Cars & vehicles with in Canada.
-
1
RARE LOW HOUR 2019 22000 LB MINING SERIES LITTLE USED RIPPER FOR ROCK - SHALE - SANDSTONE WAS ON PC650 KOMATSU WORTH $300,000.00 PLUS NEW
IMAGE 3 SHOWS THE PRODUCTION COMPARISON BETWEEN A HR50 WHICH IS A TOY COMPARED TO MY HR82 MINING SERIES AND THE HR50 PRODUCTION IN TWO HOURS COMPARED TO A HYDRAULIC HAMMER VIDEO HERE (just copy and paste) :
https://www.youtube.com/watch?v=1EpaZbRGUag&t=4s
IMAGE 4 SHOWS WHAT SHEARORCE WANTS FOR A WELL USED HR52 - $158,000.00 WHICH AGAIN IS A TOY COMPARED TO THIS HR82 WHICH WEIGHS MORE THAN TWICE WHAT THE HR52 DOES
PERFECT FOR GOLD MINERS FOR THE TOUGHEST PERMAFROST ON SLOPES AND HILLS AND HOLES WHERE YOUR CRAWLERS CAN NOT ACCESS
BUILT JUNE - 2018 IN ITALY BY XCENTRIC RIPPER SERIAL # 18062501 - PUT IN SERVICE IN FALL 2019 - LITTLE USED DUE TO COVID
Note: The paint was touched up but those are the original factory decals on the ripper and the ripper had a re-enforcing plate welded into a known weak spot on both sides of the main ripper shank as preventative maintenance (never cracked as new shank).
The unit is ready to work - needs nothing.
CLEAR TITLE READY TO WORK NOW
SEE IMAGE 4 AND 5 FOR WHAT SHEARFORCE WANTS FOR A COUPLE OF USED HR42s AND HR 52'S - $158,000.00 ? - BOTH OF WHICH ARE WELL USED TOYS COMPARED TO THIS RIPPER
SEE THE PDF FILE INSTRUCTION MANUALS FOR ALL DETAILS - COPY AND PASTE:
https://www.shearforce.ca/wp-content/uploads/XR-MINING-SERIES-Instruction-Manual.pdf
https://bossattachments.com.au/wp-content/uploads/2020/05/boss-au-xcentric-ripper-xr.pdf
https://xcentricripper.com/wp-content/uploads/2019/05/FICHA-RIPPER-XR82_ENG.pdf
http://www.dbflimited.com/Resim/Upload/miningseriesripperenglish1.pdf
The XR82 key features as per Xcentric:
• Suitable for 70t-90t Excavators the XR82 weighs in at 10,000kg (WILL WORK ON 600 OR 650 CLASS WITH SHORT STICK HAS 120 MM MAIN PIN AND 110 MM SECONDARY ON WITH 22.25 INCHES BETWEEN THE EARS)
• 5 times higher production than conventional rock breakers
• A safe and easy alternative to drill and blast options
• New slim body design makes the XR Mining series perfect for trenching applications.
• Minimum noise levels
• Minimum maintenance
• No daily lubrication is required
• Minimum wear parts consumption
• Long-life components and materials
• Less fuel consumption per produced m3/ton
• Less emission per produced m3/ton
• Environmental protection (Bio Lubricants)
• Marine/underwater operation.
• Can be used on standard excavators.
• Increase operator comfort.
• HARDOX® & Strenx construction ensures long-lasting durability in extreme conditions.
• Designed and manufactured in Spain by Xcentric International, only the best materials are
used for excellent quality. Solid, durable, and characterized by the now recognizable clean lines
designed to resist wear and high stresses in the toughest working conditions.
• Extreme compactness and low center of gravity improves balance and drastically reduce the
strain on the excavator's arm, eliminating impact vibrations.Introducing the Xcentric Ripper® hydraulic ripper. A revolution in high-volume excavation and demolition.
After more than 10 years of development in the design and manufacture of the world's most productive, reliable, and technologically advanced hydraulic ripper, Xcentric International has taken the Xcentric Ripper range to a whole new level with the release of the all-new Xcentric Ripper Mining Series.
The Xcentric Ripper® outperforms traditional hydraulic hammers in nearly every type of material, particularly in medium hardness rock with natural fracturing and layers. Using patented Impact Vibration Accumulation Technology, the attachment works with the natural rigidity of the rock, and the vibrations that are produced shake the material to deepen cracks for easier breakup. It is an exceptional tool for frozen ground excavation, demolition, rock excavation, slag recycling, dredging, trenching, underground mining, and even underwater applications.
