or
Filters Cars & vehicles, Heavy equipment with in Canada, British Columbia, Prince George.
-
1
REDUCED
New Mini excavator attachments , 25mm/1” pin diameter fits many 1-3 ton size minis
Pin grabber quick coupler (allows you to reverse buckets as well) - $400
Ripper tooth- $300 Sold
8” trenching bucket w/teeth - $400 sold
20” clean up smooth edge bucket - $500 sold
32” smooth landscape bucket - $600 sold
32” hydraulic angle bucket -sold
Hydraulic Auger post hole drive $900 Sold
8”sold ,12”sold,16” auger bits - $100/125/150 each -Sold
Brush rake- $400 sold
Grapple attachment - $350 One left
But individual or package deals
-
2
2008 Kubota KX 121 angle float blade 4300 hours on it this machine is fantastic it is one reliable machine it has never let me down I bought new tracks for a while back absolutely awesome machine
- 3
-
4
2011 Peterbilt 388. Motor rebuilt 100,000 KM on it. Back rear end 200,00 KM on it. Front rear end, transmission and clutch 10,000 km on them. New roo bumber, New compressor. Turbo new. Rad and air to air done. Truck rebuilt headlights to tail lights. 1.7 KM. For more info call Bob at 780-404-3460.
-
5
TNT Attachments
780-591-5199
Excavator Attachments
Top quality Design Strength & PerformanceWe build
Excavator =
Wrist/tilt buckets
Chuck blades
Cleanup and digging buckets
Skeleton buckets
Frost buckets
V buckets
Brush rakes
Root rakes
Scoop rakes
Trenching spoons
Ripper shanks
Stump rippers
Fence rollers
Gravel spoons
Bolt on top mounts
Blank ears / lugging
Matt grapples
Auger hangers
Pallet forks
Excavator to skidsteer adaptors
And much much moreSkidsteer =
Snow pushers
Snow Buckets
Tooth & smooth buckets
Mat grapple
Adapter plates
Fence rollers
Gravel spoons
And much morePlease feel free to message for pricing and availability on any attachments you need. Looking to purchase more than one? Let us know we do package deal pricing!
Warranty on all new attachments
We ship Canada wide
Tags:
Wrist bucket tilt bucket ripper shank digging bucket clean up bucket brush rake root rake Chuck blade pallet forks mini excavator caterpillar John Deere case komatsu hitachi yanmar sany bobcat
- 6
-
7
For sale clean low hour johndeer 35d one owner since new 1550 hrs seen very light use c/w dig bucket cleanup bucket and thumb tracks and bottom rollers replaced in the last 100 hrs extremely well maintained machine will consider trade for a newer ford or Chevy diesel pickup
-
8
Parting out McCoy gravel box 151/2foot mechanical 8000 425 cat engine 7000 46 rears back locks up rest off truck make offers call 2506172783 2509625599 leave message
-
9
Imagine cutting firewood with the music on, drinking a coffee, and in a nice warm cab of your skid steer or tractor. Now that's possible with a Halverson firewood Processor.
Perfect for light commercial and residential use, the HWP-120 & HWP-140B Skid Steer Firewood Processors of Halverson Wood Products, truly make the job hassle-free. When attached to a skid steer or other equipment, it enables the operator to easily and efficiently perform wood cutting and splitting tasks.
Works on any just about any machine producing a minimum gph of 15 and a skid steer mounting plate.
Available for sale processors, grapple saw inverted splitters and log grapples.
The new HP 150 is also now availible. Its able to handle 21" wide logs and has a hydraulic operated splitting wedge.
Located in Ontario however i will ship Canada wide and have units in stock. Pre covid customer service.
Financing available please see.lin
k below.
I have log loader trailer, log grapple and root rakes. I am your one stop log shop
https://canadian-financial.ca/brian-troy/woodprorileyequipment
-
10
2020 Doepker hay rack , used one summer and one winter. Like new condition.For rent or sale. 2750 per month rent. 10-6 bunks , heavy duty frame for off highway use.
-
11
Jx1060c Case tractor with quick attach loader and bucket. 1420 hours on machine.
Everything works as it should, tires good.
3 cylinder diesel engine, 4 gears, 4 ranges.
Ac and cab heater work, all lights work.
Call 250 617 7852 if interested, thanks.
Can't up load pics, text me if interested and I will send you pictures.
