Buy and sell, Tools, Power Tools with in Canada, British Columbia, Fraser Valley, Chilliwack.
-
1
2X NEW 20V 3.5 AmpHour Lithium Battery for Dewalt 20 V Max XR Cordless Tools.
Chilliwack , you pickup.
$70 for 2 or $40 each prices are FIRM
-
2
Very good fencing pliers
-
3
This sprayer was never used. It comes with sprayer tip #515 and their are two other tips #313 & # 515. I have mounted the sprayer on a wheeled cart. Check Home Depot for prices
-
4
I have a large selection of these Utility Tools starting at 25 cents
-
5
SIMONZ S1600
-
6
1. Maximum made by Mastercraft
2. Magnetic Screw Guide
3. Seven pieces
4. Hardened alloy steel
5. 1/4" hex shank
-
7
Your choice for $5.00 each
-
8
Heavy Duty 1" CP796 Air Wrench
Hardly used, works very well.
New $3,000. +
Mechanic retiring.
-
9
12 drawers, 36" inches wide, 62" tall, caster wheels no dents or dings. Tools not included .
-
10
Call us with any questions 250-613-7523
PC-34 Plasma Cutter Product Specifications:
Model: PC-34
- 60A Plasma Cutter (Air)
- DC INVERTER
- Uses Compressed Air needs 40-65 PSI @ 4CFM
- Dual Voltage 110 20amp/220V 30amp 50/60Hz Auto Detection
- Maximum Cut: 1 1/4" @ 4 inches per Minute
- ALL BRAND NEW Transistors/(IGBT)
- Duty Cycle 70% @ 60 Amp
- Power Factor: 0.93
- Efficiency: 85%
- Dimensions: 18.11 x 10.04 x 15.98"
- Pilot Arc
What's In The Box?
- 1 piece x Earth Clamp
- 1 piece x Panasonic P80 torch 12ft
- 2 sets cconsumables
- Regulator & water separator w/ pressure gauge
Ships in 1 day and takes 2-8 days to arrive within Canada
Shipping is a Flat rate of $50 in Canada
We are fully accredited with the BBB (Better Business bureau) https://www.bbb.org/We hold a A+ rating
Check out our website for DEMO videos
https://www.rjrequipmentinnovations.com/product/pc-34-plasma-cutter/
All our units come with a unbeatable 3 year warranty.
We can ship COD (Cash on Delivery) with Canada Post for a $15 fee
or We accept PayPal, Visa, MC AMEX and Etransfers give us a call 250.613.7523
WE WILL NOT ACCEPT CHEQUES
-
11
1. Prices starting at $1.00
2. I have a variety of screwdrivers, wrenches, vice grips, pliers, crescent wrenches, ratchets, side cutters, needle nose pliers ; as well as, other miscellaneous sets & items
3. The 95 piece Mastercraft screwdriver set is SOLD
-
12
New Bostitch fraiming nailer
604 363 8148
Toni
-
13
Starting at $1.00
- work gloves (leather)
- work gloves (canvas)
- work gloves (cloth)
- winter gloves (assorted materials)
-
14
Hardly used & lightweight 3/4" Ingersoll Rand Impact Gun New $1200.
Mechanic retiring
-
15
Mastercraft Table Saw. Works great and barely used. Need the space and must sell. $100 OBO
-
16
Brand new "The Club" steering wheel lock. Recently seen listed on Amazon for $34.99 plus taxes.
-
17
*** Finance Available ****
BRAND NEW WATER/SEPTIC TANK & WATER TANK 1000L/2000L/2500L at the lowest price in the market all over canada and usa 100% customers satisfactionhttps://www.capitalautoequipment.com
1000L $799 (4MM THICKNESS) ST100L
2000L $1199 (7MM THICKNESS) ST200L
2500L $1599 (7MM THICKNESS) ST250L
***** Can be used as a septic holding tank or as a clean water tank *****
Tanks can be single or tanks can be bought in multiple put in a series, connected together to have a higher litre than shown in the ad
Please contact us for more details information and also checkout the manual on our website
CONTACT ONTARIO BRANCH (365) 888-3765/ (365)317-7933
CONTACT BRITISH COLUMBIA BRANCH (604)-314-9755 / (604)674-6050
We are located Hamilton, ON and Surrey, BC
We ship throughout Canadakeywords : septic tank septic tank pumping septic pumping near me septic tank cleaning septic tank pumping near me septic system septic service near me septic tank serviceplastic septic tanks concrete septic tank
-
18
Brand-new stainless steel storage bench
-
19
dynapac s100 small paver for sale, only 90 hrs, like new one. can use for small pathway job.
-
20
Brand-new stainless steel storage bench
-
21
Heavy Duty 1" CP796 Air Wrench
Hardly used, works very well.
New $3,000. +
Mechanic retiring.
-
22
LIKE NEW VERRY LITTLE USE ,NEW RETAILS FOR $135.00 CASH ONLY FIRM THANK YOU CALL LEAVE MESSAGE WILL CALL BACK RIGHT AWAY LEAVE NUMBER ANSWERING MACHINE USED TO MANY CRANK CALLS THANK YOU $65.00 - reduced $50.00
-
23
0-12" STM Micrometer set.
