Cars & vehicles with in Canada, British Columbia, Vancouver, Delta/Surrey/Langley.
-
1
EXCAVATOR
BRAND NEW 175 HYDRAULIC HORSEPOWER SHEET PILE DRIVER QUALITY BUILT IN THE NETHERLANDS FROM A COMPANY THAT HAS BEEN BUILDING ATTACHMENTS FOR 25 PLUS YEARS
360 DEGREE CONTINUOUS ROTATION - LOCKING SHEET PILE CLAMP SYSTEM TO SECURE FOR PICKING AND DRIVING PILES
AND FOR PULLING PILES OFFERING:
85 TONS OF ECCENTRIC FORCE
75 TONS OF VIBRATION FORCE
FREQUENCY OF 2800
HYDRAULIC PRESSURE - 320 BAR
HYDRAULIC FLOW 260 LPM
2 LARGE ECCENTRICS AND 12 VIBRATION ISOLATORS
175 HYDRAULIC HORSEPOWER SHEET PILE DRIVER AT THE HEAD POWERED BY EXCAVATOR AUXILARY HYDRAULIC CIRCUIT - NO REMOTE POWER PACKS REQUIRED
EXCAVATOR CLASS 45-65 TON
EXTENSION ARM WEIGHT 800 KG
COMES COMPLETE WITH ALL HOSES AND THE EXTENSION ARM
THIS IS SET UP BUSHED DOWN WITH 100 MM PINS - BUT SET UP TO TAKE 110 - 120 MM PINS
WE BOUGHT TO PUT ON OUR LONG REACH CUSTOM BUILT 1.3 MILLION PC450LC-8 TO TO REPLACE LARGE CRANES TO DRIVE 40-50-60 SHEET PILES IN TIGHT LOCATIONS
THIS MACHINE CAN DRIVE 40-50-60 FOOT SHEETS PILE REPLACES LARGE CRANE MOUNTED UNITS WITH POWERPAK HYDRAULIC UNITS AND REDUCES YOUR CREW FROM A 4 OR 5 MAN CREW TO 2 AND WILL DRIVE 4 TIMES AS MANY SHEETS PER HOUR PLUS READY TO DRIVE PILES 1/2 HOUR AFTER ARRIVING ON-SITE NOT A DAY LIKE CRANES AND WILL WORK IN TIGHT LOCATION AND SWAMP GROUND JUST USING WOOD PADS IF REQUIRED
MACHINE THEN CAN BE USED ON THE JOB FOR ALL EXCAVATOR WORK REQUIRED - THEN REMOVE THE SHEET PILES WHEN THE EXCAVATION IS DONE - NO SECOND MACHINE REQUIRED - THIS MACHINE WAS PUT TOGETHER FOR A LARGE JOB IN SWAMPY GROUND FOR BUILDING A BRIDGE WHERE THERE WERE 40 FOUNDATIONS THAT WERE 30 FEET WIDE X 50 LONG THAT AFTER DRVING THE SHEETS NEEDED TO BE EXCAVATED TO A DEPTH OF 20 FEET - BUT DUE TO COVID THAT JOB WAS PUT AND REMAINS ON HOLD.
THIS IS NOT A SPAGETTI BOOM LONG REACH - USE LARGE 12000 ft lb HYDRAULIC HAMMERS - 10,000 LB HYDRAULIC DEMOLITION PROCESSORS - GRAPPLES - HYDRAULIC DUAL DRUM GRINDERS - PLATE COMPACTORS - DIG WITH VARIOUS BUCKETS UP TO 4 YARDS ALL WITH ONE MACHINE
OR TAKE THIS SHEET PILE UNIT FOR $125,000.00 AND WE HAVE A PROFESSIONAL APPRAISAL ON IT FOR $220,000.00 - SINCE THAT APPRAISAL STEEL AND COST OF MANUFACTURING HAVE ALL INCREASED DRAMATICALLY
HAVE FACTORY INSTALLATION AND PARTS AND OPERATOR'S MANUAL
OR FOR SALE WITH THE KOMATSU LONG REACH FOR $500,000 - SEE MY OTHER ADS FOR THIS VERSATILE MACHINE READY TO WORK NOW WITH THIS SHEET PILE HEAD
FRANK 604-476-7777
FROM THE HYDRARAM WEBSITE:
Hydraram, we bring the muscle!
Hydraram has been producing attachments for use in demolition, recycling and green industry for over 25 years.
We supply a complete line of hydraulic attachments for excavators from 1 to 300 tons.
We specialize in all hydraulic attachments for all types of excavators.
The Hydraram products stand for quality, durability and productivity! Hydraram attachments are used around the world every day by many international companies in the the civil engineering sector, demolition, scrap processing, as well as recycling and forestry companies.
We sell our equipment through an extensive dealer network which provides perfect service. Because of this, we are able to help you choose the right attachment, and receive perfect after-sales support, maintenance and repairs.
With us you are at the right place for:
* New attachments
* Used attachments
* Rental (by HYDRARENT)
* Service & maintenance
* Repairs
* New & used partsWe always have the correct type of attachment. They are of high quality, durable, and always made to match your needs and requirements. Keeping attachments in stock helps us keep shipping times as short as possible.
NOTE: The Appraisal Shown in Image 6 does not take into account the cost of the New $150,000.00 Factory Komatsu Log Loader Boom c/w pins and cylinders or the cost of Importing the HydraRam Sheet Pile Driver from Europe or the $200,000.00 plus spent to complete the machine to its current finished state.