-
12
2012 Mack Titan
582,000 km going up as truck still working
Good Rubber
New box Stringers and floor
Deleted
Rawhide interior
18 spd eaton1 locker
Beautiful truck in and out
Fresh CVI on truck
1996 langfab tandem pup
-
13
Tractor chains 27 wide x110 long
-
14
Kenworth t800
Strong running cat c15 6nz
18 speed
Truck has all new suspension bushings and shocks
Brand new starter
Brand new steer tires
Brand new batteries
Brand new ac compressor
Fresh inspection done Feb,22/2024
-
15
Couple sets of new tripples
11r22.5 tire chains. 8mm. Also have new set of 32" dynaline chain plyers for sale.
-
16
I have 4 New sprockets for a hitachi 350. Also fits jd 290f, jd 2954. 550 each. Open to offers
-
17
2011 388 Peterbilt. 244 wheel base. 370 gears. Motor rebuilt top to bottom last year. new clutch and transmission, front rear end, 2 months ago. Bach rear end 1 year ago. New compressor, high pressure fuel pump, turb and actuator and fan hub. Truck is located in Prince George, BC. For more info call Bob. 780-404-3460
-
18
Hydraulic Quick Attach for Case 521 or 544 Deere - CWS
WE SHIP DIRECT TO YOU, USA and Worldwide!! Financing Available
• Stock Number: 8100 BP
• Location: Central Alberta Area
• Fits To: Case 521 Wheel Loader or Deere 544 Wheel Loader
• Condition: New - never used
• Product: WL200 QC Loader
• Weight: 400 lbs est.
• Wheel Loader Quick Coupler
• Contact us today if you need more information. • JPH Equipment • Buying Made Simple • We Ship Worldwide
• We do not guarantee that these specifications are error free or fully complete. The above specifications details are provided as reference only and should be confirmed prior to purchase.
-
19
63 inch . Used a few times
-
20
2020 Krone Swadro TC880 Rake
WE SHIP DIRECT TO YOU, USA and Worldwide!! Financing Available
• Stock Number: 7991 BP
• Location: Southern Alberta
• 10 Acres Use
• Operating Weight: 5,071 lbs (2,300 kg)
• Total working Width is 7,60 m 8,80 m
• Tire Size: 15.0 55-17
• Rotor Height Control
• Minimum Tractor Input: 55 hp
• See Brochure on Our Website
• Contact us today if you need more information. • JPH Equipment • Buying Made Simple • We Ship Worldwide
• We do not guarantee that these specifications are error free or fully complete. The above specifications details are provided as reference only and should be confirmed prior to purchase.
-
21
Hours: 12135 | Location: Fort St John, BC, CA | Blades: 14' Blade; Operators Station: Cab w AC; Operators Station: Low Cab; Powertrain: All Wheel Drive; Tires: 17.50 Tires;
Brandt delivers Canada's #1 used equipment inventory for all the industries we serve, backed by the best-trained, most committed after-sales support team in the business.
For complete listing details and to view our full inventory, visit www.brandt.ca/Products/Used-Equipment
Did you know that Brandt BUYS used equipment as well? If you have heavy equipment you are looking to sell or consign, email sales@brandt.ca and we will connect you with a rep in your area!
Products may differ slightly from how depicted in any illustrations, photography or descriptions on Brandt’s website. Brandt has made every effort to display as accurately as possible the products as they appear on its website, but the actual product may change or be discontinued at any time.
-
22
* 2016 Peterbilt 367 Tridem Dump/ Gravel Truck
* Deleted Cummins 550Hp, 18 Speed Automatic Transmission and 2050 Torque.
* 480000km and 12800hrs
* Hardox Langfab Box.
* 68000km after Inframe(Done by Dealership).
* Transmission and Clutch Replaced last month still under warranty.
* Truck is in Delta, BC and Ready to work next day.TEXT FOR MORE DETAILS ON 6042622462
-
23
1980 Cat 631D Wheel Motor Scraper
WE SHIP DIRECT TO YOU, USA and Worldwide!! Financing Available
• Stock Number: 7993 AS
• Location: Calgary
• Hours: Showing 21,076
• Engine: 3408
• 450 flywheel hp
• Tires: 37.25R35
• Operating weight, empty 39,240 kg 86,500 lb
• Maximum depth of cut 19in.
• Width of cut (outside router bits) 11'5.5in.
