Cars & vehicles, Boats, watercraft, Other with in Canada, Ontario, Hamilton.
-
1
2 Seadoos and Trailer for Sale
Seadoo were tuned up last year and ran great, Comes with Trailer also - GTZ has 212 hours i will confirm the GTI - Looking for $7900
-
2
Excellent conduction low hour boat motor.
Short shaft, no electric start, starts and runs great. Have no need for it.
-
3
Montego 169 3 liter 4 cylinder inboard outboard bowrider newer trailer spare prop stereo very clean boat in great shape.$6000 or best offer.
-
4
Gently used Starcraft deckboat,, Around 200 hrs on Yamaha 150 outboard motor.
Boat is in very good condition, spacious
seating for entire family. Fast and stable on the water. Boat is being sold with a tandem axle boat trailer. Axle bearing, new tires, new lights and wiring, new surge break system including break lines.
Serious inquiries only.
-
5
Outboard Marine Corporation.
60 pages in English, flip it over and there's 60 more pages in French.
Good overall condition, with some aging.
$20.00.
Please message a number to contact for meeting up, or to arrange shipping.
Thanks.
-
6
42 in SS Edson 6 spoke Destroyer steering wheel. $ 450.00
1 in straight shaft 1/4 in keyway
hub 2 3/8 deep
hub 2 3/4 across
-
7
Bertrand 1200 lb Cantilever PWC Lift - Secure and Protect Your PWC with Ontario Boat Lifts!
After a day on the water, docking your PWC should be worry and hassle-free! Ontario Boat Lifts understands your need for peace of mind, ensuring that your precious cottage toy remains secure and protected from the unpredictable elements of nature. Say goodbye to waves, weather, and dirt interfering with your enjoyment at the cottage!
As a trusted Canadian manufacturer, Ontario Boat Lifts offers a range of high-quality products designed to meet your boating needs. Our Bertrand 1200 lb Cantilever PWC Lift is constructed with marine-grade aluminum, providing exceptional durability and longevity.
Key Features:
- Industry-leading 5-year structural warranty, ensuring long-lasting performance
- Easy leg adjustment with a hitch pin replacing a bolt
- 1-inch hole spacing on leg extensions for precise and seamless installation
- Stainless steel performance fasteners at all pulley interfaces for added strength
- Extra-long vinyl bunks for optimal support and protection
- Lifts with a reliable stainless steel aircraft cable
- Marine-grade aluminum construction for ultimate resistance against corrosion
- Standard leg extensions designed to accommodate 3-4 feet deep water without compromising overall lift height
- Large crank wheel and spinning knob for effortless lifting and loweringAt Ontario Boat Lifts, we strive to enhance your boating experience by offering a wide range of complementary accessories. Discover boat lift motors and boat lift wheels that further streamline your docking process.
Call us now at Canada Toll-Free: 1-855-200-5438 to inquire about the Bertrand 1200 lb Cantilever PWC Lift and start using your boat more frequently!
-
8
Seadoo GTX with the 787 RFI motor. Runs well, some dock rash as expected in machine this age, seat in good condition. Has around 320 hours on it. Comes with Karavan trailer in good condition. Family decided they wanted something newer and more powerful so it's for sale. Unfortunately it's in my driveway at home, so water test is not possible.
-
9
15’ boat for sale 50H.P 2 stroke Johnson…motor runs great
New floor & carpet
Brand new tires and lights on trailer
New live well pump
Boat cover
Assortment of life jackets
Brand new deep cycle battery and crank batterySerious Inquiries only. Price Firm.
Located in Stoney Creek
-
10
Improves performance. get on plane quicker. reduce cavitation. Fits all outboards 25hp and up. some drilling required.