XR mining series range
• Easy operation with low noise.
• Unbelievable power and versatility.
• Easy on your machine’s pins and bushings.
• Low maintenance.
• Field replaceable ripper teeth.
• Patented impact vibration accumulation technology.
• A safe, easy, and environmentally friendly alternative to drilling and blasting options.One of our customers in the pile and dredging industry was searching for an excavation tool that could be deployed for a three-month project which included the removal of more than 40,000 yards of basalt from shoreline to make way for a new harbor and breakwater for incoming marine traffic.
The superintendent saw a video of the new Xcentric Ripper Mining Series working online and decided to give the new more powerful version of the hydraulic ripper a chance to prove it belonged in their arsenal of excavation tools.
“We have the XR82 model working on one machine and a clamshell bucket for dredging on the other,” he said. “We needed a tool that would work well underwater and the XR82 has performed to our expectations so far. I see it proving valuable as an asset in our equipment fleet and working really well on some of our more specialty projects.”
Mining Series Design Improvements
While the working technology is based on the standard series, the new Mining Series has been reinforced with a remodeled working platform, which delivers a much higher energy impact force to the work tool with a lower frequency. Larger and heavier eccentric gears are now machined from a single billet of steel and precisely designed to allow for equal weight distribution side-to-side and direct impact energy vertically.
The lower pivot arm and housing is reinforced to limit wear where the ripper typically encounters material, and the ripper arm or beak has been remodeled and reinforced with Hardox® steel. The XR Mining Series also has a narrower body profile, making it ideal for tunneling or operating in confined areas.
Designed to increase production, at lower operating costs, and reduced noise levels, the all-new XR Mining Series is a revolution for high-volume rock excavation. Like the regular series that came before it, the Mining Series will be an invaluable tool for frozen ground excavation, rock excavation, quarrying, surface and underground mining, oil sands excavation, utility project installations, pipeline trenching, demolition, slag recycling, dredging, and even underwater applications.
Visit the Xcentric Ripper page:
https://www.shearforce.ca/equipment/xcentric-ripper/ to learn more and watch video of the Xcentric Ripper® Mining Series in actionWATCH THE VIDEOS COPY AND PASTE:
https://youtu.be/C3LLh0fSjk4
https://youtu.be/Z_dNJYRlpyg
https://youtu.be/G3lSGXuxv9s.
NEW COST OVER $300,000.00 TAKE IT FOR $100,000.00 AND WE WILL SHIP QUICKLY = HAVE ON THE JOB NEXT WEEK
THIS UNIT WILL FIT THE FOLLOWING MACHINES WITH A HYDRAULIC PIN GRABBER COUPLER:
Case CX800
Caterpillar 365B L w/ VB Link
Caterpillar 365C w/ Reach Linkage
Caterpillar 375
Caterpillar 375 w/ Mass Linkage
Caterpillar 375 w/ Reach Linkage
Caterpillar 375CL
Caterpillar 385B
Caterpillar 385B
Caterpillar 385B LHitachi Zaxis 650LC-3 BE Arm
Hitachi Zaxis 650LC-3 H Arm