-
2
THIS BRAND NEW NEVER INSTALLED BUCKET DOES IT ALL WITHOUT CHANGING BUCKETS - MAKES A THUMB OBSOLETE AND WORKS THRU THE ENTIRE BUCKET ROTATION -SEE YOUTUBE VIDEOS:
https://youtube.com/watch?v=VYxdToqeleI
https://youtu.be/BV5EeyGm5OM
APPLICATIONS :
FORESTRY • PIPELINE • ROAD BUILDING • RIPRAP • MINING • DEMOLITION • MARINE/DREDGING
WASTE MANAGEMENT • SOIL REMEDIATION • SCREENING • TRUCK LOADING FOR ALL MATERIALSEXCAVATOR CLASSES FOR THIS 60 INCH XHAND WILL FIT ALL 200 / 250 / 300 - CURRENTLY SETUP WITH WBM LUGGING FOR 200-240 CLASS MACHINES
TAKE THIS $60,000.00 PLUS BUCKET FOR $30,000.00 AND HAVE WORKING NOW - NOT WAIT 4 MONTHS TO HAVE ONE BUILT
WE SHIP QUICKLY AND GET GREAT RATES
FRANK 604-476-7777 OR TOLL FREE 1- (833) 693-9323
ONLY REQUIRES 1 HAMMER OR HOEPACK HYDRAULIC CIRCUIT AND JOY STICK ELECTRIC CONTROL TO RUN AS CONTROLLEDS BY DAN FOSS VALVES.
DIGGING: Digging and clean-up capabilities in ONE attachment - SEE VIDEO
https://youtu.be/dkm0dxBI5BU
ROAD BUILDING -
https://youtu.be/DSooBNHheLs
DOZING Moving material forward and back, with double edge grading functionality - SEE VIDEO
https://youtu.be/5-girnvgBr0
SHOVEL LOADING Forward loading from the ground up for increased efficiency - SEE VIDEO
https://youtu.be/hifN_8J5n5M
GRABBING Full-width double-sided grabbing for maximum productivity - SEE VIDEO
https://youtu.be/95FmPIOywA4
SCREENING Filtering debris using both screening surfaces, saving time and money
https://youtu.be/a3-0p5oB5ko
PILING BRUSH - MOVING LOGS -
https://youtu.be/zQbNwrE5Y3c
EXCAVATOR CLASSES FOR THIS 60 INCH XHAND 200 / 250 / 300
SCREEN SIZE OPTIONS - 3″
After attending the Canada North Resources Expo held in Prince George on May 26th and 27th, 2017; XHand Inc. was featured as a noteworthy exhibitor at the event.
A highlight video was produced, speaking with XHand Inc. President, Dean Perrey.
Logging and Sawmilling JournalMay 2017 – Prince George
Also following the attendance at the Canada North Resources Expo, XHand Inc was featured by an article written and published in the Logging and Sawmilling Journal.
-
3
367
2023 peterbilt 367 Extended Cab with comercial highlift steel box. Plumbed for qurd and pup 84,000km 1900 hours. Truck is working everyday and will change. Cummins x15 565/2050 eaton 18spd 4.10 gear ratio and 46 diff. Extended warranty engine and after treatment, cooling system 5year/480k with towing packages. Arne Qurd wagon 2007 available also. Unit price $333000
-
4
26ft box
Aluminum tailgate 3500lb capacity
98’ clearance
Hydraulic Brakes
-
5
RARE LOW HOUR 2019 22000 LB MINING SERIES LITTLE USED RIPPER FOR ROCK - SHALE - SANDSTONE WAS ON PC650 KOMATSU WORTH $300,000.00 PLUS NEW
IMAGE 3 SHOWS THE PRODUCTION COMPARISON BETWEEN A HR50 WHICH IS A TOY COMPARED TO MY HR82 MINING SERIES AND THE HR50 PRODUCTION IN TWO HOURS COMPARED TO A HYDRAULIC HAMMER VIDEO HERE (just copy and paste) :
https://www.youtube.com/watch?v=1EpaZbRGUag&t=4s
IMAGE 4 SHOWS WHAT SHEARORCE WANTS FOR A WELL USED HR52 - $158,000.00 WHICH AGAIN IS A TOY COMPARED TO THIS HR82 WHICH WEIGHS MORE THAN TWICE WHAT THE HR52 DOES
PERFECT FOR GOLD MINERS FOR THE TOUGHEST PERMAFROST ON SLOPES AND HILLS AND HOLES WHERE YOUR CRAWLERS CAN NOT ACCESS
BUILT JUNE - 2018 IN ITALY BY XCENTRIC RIPPER SERIAL # 18062501 - PUT IN SERVICE IN FALL 2019 - LITTLE USED DUE TO COVID
Note: The paint was touched up but those are the original factory decals on the ripper and the ripper had a re-enforcing plate welded into a known weak spot on both sides of the main ripper shank as preventative maintenance (never cracked as new shank).
The unit is ready to work - needs nothing.
CLEAR TITLE READY TO WORK NOW
SEE IMAGE 4 AND 5 FOR WHAT SHEARFORCE WANTS FOR A COUPLE OF USED HR42s AND HR 52'S - $158,000.00 ? - BOTH OF WHICH ARE WELL USED TOYS COMPARED TO THIS RIPPER
SEE THE PDF FILE INSTRUCTION MANUALS FOR ALL DETAILS - COPY AND PASTE:
https://www.shearforce.ca/wp-content/uploads/XR-MINING-SERIES-Instruction-Manual.pdf
https://bossattachments.com.au/wp-content/uploads/2020/05/boss-au-xcentric-ripper-xr.pdf
https://xcentricripper.com/wp-content/uploads/2019/05/FICHA-RIPPER-XR82_ENG.pdf
http://www.dbflimited.com/Resim/Upload/miningseriesripperenglish1.pdf
The XR82 key features as per Xcentric:
• Suitable for 70t-90t Excavators the XR82 weighs in at 10,000kg (WILL WORK ON 600 OR 650 CLASS WITH SHORT STICK HAS 120 MM MAIN PIN AND 110 MM SECONDARY ON WITH 22.25 INCHES BETWEEN THE EARS)
• 5 times higher production than conventional rock breakers
• A safe and easy alternative to drill and blast options
• New slim body design makes the XR Mining series perfect for trenching applications.
