Cars & vehicles with in Canada, British Columbia, Vancouver, Delta/Surrey/Langley.
-
1
1974 DeKeer Fraser 30 sailboat, registered with Transport Canada in BC.
Going to work outside Canada for three years, so I have to let go my sailboat project.
We cleaned entirely the interior, it’s empty, ready to be refurbished as you desired.
Keel was inspected and repainted, and all underwater seacocks replaces with brass valves.
It has a Diesel inboard that need to be rewired, hooked up to water line and exhaust.
Actually on a dock in Vancouver area, can stay there ($400/mo) or tow away.
-
2
Please contact owner for rental details.
You can apply to fly at: https://flightclub.ca/listing/1664997849074x447970875149123600
-
3
You can apply to fly at:
https://flightclub.ca/listing/1659397624357x896481558133997600
-
4
2022 evolution golf cart
4 passenger street legal,
Lithium battery. 9” touch screen, speedometer, Bluetooth, back up camera, seat belts, turn signals. LED headlights and tail lights.
Located Keremeos BC - delivery available
Please contact
6043198105
-
5
Call Andy 604-807-3532
You can apply to fly at: https://flightclub.ca/listing/1652206351481x205958752163594240
-
6
Beautiful Yellow Tricycle for just $500!
Assembled already!
*Steel Frame
*The weight of the rider is up to 300 lbs/150 kg.
*Brakes (front and rear)
*Adjustable for riders of all sizes
*The bell
*Large Rear Basket
-
7
For your safety:
* a check ride (with an instructor, in this plane) is required.
* you must have sufficient (5 hours) experience with retractable landing gear and constant speed props.You can apply to fly at: https://flightclub.ca/listing/1605650084019x290634906713456640
-
8
We have a contract that must be signed before flight. All pilots require checkrides completed within the past year on aircraft type. Will get you the gate codes and door codes to gain entry into the club.
Access to club house is part of the package. $40 monthly membership fee to cover insurance, complementary headsets, beverages, and club house maintenance and up-keep costs.
Block time:
Every block includes the cost of the instructor needed for the checkout flight.
20 hour block includes a club t-shirt.
30 hour block includes a club hoodie.
40 hour block includes a club hat.
50 hour block includes the t-shirt, hoodie and hat!
Hours can be transferred amongst aircraft, provided you are i) checked out on that aircraft, and ii) at a ratio based on the listed hourly rate of the aircraft.You can apply to fly at: https://flightclub.ca/listing/1626362142684x137878801642422270
-
9
You can apply to fly at: https://flightclub.ca/listing/1664253941975x735506818375090200
-
10
Rostra school bus student detection system and instructions. Box of stuff, looks unused. We got it in an auction lot with a bunch of other stuff and have no use for it. If you do, $20 and it's yours! Pick up in Brookswood (South Langley) 38th Ave/204A
-
11
Sell it all - Junk Cash For Top Dollar! No Scams or Hassles. Get Paid Today!
If it's not broken, don't fix it! We pay
We buy junk cash for top dollar in Canada. help the environment by recycling
Cash on the spot
Call 604 782 6153
Visit: https://buff.ly/3sjoJTc to get a quick quote
12161 100 Avenue Surrey, BC V3V 2W7 Canada
-
12
We are the leading scrap metal removal and auto body tow service in our city, we do full towing for trucks, cars, and vans for Vancouver, BC.
We specialize in the removal and recovery of cars, trucks
CAR Towing and Removals
We offer reliable, safe, and fast vehicle removal for Scrap Cars. Call us today!
Visit: http://www.towandscrapmycar.ca/ to get a quick quote
Cash on the spot
Call 604 782 6153
-
13
We are one of the leading scrap car removal and towing companies in Vancouver Canada. We provide junk car removal, roadside assistance, emergency towing, and more.
Our service locations include; Vancouver, Surrey, Delta, New Westminster, Burnaby, Richmond, Maple Ridge, Langley, Fort Langley, Abbotsford, Chilliwack, Coquitlam, Port Coquitlam, North Vancouver, West Vancouver, Squamish.
12161 100 Avenue Surrey, BC V3V 2W7 Canada
(604) 782-6153
http://towandscrapmycar.ca/
info@towandscrapmycar.ca
-
14
4 Nitto SN2 winter tires on aluminium rims. Barely used. Still have about 6.7mm of tread ( 8mm brand new) so almost new.
These tires are unbelievably reliable on ice, snow, and slush.