Hitachi Zaxis 670LCH-3 BE Arm
Hitachi Zaxis 670LCH-3 H Arm
Hitachi Zaxis 800 & BE
Hitachi Zaxis 850-3 BE Arm
Hitachi Zaxis 850-3 H Arm
Hitachi Zaxis 850LC-3
Hitachi Zaxis 850-LC-3 BE Arm
Hitachi Zaxis 850-LC-3 H Arm
Hitachi Zaxis 870H-3 BE Arm
Hitachi Zaxis 870H-3 H Arm
Hitachi Zaxis 870LCH-3 BE Arm
Hitachi Zaxis 870LCH-3 H Arm
Hitachi Zaxis 870LCR-3 BE Arm
Hitachi Zaxis 870LCR-3 H Arm
Hitachi Zaxis 870R-3 BE Arm
Hitachi Zaxis 870R-3 H ArmJohn Deere 600CLC & ME
John Deere 650DLC
John Deere 710G Std or Ext Stick
John Deere 710J Std or Ext Stick
John Deere 800 C & ME
John Deere 850D LCKobelco SK850LC
KOMATSU
PC600
PC600LC-6
PC600LC-7
PC600LC-8
PC600LC-8
PC650SE-3
PC650-6
PC750-6
PC750-6
PC750SE-6
PC800LC-7Link-Belt 800 QUANTUM
Link-Belt 8000 QUANTUM
Link-Belt 8000 QUANTUM MASSVolvo EC700B
Volvo EC700C
VOLVO EC800
-
2
COMPLETE SET OF MINT AS NEW LOW HOUR USEAGE ALL COMPLETE WITH AS NEW TEETH HENSLEY ADCO EXTREME DUTY AR 400 STEEL BUCKETS WORTH OVER $50,000.00 USD OR 68,000.00 CDN FROM OUR PC450LC-8 WHICH HAS LESS THAN 7300 HOURS ON IT AND WAS USED MAINLY FOR GRAPPLES AND DEMOLITION PROCESSORS
ALSO A NEW GEITH HYDRAULIC PIN GRABBER COUPLER C/W NEW PINS FITS KOMATSU PC400-PC490 DOOSAN 340 - DAEWOO DX 340 - CATERPILLAR 330D L w/ DB Link
IT HAS 100 MM PINS WITH 16.25 INCHES BETWEEN THE EARS CAN BE MODIFIED OR YOU COULD BUSH DOWN TO 90 MM PINS AND FIT MOST 300 - 350 CLASS EXCAVATORS
GEITH IS THE CADILLAC OF COUPLERS AND THE ONLY ONE WE USE
WE BOUGHT TO PUT ON OUR PC450LC-8 KOMATSU BUT IT ALREADY HAS A PERFECT COUPLER
IT WAS BUILT BY GEITH AND TAGGED FOR DOOSAN 340 BUT TAG EASILY REMOVED
THESE NEW ARE NOW $18,000.00 AND 16 WEEKS OUT
TAKE THIS NEW ONE FOR $10000.00 C/W THE NEW PINS - IT IS OUR NB YARD BUT EASILY SHIPPED FOR NO COST TO YOU IF YOU TAKE THE
SET OF BUCKETS.THIS SET OF HIGH QUALITY STEEL USA BUILT QUALITY BUCKETS CONSIST OF:
1) CLEANUP - BULK LOADING TOUGH MATERIAL SUCH AS CONCRETE - ROCK LIMESTONE - SHALE - SANDSTONE - COAL BUCKET
70 INCHES WIDE BUT DEEP FOR LOADING TRUCKS OVER THE REAR WITH NO SPILLAGE
THIS IS A RARE TOOTHED 4 YARD HEAPED - DEEP CLEANUP - BULK MATERIAL BUCKET WE USED FOR LOADING OUT BULK ROCK AND CONCRETE - 3 BUCKETS TRUCK IS GONE
AND RIPPING SHALE AND LIMESTONE ON OUR PC 450-LC-8 KOMATSU EXCAVATOR
BUCKET IS IN EXCELLENT CONDITION WITH MULTIPLE TEETH FOR RIPPING AND LOADING THAT ARE SPACED SIDE BY SIDE FOR STRENGTH AND CUTTING - LEAVES SMOOTH EXCAVATION BUT DIGS THROUGH CRUSHED CONCRETE AND ROCK WITH EASE
THIS BUCKET COST OVER $20,000.00 USD
TAKE THIS ONE FOR $10,000.00
2) 46 EXTREME DUTY DIGGING BUCKET C/W NEW KOMATUS TEETH - SIDE CUTTERS HOURS OF HARD SURFACING WELDING DONE READY TO WORK TAKE THIS ONE FOR $10,000.00
3) 30 INCH EXTREME DUTY V RIPPER BUCKET C/W ALL NEW TIGER TEETH INSTALLED - BUCKET AS NEW READY TO WORK. TAKE THIS ONE FOR $8000.00
TAKE THE COMPLET SET OF RARE EXTREME DUTY BUCKETS FOR $25,000.00
OR TAKE ALL BUCKETS AND THE GEITH COUPLER FOR $35,000.00 ALL SHIPPED TO YOU - READY TO INSTALL AND WORK NOW NOT WAIT 4 - 6 MONTHS OR NEED SHIPPING FROM US WITH CUSTOMS ETC
WILL SHIP QUICKLY AND WE GET GREAT RATES FROM OUR YARD LANGLEY BC OR IF YOU TAKE ALL - WE WILL PAY THE TRUCKING !!
