Cars & vehicles with in Canada.
-
1
2012 Honda Goldwing GL 1800.
49000 kilometres.
$14,000.00 OBO. (Safetied).
-
2
The KTM 890 DUKE redefines the word 'sharp' by adding an extra edge. Powered by an 889 cc parallel-twin nestled into one of the lightest and most compact chassis around, the KTM 890 DUKE boasts the agility you'd expect from a 600 cc, but with the ?meaty punch of a bigger twin. It doesn't rewrite the mid-sized naked bike rule book. It obliterates it.
MSRP: $12,399
Freight: $545
Total: $12,944+ tax & Lisc. *
HUDSON'S PRICE: $11,944 + tax & lisc
Financing Available oac
*Financed sales are subject to applicable fees
-
3
I have a front fender off a 2016 Ultra limited .It is mysterious red and sunglow red with a couple of marks. I bought it to replace my 2009 road king fender but it will not fit without work to it ! .So instead of possibly damaging it I would rather just look for one that will fit .
-
4
Hello, I’m selling my 2020 Honda rebel 300, this motorcycle was my first bike, I am the second owner, I bought the bike with 1000 km on it and now it has only 15,000(it will slightly go up until I sell it from riding). I bought it with the original stock exhaust. But now it has a slip on Amazon exhaust. I will sell it with the stock exhaust. I’ve also added new grips. And passenger seat with foot pegs.
It’s been extremely babied, it’s been stored in heated garage through the winter, oil change every 8,000k with the proper original Honda oil and filters, cleaned/lubed the chain every 100k, cleaned and waxed the bike every time it got dirty. if you have any questions about the bike, don’t hesitate to ask me. Serious inquires only. Please don’t waste my time.
-
5
Vend ma motoneige a cause de problème de santé.
Selling my snowmobile due to health issues
-
6
VTT Honda 250 fonctionne très bien j’ai les papiers il est enregistré a mon nom je suis de Saint-Bruno de Guigues
-
7
POLARIS XPLORER 400L 4X4
TRES TRES PROPRE
PARFAITE CONDITION
PIECES CHANGÉ :
-MOTEUR REFAIT CETTE ÉTÉ
-STARTER
-TOUTES LES CHAINES ET SPROKETS
-BEARING ESSIEUX ARRIERE
-COURROIE
-COUVERT CLUTCH
-BEARINGS ET SEALS TRANSMISSION
-FREINS
-TOUTES LES HUILES ET GRAISSER
-BATTERIE
-
8
Runs like a top, 2 pulls to start, Well maintained always have oil in it, price is negotiable have any questions ask
-
9
Sled works excellent
-
10
2012 skidoo 600 ace mxz 4 stroke. 121 inch track, Daughter no longer interested. In good condition.
-
11
5800KM
Excellent condition
Brand new 2.5” track
Works a-1, just no time to use it
-
12
Slp pipe $400, front clutch $250 and rear clutch $150, Power commander 5 $250
-
13
well maintained, high windshield, dual carbides, studded 137 inch track, Brp scratchers,fresh oil change, licensed Trail pass
No trades
-
14
Works great
11000km
Track in decent shape
Pretty good on fuel cause its fuel injected
Got windshield mirrors and 2 up seat
Snow is here!!!
Located near florenceville nb
-
15
2016 Skidoo 800 mxz TNT
Great condition with 6200 miles.
Serviced yearly, 120" studded track, new battery, hand guards, heated hands & thumbs, scratchers.
-
16
400 Kodiak for parts, plastics in great shape, motor has no compression and tires are wore. Other then that in great shape.
-
17
Runs great and is in good shape other then the seat is rough. Ready to go needs nothing. It’s a 340 twin fan cooled. Speedometer works has 7000 miles. Has good skis. Good track. Has papers. Asking $900
-
18
2006 MacDon 2952i with 30ft 972 header. 1709/1312 hrs. In great shape
30ft split reel
2 Speed Trans
Call for more info and pricing. 306-307-0103
-
19
-2022 kubota svl 97-2 speed high flow
- positive shut off
-84 in ch bucket
- comfort cab , radio, back up camera
-remaining 2 year def warranty and 1 year or 1000hr drivetrain warranty
- 674.1 hours, fresh oil change and filters ,oil company ready,
- 99,999 motivated to sell , reason for selling is outa work, plus gst.
