Buy and sell, Tools with in Canada, Alberta, Ft Mcmurray.
-
1
The Capital automotive equipment's 14,000 Lbs. 2-Post Car Lift is one of our best-selling two-post lifts because of its heavy-duty design and a long list of features. It has just the right height and with to get the job done right. The 14,000 LB lift capacity allows you to hoist most any modern heavy vehicle on the road today.
These two-post car lifts are available in two models-
1. HP14 -Base plate- This type of lift consists of base plate between two columns.
2. HPL14 - Clear Floor - This type of lift has a overhead beam with clear floor.
https://www.capitalautoequipment.com****Two Post Clear Floor***
Specifications for HPL14:
-Condition: New
-Lifting capacity: 6300kg (14,000 lbs.)
-Lifting height: 1860 mm (73.23")
-Lifting time: 55 seconds
-Overall height: 4200 mm (165.15")
-Overall width: 3840 mm (151.81")
-Width between columns: 3200 mm (125.98")
-Minimum pad height: 120 mm (4.72")
-Power: 3.0 kW/4.0 HP
-Voltage: 220V
-Breaker: 30A
-Weight: 1100 kg (2425 lbs.)price : $4599+tax
****Two Post Base Plate ***LiftCapacity 6300kg / 14000lbs
Overall Height 2989mm/117.67”
Overall Width 3840mm/ 151.81”
Maximum Lifting Height W/O Truck Adaptor 1900mm / 74.81”
Minimum Height145mm / 5.7”
Lifting Time 55s
Outside Column to Outside Column Width 3620mm /142.51”
Inside Column Width 3200mm / 125.98”
Drive Through 2800mm/110.23”
Column Thickness of Steel 6mm / 0.236”
Carriage Thickness of Steel 6mm /0.236”
Arms Thickness of Steel 8mm / 0.314”
Cable Diameter 8.2mm / 0.323”
Voltage220vHydraulic Fluid Requirment 3-5Gallons AW32/AW46
price : $4249+ tax
-1 Year Manufacturer Warranty for Motor and Cylinder
-1 Year Manufacturer Warranty for other partsCONTACT ONTARIO BRANCH (365) 888-3765/ (365)317-7933
CONTACT BRITISH COLUMBIA BRANCH (604)-314-9755
EMAIL US: ontario@capitalautoequipment.comhttps://www.capitalautoequipment.com
We are located in Surrey,BC and Hamilton,ON
Shipping All Over CanadaKeywords : 4 post parking lift tire changer tire balancer tire shopcar lift truck lift semi lift car hoist two post lift 4 post lift 2 post hoist4 post hoist mid rise scissor lift alignment machine 3D heavy duty tire change
-
2
- Does not include original packaging or manua
-
3
http://www.brighterfuturesolar.ca Call us to learn more or order your Custom Off Grid Kit today
BrighterFuture Solar understands the importance of Energy Independence and more importantly the security that comes with it.
No longer worry about complicated systems, wiring, batteries, or Fumes & maintenance. Our OFF-Grid kits are custom designed with your input to match your energy unique energy needs for
both on the go storage or at Home. Designed using 3.9kw, 5kw or 14kw Lithium Batteries that provide a long lasting, reliable power source that are both Maintenance free and fumeless.
Tied with the Power tower off grid inverter for a pure off grid solution or the Sol Ark Hybrid inverters and enjoy both grid & off grid at same time with a seamless plug & play experience.
Simply plug your batteries and Panels into the inverter and then the out out to the breaker ensuring you an easy and quick set up even at the most remote sites and weather conditions.
With system designed for easy expansion that allows for more batteries up to 154kw to be string together per inverter. Simply install more panels as need up the inverter rating.
We offer both custom Roof or Ground Mount options for Panel set ups as well as custom mounting advice for remote locations. We carry a variety of sizing's from small for easy portability
as well as to large long term OFF-Grid kits for all your Cabin, Cottage, house needs and more.
Custom Units & Designs Available
The Mini-$7690 1kw Solar, 3.6 kw Battery
The Starter-$14,990 3.2kw Solar , 5kw Battery, 5kw Sol-ARK or 6kw Power Tower
The Cottager-$22,490 4.6Kw Solar, 14kw Battery, 5kw Sol-Ark or 6kw Power Tower
The Chateau-$28,990 7.2kw Solar, 14kw Battery, 12kw Sol-Ark
-
4
Upgrading to all 20v tools
Comes with grinder not in pic
All items are used but great shape
Asking $300
-
5
Brand new never used EG301A MAKITA gas generator
asking $800.00 OBO
-
6
Brand new, never used., was $750 new.
-
7
Selling a complete bostitch nailer kit.
Framing
Roofing with box of nails
16ga
18ga
Compressor with flexzilla hose
These are all in next to new condition and real Bostitch, the ones at Canadian Tire are re branded garbage.