Whether the task at hand involves general excavation or severe digging, regardless of the material, Hensley Attachments has the right excavator bucket for your application. The world famous, and often imitated, V-Rock bucket originated in this Mansfield, Texas shop. Hensley Attachments also makes a series of traditional excavator buckets equipped with built-in reinforcements that reduce downtime. The General Purpose, Heavy Duty, Severe Duty, and Extreme Service Duty excavator buckets also come with a cast lifting eye, and optional sidecutters.
STANDARD FEATURES ON ALL THESE BUCKETS HAVE:
* Dual taper / dual radius design
* One piece blade (T-1)
* Upper and lower side kick plate (400 BHN)
* Full bottom wear plate (400 BHN)
* Horizontal wear strips (400 BHN)
* One piece side plate
* Strike-off assemblies
* Lip (T-1)
* Formed beam upper structure
* Increased material thicknesses in high wear areas
* Cast heel wear shrouds
* Optional Bimetallic wear resistant productsRECOMMENDED APPLICATIONS:
* Granite
* Ore
* Limestone - Shale -
* Broken Slag
-
3
- 435 hours
- Tractor comes with a loader only. (backhoe & forks are not included.)
-
4
Selling KUBOTA M7060HDCC12 CAB TRACTOR
***Very low hours just 390 total***
Condition: Like new- 70HP KUBOTA DIESEL ENGINE
- 4WD
- CAB WITH HEAT &A/C
- BLUETOOTH RADIO
- 12X12 TRANSMISSION WITH SHUTTLE SHIFT
- TWO REAR REMOTE HYDRAULICS
- 11.2-20 AG TIRES
- 14.9-28 AG TIRES
- Engine replaced at 214 hours by Kubota just because of fuel vandalism.
-Clean titleAlso Includes:
- KUBOTA M26-1 SELF-LEVELLING LOADER
- BE HD4442A0600 PALLET FORKS
-
5
1979 Case 580 2wd Full Size Backhoe Loader
- Diesel 4 cylinder
- New injectors
- Fully enclosed cab
- Front end wheel loader bucket
- Rear digging backhoe excavator bucket
- Good tires
- local in Surrey BCPlease text Jason at 7788092510 to inquire
-
6
Kms
963,000.00 Kms
-
7
1988 Seasport Sportsman 2200.
5.7 l Chevrolet marine engine. 280 hp. Volvo Penta duo-prop aq290 leg.
2018 Tohatsu 9.8 hp outboard with Panther T4 autosteering.
Cuddy cabin with sink, stove, fridge, countertop.
Raymarine chart plotter.
Vberth with Thetford head.
1990 Easy rider trailer.
Bimini for back deck.
Rocna anchor and danforth anchors. 300 ft anchor line with 20 ft of chain. No mechanical anchor puller but buoy anchor puller
Downriggers + many more extras.
We adore this boat but just don't have the time to use it.
Please message for more details.
-
8
Selling my 14' aluminum zodiac boat. Very tough and made of thick guage metal, rated for 40 hp motor. Comes with galvanized trailer and nice shape 25 hp merc. Asking 4800
-
9
1968 Alberg Sloop
Built at Whitby Boat Works Ajax Ontario
License number: 330777
Serial Number: 376843
Overall length: 37' 2" (11.3 m)
Main beam: 10' 2" (3.10 m)
Draft: 5' 6" (1.68 m)
Depth: 5.61feet 1.70 meters
Gross tonnage: 11.28
Net tonnage: 10.54The vessel "SANDERLING" is a professionally designed and production line-built carvel FRP sailing vessel having a raked stem, round bilges to an encapsulated keel and reverse transom stern.
The vessel is laid out as follows, a fore deck accommodates a bowsprit with hand capstan, followed by a stay sail boom and trunk cabin abaft. A foc'sle escape hatch is situated on top of the forward trunk cabin with the main mast stepped on top of the keel. Aft of the forward trunk cabin is the cockpit helm area fitted with an access hatch leading to the lower deck spaces. Aft of the access hatch is the self-bailing cockpit fitted with helm station and built in storage lockers. There is a teak hatch aft of the cockpit giving access to the steering gear.
The accommodation space is laid out as follows, forward is an anchor chain locker, followed by a vee berth with an enclosed head to port. Next aft is the dinette/berth to starboard, across to port is a single berth, next aft on the starboard side are built in cupboards, ice chest, fridge and sink. across to port is the navigation station with a small chart table and electronic aids to navigation.
