Buy and sell, Tools with in Canada, Alberta, Edmonton, City of Edmonton.
-
1
https://www.amazon.ca/Bosch-GBH18V-45CK27-PROFACTOR-Connected-Ready-Exclusive/dp/B09FFV745Q/ref=sr_1_1?crid=NDV57DUQSW83&dib=eyJ2IjoiMSJ9.yP-tPCUYgk4C25ZmkmG1xA.rGyYvzLLl1U1Q_A86tyWFCCuZfXwkRRuR0YKhHWVHuE&dib_tag=se&keywords=bosch+18v+hitman+45ck27&qid=1712768900&sprefix=bosch+18v+hitman+45ck27%2Caps%2C176&sr=8-1
-
2
Tool Box to provide storage for all your needs in one unit
Locker style with 5 cubby’s left side
All drawers and doors open and shut easily
6 deep drawer
6 shallow drawer
2 bigger style cubby’s on top
All doors lockable have keys
-
3
48 inch square bull float with 8 foot extension
-
4
Used only once. Excellent condition. Like brand new
-
5
I’m posting for my step mom. After my fathers passing she needs to sell these items. After I view messages I will pass her # onto you
Only serious injuries Saw Bench Table
-
6
Selling for family member
9inch table saw.
-
7
$35
TOOLS ONLY
Brand new
Crarftsman 1/4 impact
Driver kit
No batteries and charger
Meet up or pick
West end closed to
Wem mall
-
8
Never used comes w box asking 100 obo
-
9
All set of 4 $20 heavy steel used $5 each
North Edmonton location
Selling extra tools
No refund or return no shipping cash payment upon purchase
-
10
Cordless drills availabile.
Also cordless light. 20.00
With batteries
Drills 30 each
light 20
-
11
This is an overstock item from last year. Item has never been used or set up. Item has been sitting outside for the past year. Item purchased for $5040.
Features
Reinforced, fully welded industrial use structure with a powder-coated steel frame finish can hold its own on any job site and is resistant to rust and corrosion
Automotive engine type rubber cushions added on the base to reduce vibration and noise while operating as well as reducing wear and tear over time
Diesel oil fired burner with stainless steel housing that can heat water to approximately 85℃ in just under three minutes for more cleaning power
Flame detector integrated to provide signals with accurate timing for the fuel pump and 12V DC ignitor ensuring reliable startup on every use
All-in-one operation control panel that includes an adjustable thermostat, on/off switch and easy-to-use water pressure settings
Compact design and attached lifting bar for convenient mobility while working, between job sites and taking in and out of storage
100’ high pressure ⅜” hose with a hose reel mounted allows you to work around big vehicles or farm equipment and also cover large floor spaces, driveways or buildings
Specifications
Pressure range: 3500-4000 PSI
Flow rate: 4.0 GPM
350,700 BTU per hour
Burner coils: 20mm, 12 GA
Temperature rises to 85 °C in 2.5 minutes (average)
High-pressure hose: ⅜” x 100’
Five quick coupler nozzles: 0°/15°/25°/40° and one chemical
Downstream chemical injection system
Water supply: Tap water
5-gallon poly fuel tank
13” pneumatic tires
Pump:Triplex plunger pump
Oil bath crankcase
Thermo pump protector
Gearbox drive
Stainless valves
Brass manifold
Engine:14 HP Kohler CH440 Command Pro Series Engine
Displacement: 429 cc
Starter type: Recoil & electric start (battery included)
Cast iron cylinder liners
Oil Sentry automatic shutdown
Accessories:100’ high pressure hose and hose reel
3’ spray wand and gun assembly
Five nozzles
-
12
220v input , 24v output battery charger for electric pallet jacks and fork lifts. 220v input. $525.00 OBO Don't waste you time sending text or kijiji message as they can't be answered, give us a call at 780-970-238six if you are interested in acquiring this item..
-
13
Flooring Cutter
-
14
Selling as complete set - Ideal for roofers
Dorsal D-ring
5 points of adjustment (2x legs, 2x torso, 1x chest)
Capacity: 160 kg (352 lb.)
X in PVC that prevents tangling
Easy doning leg straps
CSA Z259.10 Class A and ANSI Z359.1 approved
Manfactured 04/2022.
-
15
$5 each
Second hand used selling extra tools
-
16
Miller 25' tig torch
Never been used. Bought it forever ago but isn't compatible with my old machine so here it sits.
$200.00 obo
-
17
Selling a Milwaukee 6519 Sawzall Reciprocating Saw 12 Amp with case. Works great no issues.
-
18
Dewalt has about a hour uses. Other is old but works great. Ad is up it’s available and I am 5 miles east of Beaumont.
-
19
For sale are approximately 19 oxygen and acetylene regulators, 1 flow meter, a couple of valves, an acetylene flash arrestor, and approximately 43 welding/brazing torch tips (0-4). All regulators were last calibrated and used at NAIT and bought at auction. $350 OBO for everything or if you’re interested in a few items send me an offer. Thanks
-
20
Welding reel 100ft cable
$1200
-
21
All set brand new..please contact 7809163099
-
22
For sale is a new King Canada variable speed sander. Bought for a project but never used. $275 OBO.
Featuring a telescopic extension allowing you to reach from 45" to 65", this drywall sander is perfect for sanding ceilings, walls, cleaning floor residues, and sanding down paint coatings and various adhesives. With an LED light for those low lit environments, this sander can be used on its own or connected to a vacuum with the included dust hose. Vairable speed dial and a lock-on button allow for continuous operation, this powerful heavy duty industrial dry wall sander includes 6 hoop & loop sanding papers and comes with its own sturdy carrying case.
