Cars & vehicles, Boats, watercraft, Other with in Canada, Ontario, Toronto, Oakville / Halton Region.
-
1
91 XP runs good, 580 white motor, good shape for the age. $1500 firm
TXT at 7058902015
Will make bill of sale
-
2
*** Taking orders for the 2023 Spring Season. Order before 12/31/2022 and you'll get the 2022 prices. 2023 prices are expected to rise at least 5%, so place your order early!!
This Paddle Sports Rack was designed to support four paddle boards and/or four kayaks. However, unlike our normal yard racks which are designed to be on your lakefront yard, this rack is designed to attach either to your dock or optionally in an area where access to both sides of a normal yard rack is not possible.
It is made from Eastern White cedar which is an excellent wood for external use and has anti-rotting and anti-insect/termite properties. Ground support blocks are attached to the horizontal bottom supports to keep them out of the moisture in the ground. also extending the longevity of the rack.
The length of the rack is 72 inches, width is 64 inches with 40 inch support arms and the rack is approximately 72 inches high. It is constructed using Mortise and Tenons joints which are glued/screwed to provide the strength to support your kayaks and/or paddleboards. Each arm has been planed so that a 3/8" thick strip of HDPE (aka hockey board) can optionally be attached to prevent any scratches to you paddle sports equipment or the wood support arms.
The support rack can optionally be finished with a marine spar urethane which provides excellent weather protection and allows for the beauty of the cedar to be seen and offers a long lasting beautiful finish.
We also provide anchor supports on each arm as an option, which allows you to secure your paddle sports units to the support rack.
Finally, we can provide ground tie downs for your paddle sport rack. A support rack fully loaded with canoes/kayaks/paddle boards can in effect become a sail in areas exposed to wind. Therefore it is advised that the paddle sport rack be anchored to the ground.
The price quoted is for a support rack with no options. It does not include any staining / urethaning, unit tie down anchors, ground tie down anchors, or the HDPE hockey board on the support arms.Base Support Rack Model: .................................. $1,025.00
Recommended Options:
Spar Urethane Finish (3 coats): ......................... $200.00
Husky Stainless Steel Anchors (20) on Support Arms: ..... $101.92
Ground Anchor System: ................................... $100.00
3/8" High-Density Polyethylene Hockey Board: ............. $80.00
Total Options Cost: ....................................... $481.92
Net Cost of Rack with all the selected Options: ........... $1,506.92
Add HST: .................................................. $195.90
Total Cost of Support Rack with All Options Selected: ..... $1,702.82The customer is encouraged to pick up the rack at our woodshop, but if delivery is required, then we charge $0.75 per kilometer both ways.
So for a total cost of $1,702.82 you can have a complete rack to store your paddle sports equipment in a neat, uncluttered fashion which provides your waterfront eye appeal.
For other items we build, please visit our website at www.grampaswoodshop.ca
We are taking orders for the Spring/Summer 2022 season and will be building the support racks over the winter, limiting the number of racks we are building to 20 this year.
A 50% deposit will be required payable thru an e-transfer to our company email address grampaswoodshop@hotmail.com to secure your order.
-
3
Sylvan 1700 Pro Fish
115 hp mercury 2 stroke oil injected.
8 Hp mercury 4 stroke trolling motor, both motors are linked to the steering, minnkota ipilot with remote and foot controller included, maintenance done every year and stored in climate controlled garage,
2 new marine batteries, built in Noco Genius trickle charger, radio,
Humminbird fish finder.
3 pedestals chairs with 2 back seats, fish life well, rod holders etc..
trailer has swivel hitch to fit in garage.
-
4
2023 Sea-Doo Switch Cruise 21 Neon Yellow 170 hp GET $3,000 OFF
Get $3,000 OFF any in-stock 2023 @seadoo SWITCH or choose 3 year warranty. PLUS get $1,000 OFF accessories when purchasing $5,000 or more. Rebate included in price. Freight, PDI, Commodity and taxes extra.
#seadoo #seadoolife #seadooswitch #pontoon #pontoolife
------------------------------
2023 Sea-Doo Switch Cruise 21 Neon Yellow 170 hp GET $3,000 OFF
-
5
2022 MANITOU AURORA 21 AURORA LE VP II RF
IN STOCK UNIT. RESERVE TODAY FOR YOUR SUMMER ON THE WATER!