-
11
Mercury Powerhead, it has electric stater on it, compression is over 120psi. came off a 2004 motor that had remote controls which i don't have, I also have the exhaust housing with swivel bracket, . Please call or Text me 905-687-7675
-
12
2018 skeeter zx200
Tournament ready boat
2018 skeeter ZX200 -19’6” in length
Comes with power pole sportsmen II with remote at dash and hand held remote
2020 Yamaha 200 SHO break in period done and has 25 hours on motor.
Minkota 80lb thrust fortrex trolling motor
Lowrance elite 7 TI at bow- down scan, chirp, GPS, side imaging
Hummingbird solix 10- Mega DI/SI, chirp, GPS, auto chart liveremovable cooler seat to fit three people
two pedestal seats
padded front deckLifetime warranty on Boat hull and 4 years left on Yamaha motor all transferable warranty
This boat is amazing in rough water, can take waves very nice and very comfortable to fish out of. Great for the die hard tournament angler or the weekend warrior chasing a big bite. This boat will not disappoint you! just email for any questions.Bass boat , Skeeter, Ranger,lund,princecraft,nitro,megabass,alumacraft
-
13
CLEAR OUT SALE SAVE $$$ ON ALL KEVLAR CANOES *
LIMITED QUANTITIES AND COLOURS.
Web seats like in Swift canoes or laced seats like in Nova Craft canoes.
Deep dish carrying yoke from Teal
Silver or black trim package.
Simple pricing.16' and 16'4 $2699.00
15' and 15'4 ; $2599.00OPEN BY APPOINTMENT ONLY DURING COVID-19
Call ahead for appointment: 905-545-4745
Monday to Saturday 9:00 AM. to 4:00 pm.
Some Sunday appointment available.
905-545-4745
1-877-727-9053 toll free.BUY DIRECT FROM THE MANUFACTURER FOR A LOT LESS THAN RETAIL PRICE.
HUGE SAVING ON EVERYTHING.REAL OUTBACK CANOES STAND FOR:
Real
Eco-friendly
Active
LifestyleCreate great memories one paddle stroke at the time.
Great for paddling Outback or in your local streams or lakes.
There is nothing like the peaceful and relaxing feeling of paddling a great canoe.
CALL US FOR ANY INQUIRIES ABOUT CANOES.
Local: 905-545-4745
OR
TOLL FREE Canada and USA: 1-877-727-9053Canoe manufacturer SINCE 1975
OPEN TO THE PUBLIC
Buy direct from our factory retail outlet at wholesale prices or less for some with a small paint touch up or a scratch.
WE ALWAYS SELL PREMIUM CANOES FOR LESS SO YOU DON'T HAVE TO DRIVE ALL OVER FOR OTHER SALE EVENTS.
WE WILL BEAT ALL OTHERS SO CALLED SALES EVENT BY HUNDREDS OF DOLLARS AND YOU GET A BETTER WARRANTY AND A PREMIUM QUALITY CANOE.WE MANUFACTURE A LOT OF CANOES 12 MONTH A YEAR AND WE SELL A LOT OF THEM BECAUSE OF THE PRICE DISCOUNT AND THE SUPERIOR QUALITY AND UNMATCHED WARRANTY.
FACTORY OUTLET IN HAMILTON.
Hamilton, Ottawa, Welland, Sherbrooke QC.
We deliver to different locations starting from Hamilton going toward Ottawa every month.10 YEARS Workmanship WARRANTY
WE SELL A BETTER CANOE FOR A LOT LESS THAN AT OUR COMPETITOR'S LIMITED TIME SALES EVENTS.
Wholesale prices NOW AVAILABLE to the public.
ALL INVENTORY ON SALE.
NEW, DEMO, FLOOR MODELS, BLEMISH, USED,We manufacture high quality canoes for various resellers in Canada and USA and they resell them as their own private Brand.
Buy direct at half price without their logo from our FACTORY RETAIL OUTLET:OUR FACTORY RETAIL OUTLET IS LOCATED AT:
BEACH MARINE,
1127 Beach Blvd,
Hamilton.Our manufacturing facility is located just outside Hamilton so we have quick access to our large inventory.
We also deliver or ship anywhere in Canada and USA.
16' Premium KEVLAR 46 to 49 LBS.
OR same canoe with a Dealer label $3999.00Same exact 16' Kevlar canoe with the Beach Marine label $2699.00 with a small paint mismatch* or a scratch.
10 years workmanship warranty.OR
We offer different thickness of Kevlar with up to 8 layers in the floor area,
15', 15'4, 16', 16'4
The weight shown is for the complete canoe ready to use.Expedition, 41 Lbs to 53 Lbs
Standard, 38 Lbs to 49 Lbs.
Featherlight, 34 Lbs to 44 Lbs .Different models reflect different Kevlar thickness of up to 8 layers at the floor area.
