Buy and sell, Tools with in Canada, Nova Scotia, Cape Breton.
-
1
On SALE FOR A LIMITED TIME $1099.99
Manufactured in Prince George B.C. Canada
PTA-500 Product Specifications:
- Power supply voltage AC 110/220V Auto detection
- Power supply capacity 7.3 kVA
- Rated input current (TIG) 16.7 A
- Rated input current (MMA) 23 A
- Rated input current (CUT) 27 A
- Output current range (TIG) 10 - 200 A DC
- Output current range (MMA) 10 - 200 A
- Output current range (CUT) 10 - 50 A
- No-load voltage (TIG) 56 V
- No-load voltage (MMA) 56 V
- No-load voltage (CUT) 220 V
- Dia. of welding rodΦ(MMA) Max 5/32
- Arc initiation way (TIG) HF
- Arc initiation way (MMA) Touch
- Arc initiation way (CUT) HF
- Protection grade provided by enclosure IP 21
- No-load loss 50 W
- Power factor 0.93
- Insulation class F
- Duty cycle 70%
- Efficiency 85%
- Air pressure (CUT) 40-60 psi @ 4 CFM
- Gas flow (TIG) 2-5 L/min
- Gas flow (CUT) 100 L/min
- Cutting thickness (CUT) 3/4 inch @ 2.5 inches per Minute
- Weight 12 kg
- Dimension (mm) 420*210*300
What's In The Box?
- 1 piece x Ground Clamp
- 1 piece x Stick Holder
- 1 piece x Panasonic P80 torch 12ft
- 1 piece x Tig torch 12ft
- 3 sets consumables
- Regulator & water separator w/ pressor gauge
RJR Equipment Innovations LTD in a Canadian company designing quality welders and plasma cutters for the past 13 year. located in Prince George B.C
All our units come with a unbeatable 2 year replacement warranty. If you have any problems send it back to us COD and we will ship you a new unit when a tracking number is provided.
We can ship COD (Cash on Delivery) with Canada Post for a $15 fee
or We accept Visa MC AMEX and Etransfers give us a call 250.613.7523
WE WILL NOT ACCEPT CHEQUES
-
2
FOR SALE IRODA PT 200 BUTANE POWERED PRO TORCH BLUE FLAME NEW IN BOX. GOOD FOR BRAZING, SOLDERING, PLUMBING, AUTOMOTIVE, ELECTRONICS, ETC.
-
3
FOR SALE VINTAGE 18 INCH CRAFTSMAN TOMBSTONE /HIP ROOF CANTILEVER TRAYS TOOL BOX LOCKABLE AND IN GOOD CONDITION.
-
4
3 year old 2200 watt inverter generator.Enough power for a sump pump,lights or basic power needs.(Runs a Skilsaw.)just did an oil change and spark plug,New 20amp main circuit breaker.Plastic has a few cracks but works fine and is pretty quiet.
Selling only because I upgraded to one that can run my mitre saws and other tools at the same time.
Asking $250 ,sells for $840 plus tax at canadian tire
-
5
I have two hardharts with clear visors and earmuffs, still in great shape, $100 takes both
902-304-3520
-
6
Selling a master craft impact wrench works as it should. 50 obo
-
7
Craftex 1hp dust extractor FM230
-
8
Oregon PRO-LITE 16” Chainsaw bar. Brand new. Never used. Doesn’t fit my new saw.