21 FT AURORA LE VP II RF
LIMITED PACKAGE:
Silver Tan Luna Flooring (Flooring price is listed separately in the Flooring Section)
Dinette Table
SL 24 Logos
Interior LED Courtesy Lights
In Wall LED Dock Nav Lights
Mid Back Helm Chair
Mid Back Co-Captain Chair
Upgraded Steering Wheel
PORTABLE CUPHOLDERS
DUAL SMART BATTERY
MERCURY 150 XL
$59,999(BOAT + ENGINE) DEALER FEES + TAXES EXTRA
150.0 HP, Length: 21.00 ft
------------------------------
2022 MANITOU AURORA 21 AURORA LE VP II RF
150.0 CV, Longueur: 21.00 ft
Engine: MERCURY 150 XL
-
6
2008 sea doo GTI 155
good tuning condition just gauges are not working
asking $6500
-
7
Replacement cover for MAGMA rail mounted rack. Kayak or SUP (stand up paddle board). They are brand new and custom made out of UV-resistant, water repellent material with velcro closures. Easy to clean and maintain. Easy to replace over the existing original foam. Your rack mounted to your boat will look like brand new. $50 for 1 cover or $70 for a set of 2 (2 pieces). Better than original Magma covers, will last longer. Covers only. The rack showed in pictures is not included. Please do not ask if it is available - if the ad is up - its available. Can ship at the buyer’s cost or pick up.
-
8
Johnson Shipmaster outboard motor controls
Has 2 functions - drive directions and throttle
12-13’ cables
$200
-
9
Alfa one out drive in good shape with controls had engine running but has a noise in the front cover possibly speedo pick up
-
10
Unique and exclusive 38 Foot Houseboat and Floating cottage. This boat has totally unique entertaining and living space and huge top deck - the ultimate family floating cottage and extended-trip cruiser.
Includes:
Super reliable and economical 135 HP Perkins diesel engine.
Fiberglass hull.
New 2x AGM battery system.
New kitchen appliances, fridge and granite countertop.
Beautiful lit cabinets inside, solar lighting outside.
Insured and passed recent certified marine inspection.
Lots of inside living space- room for 2 double beds and more. Huge top deck for lounging and entertaining.Boat is in a slip in Hamilton and ready for viewing by appointment only.
-
11
Tri axle boat trailer 15600 axle capacity
Electric brakes roller trailer 2 5/26 ball
$8500
-
12
These Yakima Kayak Saddles are lightly used and come with all necessary straps.
They fit to either a square or rounded roof rack system.
2 pairs. New is $200 per pair
https://www.rackattack.com/kayak-racks/yakima-deckhand-kayak-saddles/
-
13
Working order ,removed as I got a bigger bowl electric one.
-
14
Waterproof Boat Bimini Top Cover - 67-72"W 3 Bow Bimini Top Canvas Sun Shade Boat Canopy -1" Double Wall Aluminum Frame Tube, 2 Straps 2 Rear Support Poles, Storage Boot -SereneLife SLBT3BK671 (Black)
-
15
This is a used Erickson Personal Watercraft Lifting Sling used with a winch to move a PWC on or off a trailer. Used on units up to 1300 lbs. We no longer require it as we are no longer working on them. Firm on price, cash only, will not deliver. Available by appointment only at
Pisces Marine 1406 Osprey Drive Unit 11, Ancaster, ON L9G 4V5
-
16
Stohlquist pfd's in stock
Models: Edge, Rocker, Drifter, Betsea
$169.99-$199.99
Pick up in person or shipping available across Canada.
We are a family owned and operated canoe retail shop located in Beamsville. Message us for more details or visit our website:
https://www.organicboatshop.com/pfds.html#/
-
17
Selling my 2011 seadoo gts 130 in great condition kept indoors only 45 hours , comes with trailer this model does not come with IBR so please don’t ask , have all paperwork for both trailer and seadoo asking $10,000obo msg me 647 227 2187 for fast response .
-
18
Mechanically and cosmetically restored in 2015. Entire motor was torn down and replaced with NOS or new aftermarket parts and components. Bearings, rings, seals, condensers, spark plug wires, impeller, lower unit seals, any wear parts. Good, even compression on all 4 cylinders. Lower unit resealed last year. Comes with controls and electrical harness for up to an 18' boat. Was used on a vintage tin boat and hasn't seen a lot of use since the restoration. Minor paint chips and some scuffing on the chrome. I am not interested in trades. I will not accept offers unless you see it. Stand not included.
-
19
Had a 9.9hp short shaft(15") outboard on it, very stable and worked as intended. No longer needed it. If ad is up, still available, $75.
