Mobile Welder NEW PRICE $4500
Description
Up for sale is this mobile welder with a Koehler 22hp gas engine with 1730hrs on the motor. The welder is a GX300 with chopper technology. Asking $4500obo. Posting for a friend so call him for more information. Ask for Bob 902-565-7394
Here are all the specs on the Welder:
Specifications
DC Amperage Range: 20 - 305 amps continuous control
DC Voltage Range: 14 - 29 volts continuous control
Rated Output: 300 A at 29 VDC, 100% duty cycle
Auxiliary Power: 10,000 watts Peak, 60 Hz, 100% duty cycle 120/240 VAC
Weight: 540 lb (245 kg)
Dimensions: H: 39.2" (996 mm) W: 24" (610 mm) L: 48" (1219 mm)
Fuel: 9 gallons (34 litres) Fuel Consumption: 1.67 gallons (6.32 litres) per hour at rated load
Fuel Capacity: 12 gallons (45.4 litres)
Oil Capacity: 2.0 quarts (1.9 litres)
Operating speeds: Full load 3,500 rpm, high idle 3,700 rpm
Processes
Stick (SMAW)
TIG (GTAW)
MIG (GMAW)
Air Carbon Arc Cutting
Flux-Cored (FCAW)
Additional Features
Description
The GX300 is a 305 amp DC, multiprocess, 100% duty cycle, gasoline engine-driven welder with 10,000 watts peak (9,500 watts continuous) 120/240 VAC 60 Hz auxiliary power. Rugged and reliable, the GX300 welder is built to Extreme-Duty specs with a completely enclosed case and is available with an optional protective frame with base that will accept a 3-wheel shop wheel kit. With an optional adapter, the frame with base can also be mounted on a 3+3 construction trailer. Designed for welding professionals who demand a superior welding arc. CSA certified
Engine
Kohler OHV Command CH22, 2 cylinder, 4 cycle, air-cooled, 22 HP @ 3600 RPM, 41 cu in (674 cc) gasoline engine
Features
“Chopper Technology” delivers easy welding starts, smooth arc, low spatter and excellent weld bead appearance
Output Control is via a single, full-range, potentiometer-type output control (which eliminates output-selection taps)
Welding Mode selection includes CV-Wire, Downhill Pipe, CC-Stick and Touch Start Tig positions
Arc Control adjustment gives a softer, buttery arc or a more forceful, digging arc in CC-Stick welding mode and inductance/pinch control in CV-Wire welding mode
Built-in “hot start” for easier starts and restrikes, minimizing the electrode “sticking” to the work
Enhanced Downhill Pipe welding mode provides faster travel speeds - especially on fill passes
No high frequency is required with Touch Start Tig - you just lift the tungsten from the work to start the arc
When the torch is lifted at the end of weld, there is a voltage-sensing arc cutoff providing enhanced weld quality
Output at welding terminals can be switched to Weld Terminals On or Remotely Controlled
A Wire Feeder Voltmeter switch matches the polarity of the wire feeder-voltmeter to the polarity of the electrode
Remote output control is auto-activated when a remote control is plugged into a 3-pin MS connector and constant-speed wire feeders (such as the LN7) are controlled remotely via a 14-pin MS connector
An electric fuel pump assures consistent delivery in high altitude and warm ambient-temperature conditions
An engine hour-meter and an electric fuel-gauge mounted on the control panel are standard
The fully-enclosed sheet metal package results in a low 101.3 dB sound rating (Lwa) at rated load
Engine idle speed can be switched between High Idle and Auto Idle
- Ad Type: Offering
- For Sale By: Owner
buy and sell | tools | Ladders & Scaffolding
2021-05-10