Originally on my BMW 6 Series(that I seldomly drove in winter) that I just sold.
Will fit most BMW 4-5-6-8-M5-M6-Z8-i4 series, and many more (https://www.wheel-size.com/tire/iso-metric-245-45-R-18/)
Here is the tire info:
The Nitto NT-SN2 Winter is a studless winter tire. It provides excellent handling and traction in all weather environments including snow, slush and ice. The NT-SN2 Winter tire's unique tread design offers superior bite in snowy and icy conditions.
The 245/45R18 Nitto NT-SN2 Winter has a diameter of 26.93", a width of 9.6", mounts on a 18" rim and has 771 revolutions per mile. It has a max load of 1565 lbs, has a maximum air pressure of 44 psi, a tread depth of 12.7/32" and should be used on a rim width of 7.5-9".
Engineered with an advanced tread compound that maintains its flexibility at lower temperatures that ensures better contact with the road in cold, icy conditions.
Nitto Tire’s studless technology, along with advanced sipping and block edge design, combine for a safer driving experience during the worst of winter conditions.
The result is a tire that provides peace of mind — even when winter doesn’t.
-
15
QUESTIONS? TEXT US - 604.210.4572!!! NOW is the Best time to Buy a NEW motorcycle - Come See Why WeAre #1 - Sales - Parts - Service - We are a Certified Repair and Performance Centre - Easy Financing - InstantApprovals - Low Interest Rates & Payments - We Accept trades! Check ahead for availability, inventory, andlocation [+$995 pdi, $199 doc and taxes] Engine Type: 4 stroke, single overhead cam, air-oil cooled, parallel twin Displacement: 648 cc Cooling: Air-Oil cooled Compression Ratio: 9.5:1 Fuel System: Fuel Injection, digital spark ignition - TCI Ignition: Digital spark ignition - TCI Transmission: 6 speed gearbox, assisted slipper clutch. Front Suspension: 41 mm front fork Rear Suspension: Twin coil-over shocks, gas charged with piggy-back reservoirs, 5 stage pre-load adj. Front Brakes: 320 mm disc, Bosch Dual Channel ABS, twin piston callipers By Brembo Rear Brakes: 240 mm disc, Bosch Dual Channel ABS Front Tire: Pirelli Phantom Sportcomp 100/90 Rear Tire: Pirelli Phantom Sportcomp 130/70 Wheelbase: 1398 mm Seat Height: 793 mm Rake: 24 deg. Trail: 105 mm Fuel Capacity: 12.5 L Dry Weight: 198 kg (no fuel) Colors: Mister Clean
-
16
QUESTIONS? TEXT US - 604.210.4572!!! NOW is the Best time to Buy a NEW motorcycle - Come See Why WeAre #1 - Sales - Parts - Service - We are a Certified Repair and Performance Centre - Easy Financing - InstantApprovals - Low Interest Rates & Payments - We Accept trades! Check ahead for availability, inventory, andlocation [+$995 pdi, $199 doc and taxes] Engine Type: 4 stroke, single overhead cam, air-oil cooled, parallel twin Displacement: 648 cc Cooling: Air-Oil cooled Compression Ratio: 9.5:1 Fuel System: Fuel Injection, digital spark ignition - TCI Ignition: Digital spark ignition - TCI Transmission: 6 speed gearbox, assisted slipper clutch. Front Suspension: 41 mm front fork Rear Suspension: Twin coil-over shocks, gas charged with piggy-back reservoirs, 5 stage pre-load adj. Front Brakes: 320 mm disc, Bosch Dual Channel ABS, twin piston callipers By Brembo Rear Brakes: 240 mm disc, Bosch Dual Channel ABS Front Tire: Pirelli Phantom Sportcomp 100/90 Rear Tire: Pirelli Phantom Sportcomp 130/70 Wheelbase: 1398 mm Seat Height: 793 mm Rake: 24 deg. Trail: 105 mm Fuel Capacity: 12.5 L Dry Weight: 198 kg (no fuel) Colors: Black Magic
-
17
Harley Davidson 2013 Softail Service Manual includes 2013 Softail Electrical Diagnostic Manual
Both New - selling as pair
$240.00
text 604-763-3764
-
18
Snowbike built for snow specific use only, never touched dirt. Crazy fun and capable bike, I'm selling as I have too many bikes at the moment..