-call or text Craig @+1 (306) 462-9993
-can deliver
-
20
If you are looking to buy a truck such as a Kenworth W900 or Peterbilt 379 and need financing then we can help. We offer low monthly payments, 0 down options and can approve challenged credit too. We can also provide financing for engine repairs. Call today 780-665-4862
-
21
Highline bale pro CFR 650. $10,000 obo.
-
22
1688 combine. Low hours. Excellent shape. Redekop chopper, auger extension, hopper topper, harvest services concaves, specialty rotor. Farm trx yield monitor. Tons of maintenence done since ive owned it. Ready to hit the field. 30ft 1020 flex header and trailer included. 27500 obo.
-
23
YOUR COMPLETE ATTACHMENT SPECIALISTS: BIGFOOT Enterprises - Spruce Grove, Ab.
Canadian Made Heavy Duty Rock Bucket / Stone Forks Available For Skid Steers or Tractors.
Universal Skid Steer Mount & Hundreds of Tractor Mounts
Widths From 48" to 92"
1 1/4" Round Bar Shafts - 2 1/2" Spacing Between Tines
Tips Are 5/8" Thick Made From 400 Brinell Steel
23" High & 40" DeepCALL RANDY: 780-288-3668
Universal SkidSteer Mount Fits All The Current Skid Steers:
Bobcat, Case, CAT, John Deere, New Holland, Gehl, Mustang, Volvo, JCB, KubotaBIGFOOT Enterprises - YOUR COMPLETE ATTACHMENT SPECIALISTS
Spruce Grove, Ab.
http://www.bigfootenterprises.caAll Our NEW Attachments Are Built By Quality Canadian And U.S. Manufacturers And Covered By Full Manufacturer's Warranty
BIGFOOT Enterprises Has Been Specializing In Attachments, Nothing Else, For Skid Steer, Wheel Loader & Excavator Equipment Since 2006. With Over 20 Cdn & US Manufacturers, We Cover All Your Attachment Needs.
Call or Email Us Today.
-
24
Ktec scraper hitch for a 9430 9530 9630
John Deere tractors
Call for questions 3068306223
-
25
These are not heavy harrows
Very good condition.
44 feet operating width.
Minimum horsepower required: 145-150
Tires: Satisfactory
Ideal for seedbed preparation in a minimum till or conventional tillage situation.
Lots of spare parts included (bearings, seals, etc)
-
26
For sale by owner/operator. Was working in oilfield hauling crude oil. Fresh Saskatchewan Safety. Have all receipts of past work completed on truck. Truck was deleted and comes with recent complete engine inframe done by Mach 1 with a 1 year warranty. All new drives with steers at 50%. Also comes with a 5 " green bastard pump with manual by-pass and hoses, all re-certified. Truck ready for work. Engine hrs before inframe-30683. Engine hrs after inframe-30920. Total hrs=237. Engine km prior to inframe-1218378 km. After inframe-1229492 km. Total km=11, 114 km after inframe so very low km. Asking $165,000-With Pump or $155,000-Without Pump.
-
27
4400 versatile swather - $1500
357 New Holland mix mill - $500 (for parts)
Case pull type swather 25’ good shape - $1500
Sp 36’ New Holland straight cut header, HHC, pea auger, NH case adapter good shape, - $20,000
John Deere 750c dozer, needs a bit of work, - $30,000
Flexi coil harrows 70’ - $3500
-
28
Looking to sell my sled, I’ve been out on it twice since I bought it. It has 6,400 km’s on it and warranty until this Dec.
-
29
2022 CF Moto Z-Force 500. - 200 kms. Excellent condition
-
30
2021 Honda Rubicon 520
426 Kms
Equipped with:
a winch plus a click n go 2 snow blade installed 2022
also a two upseat installed 2022
$15,000 Firm
-
31
2022 Honda motoculteur honda fg110
motoculteur honda fg110. Pour plus d’informations, veuillez communiquer avec l’un de nos conseillers par téléphone, par courriel ou en remplissant le formulaire de demande d'information.