• Minimum noise levels
• Minimum maintenance
• No daily lubrication is required
• Minimum wear parts consumption
• Long-life components and materials
• Less fuel consumption per produced m3/ton
• Less emission per produced m3/ton
• Environmental protection (Bio Lubricants)
• Marine/underwater operation.
• Can be used on standard excavators.
• Increase operator comfort.
• HARDOX® & Strenx construction ensures long-lasting durability in extreme conditions.
• Designed and manufactured in Spain by Xcentric International, only the best materials are
used for excellent quality. Solid, durable, and characterized by the now recognizable clean lines
designed to resist wear and high stresses in the toughest working conditions.
• Extreme compactness and low center of gravity improves balance and drastically reduce the
strain on the excavator's arm, eliminating impact vibrations.Introducing the Xcentric Ripper® hydraulic ripper. A revolution in high-volume excavation and demolition.
After more than 10 years of development in the design and manufacture of the world's most productive, reliable, and technologically advanced hydraulic ripper, Xcentric International has taken the Xcentric Ripper range to a whole new level with the release of the all-new Xcentric Ripper Mining Series.
The Xcentric Ripper® outperforms traditional hydraulic hammers in nearly every type of material, particularly in medium hardness rock with natural fracturing and layers. Using patented Impact Vibration Accumulation Technology, the attachment works with the natural rigidity of the rock, and the vibrations that are produced shake the material to deepen cracks for easier breakup. It is an exceptional tool for frozen ground excavation, demolition, rock excavation, slag recycling, dredging, trenching, underground mining, and even underwater applications.
XR mining series range
• Easy operation with low noise.
• Unbelievable power and versatility.
• Easy on your machine’s pins and bushings.
• Low maintenance.
• Field replaceable ripper teeth.
• Patented impact vibration accumulation technology.
• A safe, easy, and environmentally friendly alternative to drilling and blasting options.One of our customers in the pile and dredging industry was searching for an excavation tool that could be deployed for a three-month project which included the removal of more than 40,000 yards of basalt from shoreline to make way for a new harbor and breakwater for incoming marine traffic.
The superintendent saw a video of the new Xcentric Ripper Mining Series working online and decided to give the new more powerful version of the hydraulic ripper a chance to prove it belonged in their arsenal of excavation tools.
“We have the XR82 model working on one machine and a clamshell bucket for dredging on the other,” he said. “We needed a tool that would work well underwater and the XR82 has performed to our expectations so far. I see it proving valuable as an asset in our equipment fleet and working really well on some of our more specialty projects.”
Mining Series Design Improvements
While the working technology is based on the standard series, the new Mining Series has been reinforced with a remodeled working platform, which delivers a much higher energy impact force to the work tool with a lower frequency. Larger and heavier eccentric gears are now machined from a single billet of steel and precisely designed to allow for equal weight distribution side-to-side and direct impact energy vertically.
The lower pivot arm and housing is reinforced to limit wear where the ripper typically encounters material, and the ripper arm or beak has been remodeled and reinforced with Hardox® steel. The XR Mining Series also has a narrower body profile, making it ideal for tunneling or operating in confined areas.
Designed to increase production, at lower operating costs, and reduced noise levels, the all-new XR Mining Series is a revolution for high-volume rock excavation. Like the regular series that came before it, the Mining Series will be an invaluable tool for frozen ground excavation, rock excavation, quarrying, surface and underground mining, oil sands excavation, utility project installations, pipeline trenching, demolition, slag recycling, dredging, and even underwater applications.
Visit the Xcentric Ripper page:
https://www.shearforce.ca/equipment/xcentric-ripper/ to learn more and watch video of the Xcentric Ripper® Mining Series in actionWATCH THE VIDEOS COPY AND PASTE:
https://youtu.be/C3LLh0fSjk4
https://youtu.be/Z_dNJYRlpyg
https://youtu.be/G3lSGXuxv9s.