The engine is fitted on the centerline aft of the stairway leading up to the cockpit. The interior is finished to good pleasure boat standards, with teak used throughout.
The vessel is fitted with a single aluminum mast with one set of spreaders, aluminum boom, stainless steel wire stays to stainless chain plates.Machinery details:
The vessel is fitted with a single four-cylinder Westerbeke diesel engine rated at 37 hp, the engine is 12 volt starting, heat exchanged and fitted with a wet exhaust exiting through the transom. The engine is bolted to a Paragon reverse gear having a 1:1 reduction, driving through a .75" shaft to a fixed two blade propeller measuring 12x9.
Instrumentation includes a tachometer, oil pressure, volt meter, amp meter, hour meter( 2637.7 hours}The vessel is fitted with a single fuel tank located under the cabin sole, filled through deck and vented to atmosphere. Tank capacity is estimated at 24 gallons.
Steering is hydraulic.Electrics:
The vessel is fitted with a 12-volt DC system and a 110 volt- Ac system.The 12-volt system is made up of three batteries (new 2014) routed through individual shut offs and fitted with 50 amp in line breakers. The system is maintained by an engine driven alternator and wind generator.
The 110-volt system is routed through a factory installed distribution panel rated at 25amp. All circuits are routed through a main electrical panel with a DC volt meter, amp meter and in line fuse.
A 12-volt battery charger is also fitted.Navigation equipment:
Rule navigation lights, Magnetic compass
Standard Horizon MC 55S ser ZYU07042747
Furuno GP 3o ser 3433-8031
Furuno Navtec NX3000 ser 3550-48572
JRC radar model 1500 MK II ser 1.252299 dome and L222299 display Comav auto pilot AAZ00309
Multi controller AAV00309 ABK0012
Comnav mod 1510
Knot meter and depth sounder in cockpit Brass clock and barometerDeck machinery and equipment;
4- Barlow #22 halyard winches
3- Barlow #16 winches
sea furl spinnaker auto furl Lee sail spinnaker complete with sheet battened main sail
storm jib 150% Genoa new drifter
boarding ladder
The main sail is fitted with a coverCurrently located at MK Bay Marina, Kitimat BC
For any inquiries please contact Lee Johnson
Phone: 780-532-2825
email: moraglee@gpnet.ca
-
10
11’7 inflatable boat, never used, 20 hp mercury outboard, short shaft, manual start, used twice.
-
11
WE HAVE A GOOD SELECTION OF USED, FRESH WATER MANIFOLDS AND EXHAUST SYSTEMS. GREAT PRICES ON NEW MANIFOLDS SHIPPED T6O YOUR DOOR. AVAILABLE IN ALUMINUM. WE ALSO HAVE A HUGE INVENTORY OF NEW AND USED PARTS, INCLUDING LOTS OF OLDER, OBSOLETE, HARD TO FIND PARTS. 250-851-0084
-
12
$14,495+TAX
STOCK# 493664 -2024 CARGOMATE 84" x 14' ENCLOSED TRAILER IN BLACK OR WHITE
x 6" height, RV Door w cambar, 4 x 2000 lb recessed D-Rings, roof vent, stone guard upgrade, rear stabilizer jacks, spare tire, rear ramp door with spring-assist (GVW 7,000 LBS)
*FINANCING AVAILABLE
-
13
Absolutely beautiful fifth wheel for sale. Must be seen to be appreciated. Sleeps 10. Like new condition, barely used since we bought it brand new. King bed in main bedroom. Large fridge. Tons of storage.
-
14
2020 Rockwood mini lite
-Mint condition
-26’ long
-Gross weight 6869 lb.
-Tv as well as outdoor TV mount
-Indoor and outdoor speakers
-DVD player
-Blue tooth
-USB Charger
-Solar quick hook up and a panel that can be installed as well
-Indoor full size tub and shower
-Outdoor shower
-Outdoor kitchen
-Water filtration system
-Backup camera hookup
-AC ,
-Furnace
-Removable table
-Reclining couch
-Led awning light strip
-Outdoor bbq
-2 30lb propane tanks
-2 24 volt deep cycle battery
-Equalizing hitch
-Trailer cover / wheel covers
-Power awning
-Power slide out
-Plenty of storage
- bottom bunk flips up for bikes
-Two double bunks
-Table that converts to bed
-Murphy bed (queen)
Has always been properly winterized , and 1.2 ton towable. Toilet has been used for #1 only no #2’s. Mouse free, no water damage
Serious inquiries only
Only selling because kids have out grown camping and we are struggling to make time to use it.