• 21 cu. yd. (16.1 mr) capacity
• Contact us today if you need more information. • JPH Equipment • Buying Made Simple • We Ship Worldwide
• We do not guarantee that these specifications are error free or fully complete. The above specifications details are provided as reference only and should be confirmed prior to purchase.
-
24
I have a case 850b for rent. Daily and weekly rental available.
-
25
2008 Peterbilt PB340 Heavy Truck & Watson 1100TM Foundation Pile Drill
WE SHIP DIRECT TO YOU, USA and Worldwide!! Financing Available
• Stock Number: 6676 BP
• Location: Southern Alberta Area
• Truck: 330 hp Paccar PX-8 Diesel Engine • Drill: 139 hp John Deere 4045 Diesel Engine
• 1100 Watson Foundation Drill
• GVW: 24,000 kg • Tare: 19,300 kg
• CVIP Expiry: June 2023
• Front Tires: 385 65R22.5 • Rear Tires: 11R22.5
• Truck Hours: 4,563 • Drill hours: 6,514
• 73,092 kms • 13 Speed Manual Eaton Fuller Transmission
• Axle ratio: 4.88 • Full Lockers • Wheelbase: 194in.
• Truck & Drill Engine EPA Labels Present • Canadian Completion Label
• 1100 Watson Drill Specifications:
• Torque 40,600 Ib-ft, Recommended Drill Diameter 24-48 in
• Crowd Down
• Pull up 21,700 » 10,000 Ibs
• Kelly Winch Line Pull 18,000 lbs
• Kelly Winch Line Speed
• Cable Size 160 ft min
• 5 8in. dia
• Service Winch Line Pull
• Cable Size 4,500 lbs
• 1 2in. dia
• Engine (John Deere) 4045H, Power 140 HP
• 1100 Standard Features:
• Rotary.- Single reduction with heavy-duty spiral bevel ring gear and pinion (Mechanical).
• Box type structure. Mast is elevated with two hydraulic cylinders allowing positioning 10° past vertical and 10° on each side.
• Kelly - Telescoping multi-element. Customized Kelly stub per customer specification.
• Kelly Winch - Controlled freefall when lowering and 2-speed, 18,000 Ib. raise.
• Service Winch - 4,500 Ib. power-up power-down.
• Rotating Frame ~ Rotation provided by a hydraulic motor and planetary with integral braking system. Enables 360° swing on crawler rigs.
• Slide Frame - 24in. slide (36in. on Hydraulic) increases maximum drill radius up to 118° (9° 10in.).
• Truck Mount (TM) - 6x4 truck, typical gross vehicle weight (GVW) rating Is 54,000, a Dies
• Base Frame Outriggers - Outriggers are out down on cab end and stabilizers on drill end, Outriggers are powered by upper unit and
controls are at operator's station (Truck Only)
• A C
• Comes with a Watson Drill Manuals & Drawings
• See videos on our website
• Truck Engine Just Rebuilt - 2023 05 08
• Max Drill Depth: 50ft
Previously registered in SK
• Contact us today if you need more information. • JPH Equipment • Buying Made Simple • We Ship Worldwide •
We do not guarantee that these specifications are error-free or fully complete. The above specifications details are provided as a reference only and should be confirmed prior to purchase.
-
26
1990 Ford C8000 Superior Pumper Engine
WE SHIP DIRECT TO YOU, USA and Worldwide!! Financing Available
• Stock Number: 8099 AS
• Location: South Central Alberta
• Engine: Cat 3298
• 250 hp
• 28,806 km
• 2007 hrs
• 1990 Waterous CM YBX water pump
• Pump: 382 hrs
• GVWR: 35,000 lbs
• Wheel Base 175
• Wheels 11R22.5
• Parked inside entire life
• Air Brakes
• Automatic
• Contact us today if you need more information. • JPH Equipment • Buying Made Simple • We Ship Worldwide
• We do not guarantee that these specifications are error free or fully complete. The above specifications details are provided as reference only and should be confirmed prior to purchase.
-
27
1482 hours, 75,000 kms on new Remack Engine (E7 AI-460). Total 18,720 hrs, 18 speed, Mack Rears, 15' Nahanni Box (repainted 2022) with hi lift gate, lots of new parts with new engine. Pre emissions, E7 engine will last for a million miles, truck will last for decades, current CVI, Feb 2024, Well maintained by owner. Located near McBride BC.