Weight shown are for a complete and fully assembled canoe, NOT just the shell.
WE BUILD REAL KEVLAR CANOES WITH A REAL 10 YEARS workmanship WARRANTY SINCE 1975.
Kevlar 15', 16', 16'4 from $2599.00 to $2699.00 with a small paint mismatch.
Web seats or curved seats available.
Silver or black trim package.
Deep dish carrying yoke.
Black trim package.
Double sealed chambers inside both sealed flotation chambers.No need for those leaky drain plugs or drain screws when using our exclusive dual walls flotation system.
Nobody else goes that far for your safety.
Single keel.
No keel.Other manufacturer will only offer one shallow keel or no keel in their Kevlar canoes to lower their cost in labour
The shallow keel or no keel will let you turn quicker in fast white water but won't keep you on track in regular water and specially in the wind so you end up working harder to go straight instead of enjoying your trip.
We manufacture the following models:
Paddling canoes in: 15', 15'4, 16', 16'4
Kevlar Prospector from 35 Lbs to 52 Lbs ( 12' to 17' ).
Also included is a 10 years workmanship warranty when buying direct from us.
Dealers sell those canoes as their own BRAND.
We do not promote, advertise or use any of those BRAND that we manufacture for.
Dealers that we manufacture for are independent retailers and not associated with us.
Some resellers buy the shell only and use their own trim and some buy the complete canoe ready to sell.
They buy their canoes from us and Brand them as their own.Our web site is very minimal and only show a few models so we that don't interfere with the dealers that rebrand and sells the same canoes at full retail prices.
So if you like to pay extra for a specific Brand or label, go to your local retail dealer.
But if you want to save a lot of money, contact us or reply through Kijiji.OUR CANOES BUILDING PROCESS EXCEEDS CANADIAN COAST GUARD AND TRANSPORT CANADA REQUIREMENTS WITH OUR SAFER FLOTATION SYSTEM.
905-545-4745 Local
or
1-877-727-9053 Toll free across Canada and the USAContact us at :
real .108 @ hotmail . comRETAIL FACTORY OUTLET LOCATED AT:
Beach Marine
1127 BEACH BLVD
HAMILTON
L8H-6Z9
-
14
Fiberglass boat hulls. These are absolute projects, most of them stripped of all good components and left to their lonesome. If someone wants a hull to build themselves a boat, come get it. Text me for pictures 519-998-8863. Located at Dunnville
-
15
Amazing Intex Seahawk 2
2 Pro Patches. Holds
(Missing 1 Rod Insert)
30lb Minkota Trolling Motor
(Upgraded Perfect Condition W Box)
12 V Marine Deep Cycle Battery
A Year Old Perfect Condition
Marine Standard Lights For Full Legality
(Green, Red, White. At Night)
Safety Kit
(Whistle, Terrible Flashlight, Bouyant Heaving Line 50', Waterproof Bucket, Grappling 1.5 lb Foldable Anchor W 1.5+lbs of Chain, 50' Anchor Rope)
Life Jacket
12 V Electric Pump
(W Battery Accessories)
Original Pump Not Amazing
Patch Kit
2 Oars
Intex Proper Motor Mount
Smart Battery Charger
(Amazing Condition. Amazing Charger For All)
Waterproof Battery Box
(W Original Unopened Mount Kit, Secure Belt)
10' Upgrade 8 G Motor Wire Extension W 40A Fuse
Most Original Paperwork & Receipts
Most Items In Amazing Condition
Additional Accessories
Can Include 90L Woods Waterproof Bag
(Motor And Battery Do Not Fit In Bag)***Will Need Boat Licence W. Motor ***
Simple Way To Get On The Lake
For Fun, Fish Or Travel
Out All Day On "1"Ready For The Water When You Pick It Up
Fully Charged Not Going To Let You Down!Out Today For 4 Hours May 20, 21
Out Today Today 3 Hours June 08, 21Firm
-
16
45 ft sail boat ,hand built
Fibreglass hull
Yanmar diesel motor
Masts
Stored inside
Lead/concrete keel
Don’t know much more about it
$7000 come take a look
Great project
John 905 379 1108
Fisherville
-
17
Electric Start Parts for 9.9/15HP Johnson or Evinrude, Will fit motors up to 1993
Call or Text 905-687-7675 for more info
-
18
This 2016 SeaDoo spark was stolen from my yard April 16, 2021. In Stoney Creek/Hamilton
Im offering a $1000 cash reward to any tips that lead to finding it.