-
9
FINANCE AVAILABLE : Brand new 2023 CAEL Tractor/Tractor and Loader/ Tractor, Loader and Backhoe with 25 HP Perkins engine, heat and roof included, EPA certified at the lowest price in the market all over canada and usa
100%customers satisfaction
https://www.capitalautoequipment.com
****Tractor Parameters *****
*Drive Type : 4WD
*Overall Dimensions L×W×H(mm): 3180×1285/1450×2290
*Wheel Track (mm) :- Front : 970/1210
- Rear : 1000/1160*Wheel Bass(mm) : 1540
*Ground Clearance (mm) : 300
*Rated Traction Force(N): 6620
*Construction Mass(kg) : 1080
*Min.Turning Radius(m) : 3.27
*Theoretical Speed (km/h) :
-Forward(low-grade) : 0~8.2-Reverse(low-grade) : 0~8.2
- Forward(high grade) : 0~20- Reverse(high grade) : 0~20
***Engine Specifications***
Model : Perkins 403F-11
Type : 3-Cylinder Vertical, water cooled,4 stroke cycle indirect injection,
Rated Power(kw/hp) : 18.4/25Rated Speed (rpm) : 2600
Bore×Stroke (mm) : 77 X 81
Total Displacement(L) : 1.131
**** Drive System****
Clutch : Monolithic dry combined with friction
Gear Box : HST+Two gears
Main Drive : A pair of spiral bevel gears
Differential : Two closed planetary wheel
Differential Lock : Tooth type
****Traveling Mechanism****
*Tyre :
- Front : 26×7.5-12 grass tire
- Rear : 11.2-20 grass tire
* Steering Gear : Full Hydraulic Steering
* Brake : Double pedal disc brakes
*** Working Device ***
* Hydraulic System :
- Lifting Capacity at 610mm Behind Lift : 3900
- Point (N) 3-Point Suspension : Category :I
* P.T.O Shaft (Rear) :
- Rotating Speed (rpm) : 540/1000
- Spline Size : 6-Φ35 Rectangular Spline
* P.T.O Shaft (Mid):
- Rotating Speed (rpm): 2000
- Spline Size : 11 teeth involute spline
1 Year Warranty on all partsPRICES :
-TRACTOR : $17650
-LOADER TRACTOR : $20499
-BACKHOE TRACTOR : $20499
-LOADER TRACTOR BACKHOE : 24499
**Optional Features**
- CLOSED GLASS CAB : EXTRA $3000
-AC $1500
ATTACHMENTS AVAILABLE:
Cultivator
Disc harrow
Mower
CONTACT ONTARIO BRANCH (365) 888-3765/ (365)317-7933
CONTACT BRITISH COLUMBIA BRANCH (604)-314-9755
We are located Hamilton, ON and Surrey, BC
We ship throughout Canada
KEYWORDS: Yanmar, Volvo, used, Takeuchi, Mini, Kubota, Komatsu, Kobelco, JohnDeere, IHI, Hitachi, excavator, dozer, construction, Caterpillar, Case, Bobcat.Hyundai, Doosan, excavators, mini excavator, mini x, mini ex, Cat, Sany, Tractor,Compact, Midi, zero tail, Terex, Wacker Neuson, JCB, track loader, skid steer,trackloader, skidsteer, LonKing, Zoom Lion, Liugong, Sumitomo, Atlas Copco,Liebherr, Mitsubishi, Samsun, Toro, Mahindra, Massey Ferguson, New Holand,Lowboy, Low Boy , Cat,
-
10
Socket Organizer
Labeling changes from standard to metric
$15
-
11
It's used for compressing valve sorings
-
12
Wholesale price : Brand new portable mobile home at the lowest price in the market all over canada and usa 100% customers satisfaction
www.capitalautoequipment.com
brand : CAEL
condition: new
paint white
type: folding movable building
size / dimensions: 19 by 20 feet
Brand New Mobile Expandable Building. The package is 8 by 20 feet which will expand to 19 by 20 feet complete when installed. Comes with built in drainage and plumbing connections for the unit. Holding and/or septic tanks are not included. Depending on local bylaws could be used as a laneway home, in- law suite, rental income unit, or student/pensioner housing or temporary accommodations for those less fortunate. Could also be used to help qualify for vacant homes tax rebate if it is used for rental purposes on your property. You decide the best use for it based on your city/town bylaws. Also makes it a great easy to care for summer cottage that can be folded up and secured during off season.