Approximately 50 hours on the bike and track.
Mountain Horse ST 120 2016
PR2 Vortex ECU snowmap
Wiseco Racers Elite 14:1 Piston
Daniel Crower racing cam
FMF titanium megabomb header with dual titanium exhaust
C3 Thermostat
PST Engine Blanket
Riders Edge custom forks converted from air to spring (amazing for the backcountry)
Snow specific air intake.
Rekluse Clutch comes with but I swapped back to stock.
New TS spindle installedThe bike currently lives at my shop in Port Kells (Surrey), however I travel regularly up the Sea-to-Sky.
-
19
QUESTIONS? TEXT US!!! NOW is the Best time to Buy a NEW motorcycle - Come See Why We Are #1 - Sales - Parts - Service - We are a Certified Repair and Performance Centre - Easy Financing - Instant Approvals - Low Interest Rates & Payments - We Accept trades! Check ahead for availability, inventory, and location [+$995 pdi, $199 doc and taxes] Engine Type: 4 stroke, single overhead cam, air-oil cooled, parallel twin Displacement: 648 cc Cooling: Air-Oil cooled Compression Ratio: 9.5:1 Fuel System: Fuel Injection, digital spark ignition - TCI Ignition: Digital spark ignition - TCI Transmission: 6 speed gearbox, assisted slipper clutch. Front Suspension: 41 mm front fork Rear Suspension: Twin coil-over shocks, gas charged with piggy-back reservoirs, 5 stage pre-load adj. Front Brakes: 320 mm disc, Bosch Dual Channel ABS, twin piston callipers By Brembo Rear Brakes: 240 mm disc, Bosch Dual Channel ABS, twin piston callipers By Brembo Front Tire: Pirelli Phantom Sportcomp 100/90 Rear Tire: Pirelli Phantom Sportcomp 130/70 Wheelbase: 1400 mm Seat Height: 804 mm Rake: 24 deg. Trail: 106 mm Fuel Capacity: 13.7 L Dry Weight: 202 kg (no fuel) Colors: Glitter and Dust
-
20
QUESTIONS? TEXT US!!! NOW is the Best time to Buy a NEW motorcycle - Come See Why We Are #1 - Sales - Parts - Service - We are a Certified Repair and Performance Centre - Easy Financing - Instant Approvals - Low Interest Rates & Payments - We Accept trades! Check ahead for availability, inventory, and location [+$1295 pdi, $199 doc and taxes] Engine Type: Aprilia longitudinal 65° V-4 cylinder, 4-stroke Displacement: 999.6 cc Bore and Stroke: 78 x 52.3 mm Cooling: Liquid Compression Ratio: 13.6:1 Fuel System: 4 Marelli 48-mm throttle bodies with 8 injectors and latest generation Ride-By-Wire engine management Ignition: Magneti Marelli digital electronic ignition system Transmission: 6-speed cassette type gearbox Front Suspension: Sachs Fork with 43 mm Ø stanchion Rear Suspension: Double braced aluminium swingarm; mixed low thickness and sheet casting technology Front Brakes: Dual 320-mm diameter floating stainless steel disc with lightweight stainless steel rotor Rear Brakes: 220 mm diameter disc; Brembo calliper with two Ø 32 mm separate pistons Front Tire: Radial tubeless. 120/70 ZR 17 Rear Tire: Radial tubeless. 200/55 ZR 17 Fuel Capacity: 18.5 L (4-L reserve included) Dry Weight: 180 kg Colors: Nero Arrabbiata, Grigio Rivazza
-
21
Bike is in great condition, no issues.
Comes with stock pipe, brand new rear tire, stock shield, gloves and helmet optional.
Great beginner bike or someone who likes a safe ride. Call or text for details
300cc Ninja Kawasaki Motorcycle
-
22
2009 Road. King
-
23
2018 Harley Davidson Sportster XL 1200C … Custom Soft Tail
This Bike has less than 100 km on it … spent most of its life on the Dealership Showroom Floor. This bike was already customized to the max at the factory and then I went ahead and bought a bunch of cool accessories and had the dealer install them. By the time I took the bike from the dealership (over a year later) I had $32,947.30 into it.