-
20
3 x 25 ft Marinco Power Cables in perfect condition 75 dollars each 200 for all 3
-
21
2023 ALUMACRAFT ALUMACRAFT ESCAPE 165 CS
SAVE DURING THE ALUMACASH SALES EVENT
INSTOCK
EQUIPMENT - 65164200
MN 1-23-211-6678 2023 ESCAPE 165 CS CVGE BLK 1
MN 22100024829 PRE-RIG, MERCURY - SURF MOUNT, 11' 1
MN 22100025497 KIT, MERCURY INSTALL, 40-60 HP 1
MN 4-23-050-6141 MERCURY 50ELPT CT FS 1
MN 9-23-100-0107 SHORELANDR TRLR ALV18LN-33 1
MN 9-51-000-0180 FREIGHT TRAILERS
Gasoline, 50.0 HP
------------------------------
2023 ALUMACRAFT ALUMACRAFT ESCAPE 165 CS
Essence, 50.0 CV
Engine: MERCURY 50 ELPT CT FS
-
22
2021 ALUMACRAFT Alumacraft Competitor 205 CS Sport
Demo sale. Boat, + trailer + engine. This Alumacraft Competitor 205 is stunning in blue and black. Set on a an Alumacraft premium trailer and powered by a Mercury 150hp outboard engine. Audio on board. Flip up rear seat. Casting front seat. Side console. Tons of storage and live wells. Carpet in bow. Under 15 hours of use, ver low hours!
25 hours, 150.0 HP, Length: 20.00 ft
------------------------------
2021 ALUMACRAFT Alumacraft Competitor 205 CS Sport
25 heures, 150.0 CV, Longueur: 20.00 ft
Engine: MERCURY 150 PRO XS
-
23
2023 ALUMACRAFT 2023 ALUMACRAFT TROPHY 185 SP
INCOMING - RESERVE IT!
EQUIPMENT - 63053001
MN 1-23-292-2674 2023 TROPHY 185 SP CVGW BLACK
OUR TROPHY SERIES TAKES THE PRIZE
Our fully-loaded Trophy Series, are the top tier in the aluminum fishing boat industry. They offer the performance and the fishing features you can depend on in any angling conditions, while offering the speed and comfort to take on watersports for the days off. Base price show, size, features, options and accessories are extra.
150.0 HP, Length: 18.00 ft
------------------------------
2023 ALUMACRAFT 2023 ALUMACRAFT TROPHY 185 SP
150.0 CV, Longueur: 18.00 ft
Engine: MERCURY 150 XL PRO XS
-
24
2023 ALUMACRAFT 2023 ALUMACRAFT COMPETITOR 185 SP
EQUIPMENT - ORDER 63053001
MN 22100024956 PRE-RIG, MERC - SURFMOUNT,14',150HP 1
MN 22030015296-ACC COVER, TRAVEL (COMP 185 SPT) 1
MN 22030016961-ACC TOP SET,COLLAPSIBLE(COMP175 185SPT) 1
MN 22180016544-ACC PANEL,ANALOG DISPLAY INSRT W GAUGES 1
MN 22990016427 KIT, SPEAKER UPGRADE, 2EA, 2019 1
MN 22990025006 FUEL SEPARATOR KIT, YAMAHA - 10 MIC 1
MN 9-23-100-0194 SHORELANDR CSTM ALV30BNLWMS1-16 1
MN 9-51-000-0180 FREIGHT TRAILERS
150.0 HP
------------------------------
2023 ALUMACRAFT 2023 ALUMACRAFT COMPETITOR 185 SP
150.0 CV
Engine: MERCURY 150 PRO XS
-
25
2021 MERCURY INSTOCK!!! ME 9.9 MXLH CT 4S INSTOCK!!!
INSTOCK!!!
------------------------------
2021 MERCURY INSTOCK!!! ME 9.9 MXLH CT 4S INSTOCK!!!
-
26
2023 ALUMACRAFT 2023 ALUMACRAFT Classic 165 SP
IN-STOCK BOAT, RESERVE IT!
EQUIPMENT - 65164000
MN 1-23-229-6785 2023 CLASSIC 165 SP VGE BLK BLU 1
MN 22100024830 PRE-RIG, MERCURY - SURF MOUNT, 12' 1
MN 22100025498 KIT, MERCURY INSTALL, 75-115 HP 1
MN 4-23-075-6140 MERCURY 75ELPT FS 1
MN 9-23-100-0109 SHORELANDR TRLR ALVE22L-33 1
MN 9-51-000-0180 FREIGHT TRAILERS
Our Classic series sets the standard for traditional aluminum fishing boats with large rod lockers, gear storage, and premium seats. They tow easily and perform perfectly whether you're on a family outing or pitting yourself against particularly wily fish.
images are for reference
75.0 HP
------------------------------
2023 ALUMACRAFT 2023 ALUMACRAFT Classic 165 SP
75.0 CV
Engine: MERCURY 75 ELPT FS
-
27
2021 MERCURY INSTOCK!!! ME 9.9 MLH CT 4S INSTOCK!!!
INSTOCK!!!