Full Set Up Video Below
https://youtu.be/IHXQeGabyD8
Price : 19,999$ + Tax
Contact me +1 (365) 888-3765 /+1 (604) 314-9755
We are located surrey ,British Columbia and Hamilton Ontario
We ship throughout Canada
-
13
Hi I have a poulan pro 260 chain saw works great text or call to make offer text or call 902-919-4433
-
14
4’x8’ in size
-
15
Up for sale is this mobile welder with a Koehler 22hp gas engine with 1730hrs on the motor. The welder is a GX300 with chopper technology. Asking $4500obo. Posting for a friend so call him for more information. Ask for Bob 902-565-7394
Here are all the specs on the Welder:
Specifications
DC Amperage Range: 20 - 305 amps continuous control
DC Voltage Range: 14 - 29 volts continuous control
Rated Output: 300 A at 29 VDC, 100% duty cycle
Auxiliary Power: 10,000 watts Peak, 60 Hz, 100% duty cycle 120/240 VAC
Weight: 540 lb (245 kg)
Dimensions: H: 39.2" (996 mm) W: 24" (610 mm) L: 48" (1219 mm)
Fuel: 9 gallons (34 litres) Fuel Consumption: 1.67 gallons (6.32 litres) per hour at rated load
Fuel Capacity: 12 gallons (45.4 litres)
Oil Capacity: 2.0 quarts (1.9 litres)
Operating speeds: Full load 3,500 rpm, high idle 3,700 rpmProcesses
Stick (SMAW)
TIG (GTAW)
MIG (GMAW)
Air Carbon Arc Cutting
Flux-Cored (FCAW)
Additional Features
Description
The GX300 is a 305 amp DC, multiprocess, 100% duty cycle, gasoline engine-driven welder with 10,000 watts peak (9,500 watts continuous) 120/240 VAC 60 Hz auxiliary power. Rugged and reliable, the GX300 welder is built to Extreme-Duty specs with a completely enclosed case and is available with an optional protective frame with base that will accept a 3-wheel shop wheel kit. With an optional adapter, the frame with base can also be mounted on a 3+3 construction trailer. Designed for welding professionals who demand a superior welding arc. CSA certifiedEngine
Kohler OHV Command CH22, 2 cylinder, 4 cycle, air-cooled, 22 HP @ 3600 RPM, 41 cu in (674 cc) gasoline engineFeatures
“Chopper Technology” delivers easy welding starts, smooth arc, low spatter and excellent weld bead appearance
Output Control is via a single, full-range, potentiometer-type output control (which eliminates output-selection taps)
Welding Mode selection includes CV-Wire, Downhill Pipe, CC-Stick and Touch Start Tig positions
Arc Control adjustment gives a softer, buttery arc or a more forceful, digging arc in CC-Stick welding mode and inductance/pinch control in CV-Wire welding mode
Built-in “hot start” for easier starts and restrikes, minimizing the electrode “sticking” to the work
Enhanced Downhill Pipe welding mode provides faster travel speeds - especially on fill passes
No high frequency is required with Touch Start Tig - you just lift the tungsten from the work to start the arc
When the torch is lifted at the end of weld, there is a voltage-sensing arc cutoff providing enhanced weld quality
Output at welding terminals can be switched to Weld Terminals On or Remotely Controlled
A Wire Feeder Voltmeter switch matches the polarity of the wire feeder-voltmeter to the polarity of the electrode
Remote output control is auto-activated when a remote control is plugged into a 3-pin MS connector and constant-speed wire feeders (such as the LN7) are controlled remotely via a 14-pin MS connector
An electric fuel pump assures consistent delivery in high altitude and warm ambient-temperature conditions
An engine hour-meter and an electric fuel-gauge mounted on the control panel are standard
The fully-enclosed sheet metal package results in a low 101.3 dB sound rating (Lwa) at rated load
Engine idle speed can be switched between High Idle and Auto Idle
-
16
Craftsman 10 radial arm saw works great
-
17
3 feet in length takes double A batteries.
-
18
GERBER RIPSTOP II - Clip Folding Knife (Sealed) - $50.00 (+shipping if required)
• 5Cr15MoV Stainless Steel Blade
• Stainless Steel Handle
• Drop Point Blade
• Plain Edge
• Nail Nick [on front]
• Frame Lock Safety Function
• Pocket Clip
• Limited lifetime warranty in North America, only 25 years limited lifetime warranty outside North AmericaNOTE: I will ship, BUT, I'll need to get a shipping cost dependent on your postal address.
* From a smoke-free home *
** All sales final **
-
19
Like new condition, always stored inside
AC/DC
3 cylinder kubota diesel motor
Only 312 hours
8000.00
Phone calls only
902-578-6889
-
20
brand new step bits for sale. First group of five, $50. Group of 3 - $30 single step bits are $10each
-
21
We are selling 2 Post Car Lifts 9,000 LBS Capacity
Certified with Warranty
Perfect for residential and light commercial garages.
We have both designs in stock RIGHT NOW
We can offer delivery and installation service throughout Canada .