I took some riding lessons on a small Honda that I’d bought just to learn on. Realized then that I was too small a person to handle a Harley. Put the Harley in a heated storage unit. My friends finally convinced me to sell the bike, so that’s where we are now.
My loss is your lucky day. This is essentially a brand new 2018 Harley with NO MILEAGE and totally tricked out. Never been dropped or in an accident.
Come look, touch, and fire it up … NO you can’t Test Ride it. I’ve never driven it but the dealership mechanic has. It rides like a Harley ;o)
$24,164.91 is a fair asking price considering everything I’ve got in it. A friend of mine, who is a Harley Guy, went over both the Bike and the Books and came up with this price so I think it’s fair. Up to you to convince me (and him) otherwise.
Contact Zara @ -------
-
24
NEW PRICES****LOOKING FOR SERIOUS BUYERS ONLY PLEASE*** all rebuilt
2016- CROSSCOUNTRY 1700CC 26000KMS $11K
2008 HAMMER JACKPOT 1700CC 4KMS $10.5K
2011 VEGAS 8 BALL "ZACK NESS" 98 OF 100 MADE
very rare 11kms $10.5k
2013 boardwalk 1700cc 6kms $10.5k
parts bikes complete 11 crosscountry 49kms good motor in frame wheels tires tank r-fender controls no frontend nothing on front $4000
06 hammer jackpot 100in complete SOLD
call for detail if serious 604-828-2084
cloverdale bc
-
25
2015 SEM 656D Wheel loader
Machine is in excellent condition. Tires like new. Machine only has 128 original hours
3.5 yard digging bucket.
-
26
OR (15,400-26,400 lb)
TAKE THIS UNIT FOR $10000.00
FRANK 604-476-7777
FROM THE EPIROC WEBSITE:
HYDRAULIC BREAKERS FOR DAY-TO-DAY JOBS
Offering a good price-performance ratio, our EC breakers not only offer the reliability that you expect of an Epiroc breaker, but also many of the well-known features and benefits. Our EC hydraulic hammers are your durable and reliable choice for day-to-day construction, gardening, landscaping and renovation, as well as demolition, trenching, earthwork and quarrying jobs.HYBRID TECHNOLOGY
Integrated nitrogen piston accumulator for constantly high impact energy, safe start-up and smooth operation.VIBROSILENCED PLUS
Non-metallic suspension arrangements to isolate percussion mechanism from breaker box and sealing of all openingsfor lower noise and vibration levels.ADVANCED CONTROL TECHNOLOGY
The integrated control valve optimizes efficiency; the EnergyRecovery system increases operating efficiency and lowers vibrations.MONOBLOCK DESIGN
Combined cylinder & tool holder section eliminating the need for tie rods for higher reliability; replaceable piston liner for cost-effective repairs.PERCUSSION CHAMBER VENTILATION
The built-in check valve reduces dust intake into the tool guiding area and the percussion chamber.STROKECONTROL VALVE
The combined stroke length and start-up mode switching valve enables the operator to adjust the breaker operation mode to the application for optimum performance.CONTILUBE™ II
Optional self-bleeding automatic lubrication device for optimized grease consumption and continuous lubrication.FIELD REPLACEABLE BUSHING
Full length floating tool bushing for quick exchange with standard hand tools.Specifications are subject to change without prior notice.
Similar models may be shown in addition to the featured model. Equipment may be shown with options.
Specifications
General
Year 2020
Manufacturer EPIROC Model EC80
Condition New
Quantity 1
TECHNICAL DATATechnical specs - EC 80 Epiroc
Weight 370 kg
No. of Blows 530-1000 1/min
Carrying device 5-12 t
Total length 1097 mm
Tool Ø 80 mm
Oil flow 60-90 l/min
Operating pressure 120-150 bar
Impact energy ###
EC 80 Epiroc - Special equipmentCentral lubrication
Silenced
-
27
C/W DEMOLITION GUARDING AND FULL HYDRAULICS
THIS MACHINE WITH ALL GUARDING - HYDRAULICS AND PIN GRABBER COUPLER WOULD COST OVER $450,000.00 TO REPLACE AND WITH THE FOLLOWING HAMMER $600,000.00
TAKE MACHINE ONLY FOR $165,000.00 AND / OR ADD THE FOLLOWING:
ATLAS COPCO HB3100 HYDRAULIC HAMMER
THIS IS A EXCELLENT CONDITION HARD HITTING HAMMER MOUNTED ON THE EC305CL VOLVO EXCAVATOR (88,000 LB) MACHINE
COME TRY IT OUT - WILL POST VIDEO OF IT WORKING SHORTLY OR RENT IT WITH OR WITHOUT OPERATOR
IT COMES COMPLETE WITH AUTO GREASER AND 100 HIGH-QUALITY BIO GREASE EPIROC PLASTIC FACTORY GREASE CARTRIDGES
TAKE IT FOR $50,000.00
OR TAKE THE FULLY SERVICED LOW HOUR VOLVO EC305CL C/W YOUR CHOICE OF DIGGING BUCKET AND THE HAMMER FOR $200,000.00
NOTE: THIS MACHINE WITH THE HAMMER AS PER THE BC ROADBUILDER GUIDE RENTS FOR $350.00 PER HR.