------------------------------
2021 MERCURY INSTOCK!!! ME 9.9 MLH CT 4S INSTOCK!!!
-
28
2023 MANITOU CRUISE BENCH
INCOMING UNIT FOR SPRING AND SUMMER 2023. BEAT THE BOAT SHOW RUSH, PRE-ORDER RESERVE YOUR ALL-NEW MANITOU PONTOON BOAT TODAY!
Gasoline, 150.0 HP
------------------------------
2023 MANITOU CRUISE BENCH
Essence, 150.0 CV
Engine: ROTAX
-
29
2023 MANITOU MANITOU PONTOON XT 25 XT
INCOMING UNIT FOR SPRING AND SUMMER 2023. BEAT THE BOAT SHOW RUSH, PRE-ORDER RESERVE YOUR ALL-NEW MANITOU PONTOON BOAT TODAY!
RESERVE THIS 2023 MANITOU PONTOON XT 25
THIS UNIT INCLUDES:
-Signature Package
Package Features:
-JL Ultra Premium Sound System
-Black Sport Tower w Black Bimini
-Silver Luna Flooring-
-Red Tower Accent Panels
-Blackout Red Furniture
-Blackout Red High-Back Helm Chair
-Blackout Red High-Back Port Chair
-Billet: Black
-Charcoal Red Marine Mats
-Fiberglass, Red
-Walls, Matte Black Powder Coat
-Walls, Blackout Graphics
-Mooring Cover, Black
-Blackout Package
-Tower Speakers
-Mercury Dual Engine Prerig
-Mercury JPO Steering
-Battery Charging System
-Garmin Canadian Mapping Card
-Ski Mirror
-Portable Cupholders
Gasoline, 600.0 HP, Length: 25.00 ft
------------------------------
2023 MANITOU MANITOU PONTOON XT 25 XT
Essence, 600.0 CV, Longueur: 25.00 ft
Engine: MERCURY 300 PRO XS
-
30
2021 MERCURY ME 60EXLHPT 4S SP ME 60EXLHPT 4S SP
------------------------------
2021 MERCURY ME 60EXLHPT 4S SP ME 60EXLHPT 4S SP
-
31
Ready to Race! Includes:
-1 2017 J Blue - training sail condition
-1 2019 J Red race sail with Sail Certificate - training sail condition
-1 2022 J Red 2.0 race sail with Sail Certificate - race sail condition. Purchased in October 2022 for South Americans and North Americans (the sail is stamped with both championships)
-Black Gold Spars
-N1 Foils
-Optiparts Dolly (large puncture proof wheels)
-Winner Top and Bottom Cover (top cover professionally repaired by sail manufacturer Triton Sails)
-Winner Foil + Mast Bag
-JSail Sail Bags
-3 New Grey Harken AirBags (purchased Summer 2022)
-Black Rigid Travel Tube
-2 Bailers
-1 Windesign Wind Indicator
-Mast Clamp
-1 Paddle
-Mainsheet and Blocks included
-Winner Tiller Extension
-
32
Great boat only used a few times comes with a mercury 25 hp two stroke engine great condition trolling motor and trailer
-
33
10pcs of 0.8W light set
160 degree Emitting angle
aluminum Alloy housing, 100% anti-corrosion
waterproof connector with 100cm long cable
Waterproof : IP65
Color: Cool White
Can be widely use marine dock, deck, stairs, pathway, gardening
*** Also available in RGB multi-colorPackage includes:
5 pcs of 0.8W led light + 6 to 1 T-connector cable + RF remote + power adapterSee more product on our website or at our store
3505 Laird Rd, #18, Mississauga, ON
weekdays 9:30 to 7pm Sat 9:30 to 2pm
www.maxpowerledlights.com
416-830-5769
-
34
2011 Rinker 260 Winter Price Drop
260 hours
350 Mag Bravo 3
V berth
Queen Aft cabin
Full head with shower
TV
2 fridges
Microwave
AC and Heat
Windlass Anchor
Nav
Lowrance Fish Finder
Seadeck
Winter Storage paid at Oakville Power Boat Club
Super clean everything works
-
35
Yamaha Waverunner Jetski Stage 1, 2 and 3 GP1200R and GP1300R Parts for Sale
I have all sorts of Yamaha aftermarket Stage 1, 2 and 3 parts for sale.