NEW COST OVER $300,000.00 TAKE IT FOR $100,000.00 AND WE WILL SHIP QUICKLY = HAVE ON THE JOB NEXT WEEK
THIS UNIT WILL FIT THE FOLLOWING MACHINES WITH A HYDRAULIC PIN GRABBER COUPLER:
Case CX800
Caterpillar 365B L w/ VB Link
Caterpillar 365C w/ Reach Linkage
Caterpillar 375
Caterpillar 375 w/ Mass Linkage
Caterpillar 375 w/ Reach Linkage
Caterpillar 375CL
Caterpillar 385B
Caterpillar 385B
Caterpillar 385B LHitachi Zaxis 650LC-3 BE Arm
Hitachi Zaxis 650LC-3 H Arm
Hitachi Zaxis 670LCH-3 BE Arm
Hitachi Zaxis 670LCH-3 H Arm
Hitachi Zaxis 800 & BE
Hitachi Zaxis 850-3 BE Arm
Hitachi Zaxis 850-3 H Arm
Hitachi Zaxis 850LC-3
Hitachi Zaxis 850-LC-3 BE Arm
Hitachi Zaxis 850-LC-3 H Arm
Hitachi Zaxis 870H-3 BE Arm
Hitachi Zaxis 870H-3 H Arm
Hitachi Zaxis 870LCH-3 BE Arm
Hitachi Zaxis 870LCH-3 H Arm
Hitachi Zaxis 870LCR-3 BE Arm
Hitachi Zaxis 870LCR-3 H Arm
Hitachi Zaxis 870R-3 BE Arm
Hitachi Zaxis 870R-3 H ArmJohn Deere 600CLC & ME
John Deere 650DLC
John Deere 710G Std or Ext Stick
John Deere 710J Std or Ext Stick
John Deere 800 C & ME
John Deere 850D LCKobelco SK850LC
KOMATSU
PC600
PC600LC-6
PC600LC-7
PC600LC-8
PC600LC-8
PC650SE-3
PC650-6
PC750-6
PC750-6
PC750SE-6
PC800LC-7Link-Belt 800 QUANTUM
Link-Belt 8000 QUANTUM
Link-Belt 8000 QUANTUM MASSVolvo EC700B
Volvo EC700C
VOLVO EC800
-
6
COMPLETE SET OF MINT AS NEW LOW HOUR USEAGE ALL COMPLETE WITH AS NEW TEETH HENSLEY ADCO EXTREME DUTY AR 400 STEEL BUCKETS WORTH OVER $50,000.00 USD OR 68,000.00 CDN FROM OUR PC450LC-8 WHICH HAS LESS THAN 7300 HOURS ON IT AND WAS USED MAINLY FOR GRAPPLES AND DEMOLITION PROCESSORS
ALSO A NEW GEITH HYDRAULIC PIN GRABBER COUPLER C/W NEW PINS FITS KOMATSU PC400-PC490 DOOSAN 340 - DAEWOO DX 340 - CATERPILLAR 330D L w/ DB Link
IT HAS 100 MM PINS WITH 16.25 INCHES BETWEEN THE EARS CAN BE MODIFIED OR YOU COULD BUSH DOWN TO 90 MM PINS AND FIT MOST 300 - 350 CLASS EXCAVATORS
GEITH IS THE CADILLAC OF COUPLERS AND THE ONLY ONE WE USE
WE BOUGHT TO PUT ON OUR PC450LC-8 KOMATSU BUT IT ALREADY HAS A PERFECT COUPLER
IT WAS BUILT BY GEITH AND TAGGED FOR DOOSAN 340 BUT TAG EASILY REMOVED
THESE NEW ARE NOW $18,000.00 AND 16 WEEKS OUT
TAKE THIS NEW ONE FOR $10000.00 C/W THE NEW PINS - IT IS OUR NB YARD BUT EASILY SHIPPED FOR NO COST TO YOU IF YOU TAKE THE
SET OF BUCKETS.THIS SET OF HIGH QUALITY STEEL USA BUILT QUALITY BUCKETS CONSIST OF:
1) CLEANUP - BULK LOADING TOUGH MATERIAL SUCH AS CONCRETE - ROCK LIMESTONE - SHALE - SANDSTONE - COAL BUCKET
70 INCHES WIDE BUT DEEP FOR LOADING TRUCKS OVER THE REAR WITH NO SPILLAGE
THIS IS A RARE TOOTHED 4 YARD HEAPED - DEEP CLEANUP - BULK MATERIAL BUCKET WE USED FOR LOADING OUT BULK ROCK AND CONCRETE - 3 BUCKETS TRUCK IS GONE
AND RIPPING SHALE AND LIMESTONE ON OUR PC 450-LC-8 KOMATSU EXCAVATOR
BUCKET IS IN EXCELLENT CONDITION WITH MULTIPLE TEETH FOR RIPPING AND LOADING THAT ARE SPACED SIDE BY SIDE FOR STRENGTH AND CUTTING - LEAVES SMOOTH EXCAVATION BUT DIGS THROUGH CRUSHED CONCRETE AND ROCK WITH EASE
THIS BUCKET COST OVER $20,000.00 USD
TAKE THIS ONE FOR $10,000.00
2) 46 EXTREME DUTY DIGGING BUCKET C/W NEW KOMATUS TEETH - SIDE CUTTERS HOURS OF HARD SURFACING WELDING DONE READY TO WORK TAKE THIS ONE FOR $10,000.00
3) 30 INCH EXTREME DUTY V RIPPER BUCKET C/W ALL NEW TIGER TEETH INSTALLED - BUCKET AS NEW READY TO WORK. TAKE THIS ONE FOR $8000.00
TAKE THE COMPLET SET OF RARE EXTREME DUTY BUCKETS FOR $25,000.00
OR TAKE ALL BUCKETS AND THE GEITH COUPLER FOR $35,000.00 ALL SHIPPED TO YOU - READY TO INSTALL AND WORK NOW NOT WAIT 4 - 6 MONTHS OR NEED SHIPPING FROM US WITH CUSTOMS ETC
WILL SHIP QUICKLY AND WE GET GREAT RATES FROM OUR YARD LANGLEY BC OR IF YOU TAKE ALL - WE WILL PAY THE TRUCKING !!
Whether the task at hand involves general excavation or severe digging, regardless of the material, Hensley Attachments has the right excavator bucket for your application. The world famous, and often imitated, V-Rock bucket originated in this Mansfield, Texas shop. Hensley Attachments also makes a series of traditional excavator buckets equipped with built-in reinforcements that reduce downtime. The General Purpose, Heavy Duty, Severe Duty, and Extreme Service Duty excavator buckets also come with a cast lifting eye, and optional sidecutters.