WILL TAKE COLLECTOR - MUSCLE CAR - MOTORHOME AS PART TRADE
LOCATED LANGLEY BC
THE FOLLOWING IS AVAILABLE TO PURCHASE OR RENT WITH THIS MACHINE:
1) LARGE 24000 FT LB CAT PLATE COMPACTOR
2)WRIST TWIST 66 OR 74 INCH WRIST TWIST CLEANUP BUCKET
3)20 INCH TRENCHING BUCKET
4)30 INCH EXTREME DUTY TRENCHING BUCKET
5)48 INCH EXTREME DUTY DIGGING BUCKET
6)30,000 FT LB ROCKTEC TERMINATOR 30,000 FT LB DROP HAMMER FOR PULVERIZING LARGE BOULDERS - CONCRETE SLABS ETC
7)TRAMAC MT55 360 DEGREE ROTATION CONCRETE PROCESSOR - SHEAR
8)VIBRA-RAM 360 DEGREE ROTATION ASB800D DEMOLITION SORTING GRAPPLE
9) 66 INCH CLEANUP BUCKET
10) 56 INCH HENSLEY 2.56 YARD EXTREME DUTY 6 TOOTH DIGGING BUCKETZero Tail Swing Custom Demolition Guard Package As New 2016 JRB Hydraulic Pin Grabber Coupler
88,000 lb Machine With 80 Percent Plus Long and Wide Under Carriage
Fully Plumbed 3 Auxilary Hydraulic Circuits Case Drain - Full 7000 Hr Service Completed
Work Ready Fully Serviced Put It To Work Tomorrow
For Sale $165,000.00
CLEAR TITLE - LEASING AVAILABLE OAC - QUICK SAME DAY OR NEXT DAY APPROVALS
Frank 604-476-7777
Technical specifications for ECR305C
Here are the key specifications for this product model.
Metric
Operating weight 40,000 kg
Gross power 153 kW ...at engine speed 1,800 rpm
Bucket capacity 1.23 - 1.95 m³
Lifting capacity, along undercarriage 11,000 kg ...at reach / height 6 / 1.5 m
Max. digging reach 10,635 mm
Max. digging depth 6,960 mm
Breakout force, SAE J1179 (Normal) 163 kN
Breakout force, SAE J1179 (Boost) 173 kN
Tear out force, SAE J1179 (Normal) 127 kN
Tear out force, SAE J1179 (Boost) 135 kN
Overall width feet inches 3,590 mmCompact body
Confined areas now seem a lot less confining.
That's because you are free to work in your Volvo ECR305CL.
One lane of traffic. Next to buildings on busy streets. Between utility poles.
You can go where the work is, and you can handle it all with the power, lift capacity and stability you demand.
-
28
1999 kubota b2100. 4wd shuttle shift. 21hp. 3 point hitch. Rear and mid mount pto. 2100hrs. Other machinery and trailers and attachments available. Shipping available. Call 604-866-2631
-
29
2010 Lonestar 13 speed with Cummings ISX 500, clean truck runs great MVI till April 2021, 899000kms
Asking $37000 OBO
-
30
Attention Chain link fence contractors if you don’t have a Barbwire Hog, you need one. It makes putting 3 strands on top of the fence so much quicker with estimated labour savings of 20-30 hours/mile. We have a single new unit in stock at a great price it generally takes 4-5 weeks for us to get one of these built to order so don't wait any longer to add one of these attachments to your operation.