380hours on it.
-
19
Thundercraft Magnum 220 for sale. It has been serviced and runs well. Exterior in fantastic condition. MerCruiser 4.3 L Engine with power steering in great mechanical condition.
Comes with HUMMINBIRD Sonar 541, fridge, toilet, stove, radio, and a spacious interior cabin.
Needs cleaning, but otherwise in good condition.
Will not ship, please message for more information.
-
20
I’ve been slowly restoring the boat . I’ve spent most of my time on the engine which run perfectly and is a beast. Fully useable the way it is, great project for someone. It’s 75% of the way there. Currently stored near Orillia.
I had new windshields made for the boat
Lots of work into the engine, it was not rebuilt
Newly upholstered driver and passenger chairs
Minnkota trolling motor
New Casting chairs on decks
Trailers in great shape has new tires brakes have all been serviced
It needs some control wire, piping to the live wells, bench reupholstered, and carpeting.
-
21
REDUCED and will consider TRADE on a C class motorhome> This is a one of a kind boat. It started as a 25' Aluminum Starcraft Chieftan MK4 I think it was called (not sure). It was a weekender with an inline Mercruiser I/O straight six which was toast. I completely gutted it, pulled the drivetrain out and put in a single floor front to back. I cut the cabin roof off and moved it back to the back and supported it on aluminum tubing for the roof. I put a brand new marine plywood transom in it and capped the hole on the outside with 1/2 aluminum plate and added a motor bracket that will support up to a 225 horse power I believe. I added benches down both sides at the front and on the back, there is a bench on the starboard side and the port side has a small bathroom and kitchen area , complete with sink, stove, microwave and ice box. It is set up with shore power and can run on Generator as well. It currently has a motor bracket on the back with a 15 HP merc long shaft kicker motor. It has fairly new upholstery throughout as well as a new headliner in the back roof area and new carpet throughout. I completed a full camper enclosure with vinyl windows in the back half. It has a nice stereo and also comes with a porta potty in the bathroom. Tons of storage. The front deck is covered in varnished cedar planking. it has two bilge pumps. It was in the water two seasons and never leaked a drop. It has a mid 70's Johnson 70 HP 3 cylinder motor. That was supposed to be rebuilt but had issues. I know what is wrong with it now. The power head was totally rebuilt and I have the receipt for the job but it has issues. All cylinders have 150 psi compression so the power head is great but now the fuel pump is leaking and apparently a gasket was omitted when the power head was re-installed. So, the engine is not currently running. It has a tandem trailer with newer tires, and surge brakes with a new surge coupler installed. I had an opportunity to pick up a pontoon boat last year so this one is for sale. Its basically almost a new boat. I will be happy to try and answer any questions you may have.
-
22
Mercury 8/9.9/15HP Gearcase
Gear case is in excellent condition ,comes with new impeller,gear oil,and was pressure tested, Send me your motor serial #
Please call or text me 905-687-7675
Location Beamsville
-
23
25HP Motor, year 2000, 3 cylinder ,long shaft, pull start,. parting it out, recoil starter assembly, lower cowlings,3 carbs, fuel pumps, swivel bracket, and more, so if you need parts let me know,
Location Beamsville
Call or text for faster response 905-687-7675
-
24
Needs little TLC. Boat only
-
25
New 13’ single kayaks.
Includes cable operated steering drop down rudder.
Different colours available.
42 lbs.