Firm on price
-
15
STOCK # 045184
102" X 25' Tandem axle deck over trailer (GVW 14,000 lb) with 5' beavertail, 1?2-width flip over ramps, and mounted spare tire
http://cvtrailersales.com/
*Available for viewing
*Financing Available
*We also offer trailer repairs
*Trailers for Rent
FREE DELIVERY TO DAWSON CREEK
Contact us for more information, Toll-Free 1-877-785-6780 or 1-250-785-6780.
C&V TRAILER SALES AND RENTALS IS NOW THE AUTHORIZED SHOCKER HITCH DEALER IN BRITISH COLUMBIA. INVENTORY IN STOCK!
You can follow us on Facebook, Instagram & TIK TOK for daily trailer sales & deals!
Monday - Friday 8am to 5pm (closed 12pm to 1pm for lunch) *Saturday from 9am to 1pm. *Closed Sundays and Statutory Holidays (Hours may vary for long weekends)
-
16
Nice roomy pull behind. Big slide out. Lots of storage. Light use, only about 2500km on it. Comes with solar panels , full propane tanks and 30amp cord, all manuals , all hoses for sewer and water , equalizer hitch. Winterized for winter last yr, still is. Batteries kept topped up indoor stored. Closest offer to 35000.
-
17
STOCK # 281440
102" X 20' Tandem axle deck over trailer (GVW 14,000 lb) with slide in ramps, 4 - heavy duty d-rings (weld-on), and mounted spare tire
http://cvtrailersales.com/
*Available for viewing
*Financing Available
*We also offer trailer repairs
*Trailers for Rent
FREE DELIVERY TO DAWSON CREEK
Contact us for more information, Toll-Free 1-877-785-6780 or 1-250-785-6780.
C&V TRAILER SALES AND RENTALS IS NOW THE AUTHORIZED SHOCKER HITCH DEALER IN BRITISH COLUMBIA. INVENTORY IN STOCK!
You can follow us on Facebook, Instagram & TIK TOK for daily trailer sales & deals!
Monday - Friday 8am to 5pm (closed 12pm to 1pm for lunch) *Saturday from 9am to 1pm. *Closed Sundays and Statutory Holidays (Hours may vary for long weekends)
-
18
4x8 tilt deck fits lawn tractor. 1000lb axle, good tires and new spare.
New 3/4 treated deck, new lights. Used once last year. Will consider trade for a slip tank.
-
19
16' Rainbow Excursion Car Equipment Hauler Trailer tandem 2-3500# axles slide in ramps stoneguard brakes. Used very little excellent condition. Includes 2" receiver hitch, 2 5/16" ball and pin, homemade side boards. No GST or PST
-
20
STOCK # 046172
84" X 18' Tandem axle car / equipment hauler trailer (GVW 9,900 lb) with spring-assisted stand-up ramps, and mounted spare tire
http://cvtrailersales.com/
*Available for viewing
*Financing Available
*We also offer trailer repairs
*Trailers for Rent
FREE DELIVERY TO DAWSON CREEK
Contact us for more information, Toll-Free 1-877-785-6780 or 1-250-785-6780.
C&V TRAILER SALES AND RENTALS IS NOW THE AUTHORIZED SHOCKER HITCH DEALER IN BRITISH COLUMBIA. INVENTORY IN STOCK!
You can follow us on Facebook, Instagram & TIK TOK for daily trailer sales & deals!
Monday - Friday 8am to 5pm (closed 12pm to 1pm for lunch) *Saturday from 9am to 1pm. *Closed Sundays and Statutory Holidays (Hours may vary for long weekends)
-
21
New 2024 4-Star All Aluminum Stock Combo Trailer
▪︎ 24 FT Long
▪︎ 7 FT Tall
▪︎ 7 FT Wide
▪︎ Grease nipples on all hinges
-
22
Putting feelers out on my 72 Camaro RS. Car has about 1500km after complete restoration. Car has been stripped to metal and properly resorted with full photo documentation. Engine, trans, and diff are all fully rebuilt.