-
28
2007 American Hauler Office Cargo Trailer
WE SHIP DIRECT TO YOU, USA and Worldwide!! Financing Available
• Stock Number: DEW9F3 AS
• Location: Southern Alberta
• GAWR 1,587 KG ( 3,500LB) x 2
• GVWR 7,000 LBS
• Coupler Size 5 16''
• Tires ST225 75R15
• Total Length 23 ft
• Stove
• Mini Fridge
• Microwave
• Water faucet
• Contact us today if you need more information. • JPH Equipment • Buying Made Simple • We Ship Worldwide •
We do not guarantee that these specifications are error-free or fully complete. The above specifications details are provided as a reference only and should be confirmed prior to purchase.
-
29
CAT 301, 303.5, 304
20/30 series
New 36" wide bucket
:clean up bucket, bolt on double sided wear edge
:wedge coupler
:IF add is still up still for sale
coupler is for cat, bucket may fit other brands, :Buyer would have to contact EFI for coupler fitment #
Trade for cash only
-
30
2012 Caterpillar 140M2 AWD Motor Grader
WE SHIP DIRECT TO YOU, USA and Worldwide!! Financing Available
• Stock Number: 8153 BP
• Location: South Central Alberta
• 246 hp - Caterpillar C9.3 Diesel Engine
• Standard Operating Weight: 43,686 lbs
• Hours: 9,916
• Tire Size: 17.5R25
• Caterpillar 140M2 AWD VHP Plus
• Moldboard Length: 14ft Moldboard with 2ft Extension
• Drive: AWD
• EPA Label Present
• See Video and Brochure on our Website
• Contact us today if you need more information. • JPH Equipment • Buying Made Simple • We Ship Worldwide •
We do not guarantee that these specifications are error-free or fully complete. The above specifications details are provided as a reference only and should be confirmed prior to purchase.
-
31
Allied 1600 Excavator Ho-pac Tamper Compactor
WE SHIP DIRECT TO YOU, USA and Worldwide!! Financing Available
• Stock Number: 10152 JPH
• Located in Southern Alberta
• Allied 1600 Ho-Pac
• 1600 lbs impulse force
• Recommended carrier weight 19,000-45,000 lbs
• 2100 cycles minute
• Coupler to fit 200, 250 and 300 series excavator as required at extra cost
• Contact us today if you need more information. • JPH Equipment • Buying Made Simple • We Ship Worldwide •
We do not guarantee that these specifications are error-free or fully complete. The above specifications details are provided as a reference only and should be confirmed prior to purchase.
-
32
2017 Komatsu PC228USLC-10 Zero Tail Swing Excavator
WE SHIP DIRECT TO YOU, USA and Worldwide!! Financing Available
• Stock Number: EC9 JPH
• Located in Claresholm Yard
• 158 hp
• 55,000 lbs operating weight
• 8085 hours
• 31 inch Pads
• 9'7in. Stick
• Hydraulic wedge Coupler 200 series WBM Lug
• 36 inch dig, 60in. clean up available for extra $5000
• HKX Hydraulic Kit H82179
• Meets EPA can easily ship to USA
• Contact us today if you need more information. • JPH Equipment • Buying Made Simple • We Ship Worldwide •
We do not guarantee that these specifications are error-free or fully complete. The above specifications details are provided as a reference only and should be confirmed prior to purchase.
-
33
Brand new 7" wide non polished fuel tank strap with step mounts. Fits a 24.5 inch diameter tank. $500
-
34
Brand new fuel tank mount brackets. Part # in the picture. Fits 24.5 inch diameter tank. $500 each, 2 available
-
35
Jx1060c Case tractor with quick attach loader and bucket. 1420 hours on machine.
Everything works as it should, tires good.
3 cylinder diesel engine, 4 gears, 4 ranges.
Ac and cab heater work, all lights work.
Call 250 617 7852 if interested, thanks.
Can't up load pics, text me if interested and I will send you pictures.
-
36
Skid Steer Auger Bit 24 inch
WE SHIP DIRECT TO YOU, USA and Worldwide!! Financing Available
• Stock Number: 10070 JPH
• Located in Claresholm Yard
• Skid Steer Auger Bit 24in.
• Contact us today if you need more information. • JPH Equipment • Buying Made Simple • We Ship Worldwide
• We do not guarantee that these specifications are error free or fully complete. The above specifications details are provided as reference only and should be confirmed prior to purchase.
