or
Filters Buy and sell, Tools with in Canada, Alberta, Edmonton.
-
1
- DeWalt DC930 XRP 1/2” 14.4V Cordless Drill / Driver 3 Speed 450/1,450/ 1,800 min (RPM) Tool Only… $10
-
2
Greenlee knockout set. Everything works as it should. Selling because I have too many sets. $300 obo
-
3
Power lift PLN2500 Magnet
Selling 2 used lift magnets,
Retail for $3000 each selling for $400 each.
Will sell individually.
These are used magnets that are calibrated/tested yearly. Sold water jet and no longer need such large magnets. All info in linkhttps://www.grainger.ca/en/product/p/MGNPNL2500?cm_mmc=PPC:+Google+PLA&gucid=N:N:PS:Paid:GGL:CSM-8500:NOYSQ4:20501231:APZ_1&gad_source=1&gbraid=0AAAAADeC2fA1wHlV47oDJgR0b40SwUIKA&gclid=Cj0KCQiA57G5BhDUARIsACgCYnzFRFodrlVoplTe-4_kBHUwKK8LvRu6roc2A-6EOa9sg_qi-P4yiYEaAstqEALw_wcB&gclsrc=aw.ds
-
4
10" Dewalt miter saw with stand
-
5
3 drawer tool storage
Drawers are 15" w x 50
Dimensions: 46.5w x 51" L
-
6
https://www.amazon.ca/Bosch-GBH18V-45CK27-PROFACTOR-Connected-Ready-Exclusive/dp/B09FFV745Q/ref=sr_1_1?crid=NDV57DUQSW83&dib=eyJ2IjoiMSJ9.yP-tPCUYgk4C25ZmkmG1xA.rGyYvzLLl1U1Q_A86tyWFCCuZfXwkRRuR0YKhHWVHuE&dib_tag=se&keywords=bosch+18v+hitman+45ck27&qid=1712768900&sprefix=bosch+18v+hitman+45ck27%2Caps%2C176&sr=8-1
-
7
Tool Box to provide storage for all your needs in one unit
Locker style with 5 cubby’s left side
All drawers and doors open and shut easily
6 deep drawer
6 shallow drawer
2 bigger style cubby’s on top
All doors lockable have keys
- 8
-
9
Corded, good condition.
-
10
Call us with any questions 250-613-7523
PC-34 Plasma Cutter Product Specifications:
Model: PC-34
- 60A Plasma Cutter (Air)
- DC INVERTER
- Uses Compressed Air needs 40-65 PSI @ 4CFM
- Dual Voltage 110 20amp/220V 30amp 50/60Hz Auto Detection
- Maximum Cut: 1 1/4" @ 4 inches per Minute
- ALL BRAND NEW Transistors/(IGBT)
- Duty Cycle 70% @ 60 Amp
- Power Factor: 0.93
- Efficiency: 85%
- Dimensions: 18.11 x 10.04 x 15.98"
- Pilot Arc
What's In The Box?
- 1 piece x Earth Clamp
- 1 piece x Panasonic P80 torch 12ft
- 2 sets cconsumables
- Regulator & water separator w/ pressure gauge
Ships in 1 day and takes 2-8 days to arrive within Canada
Shipping is a Flat rate of $50 in Canada
We are fully accredited with the BBB (Better Business bureau) https://www.bbb.org/We hold a A+ rating
Check out our website for DEMO videos
https://www.rjrequipmentinnovations.com/product/pc-34-plasma-cutter/
All our units come with a unbeatable 3 year warranty.
We can ship COD (Cash on Delivery) with Canada Post for a $15 fee
or We accept PayPal, Visa, MC AMEX and Etransfers give us a call 250.613.7523
WE WILL NOT ACCEPT CHEQUES
-
11
Like new drywall bead box with all the plates
-
12
Selling 2 brand new in the box bissett 18ga Brad nailers
$120 each nailer
587-280-3384
Alex
-
13
Mastercraft Heavy-Duty 90.8L Wheeled Tool Box with lift out tray. Measures 30” long x 19” wide x 19” tall. Has 2 lockable lid catches, telescoping handle and 2- 6” diameter wheels.
