshearsThey are designed and built in Finland upholding traditional Finnish values of world class quality.
The shears are hand built to the highest standards and include Swedish Hardox 500 steel for the cutting blade.
Several options are available for each shear and it is easy to retrofit at any time including a collector for cutting and holding multiple stems, a delimber, extension beams for extra reach, and more.The Shear was designed and built by an operator and it shows in the durability, ease of serviceability, and simple operation.
Swift Fox Industries is pleased to work with TMK Tree Shear offering sales and service throughout Canada.Delivery available across Canada
Many quality skid steer, excavator and tractor attachments in stock and available
Please call, text, or email for more information
Office:780-853-3699
Kevin cell:780-674-1568
Linda cell: 780-779-7958
Email:kevin@swiftfoxindustries.cahttps://www.swiftfoxindustries.ca/
Swift Fox Industries main yard is in Vermilion Alberta and the secondary yard is at Mayerthorpe Alberta. We proudly serve Canada with top quality attachments.Skid Steer, compact track loader, excavator, tractor, telehandler, Bobcat, John Deere, JCB, Case, Caterpillar, Kubota, Kobelco, New Holland, Gehl, Hitachi, ASV, Mustang, bucket, forks, grapple, auger, blade, trencher, power rake, tiller, pallet forks, box rotator, brush cutter, rough cut mower, TMK tree shear, feller buncher, mulcher, firewood, grading, excavating, landscaping, soil screening, dirt moving, dirt screening, logging, thinning, forestry, fire smart, oilfield, renewable energy, farming, pasture, range management, environmental, demolition, construction, gold mining, fencing, snow removal, snow bucket, snow blade, snowblower, screw pile, residential, commercial, government, Rotastar, Wallenstein, Blue Diamond, CID, Baumalight, Martatch, Stout, Ez Spot Ur, Skid Pro, Denis Cimaf, Pengo, AMI, Engcon, Promac, Top Dog, Paladin, Digga, Wifo, FAE, Skid Lift, Quick attach, Ditch Witch, Vermeer, Fecon, Vermilion, Lloydminster, Mayerthorpe, Edmonton, Calgary, Grande Prairie, Slave Lake, Whitehorse, Yellowknife, Bonnyville, Wainwright, Vegreville, Fort McMurray, Cold Lake, Saskatoon, Regina, Prince George, Prince Albert, Brandon, Niagra, Toronto, Kelowna, Vancouver, Fort St. John, Dawson Creek, Winnipeg, Montreal, Alberta, B.C., Saskatchewan, Manitoba, Ontario, Quebec, Nova Scotia, PEI, New Brunswick, Yukon, Northwest Territories, Canada.
-
50
Missing key make me an offer