Blackjack carburetors - $1,500
VForce Reeds $650
Advent CDI $625
Riva Rideplate - heavily modified $475
Bullit fixed trim tabs $250
Riva pump reduction nozzle with interchangeable rings - $475
Modified R and D GP1200R 2 bar grate $275
Aftermarket sponsons with R and D blades $275
R and D billet Steering Column and Bars - $575
R Pot hydraulic mechanical trim tabs $575
R Pot front storage box cover $90
Intake Manifold to be used with Boost Bottle $125
OEM flywheel – lightened - non charging $100
Aluminum battery tray $90
Nujet Impeller $275
Used OEM 155 mm impeller liners $125
New aftermarket 155 mm impeller liners $275
Modified OEM pump nozzle $250
Modified OEM rideplate $225
GP1300R fuel pump converted to be used with GP1200R carbs $150
Girdled head bolts $100
Riva Stinger 3 exhaust - $725
Riva Stinger 2 exhaust - $600
Riva Stinger 1 exhaust - $300
Protec modified OEM CDI $225
Billet driveshaft coupler (qty 1) $100
GP1200 Fluid Dampner $450Complete GP1200R race ski – 1500 cc big bore motor, triple pipes, etc. etc. etc. $12,000
Please see my other ads for GP1200R GP1300R and XL1200 OEM parts.
Please see my other ads for Yamaha 4 stroke aftermarket parts.
Waverunner Jetski 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 GPR1200 GPR1300 GP1200
-
36
Lamp Power: 12W
Solar panel: 40w/13.5v
Lithium battery: 10Ah/9.6v
LED: 12pcs Bridgelux leds
Brightness: 1500-1800lm
Color temperature: 6000K
CRI: >70Ra
Light control voltage: 1V
Illumination (stand by): 30%
Microwave Motion Sensor area: <10meters
Delay time: 20s
Charge time(full sunlight): 4hrs
Working temperature: -20 - 60 degree celsius
LED lifetime: >50,000hrs
Housing: High quality die-cast aluminum alloy
Mounting height: recommend 3 to 6 meters
Installation spacing: 8 to 10 meters
Long time working continuously for 2-3 cloudy days12W (1500-1800lm)
20W (2500-2800lm)Please contact
416-830-5769
www.maxpowerledlights.com
-
37
Selling my 2018 Seadoo spark trixx 900, it runs and rides amazing never given me any problems always winterized and stored for the winter. It has a Rivia racing exhaust and water box mod with a tune making 110-120 hp while sounding amazing on the water. Comes on 2018 move trailer in great condition with travel cover and front storage bin
Asking $14000 obo
Pickup in Georgetown
-
38
Pacer bilge pump
-
39
2006 Monterey 270 SC, cabin cruiser. Powered by a Volvo Penta 8.1 Gi and Duo Prop Drive with 235hrs. This Boat Comes Packed with Features including Kohler Generator with 125hrs, Captains Bench Seat That Turns Into A Lay Flat Lounger, Garmin GPS, Cockpit Sink, Transom Shower, Windlass Anchor, and Walk Thru Windshield. Down In the Cabin There is a Forward Convertible Dinette that Turns into a V-Berth, 4 Piece Kitchenette with Fridge, Sink, Microwave and Cook Top, Spacious Aft Cabin, Private Head and Heat. & Air Conditioning. Boat Comes With Full Camper Top, Tonneau Cover and 2014 Excalibur Tri Axle Trailer!! Get Cruising in Style Summer 2023
-
40
This is a collection of used service manuals for Personal Water Craft. A great gift for someone that repairs them. Selling as a collection, will not break up. Will not ship, will not deliver, firm on price, cash only. Available by appointment only at Pisces Marine, 441 Wyecroft Road, Oakville, ON L6K 2H2. info@piscesmarine.ca
-
41
I am looking for an Aristocraft boat, any year and model.
Please contact me if you have one for sale.
-
42
I was going to make one - but thought i would see if anyone has one.