1972 Camaro
Split bumper front end w nose
Blue w white rally stripes
Cowl hood
Local car
Full restoration body stripped to metal
454 BB
PW alum heads
March pulleys
Moroso oil pan
ST10 4spd
McLeod clutch
8.5” 10bolt diff
373 posi
Headman headers
3” header back custom exhaust w H pipe
10 bolt rear end
373 gears
Quick ratio steering box
Subframe connectors
QA1 front coil overs
QA1 front sway bar
Rear lowering springs
Alum rad
Flex lite e fan
Dakota digital gauges
New interior
Pioneer stereo w alpine speakers
18x8 18x9.5 ridler wheels
225 + 275 michelin sport tiresWon’t take a penny less than 75k, comes with huge stack of receipts. I will not respond to is this still available. No tire kickers and time wasters. Test drives available with full payment in my hand. Car isn’t ready to go yet, still have a few minor things to do so this is just a feeler.
-
23
Very solid car ready for a motor everything is there it is a 4 speed car Tach in hood buckets console etc.
-
24
Hello, I’m searching for this 64 Corvette that I used to own.
VIN 40837S100147
It’s Silver Blue/Dark blue vinyl.
327, 2spd Automatic, PW
The current owner would’ve bought it in Strathmore AB, 2002.
Any help finding the current owner would be greatly appreciated!
Thank you
Dan 780-982-5130
-
25
Comet
1964 Comet Caliente Convertible
Lost my storage space
I put a lot of work and money into the car
Now it’s time to let it go to a new home
New breaks and break lines
New muffler
New radiator
New wiring throughout
New gauges
New starter
Rebuilt transmission
New rear air shocks
New battery and moreAsking $36000
Angelo 604 454-4540
No emails please
-
26
1715 Hours
Includes:
84″ General Purpose Bucket
Manual Coupler
Keyless StartCheck out my other ads for other cool things.
Shipping available to destinations in BC and Alberta. Provided by Load Eye Logistics.
-
27
Current CVI
3500lb Rear Lift Gate
-
28
I have a few good used plate compactors for sale
All are good runners that are ready to work
210lb units staring at $1500
500lb units starting at $4500
900lb gas units that are only about a year old staring at $8000
1000lb hatz diesels like the one pictured starting at $9500
Most under 250hrs
Located in Nanaimo but we deliver all over the mainland and BC
Call or text 604-551-6620
-
29
235 LCR Zero Tail swing, Doosan excavator, one owner/operator, 8163 hours, Cab Guard (Fops) direct link hydraulic thumb, 36" digging bucket & 60" clean up bucket, manual quick change (200 series) Plumbed for and comes with rock breaker.
-
30
Vancouver Island Hiab 4 Hire
21 Foot Flat Deck with Rear Mount Hiab Crane
By the Hour Rental $150 Per Hour- Flat Rates Available
-Hot Tub's
-Tree's
-Rocks
-Building Materials
-Rooftop Units
-Forms
-Flatdeck Service
-Hotshot
-Inquire about moving anything!
Outreach / lifting capacity (ft-lbs)
49' - 1 500
-
31
German built wacker Neuson 627 teleloader for sale.
Ready to work with annual and NDT current.
Only 735 hrs
This is one of the best small Telehandler/loaders on the market today.
Read about it here:
https://www.wackerneuson.com/us/products/telehandlers/th627-telehandler
Great machine for a farm too!
Call or text 604-551-6620 with any questions
Posting in multiple places as we own a trucking company that can arrange delivery of this anywhere in Western Canada.
-
32
ET90 excavator
1300 hrs
Thumb
Pattern control
Hydraulic pin grabber
2 buckets
Blade
Rubber tracks
Call or text 604-551-6620
We can deliver anywhere in Western Canada.
-
33
Vertially brand new super clean 2016 John Deere 314G skid steer with very low 681hrs. Comes with a 60" bucket. Has nearly new foam filled tires. Has heat no a/c , manual bucket attachement, foot controls and has auxiliary hydraulic for attachments standard flow 16gpm. Ready to work.just had a Fresh oil change,new hydraulic filter, fuel filter,air filter, both cabin filters all done at 665hrs. You won't find a cleaner machine
$47,000 or possible trade f350 or chevy 3500 Xposted
-
34
997.9 Hours
Includes:
Cleanup Bucket
Digging Bucket
Thumb
Canopy
-
35
2022 Peterbilt 567 hooklift
Price in cdn fundsOur new hook truck has landed so we’re selling this perfectly operating well maintained truck that’s ready to go to work with no issues at all!
163000 klms.
Ampliroll 50T hook
Donavan High lift tarp system.On board re-fueling tank with meter.