-
26
If you are looking for a Cowling for an Outboard
Check out the pictures and call or text me for any of the cowling you see in my Ad
Call 1-905-687-7675
-
27
Johnson/Evinrude Carburetor and Intake Manifold,came out of a 30HP Johnson 1993, 2 stroke
You can change your 20HP or 25HP into a 30HP, Carb should fit motors from late 1980's up into the early 2000's
I have a complete 30HP Long shaft Parts motor dismantled. so if you need other parts call me
Please call or text me 905-687-7675
-
28
These gear cases for 4.5 to 9.9/15HP Johnson/Evinrude and Merc are complete and bolt on ready,also have Honda 9.9/15 gear cases to,with new gear oil,and good water pump impellers ,Call or text me with your needs 905-687-7675
-
29
These gearcases will fit Johnson or Evinrude motors,they will fit 7.5/8 HP motors from 1980 to the 2000s. The 9.9/15HP cases fit 1976 up to 1996 ,the 20/25/30HP cases fit from 1985 up to 1996, gear cases are pressure tested before sold,do not come with props,will include new gear oil and water pump impeller,please call or text 905-687-7675
-
30
Single Seat Sit-on-Top Fishing Kayak
1pc Paddle
Height Adjustable Tube Frame Seat
2 trolling rod inserts
1 deck mounted rod holder
1 track mounted rod holder
2 Accessory Tracks (12")
2 hinged storage compartments
Four carry handles with paddle park
Cup holder and cell phone niche
Drain plug and scupper holes with rubber stoppers
Bungee tie-downs over large storage area
Rust resistant stainless steel fittings
SPECIFICATIONS
2.65 m (L) x 0.79 m (W) x 0.4 m (H)
8’8" (L) x 31” (W) x 15.7” (H)
Weight: 21.5 KG (47.4 lbs)
Load Capacity: 120 KG (264.5 lbs)
3.5 mm Linear Low Density Polyethylene (LLDPE) shellStore address is 72 Vienna Rd. Tillsonburg. N4G 3C8
Our Tillsonburg store hours are:
Mon - 9:00 AM to 5:30 PM
Tue - 9:00 AM to 5:30 PM
Wed - 9:00 AM to 5:30 PM
Thu - 9:00 AM to 5:30 PM
Fri - 9:00 AM to 6:00 PM
Sat - 9:00 AM to 4:00 PM
Sun - closedfacebook.com/OtterValleyPaddleSports/
otterpadle.com
519-688-7330
-
31
Looking for an Alumacraft Classic CAMP boat
Tiller or Remote steering
-
32
Recreational Sit-in Kayak complete with pole holders
Great for fishing or for a relaxing paddle.
Price includes deluxe seat and paddle-Deluxe seat
-Two dashboard mounted 360 degree rod holders
-Two rear facing fishing rod inserts
-Watertight storage compartment with twist lock cover
-Rear storage hold with EPDM cover & bulkhead
-Two dashboard integrated cup holders
-Adjustable foot pegs
-Bungee deck rigging
-Paddle park
-Two Grip carry handles
-Drain plugSPECIFICATIONS
-3.05 m (L) x 0.736 m (W) x 0.30 m (H)
-10′ (L) x 29″ (W) x 12″ (H)
-G.W.: 25.7 KG (56.6 lbs)
-Total Load Capacity: 113 KG (249 lbs)
-3.5 mm Linear Low Density Polyethylene (LLDPE) shellAlso have canoes and kayaks from Old Town and Ocean Kayaks at end of season clearance pricing.
We accept Visa, MC, Interac, and COD. Taxes are extra.
Store address is 72 Vienna Rd. Tillsonburg. N4G 3C8
Our Tillsonburg store hours are:
Mon - 9:00 AM to 5:00 PM
Tue - 9:00 AM to 5:00 PM
Wed - 9:00 AM to 5:00 PM
Thu - 9:00 AM to 5:30 PM
Fri - 9:00 AM to 6:00 PM
Sat - 9:00 AM to 4:00 PM
Sun - closedBe sure to click on "View Poster's Other Ads" (above right) to see other models in the Winner line.