Essence
------------------------------
2022 Honda motoculteur honda fg110
Gasoline
-
32
2023 Honda generatrice honda eb5000x3c
Generatrice honda eb5000x3c. Pour plus d’informations, veuillez communiquer avec l’un de nos conseillers par téléphone, par courriel ou en remplissant le formulaire de demande d'information.
Essence
------------------------------
2023 Honda generatrice honda eb5000x3c
Gasoline
-
33
2024 Ski-Doo Renegade X 900 R turbo
Skidoo renegade X 900 R 2024 couleur noir disponible maintenant .
Financement disponible sur place
Essence, Nombre de passagers: 1
------------------------------
2024 Ski-Doo Renegade X 900 R turbo
Gasoline, Number of Passengers: 1
-
34
2023 Honda generatrice honda em6500s2c
Generatrice honda em6500s2c. Pour plus d’informations, veuillez communiquer avec l’un de nos conseillers par téléphone, par courriel ou en remplissant le formulaire de demande d'information.
Essence
------------------------------
2023 Honda generatrice honda em6500s2c
Gasoline
-
35
2024 Ski-Doo Skandic LE 900 ace 20 pouce
Skidoo Skandic 20 pouce 900 ace 2024
Financement disponible sur place
Essence, Nombre de passagers: 2
------------------------------
2024 Ski-Doo Skandic LE 900 ace 20 pouce
Gasoline, Number of Passengers: 2
-
36
2022 Honda motoculteur honda frc800
motoculteur honda frc800. Pour plus d’informations, veuillez communiquer avec l’un de nos conseillers par téléphone, par courriel ou en remplissant le formulaire de demande d'information.
Essence
------------------------------
2022 Honda motoculteur honda frc800
Gasoline
-
37
2024 Honda Pioneer 1000 M5DR
------------------------------
2024 Honda Pioneer 1000 M5DR
-
38
2023 Honda generatrice honda eb6500xkc
Generatrice honda eb6500xkc. Pour plus d’informations, veuillez communiquer avec l’un de nos conseillers par téléphone, par courriel ou en remplissant le formulaire de demande d'information.
Essence
------------------------------
2023 Honda generatrice honda eb6500xkc
Gasoline
-
39
2022 Honda motoculteur honda f220
motoculteur honda f220. Pour plus d’informations, veuillez communiquer avec l’un de nos conseillers par téléphone, par courriel ou en remplissant le formulaire de demande d'information.
Essence
------------------------------
2022 Honda motoculteur honda f220
Gasoline
-
40
2022 Honda tondeuse honda hrx217hyc
Tondeuse Honda hrx217hyc. Pour plus d’informations, veuillez communiquer avec l’un de nos conseillers par téléphone, par courriel ou en remplissant le formulaire de demande d'information.
Essence
------------------------------
2022 Honda tondeuse honda hrx217hyc
Gasoline
-
41
2018 Polaris assault 800,144x2 track. 2561 miles. Adjustable bar riser, tether cord, jaws rowdy can, c&a pro skis and B-PWR 36” a-arms.
-
42
Skandic SWT 154 inches track. Come with Heavy duty bumper front and back with jhook and winches and home made cargo box
-
43
2021 ARCTIC CAT ROIT X ALPHA RAIL FOR SALE
-
44
Yamaha 1998 srx 700.