Please text to let me know
-
43
Lamp Power: 12W
Solar panel: 40w/13.5v
Lithium battery: 10Ah/9.6v
LED: 12pcs Bridgelux leds
Brightness: 1500-1800lm
Color temperature: 6000K
CRI: >70Ra
Light control voltage: 1V
Illumination (stand by): 30%
Microwave Motion Sensor area: <10meters
Delay time: 20s
Charge time(full sunlight): 4hrs
Working temperature: -20 - 60 degree celsius
LED lifetime: >50,000hrs
Housing: High quality die-cast aluminum alloy
Mounting height: recommend 3 to 6 meters
Installation spacing: 8 to 10 meters
Long time working continuously for 2-3 cloudy days12W (1500-1800lm)
20W (2500-2800lm)Please contact
416-830-5769
www.maxpowerledlights.com
-
44
'We Offer Contactless Purchase and Pick-up'
'We ship and can deliver'HEAVY-DUTY New Trailers, comes with all of the proper paperwork to license your trailer. Our trailers meet or exceed all necessary requirements needed to obtain proper ownership and title from the Ministry of Transportation. *C.S.A and D.O.T compliant.
We are located in Milton Ontario (James Snow and 401) L9T6M5!
Please call or text for an appointment ahead of time, our hours are flexible Jeff at 4169128413
Our trailers are used for:
Utility purposes such as transporting things like dry wall, lumber and anything you can think of, and hauling dirt bikes, motorcycles, ATVs, boats, kayaks, snowmobiles, sleds, skidoos, seadoos, tear drop trailers, and much more!For a free on-line quote (use a PC) that you can create yourself visit www.htstrailers.com/quote.
Flat Bed 2000 lbs Capacity Folding Trailers:
4'x8' Trailers: $694.69
• 4'x8' Durable Black Powder Coat
• 4'x8' Rust Resistant Hot Dipped Galvanized5'x8' Trailers: $796.46
• 5’x8’ Durable Black Powder Coat
• 5'x8' Rust Resistant Hot Dipped GalvanizedGalvanized Boat Trailer $849.56
1200 lbs capacity, extra long tongue, 12 inch tires 1050lbs capacity a tire, free winchFits many personal watercraft up 13.5’-14’ long (depends upon style of boat)
see website for more details www.htstrailers.comFolding Trailer Attributes:
Tilts to ground, foldable, when folded is 6’ high from ground which makes it easily storable in low ceiling spaces, folds onto permanent movable castor wheels for easy transport. Made of heavy-duty steel frame with curled edges and solid axle for added strength; coatings are very durable. When folded up, water rolls off this trailer so to avoid excess rust. Takes up just only 2 feet of depth of space when folded, Heavy-duty 3 Leaf axle springs for heavy loads, frame has built-in stakes for sidewall assembly.For more details on specifications please fee free to visit our website www.htstrailers.com/specifications.
Trailers Come With:
Full trailer frame, 2 tires, class II coupler and chain, license plate holder, 4 flat wire connection, hardware for the trailer frame, LED lights, comes with an electrical package but we recommend our grounding upgrade kit for fool proof grounding, larger 5 bolt wheel design 12” wheels 5.3” diameter 1050 lbs capacity a tire, cast hubs, LED lights, folding A frame (for folding trailer design only).Trailer Accessories:
If someone can beat us on price, we don’t sell it! We pride ourselves in great value…trailer accessories well suited for our trailers with best price, quality, and safety in mind! We offer a full range of trailer accessories such as: upgraded grounding electrical kit, zinc coated/nylon lock nut floor hardware kit, coupler swivel jack, d-rings for strapping your load, anchors to keep the trailer closed for when storing, coupler lock, motorcycle wheel chocks, ramp ends, rubber stoppers to protect the underside of your trailer for tilt to ground, a watercraft hardware kit to mount your watercraft on the flat bed trailer for ultimate versatility, side wall accessories and wood kits and much more……!
Visit our website for full details www.htstrailers.com/accessoriesBuild Yourself:
We have a step-by-step trailer assembly video and PDF version if you prefer, see how easy assembly is before you purchase www.htstrailers.com/assembly. Minimal tools needed for assembly: socket set, wrench, screwdriver. Takes about half a day or less to assembly depending upon skill level. We do provide over the phone support when necessary.Purchase Assembly:
For a fee our certified Mechanical Technologist ensures a great assembled trailer. Comes with a completely assembled frame with all the proper torquing and tire pressure! We insist that you also purchase our electrical upgrade, to ensure fool proof grounding of all lights back to the electrical source; not just that but this professional solders all seams with marine grade heat shrink and wraps the wires in plastic sheathing to protect the wires from the elements and is carefully adhered to the trailer frame with hangers which allows enough slack to fold the trailer properly.Contactless Pick-up in Milton or have it shipped to your preferred location:
Please call ahead of time and book an appointment to come out and see our assembled displays and pick-up the trailer if you desire with no contact. The unassembled trailers will fit in any small compact vehicle with the seat folded down. We will load the boxes and accessories into your vehicle for you. Alternatively, you can call or text with your postal code for a shipping quote.We check every box for components prior to every sale, to ensure you are getting what you paid for.
