Cars & vehicles, Heavy equipment with in Canada, Saskatchewan.
-
1
20' CASE DOT DISC
Completely re-built, new discs, new bearings and housings, new tires. Over $10k in quality parts on this disc.
22" Brand New Blades (front & back), Never been used; 6mm heavy Boron Discs
9" spacing
hitch leveling
Has all scraper bladesDecided to sell, bought a high speed disc.
Field ready, great tool for leveling ruts or sloughs
$20,000 obo
-
2
2018 Claas 670, fully loaded, eg. autolube, cameras, auto pilot, auto contour, etc, etc.working hours 804 thresher hours520 phone or text 306 921 8776
-
3
Well maintained combine, Have owned since 2014.
Has sunny brook cylinder, and concaves
Harvest sieves and feeder chain both in perfect condition.
Has new 30.5 32 front drive tires and the rear tires are in good condition.
Has big top hopper, and the large engine. does not use any oil.
Fuel, Eng, Hyd filters all changed
Great straw machine, Ran with a 9760 and kept right with it in most crops. Has a 914 pickup header
Please call or text 1-306-864-7five five five
Asking $35,000
Has 6149 Eng Hrs
Around 4200 threshing hrs
-
4
Looking for a used auger mover. Complete unit preferred. 1 306 468 7882
-
5
Looking for a holset turbo assembly # 3522777 or 3522778 or 3802289 or 919113 or 3919115 or 3919117 or 3919121 it's a non waste gated , h1c
-
6
Rubber conditioning rolls, 16 foot, 1000 pto
Engine: 0
-
7
Net & twine wrap, wide pickup, laced belts, 540 pto
Engine: 0
-
8
For Sale: 1993 Aluminum Lode King Super B grain trailers. Spring ride,24.5 tires, tarps are good shape.
Asking $12000.00 For more info call or text Rick @ 306-238-7910
-
9
Hydrostatic transmission, comes with 60\" belly mount mower, front end loader with bucket & snow push, tire chains. Unit has balance of 6 year/1500 hours Powertrain Warranty and 5 year/3000 hour Emissions Warranty.
Engine: 0
-
10
Twine Wrap only, standard pickup, 1000 PTO, laced belts
Engine: 0
-
11
High dump picker
Engine: 0
-
12
8 bottom Munro plow in excellent condition. Shears are good. Call 306-304-0210 or 306-236-6479 -- $8500 obo
Reduced to $7000
-
13
Twine only, 2.07M Wide pickup, hydraulic pickup lift, 4 bar pickup, 1000 rpm, laced belts
Engine: 0
-
14
2 wheel drive, 130 PTO hp, 18 speed powershift transmission, 3 remotes, 1000 & 540 pto, Duals, Ezee-on loader with bucket & grapple, bale fork.
Engine: 0
-
15
7 ft three point hitch
hydraulic turn chute
540 pto drive
asking 2000
call or text colin@
1 306 268 7994
-
16
Wanted a 25’ or 30’ honey bee swather header. Must be double knife drive.
-
17
Parting out case ih 80/82/88 series combines. Got hundreds of parts from rotors, chains, cab parts, augers, electrical, glass, pulleys, gears, final drives, hydros, shafts, pumps, transmissions, motors, and lots more. Also have a 1015 pickup header parting out and an old 30ft flex header table auger that drives off of right side. Guaranteed cheaper that combine world. Also looking to buy more to part out.
Message, text, or phone me for what u are looking for. I will get back to u. 639 208 7007
-
18
4500 bushel Behlen grain bin sitting on concrete. This bin is like the new style Behlen and a cone can be added on to plus two more tiers to make it 7000 bushels. I have priced it out with a new cone, new door panel, two new tiers and replace the wall ladder price would be $20,000. Please feel free to contact or ask for more pictures. Can contact at 306 561 7288.
-
19
Currently in for green light inspection. Outback ready 16 ‘ rake up pick up. 3000sep hr 4000 E hr $39000 with green light. Negotiations if you come sooner . A good time to check this well maintained shedded machine out . Bill Bueckert 306-759-7711
-
20
1993 T800 Tandem,3406 Cat,13 speed,new tires,new safety,very nice condition, $38,500 ,Trades welcome,306-631-9127
-
21
2013 Manac Step Deck 53'
Aluminum steel comboFor more information please contact Gerry @ 306-630-3158
-
22
Parting out these two tractors. They both run. Both in mechanically good condition.call 306-861-6824
-
23
Looking For A Trimble Feild IQ Sectional control Switchbox.