STANDARD FEATURES ON ALL THESE BUCKETS HAVE:
* Dual taper / dual radius design
* One piece blade (T-1)
* Upper and lower side kick plate (400 BHN)
* Full bottom wear plate (400 BHN)
* Horizontal wear strips (400 BHN)
* One piece side plate
* Strike-off assemblies
* Lip (T-1)
* Formed beam upper structure
* Increased material thicknesses in high wear areas
* Cast heel wear shrouds
* Optional Bimetallic wear resistant productsRECOMMENDED APPLICATIONS:
* Granite
* Ore
* Limestone - Shale -
* Broken Slag
-
7
- 435 hours
- Tractor comes with a loader only. (backhoe & forks are not included.)
-
8
Selling KUBOTA M7060HDCC12 CAB TRACTOR
***Very low hours just 390 total***
Condition: Like new- 70HP KUBOTA DIESEL ENGINE
- 4WD
- CAB WITH HEAT &A/C
- BLUETOOTH RADIO
- 12X12 TRANSMISSION WITH SHUTTLE SHIFT
- TWO REAR REMOTE HYDRAULICS
- 11.2-20 AG TIRES
- 14.9-28 AG TIRES
- Engine replaced at 214 hours by Kubota just because of fuel vandalism.
-Clean titleAlso Includes:
- KUBOTA M26-1 SELF-LEVELLING LOADER
- BE HD4442A0600 PALLET FORKS
-
9
1979 Case 580 2wd Full Size Backhoe Loader
- Diesel 4 cylinder
- New injectors
- Fully enclosed cab
- Front end wheel loader bucket
- Rear digging backhoe excavator bucket
- Good tires
- local in Surrey BCPlease text Jason at 7788092510 to inquire
-
10
Kms
963,000.00 Kms
-
11
Obo 65 mustang coupe c code auto rebuild motor rebuild tranny very solid easy restoration comes with lots of parts extra parts no major rust repair
-
12
1961 Pontiac StratoChief 2 Door Sedan
$19,500 OBO may consider trades.
I have owned the car for over 10 years and it's been in the garage the entire time.
BC registration.
Strong SBC 350 and aluminum powerglide, dual exhaust.
Manual steering, has pump and lines waiting for conversion.
Power 4 wheel drum brakes. Converted from manual to dual reservoir power.
15" Cragar StarWire with brand new rubber.
New interior. Seats rebuilt and recovered. New door panels, package tray, visors(new not installed), kick panels(new not installed) and carpet(new not installed).
Needs headliner.
Have all interior trim ready to go back on.
Floors are solid, redone by previous owner, but not perfect for me. Comes with all 4 replacements.
Frame is good.
Body is solid.
Paint is there, hood, trunk and roof are faded.
-
13
1974 Cadillac
Coupe Deville Beautiful sexy black interior.
Super nice soft factory perfect Condition Black Interior Power seats
Working air conditioning
New exhaust shocks tune up plugs etc....
Ready to drive
Runs and drives firm and fast like hot rod.
Good weather-stripping
windows seal and work well
New trunk trim
Trunk is rhino lined black interiorI put a new radiator, fan and water pump last year
500 cubic inch V8
All stainless trim was professionally polished before it was reinstalled after a $20,000 base clear paint in 2019
$21500
80th ave 200 st langley
Near Langley events centerYou can pick up between 9 am and 330pm most weekdays
weekends possible
Text 7788092510
-
14
1949 Packard 4 door sedan
original straight 8 engine with manual "3 on the tree"
clean restored interior and body
newer spark plugs, wires, brakes & fuel pump
currently licensed & insured as a collector car
-
15
67 Dart, v8 car, very good shape, been sitting along time, good floors couple patches done, new quarter panels installed, front disc brakes rear drum 8 1/4 rear, big bolt all round, console, buckets, bumpers, all seats, door panels, steering wheel and column, heater box, grill, tail panel, steering box, wiper motor and ass'y, radiator, headlights, all glass, mufflers and pipes, a lot of parts, doubles triples, no engine but have transmission.....not a rust bucket. Mopar
-
16
New top
225 slant 6 low miles
-
17
1927 Ford tall T as a Ford ranger, four-cylinder five-speed transmission disc, brakes upfront whatever you wish to put in the rear sits on a Montecarlo frame, new ball joints, upper and lower tie rod ends frame has been Sandblasted Epoxy primer, painted the body, the same thing
-
18
$85500 US dollars
$116000 Canadian
427/390 period correct GM block
Matching numbers 4 spd transmission
3.36 rear end
Air conditioning
Power windows
Power steering
Power brakes
Leather interior
Knock offs
Side pipes
It’s Been in Canada it’s whole Life as far as I know, your welcome to try and order GM Canada docs from vintage services
Runs excellent
Original Nassau blue color exterior and black interior
Located in Richmond BC Canada
Please do not reply unless seriously interested
There is no tax or duty for any US buyer since the car was built in USA
Not interested in trades or your low ball offers
Thanks
-
19
90% Restored. Lots of new upgrades and performance. QA1 steering, Wildwood disc brakes, big block components installed for big block upgrade, line lock and much more. Serious inquiries only
-
20
1951 Ford F1 pickup. Fully restored all stock except for 5 speed transmission. Collector status
-
21
Good overall condition, runs great. Fresh battery, spark plugs and oil change. Completely stock besides handlebar risers. These engines will regularly do 20k KM+
-2900km
-146" track
-Has reverse
-
22
NOW OPEN in Langley. 27491 Fraser Hwy, Aldergrove!