$1000 for the full kit with compressor
-
8
1/3 HP Submersible Pump / Cast Iron / Stainless Impeller / Vertical Float Switch / Model # 92341
Used for 4 months waiting for warranty pump to arrive
Retail Price .. 220 plus tax
-
9
Makita 5" Grinder - 9005B, Brand New - Never Used
-
10
Posted by Brad in tools, power tools in Alberta, Fort McMurray. January 11, 2023
-
11
$1499.99
Manufactured in Prince George B.C. Canada
PTA-500 Product Specifications:
- Power supply voltage AC 110/220V Auto detection
- Power supply capacity 7.3 kVA
- Rated input current (TIG) 16.7 A
- Rated input current (MMA) 23 A
- Rated input current (CUT) 27 A
- Output current range (TIG) 10 - 200 A DC
- Output current range (MMA) 10 - 200 A
- Output current range (CUT) 10 - 50 A
- No-load voltage (TIG) 56 V
- No-load voltage (MMA) 56 V
- No-load voltage (CUT) 220 V
- Dia. of welding rodΦ(MMA) Max 5/32
- Arc initiation way (TIG) HF
- Arc initiation way (MMA) Touch
- Arc initiation way (CUT) HF
- Protection grade provided by enclosure IP 21
- No-load loss 50 W
- Power factor 0.93
- Insulation class F
- Duty cycle 70%
- Efficiency 85%
- Air pressure (CUT) 40-60 psi @ 4 CFM
- Gas flow (TIG) 2-5 L/min
- Gas flow (CUT) 100 L/min
- Cutting thickness (CUT) 3/4 inch @ 2.5 inches per Minute
- Weight 12 kg
- Dimension (mm) 420*210*300
What's In The Box?
- 1 piece x Ground Clamp
- 1 piece x Stick Holder
- 1 piece x Panasonic P80 torch 12ft
- 1 piece x Tig torch 12ft
- 3 sets consumables
- Regulator & water separator w/ pressor gauge
RJR Equipment Innovations LTD in a Canadian company designing quality welders and plasma cutters for the past 13 year. located in Prince George B.C
All our units come with a unbeatable 2 year replacement warranty. If you have any problems send it back to us COD and we will ship you a new unit when a tracking number is provided.
We can ship COD (Cash on Delivery) with Canada Post for a $15 fee
or We accept Visa MC AMEX and Etransfers give us a call 250.613.7523
WE WILL NOT ACCEPT CHEQUES
-
12
Selling a used dewalt 12v charger, works fine. Price 10$.
-
13
Used once Makita Router - 120v / 4amp. Posted in tools, power tools in Fort McMurray. September 18, 2022
-
14
Posted by Brad in tools, hand tools in Alberta, Fort McMurray. January 4, 2023
-
15
New Ridgid ratching plastic pipe cutter
Model RC2375
-
16
Selling all kinds of used tools . Look me up if your interested or ask if i have something else thanks 780 881 9775
-
17
Matco 4s tool box good condition will take tool cart as part of trade.24.5 d 72w 66.5 h
-
18
Snapon toolbox , 35" bought a bigger box no longer need this cart .
Comes with 1 key and cover.
Located in Fort McKay .
-
19
$3000 OBO
Hardly used precision Tig 225 needs a new home
Comes with lots of Tig rod and extras
Comes with wheeled cart
-
20
Selling my toolbox without tools as I need to upgrade. Box is in working condition, may just need a drawer rail for the top drawer. Asking 500obo
-
21
Brand new Ultra pro spray gun
Never used.
Asking 60.00
-
22
Heavy duty torch handle miller smith wh200a
-
23
Heating tip assembly smith st615
-
24
EN3315 Have several
-
25
Like new 16” chainsaw forsale used maybe 3 times $150. OBO
-
26
S400a shurfill auto filling system. Make an offer
-
27
Like new magnetic sweeper.. New cost is ~$350 and willing to let go for $170. Works great to pick up nails and screws around the yard, driveway or construction site.
"On line description--> Rolling magnetic sweeper, extended length 47 in, length 26-1/4 in, width 7-1/2 in, surface size 24 x 5 in, pull capacity 150 lb, ribbed aluminum shaft construction, plastic grip handle type, solid rubber tires with steel hubs wheel type, wheel dia 6 in, ON/OFF lever for load release, application for retrieving iron, steel and all ferrous materials."
-
28
Cutting tip assembly miller smith sc209
-
29
I have a dewalt drill n impact set and a dewalt reciprocating saw for sale .there is pics of what it is new asking $500 obo text 780-838-4645 thanks
-
30
Range Road is an Alberta family business based out of Eckville. In business for 10 years with 24 points of service throughout Canada. We have sold over 3000 processors throughout North America.
The EcoPro300 is our newest model and rated best in the <$10K category.
In stock, next day shipping.Choice of Engine:
14hp Kohler or 13hp Honda (upgrade)
3 Year Engine Warranty from Kohler/Honda DealerStandard EcoPro300 features;
Hydraulic Ram w/7 Second Cycle Time
Hydraulic 20" Chainsaw Bar & .325 Chain
Maximum Log Diameter 16"
Maximum Splitting Length 24" (adjustable)
Adjustable 2-4 Way Splitter
Log Hold Down
3 Meter Output Conveyor
10" Wide Conveyor Belt
Winch Kit
Conveyor Height 2m based on 16" Length Cuts (longer pieces = lower height)
Hourmeter
Emergency Kill Switch
Conveyor Speed Control/Shut Off
Roller Infeed
Draw Bar w/Tongue Jack
2" Coupler
Folds Up Easily for TransportPricing does not include assembly, tax or shipping if applicable.
Accessories available, hydraulic saw operation, log tables, log lifts, logging tools & tongs, firewood bags, 6 way splitter & more!Find us at www.range-road.ca - Facebook @rangeroadent
Email: sales@range-road.ca
Call: 403-877-6559 Hours: M-F 10am-5pm
-
31
Selling my brand new multi process esab 215ic.
Welder can do mig/stick/tig and comes with all the whips and a peddle. It also comes with some consumables for the tig torch. Welder is all electronic and has auto welding modes for all three processes. Mig was used twice but that’s it. Selling to get an AC tig.