-
45
For sale 2017 Skidoo MXZX 850 with upgraded XRS shock package as there was no XRS option that year. Also has upgraded front LED light option, and usb charging option. Full motor replacement in 2020 with new 850 short block, also upgraded to V-Force reeds. Also has red C&A PRO skis . Sled is in near mint shape, Always stored inside heated shed. Sled has 5100 miles on it. New motor has under 1800 miles . Asking 10800 obo
-
46
Articat bearcat xt
wide track
570 2 stroke
Reverse
2 up seat
Single owner bought new
Located in Alberta
Hunting fishing trapping trapline farm
-
47
EXCAVATOR
BRAND NEW 175 HYDRAULIC HORSEPOWER SHEET PILE DRIVER QUALITY BUILT IN THE NETHERLANDS FROM A COMPANY THAT HAS BEEN BUILDING ATTACHMENTS FOR 25 PLUS YEARS
360 DEGREE CONTINUOUS ROTATION - LOCKING SHEET PILE CLAMP SYSTEM TO SECURE FOR PICKING AND DRIVING PILES
AND FOR PULLING PILES OFFERING:
85 TONS OF ECCENTRIC FORCE
75 TONS OF VIBRATION FORCE
FREQUENCY OF 2800
HYDRAULIC PRESSURE - 320 BAR
HYDRAULIC FLOW 260 LPM
2 LARGE ECCENTRICS AND 12 VIBRATION ISOLATORS
175 HYDRAULIC HORSEPOWER SHEET PILE DRIVER AT THE HEAD POWERED BY EXCAVATOR AUXILARY HYDRAULIC CIRCUIT - NO REMOTE POWER PACKS REQUIRED
EXCAVATOR CLASS 45-65 TON
EXTENSION ARM WEIGHT 800 KG
COMES COMPLETE WITH ALL HOSES AND THE EXTENSION ARM
THIS IS SET UP BUSHED DOWN WITH 100 MM PINS - BUT SET UP TO TAKE 110 - 120 MM PINS
WE BOUGHT TO PUT ON OUR LONG REACH CUSTOM BUILT 1.3 MILLION PC450LC-8 TO TO REPLACE LARGE CRANES TO DRIVE 40-50-60 SHEET PILES IN TIGHT LOCATIONS
THIS MACHINE CAN DRIVE 40-50-60 FOOT SHEETS PILE REPLACES LARGE CRANE MOUNTED UNITS WITH POWERPAK HYDRAULIC UNITS AND REDUCES YOUR CREW FROM A 4 OR 5 MAN CREW TO 2 AND WILL DRIVE 4 TIMES AS MANY SHEETS PER HOUR PLUS READY TO DRIVE PILES 1/2 HOUR AFTER ARRIVING ON-SITE NOT A DAY LIKE CRANES AND WILL WORK IN TIGHT LOCATION AND SWAMP GROUND JUST USING WOOD PADS IF REQUIRED
MACHINE THEN CAN BE USED ON THE JOB FOR ALL EXCAVATOR WORK REQUIRED - THEN REMOVE THE SHEET PILES WHEN THE EXCAVATION IS DONE - NO SECOND MACHINE REQUIRED - THIS MACHINE WAS PUT TOGETHER FOR A LARGE JOB IN SWAMPY GROUND FOR BUILDING A BRIDGE WHERE THERE WERE 40 FOUNDATIONS THAT WERE 30 FEET WIDE X 50 LONG THAT AFTER DRVING THE SHEETS NEEDED TO BE EXCAVATED TO A DEPTH OF 20 FEET - BUT DUE TO COVID THAT JOB WAS PUT AND REMAINS ON HOLD.
THIS IS NOT A SPAGETTI BOOM LONG REACH - USE LARGE 12000 ft lb HYDRAULIC HAMMERS - 10,000 LB HYDRAULIC DEMOLITION PROCESSORS - GRAPPLES - HYDRAULIC DUAL DRUM GRINDERS - PLATE COMPACTORS - DIG WITH VARIOUS BUCKETS UP TO 4 YARDS ALL WITH ONE MACHINE
OR TAKE THIS SHEET PILE UNIT FOR $125,000.00 AND WE HAVE A PROFESSIONAL APPRAISAL ON IT FOR $220,000.00 - SINCE THAT APPRAISAL STEEL AND COST OF MANUFACTURING HAVE ALL INCREASED DRAMATICALLY
HAVE FACTORY INSTALLATION AND PARTS AND OPERATOR'S MANUAL
OR FOR SALE WITH THE KOMATSU LONG REACH FOR $500,000 - SEE MY OTHER ADS FOR THIS VERSATILE MACHINE READY TO WORK NOW WITH THIS SHEET PILE HEAD
FRANK 604-476-7777
FROM THE HYDRARAM WEBSITE:
Hydraram, we bring the muscle!
Hydraram has been producing attachments for use in demolition, recycling and green industry for over 25 years.
We supply a complete line of hydraulic attachments for excavators from 1 to 300 tons.
We specialize in all hydraulic attachments for all types of excavators.
The Hydraram products stand for quality, durability and productivity! Hydraram attachments are used around the world every day by many international companies in the the civil engineering sector, demolition, scrap processing, as well as recycling and forestry companies.