Unit is located at FOT Langley BC. Shipping daily to your area, please call or message for details!
All Prices Plus Applicable Taxes.
PRE-OWNED 2017 83in Wide x 12ft CargoPro All-Aluminum ATV Trailer by Alcom
- All-Aluminum construction
- 24in O C Floor Crossmembers
- 2in x 3in Subframe Tubing
- 3500lb Wishbone Style Coupler w 2in Ball
- Dexter Leaf Spring Axle
- Custom Angle Side Rails for Low Profile Side Loading
- 1,200lb Wheel Jack
- 5 4in Pressure Treated Wood Decking
- Rear and Front Stowing Removable 8ft Ramps
- Recessed LED Marker Lights
- Limited 4 Year Warranty
SPECS:
- Deck WxL: 83in x 12ft
- Overall WxL: 102in x 16ft
- Deck Height: 23in
- Hitch Height: 19in
- Axle: (1) 3,500 lb
- Wheels: 15in Silver Mod
- Tires: 205 75R15 Radial
- Curb Weight: 410 lbs
- GVWR: 2,990 lbs
FOT works diligently to ensure accurate information, but in some instances pictures and or descriptions may not be exact. Factory Outlet Trailers is not responsible for errors. Please inquire for complete details.
VisVisit our website, www.fot.ca! Over 900 trailers in stock and new inventory every day! Note: Not all inventory in all locations. Please call to inquire. **Call today, and let one of our Trailer Professionals find the right trailer for you** We have the best selection of trailers in stock and industry best turn around times on custom orders. We stock a full line of Cargo, Dump, Utility, Flat Decks, Enclosed, Gooseneck, Pintle Hitch, Sled Decks, Snowmobile, ATV, SXS, Car Hauler, Toy Haulers, and can custom order anything to fit your needs! We have 8 locations across Western Canada. *Delivery available to almost anywhere after purchase* **Delivery Charges May Apply**
-
23
See Dealer Website for Details. 2023 CFMOTO UFORCE 1000 EPS LX
-
24
See Dealer Website for Details. 2023 CFMOTO ZFORCE 950 HO SPORT
-
25
See Dealer Website for Details. 2023 CFMOTO ZFORCE 950 HO EX
-
26
For ARCTIC CAT Specific Promotions, Financing Rates, Trade In Credits & Current Rebates please visit the Promotions page on our website.
WE SHIP EVERYWHERE ~ EASY FINANCING OPTIONS ~ WE TAKE TRADES
For over a century, we've embodied the essence of the rock 'n roll moto lifestyle. Since 2003, we've been more than a dealership; we're a haven for riders who demand the best. With a track record of excellence and a passion for all things motorcycle, we've become the quintessential destination for enthusiasts seeking top-notch rides and an unmatched community of fellow riders.
As Steve McQueen famously said, "Racing is life. Anything before or after is just waiting." This philosophy echoes through our veins as we celebrate the moto lifestyle and pay tribute to legendary figures who've defined the road. Our showroom isn't just about motorcycles; it's a sanctuary for rebels who ride to their own beat, where the thrill of adventure intertwines with the spirit of rock 'n roll.
Welcome to a world where engines roar, and the road stretches as far as the music takes you. We don't just sell motorcycles; we ignite a culture, foster connections, and ensure every ride is an anthem of freedom. Let's ride together, embracing the legacy while crafting our own stories as modern-day rebels.
International Motorsports Motorcycle Company
$695 Freight & Setup + $395 Documentation Fee Engine Type: 200, 4-Stroke Displacement: 192 cc Bore x Stroke: 70 mm x 50 mm Cylinders: 1 Engine Cooling: Air Brake Type: Hydraulic Brake/ Disc on Driveshaft Drive Clutch: Arctic 5.25 in. Diameter (RPM Sensing) Driven Clutch: 6.75 in. Diameter Arctic (Roller Cam) Front Suspension: Arctic Wishbone Suspension (AWS) Rear Suspension: Slide-Rail, Adjustable Torsion Spring, Coil-Over Rear Shock Ski Stance: 29.5 - 31.5 in. Adjustable Track Type: Cobra Track Dimensions: W X L: 10 in. x 93 in. Headlight: Halogen 1-Bulb Fuel Capacity: 2.2 gal. Windshield: 4-in. Low Height Color: Black/Medium Green Electric Start: Turnkey Electric Start Hand & Thumb Warmers: Hand Warmers
-
27
PRE-ORDER YOURS NOW!!!! Ski Type: Traverse® Dry Weight: Rear: 117 lb. (53 kg)
-
28
See Dealer Website for Details. 2023 CFMOTO ZFORCE 950 TRAIL
-
29
See Dealer Website for Details. 2023 CFMOTO UFORCE 1000 EPS XL CREW
-
30
See Dealer Website for Details. 2023 CFMOTO UFORCE 600 Carey Price Edition
-
31
Obo 65 mustang coupe c code auto rebuild motor rebuild tranny very solid easy restoration comes with lots of parts extra parts no major rust repair
-
32
1974 Corvette Stingray
Price reduced to $15,000!Car is in BC, if you are in a different province get it shipped to you by an insured transport company at a reasonable extra cost.
Get yourself a summer ride, call today!
Here is just some of the work done. The receipt binder that's included with purchase will outline the exact items and part numbers. All easy to get at your local parts store.
Tires, rims, headers & side pipes and exhaust that throw flames!
Brake lines, master & brake booster, disc brakes, limited slip rear end & gears, axle tubes, suspension, bushings, bearings, shocks, ball joints, all upgraded and much more... $$$
Painted car. polished/chrome SBC 350 engine. Aluminum heads, fans & radiator, less than 10,000 kilometers on engine! 77,500 miles on car odometer.