Methods of Payment:
Cash, e-transfer (showing proof of transaction confirmation), debit, and credit card (3% processing fees charged by the credit card companies).Commonly Asked Questions:
Q: Does the trailer come assembled?
A: No, it does not. This is a complete trailer kit that is ready to be assembled. Assembly available ask for a quote.Q: Does the trailer come in a box? What is the size of the boxes of the trailer kit?
A: There are 3 boxes with dimensions of:4'x8' Folding Trailer Boxes:
Box A: 62” x 10” x 5” :106 lbs
Box B: 51” x 8” x 5” :78 lbs
Box C: 27” x 23” x 12” :102 lbs
Note: I have loaded these into many compact cars. If you can fit a hockey bag and sticks, you can easily fit this trailer kit.5'x8' Folding Trailer Boxes:
Box A: 74” x 10” x 5’ :106 lbs
Box B: 62” x 7” x 5” :82 lbs
Box C: 27” x 23” x 12” :102 lbsBoat Trailer Boxes:
Unfortunately, we can’t ship the boat trailer since the boxes are too large and flimsy. We will open the boxes and show you the quality of the product and load each piece is loaded into your vehicle.Q: How long does it take to assemble?
A: It takes about half a day and sometimes less (depending on your skill level and the tools that you have)Q: Where are you located?
A: Milton, Ontario (James Snow and 401)
Q: What forms of payment do you accept?
A: Cash, E-Transfer, and Credit Card (3% convenience fee for credit card use)Q: Is the trailer still available?
A: I always have trailers in stock.Q: How does the tilt feature work?
A: With the removal of quick release pins on the trailer's 'A ' frame, the trailer can be easily tilted for loading.
This will work with or without the trailer attached to your vehicle.Q: Do you have a trailer that I can view?
A: Yes, I have trailers available to view.Q: What are your viewing hours?
A: By appointment; we are flexible. Please call, text or email.Q: What receiver ball size does the trailer require?
A: The trailers require a 2” diameter ball.Q: Will you get me my trailer license?
A: No, you will need to make arrangements to visit the Ministry of Transportation (MTO); it is a straightforward and simple process.
I provide you with all necessary LEGAL documentation; I can explain the process and guarantee that there will not be any headaches for you. You have the option to pay for the trailer and take the paperwork to the licensing office during business hours and come back with your plate so you can drive away with your assembled trailer.Q: What are my costs to purchase my license plate at the licensing office?
A: The cost to purchase your license plate at the licensing office is approx. $65.
You show your official NVIS and Bill of Sale documents (that we provide to you) and you purchase your plate hassle-free from the licensing office. All of the taxes and duties for the trailer have already been paid when you purchase the trailer from us. Make sure that the MTO only charges you for your license plate.Q: What is the trailer size when folded?
A: The bed size of the folding trailers are a true 4’x8’ and 5’x8’ deck size, with approximately 1” on either side to the fender.
However, we have a side rail kit that allows you to build the trailer walls to the outside of the trailer bed; so you can utilize the full bed size to transport your load.