X15 Cummins with an ultrashift.
Heavy front and rears.
Pintle hitch
Rear hydraulic and air connections for trailer & high lift gate bins.
Custom steel fenders.This truck has been absolutely flawless and the build is top quality, done at Fort
Box and trailer in last picture not included, but could be added
We can deliver this or anything else almost anywhere through our trucking company
www.loadeye.comCall text 604-551-6620
Doesn’t come with trailer machine or bin in the picture
-
36
Good condition. I’m selling it because I no longer have time to use it.
10,400 klm, I habe the ownership in hand. No trades
-
37
137” track,Very reliable ready for the trails
-
38
2018 Polaris Switchback Assault with 144" track for sale. 1112.9 miles, runs great, no issues. Reason for selling is that we simply do not have time to use it. Minor crack in windshield and scrape on the side. Comes with 2 up seat, hand muffs and hitch.
-
39
Update, price dropped, sled runs but very sluggish. Not sure why and at this point I am done throwing money at it. Someone who knows a bit about sleds could probably fix it in no time. I am done just want it out of here. I am looking to sell my sled, it's a 97 trail touring 488. Just had a full engine rebuild, top and bottom end, this summer. I need it gone as I had back surgery and now am not able to ride anymore. New skis put on last year. It has reverse and estart, starter replaced last year. Any more questions let me know. No trades and if the ad is up it's still here.
-
40
New mountain teck front end
New ski rubbers
New oil lite bushings
Upgraded front suspension from a viper
Just under 8000km
Cover included
-
41
Havelock powersports is offer repairs to atvs and side by side golf carts utility vehicles of most makes and model can am diagnositic equipment turn that maintenance light out big or small we can fix it shop rate 80 a hour 416 722 9644
-
42
2000 Yamaha Phazer 500 with only 5,000kms
Electric start
Reverse works great
New track and studs!
Hand warmers and parking brake
oil injected, really well taken care of sled.
New plugs with a spare set of new ones as well.
Runs great quite a quick sled.
Two keys
Ownership in hand
TURN KEY
$2400 obo
-
43
Hookup and go nothing wrong with it, brand new tires, lights, wiring, bearings, axle, new leaf springs axle is 3500 lbs capacity perfect for 2 sleds or atvs led lights all around lots of tie down spots 2 spare tires included tilt and load, new safety chains, 3000 obo have ownership as well
-
44
12000km sled runs mint
New solid state starter relay
New track last year and paid 1500 for it. New front end ball joints and tie rod ends. Repaired rear tow bar that was damaged while hauling ice fishing gear is only real damage ever to occer. Great trail sled.Used vehicle package included vehicle history report included.
No accidents no claims so take it as it is.
-
45
Like new snow blower, used limited number of times over the last few years. No longer required as I have have a tractor and blower. Have all the manuals both English and French for both blower and motor. Electric chute control, up/down & left/right. All the mounting rigging is also included. New cost would be 10K$ including tax as listed on-line.
-
46
1994 Yamaha Big Bear 350
Everything works as it should
Have ownership
2800 or trade no sleds
-
47
2019 Yamaha grizzly 700, low mileage (1810), runs and drives like new, comes with bronco seat, 3000lbs warn winch, ramps, mounted light bar and brand new battery put in this year
10,500 OBO
-
48
Sleds in great shape
Serviced every year
Always stored indoors
Has quick adjust suspension and carbides
1.25 ice ripper track
6800kms
$9000obo
Text or call 705-760-2772
-
49
Selling my Polaris matryx khaos slash 155"
NO TRADES AT ALL!!!!!!!!!!
NEED TO SELL SOON, MAKE ME A REASONABLE OFFER, good chance I may say yes
LOW MILEAGE
1590 kms 68 hours
Electric start
Sled is %100 stock
Track has minor damage, spun out on some ice early season 2022, 2 paddles torn and sides have wear, I used the track in this condition for 2 seasons and it's perfectly fine to run for many more seasons
Sled is %100 ready to ride, full tank of oil, fresh fuel 1/2 tank, suspension greased and full unit inspected
Test rides can be easily arranged
Low ballers and rude comments will have their time wasted and jerked around
Message me for details and viewing time
-
50
Runs great, front end is straight.
Has its dings and scratches from mtn riding. Dog has an affection for biting the skis and grab handles.
Comes with can and rear storage. Sliders and carbrides changed last year.
Can take more pictures for serious inquiries.
$5900, no trades.