Great driver/show and shine car!!!
Rebuilt 4 speed manual transmission, with new clutch, through-out bearing, pressure plate all last year.
Roof chopped; fenders flared, very nice body mods that were done over 40 years ago. Lowering blocks added creating the fender clearance. Vinyl wrapped T-Tops & hood. Blue LED lights. Built as a great daily driver. Most of the money spent is on the mechanics.
Serious buyers only please, no test pilots.
You can not build it for this!
Price reduced to $15,000! Get yourself a summer ride - Call today!
-
33
84 Firebird, six cylinder sitting for years runs needs new fuel
-
34
1974 Cadillac
Coupe Deville Beautiful sexy black interior.
Super nice soft factory perfect Condition Black Interior Power seats
Working air conditioning
New exhaust shocks tune up plugs etc....
Ready to drive
Runs and drives firm and fast like hot rod.
Good weather-stripping
windows seal and work well
New trunk trim
Trunk is rhino lined black interiorI put a new radiator, fan and water pump last year
500 cubic inch V8
All stainless trim was professionally polished before it was reinstalled after a $20,000 base clear paint in 2019
$21500
80th ave 200 st langley
Near Langley events centerYou can pick up between 9 am and 330pm most weekdays
weekends possible
Text 7788092510
-
35
1933 Chevy stepside sits on a 1979 Chevy half ton frame over plays, ball joints, tie rod ends, CenturyLink brake shoes, brake drums, wheel, cylinders, calipers, steel and rubber. Lions universal joints record the radiator 454 came stock in the frame. 400 transmission, new wiring, harness, lokar Shifter new rubber all the way around new fuel tank, new trailer hitch new tailgate
-
36
67 Dart, v8 car, very good shape, been sitting along time, good floors couple patches done, new quarter panels installed, front disc brakes rear drum 8 1/4 rear, big bolt all round, console, buckets, bumpers, all seats, door panels, steering wheel and column, heater box, grill, tail panel, steering box, wiper motor and ass'y, radiator, headlights, all glass, mufflers and pipes, a lot of parts, doubles triples, no engine but have transmission.....not a rust bucket. Mopar
-
37
Wanted
Unrestored 1970 or 1971 Cuda or Barracuda
Canadian car only with some registration.
The more complete the better.
-
38
$85500 US dollars
$116000 Canadian
427/390 period correct GM block
Matching numbers 4 spd transmission
3.36 rear end
Air conditioning
Power windows
Power steering
Power brakes
Leather interior
Knock offs
Side pipes
It’s Been in Canada it’s whole Life as far as I know, your welcome to try and order GM Canada docs from vintage services
Runs excellent
Original Nassau blue color exterior and black interior
Located in Richmond BC Canada
Please do not reply unless seriously interested
There is no tax or duty for any US buyer since the car was built in USA
Not interested in trades or your low ball offers
Thanks
-
39
90% Restored. Lots of new upgrades and performance. QA1 steering, Wildwood disc brakes, big block components installed for big block upgrade, line lock and much more. Serious inquiries only
-
40
91 GMC Sierra ST. 1500 Step side
5.7 350 engine, standard transmission 5 speed, new front and rear brakes, new battery. Interior and seats in good condition.
Have used set of original P275-60 series tires and full set of snow tires all round.Paint needs some TLC to restore this rare beauty.
-
41
NOW OPEN in Langley. 27491 Fraser Hwy, Aldergrove!
Unit is located at FOT Langley. Shipping daily to your area, please call or message for details!
ALL PRICES PLUS APPLICABLE TAXES
NEW Venture Single Axle Aluminum Boat Trailer
- Fits 12-14ft Boat
- Plug and Play Lights
- Aluminum Construction
- Aluminum Diamond Plate Fenders
- HD Winch Strap
- Balanced Radial Tires
- Super Lube Spindles
- Galvanized Hardware, U-Bolts, Winch Stand, Axles and Tongue
- Adjustable Bunks
- 4.80x 12Tires
SPECS:
- Overall Length: 15ft
- Overall Width: 60in
- Width Between Fenders: 42in
- Bow Eye to Transom Min Max: 8ft2inft 12ft8in
- GVWR: 1,230 lbs
- Capacity: 1,025 lbs
- Curb Weight: 205 lbs
MFG Model: VAB-1025
FOT works diligently to ensure accurate information, but in some instances pictures and or descriptions may not be exact. Factory Outlet Trailers is not responsible for errors. Please inquire for complete details.
VisVisit our website, www.fot.ca! Over 900 trailers in stock and new inventory every day! Note: Not all inventory in all locations. Please call to inquire. **Call today, and let one of our Trailer Professionals find the right trailer for you** We have the best selection of trailers in stock and industry best turn around times on custom orders. We stock a full line of Cargo, Dump, Utility, Flat Decks, Enclosed, Gooseneck, Pintle Hitch, Sled Decks, Snowmobile, ATV, SXS, Car Hauler, Toy Haulers, and can custom order anything to fit your needs! We have 8 locations across Western Canada. *Delivery available to almost anywhere after purchase* **Delivery Charges May Apply**
-
42
We have a good selection of used, fresh water manifolds and exhaust systems. Great prices on new manifolds, can be shipped right to your door! Also available in aluminum. We have a huge inventory of new and used parts for all your boating needs! 250-851-0084
-
43
FiberForm 1977 – 28ft – 5 Berth with Command Deck
Out of Water August 2023 with full survey
2 Volvo Penta 5.7 liter inboard gas engines to Volvo Penta Sterndrives. Vessel also equipped with one spare Volvo Penta Sterndrive
4 Brand New Batteries
New counter top, gas stove, & sink
New LED strip lighting throughout vessel
New carpeting, New full rebuilt upholstery from scratch
New USB power outlet
New fire extinguishers
New Engine Compartment HeaterFridge
Recent electrical work to bring up to code, including circuit breaker.