You can further reduce the trailer's footprint by removing the trailers' wheels and/or tongue assembly. There are many options.Thanks Jeff (416) 912-8413
www.htstrailers.comShipping and taxes apply
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. folding boat trailer, folding utility trailer, dirt bike trailer, fold up boat trailer, folding trailers for sale,
fold up utility trailer, foldable trailers, utility trailers for sale, boat trailers for sale, folding trailers, fold-up trailer, flat deck trailer, galvanized trailer, galvanized folding trailer, galvanized utility trailer, ATV trailer, quad trailer side by side trailer, sled trailer, skidoo trailer, seadoo trailer, Remorque utilitaire, stinger, freedom
-
45
We still have a few spaces for indoor and outdoor boat storage. Outdoor prices starting from $50/month and indoor starting from $125/month. Price varies by length of boat. Please contact us for exact pricing. All articles are stored on our Premesis with 24 hour video surveillance. Shrinkwrap service also available. No in and out privilages for boats during winter months. Boats are usually locked in place until April 17th, 2019 with 2 weeks notice for removal. Current Special-Prepay 6 months get the 7th free
Pisces Marine Ltd
441 Wyecroft Road Oakville, ON L6K 2H2
905-827-4384
http://www.piscesmarine.ca
-
46
WE OFFER BOAT ON TRAILER OUTSIDE AND INSIDE STORAGE IN OAKVILLE AT A MONTHLY FEE. THE BOAT WOULD BE LOCKED IN OUR SECURED COMPOUND WITH 24 HOUR VIDEO SURVEILANCE. WHY RISK LEAVING IT IN AN OPEN YARD WHERE PEOPLE WILL HELP THEMSELVES TO YOUR BOAT PARTS OR WORSE. A COMPLETED STORAGE CONTRACT IS REQUIRED ACCESS TO TRAILER AT REGULAR BUSINESS HOURS UNLESS A LOCK AND KEY IS PROVIDED AND WE ARE NOTIFIED AHEAD OF TIME TO LEAVE IT OUTSIDE THE GATE. WINTER MONTHS MUST BE PREPAID IN ADVANCE. PLEASE SEND YOUR BOATS LENGTH AND WIDTH FOR A QUOTE OR CALL US WITH THIS INFORMATION AT 905-827-4384. MINIMUM $50/MONTH CHARGE. WE ALSO STORE MOTORCYCLES!
http://www.PISCESMARINE.CA
441 WYECROFT ROAD
OAKVILLE
-
47
4pcs of RBG CREE light set
DC 9-32V (built-in Driver)
150 degree Emitting angle
aluminum Alloy housing, 100% anti-corrosion
waterproof connector with 13ft long cable
with 2 sets of rubber pads (flat, arcs)
Waterproof : IP68
Color: RGB multi color
bluetooth control by smart phone
Total Light Output: 716LM
50,000hrs life span
Can be widely use under vehicle body, boat, ATV, UTV, under water8 PODs rock lights for $199
6.5" 36W CREE led ight bar - flood $53
13.5" 72W CREE led light bar $99
22" 120W CREE led light bar $110
32" curved CREE led light bar $179
32" 180W led light bar white/amber w/ 6 strobe pattern $180
42" 240W led light bar $149
52" 300W led light bar $199
50" 288W led light bar $199
50" 288W curved CREE led light bar $259See more product on our website or at our store
3505 Laird Rd, #18, Mississauga, ON
weekdays 9:30 to 7pm Sat 9:30 to 2pm
www.maxpowerledlights.com
416-830-5769
-
48
Immaculate RIB boat, only one of its kind and colour in Canada. Does not sit in still dirty water so nice bottom gel coat.
Pictures of my boat taken in July 2020 and 2 pictures of prices, one in USD from other boat ads with same boat without any extra items.
Not sure the exact hours on the Yamaha 70hp but around 147 I think. Enjoyed 1-2 weeks a year for 7 years. No issues, professionally maintained and always garage stored inside. Excellent trailer all working perfectly. I am moving in a year and thinking of getting a larger 680-700. Max capacity around 2000 lbs or 9 people but it can hold 15 and drop only an inch in the water. All can sit on tubes on one side without tipping it. Same as used by search and rescue and I’ve had it in Lake Ontario in the worst storms when only the police RIB was out there besides me. Was used as chase boat for a swim across Lake Ontario and have the parade pictures.
- 5 tube chambers with equal pressure system making it unsinkable
- Two aluminum 13” props- one for torque and one for speed.
- Yamaha gauges for trim, fuel gauge, rpm speed etc
- Raymarine GPS, fish sonar and Chirp sonar.
- Turboswing tow bar, the best you can get
- transom Arch with navigation lights
- two speaker radio
- numerous anchors, tool kit, electric pump, all mandatory safety Items and storage bags
- Excellent custom full cover easy on and off For trailering or storage
- trailer has new spare tire just in casePerfect as a main boat or a yacht tender. My cost of premium gas per year is about $300.
Fits in a 20’ garage with rear nav light in the down position but with a 7’ door (due to some variation in height) you might need to swing it up to get it in and it’s easy to do.Numerous tubes and tow ropes also available
Currently stored at Pisces marine Oakville since we are doing renovations.Paid $36,000 back then and optioned as it is now around $40k CAD - selling $24,000 all in.
-
49
Brand new serpentine belt for Ilmor 5.7L V8
-
50
WANTED..... I am looking for a damaged Yamaha Waverunner.
Specifically, I am in search of a complete driveline including engine, computer, jet pump, instrumentation. Not too old but engine must be a four stroke HO or SHO in working condition.
I am willing to pay a fair price for your damaged or salvaged watercraft.