All of them are accurate and only one of them is missing the ratcheting thumb screw. All other thumb screws work and ratchet properly.
-
24
This box is in excellent condition and holds a ton.
-
25
Industrial quality, 240 volt 4’ dia. 6 blade fans.
Welded rolling bases
Used very little.
Paid $850 each without custom baseshave 2 at $ 500 each.
Don’t try to talk me down or price goes up
Ken
604-551-5448
-
26
One owner machine, purchased new in 2003 from Sharp Machine Tools. 2HP - 220 VAC single Phase. Fully geared headstock 18 speeds (65 - 1810 RPM). Hardened and ground ways. Can cut 32 imperial threads and 32 metric threads. Spindle bore 1.5". MT5 spindle / MT3 Tailstock. Swing over bed 12.6" or 17.7" over gap. Length between centers 39.4". Comes with 2 Axis DRO installed. 8" 4 jaw chuck, 6" 3 jaw chuck, 10" faceplate. 4 way Q/C tool post with 7 carbide tools. Center and follower rests. Work light & coolant system. Foot brake and carriage limit switch. Chip and splash guards. Removable chip tray. Micrometer stop for carriage. Additional lead screws and dials to convert both cross and compound slides to true metric. Still powered and available for demo. Contact for additional info.
-
27
Starting at $1.00
- work gloves (leather)
- work gloves (canvas)
- work gloves (cloth)
- winter gloves (assorted materials)
-
28
Hardly used & lightweight 3/4" Ingersoll Rand Impact Gun New $1200.
Mechanic retiring
-
29
Brand new "The Club" steering wheel lock. Recently seen listed on Amazon for $34.99 plus taxes.
-
30
10 000lbs comes with stabilizer bars, and hookups
-
31
Craftsman 8 1/4 in. Sliding Compound Mitre Saw for sale. Excellent condition.
-
32
1. Prices starting at $1.00
2. I have a variety of screwdrivers, wrenches, vice grips, pliers, crescent wrenches, ratchets, side cutters, needle nose pliers ; as well as, other miscellaneous sets & items
3. The 95 piece Mastercraft screwdriver set is SOLD
-
33
Strongarm 1500 lb engine stand in excellent condition. Used 2 times only.
-
34
Selling brand new in box
The Champion Power Equipment 4650-Watt Inverter Generator.
Reliable 212cc Champion engine produces 4650 starting watts and 3650 running watts, and runs for 14 hours at 25% load when the 2.3-gallon fuel tank is full.
Ultra-quiet and ideal for camping, tailgating, powering items around the RV or providing backup for your essentials.
-
35
A 8 1/4 table saw still in the sealed box of or sale at $450.
-
36
Selling a RYOBI 40V Power Station Lithium Battery Inverter. Provides 1,800 continuous Watts of clean power, this inverter is perfect for powering TV's, Fans, Refrigerators and small electronics. This unit is ideal for indoor use with zero emissions and quiet operation. Doubling as a super charger, it has the capacity to sequentially charge up to 4 RYOBI 40V batteries when connected to power. You can monitor battery levels and power consumption with the on-board screen or remotely on your smartphone with the GENControl app. GENControl also enables you to shut off your Power Station or reset it from your phone if it overloads. The batteries are part of the RYOBI 40V family and compatible with 75+ RYOBI 40V products.
Will add one 40V 4ah and one 40v 2ah batteries for an additional $200
-
37
This saw is no longer meeting my needs. Works great.
-
38
Starting at $1.00
- work gloves (leather)
- work gloves (canvas)
- work gloves (cloth)
- winter gloves (assorted materials)
-
39
Lincoln shop welding machine cv
-
40
on sale till jan 31
$1199.99
Regular price $1399.99
Manufactured in Prince George B.C. Canada
PC-34 Plasma Cutter Product Specifications:
Model: PC-34
- 60A Plasma Cutter (Air)
- DC INVERTER
- Uses Compressed Air needs 40-65 PSI @ 4CFM
- Dual Voltage 110 20amp/220V 30amp 50/60Hz Auto Detection
- Maximum Cut: 1 1/4" @ 4 inches per Minute
- ALL BRAND NEW Transistors/(IGBT)
- Duty Cycle 70% @ 60 Amp
- Power Factor: 0.93
- Efficiency: 85%
- Dimensions: 18.11 x 10.04 x 15.98"
- Pilot Arc
What's In The Box?
- 1 piece x Earth Clamp
- 1 piece x Panasonic P80 torch 12ft
- 2 sets cconsumables
- Regulator & water separator w/ pressure gauge
Ships in 1 day and takes 2-8 days to arrive within Canada
Check out our website for DEMO videos and specs
https://www.rjrequipmentinnovations.com/product/pc-34-plasma-cutter/All our units come with a unbeatable 2 year replacement warranty. If you have any problems send it back to us COD and we will ship you a new unit when a tracking number is provided.
RJR Equipment Innovations LTD in a Canadian company designing quality welders and plasma cutters for the past 12 year. Located in Prince George B.C
We can ship COD (Cash on Delivery) with Canada Post for a $15 fee
or We accept Visa, MC AMEX and Etransfers give us a call 250.613.7523
WE WILL NOT ACCEPT CHEQUES