Recent renovations of kitchen, washroom, new carpeting new upholstery built from scratch, new engine heater.
Depth finder/ GPS / Radio with CD player, UHF radio
-
44
Financing available!
‘82 Aquastar
‘92 motor 85 force mariner
Brand new beam top
Decent trailer
16’ boat
18’ trailer
Please message 778-981-1612 or call 250-851-0084 with your name and number and we will get back to you as soon as we can !
Kamloops BC
-
45
NEW AND USED HYDRAULIC POWER TRIM UNITS, SUCH AS 14035A3 OR 18-2421. WE HAVE MANY OTHERS AS WELL! WE ALSO HAVE NEW ELECTRIC MOTORS FOR YOUR OLD POWER TRIM UNIT. PLUS WE HAVE A HUGE INVENTORY OF NEW AND USED PARTS, INCLUDING LOTS OF OLDER, OBSOLETE, HARD TO FIND PARTS FOR ALL YOUR BOATING NEEDS. 250-851-0084
-
46
Discover the perfect partner for your kayaking adventures with our lightweight and durable kayak paddle. Delivery & Pickup available.
- Dimensions: 230 x 9 x 3.5 cm
- Lightweight and durable
- Can be disassembled for easier storage and transport
- Ergonomic grip for better maneuverability
-Price before taxesMore info:
https://www.adventure-outdoors.ca/store/Kayak-Paddle-p561993152
-
47
NOW OPEN in Langley. 27491 Fraser Hwy, Aldergrove!
Unit is located at FOT Langley BC. Shipping daily to your area, please call or message for details!
All Prices Plus Applicable Taxes
NEW Aluminum Personal Watercraft Trailer from Venture
- Fits 2 3 Seater PWC
- Plug and Play Lights
- Aluminum Diamond Plate Fenders
- Tongue Jack
- Adjustable Bunks
- Heavy Duty Winch Straps
- Balanced Radial Tires
- Galvanized Hardware, U-Bolts, Winch Stand and Axles
- Overall Width: 60in
- Width Between Fenders: 42in
- Tire Size: 4.8x12 LRC
- Overall Length14ft3in
- Capacity: 1,200 lbs
- Curb Weight: 270 lbs
- GVWR: 1,430 lbs
FOT works diligently to ensure accurate information, but in some instances pictures and or descriptions may not be exact. Factory Outlet Trailers is not responsible for errors. Please inquire for complete details.
VisVisit our website, www.fot.ca! Over 900 trailers in stock and new inventory every day! Note: Not all inventory in all locations. Please call to inquire. **Call today, and let one of our Trailer Professionals find the right trailer for you** We have the best selection of trailers in stock and industry best turn around times on custom orders. We stock a full line of Cargo, Dump, Utility, Flat Decks, Enclosed, Gooseneck, Pintle Hitch, Sled Decks, Snowmobile, ATV, SXS, Car Hauler, Toy Haulers, and can custom order anything to fit your needs! We have 8 locations across Western Canada. *Delivery available to almost anywhere after purchase* **Delivery Charges May Apply**
-
48
NOW OPEN in Langley. 27491 Fraser Hwy, Aldergrove!
Unit is located at FOT Langley BC. Shipping daily to your area, please call or message for details!
All Prices Plus Applicable Taxes
NEW Commander 8800 Boat Trailer from Venture Trailers
- Fits 27-29ft Boat
- Vortex Hubs
- Aluminum Sport Wheels
- Target Bunks
- 2,000lb Tongue Jack
- Galvanized Hardware
- Aluminum Diamond-Plate Fenders
- Torsion Axles
- ST225 75R15 Radial Tires
- LED Lights
- Load Guides
- Composite Brake Lines
- Disk Brakes
- Aluminum Crossmembers
- Load Capacity: 8,800 lbs
- Bow Eye to Transom Min Max: 21ft6in 26ft1in
- Coupler Size: 2 5 16in
- Overall Length: 30ft 1in
- Curb Weight: 1,360 lbs
- GVWR: 10,160 lbs
FOT works diligently to ensure accurate information, but in some instances pictures and or descriptions may not be exact. Factory Outlet Trailers is not responsible for errors. Please inquire for complete details.
VisVisit our website, www.fot.ca! Over 900 trailers in stock and new inventory every day! Note: Not all inventory in all locations. Please call to inquire. **Call today, and let one of our Trailer Professionals find the right trailer for you** We have the best selection of trailers in stock and industry best turn around times on custom orders. We stock a full line of Cargo, Dump, Utility, Flat Decks, Enclosed, Gooseneck, Pintle Hitch, Sled Decks, Snowmobile, ATV, SXS, Car Hauler, Toy Haulers, and can custom order anything to fit your needs! We have 8 locations across Western Canada. *Delivery available to almost anywhere after purchase* **Delivery Charges May Apply**
-
49
This kayak is not being used by our family so we are looking to sell it to get back the used space it is currently taking up. Its in great shape but used nonetheless. I,m willing to deliver it to you also if that makes things easier.
-
50
1995-350 Mercruiser Engine , 1995 Bravo 2 Leg. 1100 Original Hours. V-Berth & small galley with sink, fridge & table. Shore power, teak swim grid & Bimini. Classic, with heavily laid up fiberglass.