The Barbwire Hog effortlessly dispenses up to three rolls of barbed wire simultaneously for chain link security fence installation to save you time and money. Instead of worrying about the difficult labor required for a wire roll, workers simply need to operate the barbwire equipment and ensure the wire is secure after installation. This Barbwire Hog also comes with bottom wire option.
Install up to three strands simultaneously and complete jobs in a fraction of the time. The hydraulic arm is extremely mobile which allows the operator to accurately unroll wire right against the posts. The pivoting arm at the base makes it possible to lay new wire from either side of the fence.
Compact and easy to transport, the Barbwire Hog is easy to get in and out of busy job sites.
-
31
make / manufacturer CSM
1991 CSM 4 axle transfer trailer
-spring suspension
-floor has been repaired
Pulls straight great shapeSelling for $20,888
Local Delivery can be arranged in Lower mainland/Fraservalley
Call /text
604-788-2001
-
32
SERIOUS INQUIRIES ONLY. I AM RETIRING SO SELLING EVERYTHING
- front anxle 18000
- back axle 46000
- 4 wheel lock
- CAT 525 MBN single tubro
- nuway air ride suspension
- tires 80%
- 16.6 Langfab with high lift tailgate
- electric tarp
-
33
Peterbilt Leaf springs:
Front Leaf springs
Rear Leaf springsMid-Ranger
330 335 348 352
353 357 359 362
372 376 377 378 379
385 386 387
COE
Air SuspensionsCall or Email us for quote
800-661-4205
Dendoff Springs
12045 Old Yale Road Surrey BC
Hwy 17 and Old Yale Road
Manufacturing since 1906
Advance Mixer • American La France • Autocar • Binkley • Bluebird • Chalmers • Chevrolet • Crane Carrier • Dodge • Euclid • Ford • F150 F250 F350 F450 F550 E350 E450 Freightliner • Fruehauf • GMC • Hayes • Hendrickson • Hino • Hutchens • Hyster • International • Navistar Isuzu • Jeep • Kenworth • Big 6 Fat trucks• Mack • Mazda • Mercedes • Meritor • Mitsubishi • Navistar • Oshkosh • Ottawa • Neway • Nissan • Pacific Truck • Payhauler • Peerless • Peterbilt • Premier • Ram • Reyco/Transpro • Silver Eagle • Spartan Motor Home • Sterling sprinter • Thomas Bus • Toyota • Trailmobile • Volvo • Watson Chalin • Western Star
-
34
Ready for work , Whole unit for sale. Engine overhauled recently. 1050000 miles All leather studio sleeper with all amenities like tv,dvdplayer,microwave and fridge. Comes with headrack and moose bumber. Full locker diffs,bunk heater, inverter.
Specs-cummins 550,super forty rear.
For more information, contact (604) 366-3204
-
35
77 vette. Built rear end, built transmission. 5000km on new motor tons of work done. The car is in really nice shape. Really fast really fun. Ready for summer. Looking to trade for a nice lake boat or a side by side
7785864029
-
36
1967 Pontiac Gto 400 4speed ,non matching engine numbers , 3 years high quality frame of nuts end bolts restoration ,powder coted frame, 95% new parts, Wilwood big break system , new build correct ram air engine , dyno , appraised, Hurst , power steering, factory tinted glass, many upgrades , flowmaster exhaust system,.......list too long.
Only emails/ leave phone number with name.TnxSerious inquires only
PLEASE no brokers, no trade, no Covid deal ,Tnx Alex
-
37
I’m looking for our old 1965 Plymouth barracuda Drag car was sold around 2009. Was 383 auto was sold without the tunnel ram. had custom made headers and frame ties, had big bolt pattern front dis brakes small bolt 8 3\4 posi, Centerline wheels, red with white stripes roll cage and B&M shifter. if you have seen or Know where this car is please let me know I would love to buy it back or see if the car is still around thanks
-
38
This is a daily driver. Solid rust free. The interior is almost mint. It has a 3.8 engine, automatic. Hard to find let alone in this condition. Get collector plates.