Otter Valley Paddle Sports / Robert Jones Marine Technical Services
Delivery available
otterpaddle.com
https://www.facebook.com/OtterValleyPaddleSports
-
33
This boat is in amazing shape, comes complete with a 2002 Honda 90 Four Stroke with power trim. Hummingbird fish finder, 14 rod holders,lots of storage compartments. No issues with the boat at all. Very clean inside and out. 18 foot
-
34
Looking for a boat, imac no mouse or keyboard included, I have deleted The operating system and wiped hard drive. To guatentee my information can not be accessed. Ready for the next person. Can be see on and at main screen
-
35
Hello I am selling a brand new in the box 2 person inflatable kayak package. This set includes everything that is needed to get on the water right away. It comes in a box and within the box is the kayak, a carrying bag for the kayak and all the supplies which include two 86 inch aluminum paddle oars as well as a high capacity pump to make inflating the kayak very easy and quick as it pumps air into the kayak when both being pushed down and pulled up so is super quick to inflate as well as deflate. It also has a removable skeg for directional stability and since it is inflatable, everything is incredibly easy to transport as it is light to carry inflated or deflated and can also fit in the back seat of the smallest car when not inflated. This kayak can also be used as a one person kayak as the seats are adjustable and removable so it does not have to be a two person kayak and you can have tons of free room if you use it as a one person while still being able to maintain control of the kayak and some people even choose to bring their pet or pets along for the ride. You can feel safe in this kayak as it is made of high visibility graphics making it easy to be seen in the water and is also very sturdy as it is made from heavy duty vinyl that is both puncture resistant and UV resistant. It is 10.5 feet and can hold up to 400 pounds so there is room for two grown people as well as storage.
-
36
Nice versatile kayak great on rivers and lakes. Maneuverable, stable hull with retraceable fin (skeg) that makes it easy to paddle straight. Relaxing to paddle in calm water plus stable and fun moving water.
Canadian Made of Triple laminate roto-molded polyethylene. Very tough plus gives it flotation built into the hull so its lighter. Used to train people in kayaking from novice to advanced. New in the Spring only 1 season old. Still covered by 5 year warranty. Have a few available in variety of colours. Retailed for $825, Just reduced price to $425 and included paddle. located in Paris Ontario. 35 minutes west of Hamilton along highway 403
-
37
This is a used panel from a Catalina, 1994. It was working when removed from the boat. It is 9 1/4" high and 29 1/4" long. The double AC breaker is a 20 amp one that should be replaced with a double 30. The phone jack was removed, otherwise it's all there. The switches have been relabeled, they peel off if you don't want them. The volt and amp meters work, includes the shunt for the amp meter. 905 518 8107. I'm in the Grimsby and Hamilton area, I could also arrange a pickup at the Toronto boat show if that works.....
I'm looking for a top notch propane stove on gimbals and a Maxwell foot switch for a windlass
-
38
Boat maybe alil old but runs like a dream.
No soft spots motor freshly tuned up and valve lash adjusted. All the wiring has been checked and everything works as it should.
Comes with ownership for both boat and trailer.
Humming bird fish finder can be added for extra.
Looking to get 3700 obo no hurry to sell if the adds up it’s still available
Would also trade for a diesel truck or a service truck with boxes mounted
-
39
Single Seat Sit-on-Top Fishing Kayak
1pc Paddle
Height Adjustable Tube Frame Seat
2 trolling rod inserts
1 deck mounted rod holder
1 track mounted rod holder
2 Accessory Tracks (12")
2 hinged storage compartments
Four carry handles with paddle park
Cup holder and cell phone niche
Drain plug and scupper holes with rubber stoppers
Bungee tie-downs over large storage area
Rust resistant stainless steel fittings
SPECIFICATIONS
2.65 m (L) x 0.79 m (W) x 0.4 m (H)
8’8" (L) x 31” (W) x 15.7” (H)
Weight: 21.5 KG (47.4 lbs)
Load Capacity: 120 KG (264.5 lbs)
3.5 mm Linear Low Density Polyethylene (LLDPE) shellAlso have canoes and kayaks from Old Town and Ocean Kayaks at end of season clearance pricing.
Store address is 72 Vienna Rd. Tillsonburg. N4G 3C8
Our Tillsonburg store hours are:
Mon - 9:00 AM to 5:30 PM
Tue - 9:00 AM to 5:30 PM
Wed - 9:00 AM to 5:30 PM
Thu - 9:00 AM to 5:30 PM
Fri - 9:00 AM to 6:00 PM
Sat - 9:00 AM to 4:00 PM
Sun - closedfacebook.com/OtterValleyPaddleSports/
otterpadle.com
519-688-7330
-
40
Polaris SL 650cc 1994
(Comes with Papers)
Trailer included
(Comes with Papers)
Has good compression, can be swen running. Your welcome to look it over.
Trades Welcome, Snowmobiles, Atvs, Etc.
$1650 OBO