-
37
300 Series Trench Bucket 36in. WBM
WE SHIP DIRECT TO YOU, USA and Worldwide!! Financing Available
• Stock Number: 8042 BP
• Location: Southern Alberta
• 3ft Trench Bucket
• Weight: 3000 lbs est.
• WBM 36in. Trench Bucket
• Contact us today if you need more information. • JPH Equipment • Buying Made Simple • We Ship Worldwide
• We do not guarantee that these specifications are error free or fully complete. The above specifications details are provided as reference only and should be confirmed prior to purchase.
-
38
new 3 months old works great
-
39
2003 d5gxl with low hours , 6 way blade run excellent
-
40
TNT Attachments
780-591-5199
Excavator Attachments
Top quality Design Strength & PerformanceWe build
Excavator =
Wrist/tilt buckets
Chuck blades
Cleanup and digging buckets
Skeleton buckets
Frost buckets
V buckets
Brush rakes
Root rakes
Scoop rakes
Trenching spoons
Ripper shanks
Stump rippers
Fence rollers
Gravel spoons
Bolt on top mounts
Blank ears / lugging
Matt grapples
Auger hangers
Pallet forks
Excavator to skidsteer adaptors
And much much moreSkidsteer =
Snow pushers
Snow Buckets
Tooth & smooth buckets
Mat grapple
Adapter plates
Fence rollers
Gravel spoons
And much morePlease feel free to message for pricing and availability on any attachments you need. Looking to purchase more than one? Let us know we do package deal pricing!
Warranty on all new attachments
We ship Canada wide
Tags:
Wrist bucket tilt bucket ripper shank digging bucket clean up bucket brush rake root rake Chuck blade pallet forks mini excavator caterpillar John Deere case komatsu hitachi yanmar sany bobcat
-
41
2015 Volvo 250 D with a 623C Waratah head
Runs great, good condition, ready to work.
Selling due to lack of steady work for the machine.
14,500 hours
$114,900 obo
-
42
I have a case 850b for rent. Daily and weekly rental available.
-
43
TNT Attachments
TNT Attachments
780-591-5199
Excavator Attachments
Top quality Design Strength & Performance
We build
Excavator =
Wrist/tilt buckets
Chuck blades
Cleanup and digging buckets
Skeleton buckets
Frost buckets
V buckets
Brush rakes
Root rakes
Scoop rakes
Trenching spoons
Ripper shanks
Stump rippers
Fence rollers
Gravel spoons
Bolt on top mounts
Blank ears / lugging
Matt grapples
Auger hangers
Pallet forks
Excavator to skidsteer adaptors
And much much more
Skidsteer =
Snow pushers
Snow Buckets
Tooth & smooth buckets
Mat grapple
Adapter plates
Fence rollers
Gravel spoons
And much morePlease feel free to message for pricing and availability on any attachments you need. Looking to purchase more than one? Let us know we do package deal pricing!
Warranty on all new attachments
We ship Canada wide
Tags:
Wrist bucket tilt bucket ripper shank digging bucket clean up bucket brush rake root rake Chuck blade pallet forks mini excavator caterpillar John Deere case komatsu hitachi yanmar sany bobcat
-
44
2004 Kenworth T300 Effer Mounted Crane Truck
WE SHIP DIRECT TO YOU, USA and Worldwide!! Financing Available
• Stock Number: 7929 AS
• Location: Central Alberta
• 267,485 Miles
• 9501 hrs
• Engine: Caterpillar C7 Acert 7.2 L
• 300 hp
• Effer 155 Crane
• GVWR: 14,969 Kg (33,001 lbs)
• GAWR front: 5,443 Kg (12,000 lbs)
• GAWR rear: 9,525Kg ( 21,000 lbs)
• Front tires: 11R22.5
• Rear tires: 11R22.5
Previously registered in the US.
• Contact us today if you need more information. • JPH Equipment • Buying Made Simple • We Ship Worldwide •
We do not guarantee that these specifications are error-free or fully complete. The above specifications details are provided as a reference only and should be confirmed prior to purchase.
-
45
Cat 518 line skidder for parts or fix up. Was running 2 years ago , won’t start.
-
46
16' tri-axel Brandt Dump Trailer. Premium quality trailer with combo ramps/doors for easy equipment loading/unloading. 22000GVWR. Excellent condition trailer with very low usage. CVI is current. Call/text 778-349-3650. Price is plus GST.