If interested send your phone number
Monza 2+2, spyder
-
39
Shell
Seats
Doors
Hood
TrunkOBO
-
40
OPEN TO REASONABLE OFFERS on this clean rust-free US import 66k mi BC Collector-plated 73 351W 0.030 over Edelbrock Performer heads Comp Cams Xtreme Energy cam/lifters Crane Cams roller rockers Edelbrock timing chain and MPG windage tray Performer RPM manifold and Performer 600 cfm carb MSD Pro Billet distributor 6AL ign Blaster 2 coil Champion alum rad Spal elec fan Sanderson headers with custom exhaust Magnaflow SS mufflers C6 B&M torque converter TransGo shift kit Lokar shifter and kickdown 9” rear end with Speedway 3.50 Posi 3rd Member Moser alloy axles Caltracs Front suspension fully upgraded upper and lower control arms custom coil springs poly bushings roller perches 1" sway bar pwr steering delete SSBC manual disc front brakes oversize rear drum brakes 15/16" dual bowl master cyl SS braided brake lines 2-tone Ivy Gold interior in fantastic original condition with new oem style seats Body straight recent Z-code Sage Gold closed door paint job All emblems/trim intact Receipts for almost all parts/service
-
41
1970 cougar NOT an eliminator just looks like one . Was never really rusty . New Bullit green paint . Interior original and very nice . All new front end . New tires and wheels . All new brakes . Great sound system . All around nice car . Priced well . Please be serious if you call . Videos available. Call Bob 604 970 2955 . Car is in Bc but registered and insured in Alberta .
-
42
1950 ford convertible
call 604 596 2785
-
43
1988 Pontiac Trans Am GTA WS6 Orginal WS6
Red exterior over grey interior
Disc brakes
Digital dash
Power windows
Power locks
Power mirrors
Power lumbar
New fuel pump and fuel tank
New fluids and oil change
Car is in good condition for the age
Paint is 7/10
Asking $7500 obo
-
44
Looking for a daily driver,
Let me know what you got
-
45
SNOWMAGEDDON ON NOW!!! TEXT US - 604.210.4572! NOW is the Best time to Buy a NEW SLED - Come See Why We
Are #1 - Sales - Parts - Service - We are a Certified Repair and Performance Centre - Easy Financing - InstantApprovals - Low Interest Rates & Payments - We Accept Trades! Check ahead for availability, inventory, andlocation [+$1295 pdi, $199 doc and taxes Engine Type: 8000 C-TEC2, 2-Stroke Displacement: 794 cc Cylinders: 2 Bore x Stroke: 85 x 70 mm Engine Cooling: Liquid Carburetion: Next Generation C-TEC2 Ignition: Digitally Controlled CDI Exhaust: APV with Tuned Pipe, Pipe Sensor and Stainless Steel Manifold and Muffler Brake Type: Stealth Hydraulic Master Cylinder with Lightweight Caliper Drive Clutch: ADAPT CVT Driven Clutch: ADAPT CVT Front Suspension: Arctic Mountain Suspension (AMS) Front Travel: 7 in. Rear Suspension: ALPHA-ONE Rear Suspension Rear Travel: 14 in. Ski Type: G2 ProClimb Ski Stance: 35.5-37.5 in. - Adjustable Track Type: Power Claw Track Dimensions: 15 in. x 154 in. x 3 in. Speedometer: Digital Tachometer: Digital Odometer: Digital Headlight: LED with Accent Light Fuel Capacity: 10.4 or 11.7 gal. (varies by model) Windshield: 1 in. Mountain Height Color: Green/White Electric Start: Push Button Electric Hand & Thumb Warmers: Standard Reverse: Push-button Engine Mirrors: Optional
-
46
SNOWMAGEDDON ON NOW!!! TEXT US - 604.210.4572! NOW is the Best time to Buy a NEW SLED - Come See Why We