-
23
NEW IN BOX
PORTER-CABLE 59381 Hinge Butt Template Kit
Offers a quick, simple and accurate solution when hanging multiple doors
Provides the capacity to hang both 3 and 4 hinge doors
3 hinge template set up enables the routing of hinges on doors and frames between 6' and 7' in height
4 hinge template set up enables the routing of hinges on doors and frames between 7 feet and 8 feet in height
Accommodates hinge sizes from 3-inch to 6-inch, in 1/2-inch increments
$450
https://www.grainger.ca/en/product/p/PTC59381?cm_mmc=PPC:+Google+PLA&gclid=EAIaIQobChMIm-_99tz5-gIVW_LjBx2FQQV1EAQYASABEgL8UvD_BwE&gclsrc=aw.ds
-
24
7000w generator peak 8750w
Honda gx390 engine
Rough looks but runs prime like a honda
New carb and tune up
Has electric startInteresting trade offers welcome as well
-
25
NEW box of "Do Not Operate" lock-out stickers.
Tags-By-The-Roll brand (by Accuform Signs)
-
26
Works with some adjustments... Best offer..
-
27
2 very old wooden levels.
The red one is 24” long X 2 1/2” wide X 1” thick.
The wood grain one is 18” long X 2” wide X 1” thick.
Both are usable but these would also make great accessories for a carpenter’s home or a gift for a lifetime tradesman.
$20 for both or $15 each.
-
28
Top Chest model number KRL120APLB.
Bottom chest model number KRL7022CWCR.
Height 66 1/2 inchs. Width 54 1/4 inchs. Depth 29 inchs.
-
29
CLOSEOUT ONLINE AUCTION - MILLWORK EQUIPMENT
WEST ISLE DESIGN LTD. - MFRS. OF STAIRCASES & RAILINGS
Millwork equipment, tools & inventoryDATE: Tues., Mar. 21st, 2023 - First lot closes at 10am
PLACE: 110 - 2700 Simpson Rd., Richmond, BC
Preview: Mon., Mar. 20th - 9am to 4pm
-
30
150 hours Welder . Posted in tools, power tools in Edmonton. December 31, 2022
-
31
Plastic case for a Dewalt DW954 cordless drill. Buy the case and I'll throw in the drill and two batteries for free. I did not get a charger with it, so I dont know whether it works.
-
32
Sebbyz Welding And Custom Fabrication
Custom slip tanks for sale
Any size
All tanks are built custom to order currently nothing in stock
Shoot us a text at (780) 281-1424
Or email at
Bradensebjanic@sebbyzwelding.com
For a quote
-
33
Selling my klein tools hole saw kit. The 1 3/8” hole saw hit a screw and the teeth are worn down but still goes through drywall.
$40 obo
-
34
Great condition best gas can and job site approved 75 dollars all 3
-
35
Carpenter Tool Belt. If the ad is up, the item is still available. Pickup in Castledowns.
-
36
Like new Freud FT1700VCE Router. It's mid size makes it easy to hold and spins slow enough for the largewr bits. It has a solid base or a plunge base. Variable speed from 8,000 rpm to 32,000 rpm. Can use 1/4" or 1/2" shank bits. comes with guard and tools for adjusting depth. comes with a few different shaped and size bits and storage bag. Works great for most router jobs you want to get done! Reg price is over $430 asking $200 o.b.o.
-
37
Need somewhere to store your tires? Makes it easy to store some tires. Holds 4 tires. $20.
-
38
Have a sweeney torque multiplier for sale. 3.5 to 1. 3\4 drive input to 1 inch output. Max ouput 2000 lb ft.
500 obo
Call dan at 5879748593 if interested.
-
39
Load Cells & Pressure Sensors: Measure the forces being applied on your oil rig instruments with greater accuracy than before with the help of load cells and pressure sensors. Contact instruments manufactures highly reliable and durable load cells and pressure sensors capable of withstanding highly moist and corrosive atmosphere.
To view our broad range of Load Cells & Pressure Sensors visit: https://www.contactinstruments.com/mdse/load-cells-pressure-sensors.html
-
40
Are you looking for Mud Pressure Gauges? Contact Instruments is your one stop solution for Oilfield Instrumentation that are not just highly durable but also accurate and reliable. Our Mud Pressure Gauges are engineered to perfection to ensure that you get the most out of your drilling operations. To view our broad range of Mud Pressure Gauges visit us at: https://www.contactinstruments.com/mdse/mud-pressure-gauges.html
-
41
sear craftsman brand is running good
-
42
Drilling Mud Pump For Sale: Are you looking for Drilling Mud Pumps?
Contact Instruments is your one stop solution for Oilfield Instrumentation that are not just highly durable but also accurate and reliable. Our Mud Pressure Gauges are engineered to perfection to ensure that you get the most out of your drilling operations.
To view our broad range of Mud Pressure Gauges visit us at:
https://www.contactinstruments.com/mdse/mud-pressure-gauges.html
-
43
Used Bosch saw saw (recipracating saw) works great a little worn
-
44
Our Type F Standpipe Pressure Gauges are highly reliable and robust and is equipped with an easy-to-view, liquid filled and full faced dial to capture accurate readings. These Standpipe Pressure Gauges are even capable of withstanding rig vibrations, over-pressure situations and kicks etc.
For more info Call us at 780-955-899 or to order online visit us at:https://www.contactinstruments.com/mdse/standpipe-pressure-gauge-f.html