We sell our equipment through an extensive dealer network which provides perfect service. Because of this, we are able to help you choose the right attachment, and receive perfect after-sales support, maintenance and repairs.
With us you are at the right place for:
* New attachments
* Used attachments
* Rental (by HYDRARENT)
* Service & maintenance
* Repairs
* New & used partsWe always have the correct type of attachment. They are of high quality, durable, and always made to match your needs and requirements. Keeping attachments in stock helps us keep shipping times as short as possible.
NOTE: The Appraisal Shown in Image 6 does not take into account the cost of the New $150,000.00 Factory Komatsu Log Loader Boom c/w pins and cylinders or the cost of Importing the HydraRam Sheet Pile Driver from Europe or the $200,000.00 plus spent to complete the machine to its current finished state.
-
48
THIS BRAND NEW NEVER INSTALLED BUCKET DOES IT ALL WITHOUT CHANGING BUCKETS - MAKES A THUMB OBSOLETE AND WORKS THRU THE ENTIRE BUCKET ROTATION -SEE YOUTUBE VIDEOS:
https://youtube.com/watch?v=VYxdToqeleI
https://youtu.be/BV5EeyGm5OM
APPLICATIONS :
FORESTRY • PIPELINE • ROAD BUILDING • RIPRAP • MINING • DEMOLITION • MARINE/DREDGING
WASTE MANAGEMENT • SOIL REMEDIATION • SCREENING • TRUCK LOADING FOR ALL MATERIALSEXCAVATOR CLASSES FOR THIS 60 INCH XHAND WILL FIT ALL 200 / 250 / 300 - CURRENTLY SETUP WITH WBM LUGGING FOR 200-240 CLASS MACHINES
TAKE THIS $60,000.00 PLUS BUCKET FOR $30,000.00 AND HAVE WORKING NOW - NOT WAIT 4 MONTHS TO HAVE ONE BUILT
WE SHIP QUICKLY AND GET GREAT RATES
FRANK 604-476-7777 OR TOLL FREE 1- (833) 693-9323
ONLY REQUIRES 1 HAMMER OR HOEPACK HYDRAULIC CIRCUIT AND JOY STICK ELECTRIC CONTROL TO RUN AS CONTROLLEDS BY DAN FOSS VALVES.
DIGGING: Digging and clean-up capabilities in ONE attachment - SEE VIDEO
https://youtu.be/dkm0dxBI5BU
ROAD BUILDING -
https://youtu.be/DSooBNHheLs
DOZING Moving material forward and back, with double edge grading functionality - SEE VIDEO
https://youtu.be/5-girnvgBr0
SHOVEL LOADING Forward loading from the ground up for increased efficiency - SEE VIDEO
https://youtu.be/hifN_8J5n5M
GRABBING Full-width double-sided grabbing for maximum productivity - SEE VIDEO
https://youtu.be/95FmPIOywA4
SCREENING Filtering debris using both screening surfaces, saving time and money
https://youtu.be/a3-0p5oB5ko
PILING BRUSH - MOVING LOGS -
https://youtu.be/zQbNwrE5Y3c
EXCAVATOR CLASSES FOR THIS 60 INCH XHAND 200 / 250 / 300
SCREEN SIZE OPTIONS - 3″
After attending the Canada North Resources Expo held in Prince George on May 26th and 27th, 2017; XHand Inc. was featured as a noteworthy exhibitor at the event.
A highlight video was produced, speaking with XHand Inc. President, Dean Perrey.
Logging and Sawmilling JournalMay 2017 – Prince George
Also following the attendance at the Canada North Resources Expo, XHand Inc was featured by an article written and published in the Logging and Sawmilling Journal.
-
49
367
2023 peterbilt 367 Extended Cab with comercial highlift steel box. Plumbed for qurd and pup 84,000km 1900 hours. Truck is working everyday and will change. Cummins x15 565/2050 eaton 18spd 4.10 gear ratio and 46 diff. Extended warranty engine and after treatment, cooling system 5year/480k with towing packages. Arne Qurd wagon 2007 available also. Unit price $333000
-
50
26ft box
Aluminum tailgate 3500lb capacity
98’ clearance
Hydraulic Brakes