***Technical Parameters****
Manual Dual-Point unlocking
Capicity:9000lbs
Lifting height: 1800mm (70.86"
Lifting time: 55 Seconds
Overall width: 3300mm (129.92")
Inside column : 2800mm (110.23")
Voltage:220V/110V
Overall height (:110.23”)
Motor power: 2.2KW
Rated oil pressure: 20MPA
Noise: ≤80dB
2 Year Warranty on Motor and Cylinders
1 Year Warranty on other parts
We are located In Hamilton, ON and Surrey BC
Price 1799 firm
Contact us (365) 888-3765 and 604-314-9755
We ship throughout Canada
https://www.capitalautoequipment.com
Keywords : 4 postparking lift tire changer tire balancer tire shop car lift truck lift semi liftcar hoist two post lift 4 post lift 2 post hoist 4 post hoist mid rise scissorlift alignment machine 3D heavy duty tire changer machine heavy duty hoist
-
22
Sliding compound mitre saw with laser brand new still in box $375
-
23
Tel: 1-800-361-4095 **** We have more than 40 years of experience to better serve you *******
The MONDIAL MR6 is a free standing 6,000 lb. capacity portable scissor lift and is the perfect lift for body shops and wheel service specialists that need extra lifting height. This portable lift easily raises a 6,000 LB. car or truck to a comfortable working height. The unique platform design allows access to some areas on the underside of the car not easily accessible with other portable mid-rise lifts.
The dual power cylinders and the solid safety lock bar, with several different lock positions, make the MONDIAL MR6 one of the most popular mid-rise lifts sold in the Canada.
The MONDIAL MR6 mid-rise lift is powered by a 110 volt power unit that is mounted on a movable cart. The power unit can be remotely located around the lift for maximum efficiency. This cart is also used to move the MR6 on a smooth surface. The lift can easily be rolled from an inside work bay to an outside concrete apron work area.
The MR6 is a complete mid-rise lift that includes one set (4) of truck adapters and another set of sliding car adapters. The arms can be adjusted to an infinite amount of positions in order to accommodate unique lifting points found on certain vehicles.
The MONDIAL MR6 has a lifting height of over 52” and remains rock solid at all safety lock positions.
1 year warranty on parts and 5 years on structure.National Shipping Available Can be picked up at your local terminal. Delivery fee's apply please contact us for details .at 1-800-361-4095
For more information contact us Tel:1-800-361-4095
Address
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
24
For sale a Diro parts washer, measures 20" deep, 36" high & 39" wide. Comes with brush and hose. No emails please. Call or text 902 727 2344. Asking 250.00
-
25
Mastercraft air hammer, works excellent
$50 obo
902-304-3520
-
26
Hand Made Knives ...made with 1095 damacuss steel with custom handles and leather sheath over 20 different knives to choose from sizes vary from 6 inch up to 16 inch ...please phone to discuss ..902-539-6997 if interested thanks for looking.
-
27
All kinds of tools for sale. Wrenches,socket sets,grinder,sander,lawn mower whipper sniper to many to mention. To view phone 902-241-2788 or902-577-3761 NO EMAILS PLEASE POSTING FOR SOMEONE ELSE! 225.00
-
28
Set of ladder jacks. Posted in tools, ladders, scaffolding in Cape Breton. January 10, 2021
-
29
low head room hand chain hoist. if its posted its available.
-
30
Works excellent, just upgraded. $250.00 902-919-4699
-
31
Brand new small electric motor mount
7" inside measurement from bracket to bracket
-
32
Works well
-
33
Vintage Double 20" Blade Carpenter Hand Saw $15
-
34
Used around the yard,starts on 2nd pull ,runs like new . 2015 sweden parts,assembled in usa
-
35
Like it says quick drive with DeWalt gun for sale
-
36
We have the right equipment for you site clearing project. From removing the trees to pulling the stumps, piling and pushing them, smoothing out the ground, raking it smooth or spreading our screened soil, then applying the lime, seed , and fertilizer. We can take it from start to finish leaving you with a beautiful green area, feild , lawn. This time of year is a good time to get a jump on your project. Please contact us discuss your project options and prices today.
-
37
Vintage Wood Planer, it uses old razor blades. Made in the USA. Shipping available.
-
38
Motomaster Eliminator.
2M Series Spotlight/Lantern Combo.
Please Contact @ 9025651333
-
39
Looking for a small set of oxygen/ acetylene bottles. The no contract size. Thanks Joel. 1-587-586-2945
-
40
Frames gun nailer. Must be capable of using 3 1/2” nails.