$100
We are downsizing in preparation for selling and moving. Please check out my other ads.
Reach out anytime for more info.
-
14
Used once
New condition
Comes with manual
Located in Sherwood Park, AB
-
15
Please READ ENTIRE AD!
EMAIL YOUR PHONE # OR NO REPLY, NO TEXTS due to scammers, thanks!
Will CALL you ASAP!
This $1000+ professional chainsaw was purchased last year- has been reliable, amazing on fuel, very powerful for 60+ ccm, 'cuts wood like butter', efficiently !
Note, was backup saw, has only about 10 -15 hrs. with v/g original bar/ chain !
Excellent compression , kept clean, maintained, sharpened chain, ready to rumble!
( FYI- Only ever used Husqvarna semi synthetic 2 stroke and Shell premium fuel at 40:1 mix ).
Reason for sale is just need larger pro. Husqvarna/ Stihl low hours chainsaw over 70 ccm - 95 ccm. for logging old growth/ milling etc... That's the only part trade that MAY consider, upon inspection, otherwise $800 (reduced to $750 cash firm) .
NO phone number, lowballers, scammers etc. will be ignored/ blocked .
No holds, FCFS, by appointment only!
Thanks for genuine interest!
-
16
Lightly used and ready to go. Serious setup here, this XMT can run b8g power https://www.google.ca/url?sa=t&source=web&rct=j&opi=89978449&url=https://www.millerwelds.com/equipment/welders/multiprocess/xmt-450-multiprocess-welder-m00430&ved=2ahUKEwiwh9nc5biDAxWdAjQIHbQqBPsQFnoECAkQAQ&usg=AOvVaw3OWbydPpRIeiXW7L3S-_ng Cones witu wire feeder and full spool of ER70-S2. witu cart.
-
17
2”- 3 1/2 Campbell Hausfeld notched 34 degree framing nailer
-
18
48 inch square bull float with 8 foot extension
-
19
Used only once. Excellent condition. Like brand new
-
20
I’m posting for my step mom. After my fathers passing she needs to sell these items. After I view messages I will pass her # onto you
Only serious injuries Saw Bench Table
-
21
Selling for family member
9inch table saw.
-
22
Selling a Milwaukee 6519 Sawzall Reciprocating Saw 12 Amp with case. Works great no issues.
-
23
Have a sweeney torque multiplier for sale. 3.5 to 1. 3\4 drive input to 1 inch output. Max ouput 2000 lb ft.
500 obo
Call dan at 5879748593 if interested.
-
24
Find Guns for sale and gun auctions in your area. Glockmarket404.com has the largest selection of firearms classified for easy viewing. You will find all types of guns, pistols, shotguns, and rifles. Visit our website for more information about Guns.
-
25
All drawers work. Minor wear.
Pick up only.
-
26
Are you looking for Mud Pressure Gauges? Contact Instruments is your one stop solution for Oilfield Instrumentation that are not just highly durable but also accurate and reliable. Our Mud Pressure Gauges are engineered to perfection to ensure that you get the most out of your drilling operations. To view our broad range of Mud Pressure Gauges visit us at: https://www.contactinstruments.com/mdse/mud-pressure-gauges.html
-
27
sear craftsman brand is running good
-
28
Drilling Mud Pump For Sale: Are you looking for Drilling Mud Pumps?
Contact Instruments is your one stop solution for Oilfield Instrumentation that are not just highly durable but also accurate and reliable. Our Mud Pressure Gauges are engineered to perfection to ensure that you get the most out of your drilling operations.
To view our broad range of Mud Pressure Gauges visit us at:
https://www.contactinstruments.com/mdse/mud-pressure-gauges.html
-
29
Our Type F Standpipe Pressure Gauges are highly reliable and robust and is equipped with an easy-to-view, liquid filled and full faced dial to capture accurate readings. These Standpipe Pressure Gauges are even capable of withstanding rig vibrations, over-pressure situations and kicks etc.
For more info Call us at 780-955-899 or to order online visit us at:https://www.contactinstruments.com/mdse/standpipe-pressure-gauge-f.html