Are #1 - Sales - Parts - Service - We are a Certified Repair and Performance Centre - Easy Financing - InstantApprovals - Low Interest Rates & Payments - We Accept Trades! Check ahead for availability, inventory, andlocation [+$695 pdi, $199 doc and taxes Engine Type: 200, 4-Stroke Displacement: 192 cc Cylinders: 1 Bore x Stroke: 70 x 50 mm Engine Cooling: Air Carburetion: BS-25 Carburetor Ignition: CDI Exhaust: Muffler Brake Type: Hydraulic Brake/Disc on Driveshaft Drive Clutch: Arctic 5.25 in. Diameter (RPM Sensing) Driven Clutch: Arctic 6.75 in. Diameter (Roller Cam) Front Suspension: Arctic Wishbone Suspension (AWS) Front Travel: 4.5 in. Rear Suspension: Slide-Rail, Adjustable Torsion Spring, Coil-Over Rear Shock Rear Travel: 8.5 in. Ski Type: Youth Ski Stance: 29.5-31.5 in. - Adjustable Track Type: Cobra™ Track Dimensions: 10 in. x 93 in. Speedometer: Optional Headlight: Halogen 1-Bulb Fuel Capacity: Muffler Windshield: 4 in. Low-Height Color: Dynamic Charcoal/ Medium Green Electric Start: Standard Hand & Thumb Warmers: Standard
-
47
SNOWMAGEDDON ON NOW!!! TEXT US - 604.210.4572! NOW is the Best time to Buy a NEW SLED - Come See Why We
Are #1 - Sales - Parts - Service - We are a Certified Repair and Performance Centre - Easy Financing - InstantApprovals - Low Interest Rates & Payments - We Accept Trades! Check ahead for availability, inventory, andlocation [+$695 pdi, $199 doc and taxes Engine Type: 200, 4-Stroke Displacement: 192 cc Bore x Stroke: 70 x 50 mm Cylinders: 1 Engine Cooling: Air Carburetion: BS-25 Carburetor Ignition: CDI Exhaust: Muffler Brake Type: Hydraulic Brake/Disc on Driveshaft Drive Clutch: Arctic 5.25 in. Diameter (RPM Sensing) Driven Clutch: Arctic 6.75 in. Diameter (Roller Cam) Front Suspension: Arctic Wishbone Suspension (AWS) Front Travel: 4.5 in. Rear Suspension: Slide-Rail, Adjustable Torsion Spring, Coil-Over Rear Shock Rear Travel: 8.5 in. Ski Type: Youth Ski Stance: 29.5-31.5 in. - Adjustable Track Type: Cobra™ Track Dimensions: 10 in. x 93 in. Speedometer: Optional Headlight: Halogen 1-Bulb Fuel Capacity: Muffler Windshield: 4 in. Low-Height Color: Dynamic Charcoal/ Medium Green Electric Start: Standard Hand & Thumb Warmers: Standard
-
48
brand new Blazer 200HS in crate. Recommended ages 14+
-
49
SNOW CHECK IN EFFECT!!!!! PRE-ORDER YOURS NOW!!!! RECIEVE A $400 ACCESSORY CREDIT WITH ALL PRE-ORDERS. Rear Travel: Fixed Install Kit: 13.0 in. (33.0 cm); TSS Install Kit: 21.0 in. (53.0 cm) Ski Type: Traverse® Dry Weight: 119.5 lb. (54.2 kg)
-
50
SNOWMAGEDDON ON NOW!!! TEXT US - 604.210.4572! NOW is the Best time to Buy a NEW SLED - Come See Why We
Are #1 - Sales - Parts - Service - We are a Certified Repair and Performance Centre - Easy Financing - InstantApprovals - Low Interest Rates & Payments - We Accept Trades! Check ahead for availability, inventory, andlocation [+$1295 pdi, $199 doc and taxes Engine Type: 8000 C-TEC2, 2-Stroke Displacement: 794 cc Bore x Stroke: 85 x 70 mm Cylinders: 2 Engine Cooling: Liquid Carburetion: Next Generation C-TEC2 Ignition: Digitally Controlled CDI Exhaust: APV with Tuned Pipe, Pipe Sensor and Stainless Steel Manifold and Muffler Brake Type: Stealth Hydraulic Master Cylinder with Lightweight Caliper Drive Clutch: ADAPT CVT Driven Clutch: ADAPT CVT Front Suspension: Arctic Mountain Suspension (AMS) Front Travel: 7 in. Rear Suspension: ALPHA-ONE Rear Suspension Rear Travel: 14 in. Ski Type: G2 ProClimb Ski Stance: 35.5-37.5 in. - Adjustable Track Type: Power Claw Track Dimensions: 15 in. x 154 in. x 3 in. Speedometer: Digital Tachometer: Digital Odometer: Digital Headlight: LED with Accent Light Fuel Capacity: 10.4 or 11.7 gal. (varies by model) Windshield: 1 in. Mountain Height Color: Green/White Electric Start: Manual Hand & Thumb Warmers: Standard Reverse: Push-button Engine Mirrors: Optional