-
24
Leon loader came off 1270 case
Loader is off tractor now and is in working condition
$800 OBO call or text 306-891-5366
-
25
Pillar laser drill for sale. New discs bearings and hubs last year. Seeds about 3000-3500 acres per year. Bought new. Lots of updates done. Intelligent ag blockage. Alpine kit. In excellent shape.
2012 John Deere 430 bu cart also available if interested
Located at pambrun, sk
-
26
roll tarp to fit grain box 14'6"x7'6" with all hardware. in vg condition.
asking $900.00
3066287779
-
27
Bramco Standard Arm Bed AR Series Bale Bed
Standard Model Includes:
- 2 Toolboxes
- Wiring Harness
- LED Lighting
- Pump/Cylinders
- Recessed Gooseneck Ball (30,000 lb. Capacity)
- Receiver Hitch and Cab Protector
Hydraulics Include:
- The Bramco Hay Hauling Arm Mechanism
- High Pressure Two-Wire Hydraulic Hoses
- Steel Fittings
- 1/0 Battery Cable with Ground Cable
- 200 Amp in line Fuse
- (2) 3” x 20” and (2) 2 ½” x 6” Cylinders
- Hydraulic Pump with Handheld Controls in CabOPTIONS (Not Included In The Pricing)
- Add 2 Toolboxes at Rear ($1344.00 Option)
- Work Light ($301.00 Option)
- Add Extra battery (Kit) ($364.00 Option)
- Bale Spike Kit ($728.00 Option)
- 7-Way Trailer Plug ($115.50 Option)
- Cordless Remote ($1190.00 Option)
- Hydraulic Couplers ($434.00 Option)PRICES
Single Wheel/ Short Bed
Price Including Shipping and Installation: $16,541.50 + GSTSingle Wheel/Long Bed
Price Including Shipping and Installation: $16,845.25 + GSTSingle Wheel/Cab and Delete Bed
Price Including Shipping and Installation: $17,149.00 + GSTDual Wheel/Bed Delete:
Price Including Shipping and Installation: $17,452.75 + GSTDual Wheel/Cab and Chassis 60” Cab to Axle
Price Including Shipping and Installation: $17,756.50 + GSTDual Wheel/ Cab and Chassis 84” Cab to Axle
Price Including Shipping and Installation: $18,242.50 + GSTLOCATED: Lacombe, AB
INSTALLED AT LACOMBE, ABFinancing Available OAC!
Please reply to this ad for more information!
-
28
4-cyl gas
2wd live 540 pto 12v
New tires-battery-gauges-plugs-paint-oil
Runs/drives excellent
$7800 obo
-
29
Powershift
Pto
3400hrs
Outback guidance
850 duals
Weight kit
-
30
Chisholm Trail BALE BED and DUMP BED ALL IN ONE $19,769
There is no other unit on the market like it!
Authorized Distributor for C5 Manufacturing.
The Ultimate Bale Bed – A Bale Bed and Dump Bed ALL IN ONE!
The Chisholm Trail Bale Bed is a specialty after-market steel bed manufactured to fit pickup trucks, aiding farmers and ranchers in the feeding process of livestock and the transport of large rounds of hay. The same hydraulic components operate both the arm function and the unique dump bed function, adding considerably to the versatility of the unit.
The Chisholm Trail Bale Bed is considered by many to be the ultimate bale bed because of its feature-rich design, ruggedly built components, ease of operation and competitive pricing.STANDARD FEATURES:
Unique Dump
The Chisholm Trail Bale Bed’s unique dump feature expands your capabilities to handle hay and dump materials from the comfort of your cab. There is no other unit on the market like it. Arm lift capacity is 2,850 pounds and bed dump capacity is 6,000 pounds.Independent Arm Action
The Chisholm Trail Bale Bed uses two squeeze cylinders rather than a phasing cylinder for better squeeze and maneuverability. You can move the arms separately or in tandem for easier bale retrieval when stacked end-to-end. This also helps loading into a ring feeder, even if you do not have a straight shot. Lift any size or shape effortlessly— round, square, wide or narrow. You can haul up to four 4’ rounds side-by-side with a dual wheel pickup. You can also squeeze a large 4’ by 8’ square bale end-to-end or from the side. The arm range on dual wheel trucks of 3’6″ to 9’6″ enables you to grab small or misshapen items as well.Free-Float Arm System
The free-float arm system allows you to unroll hay while maintaining full contact with the ground over rough terrain. This function helps to prevent skips and thick blankets of hay, allowing even distribution of feed and reducing waste.Locking Valve System
Our unique locking valve stops arms from creeping out when carrying hay bales. Additionally, unlike other units on the market, our design significantly limits truck frame stress.No-Need-to-Jack Trailers
The Chisholm Trail Bale Bed makes work easier and quicker in so many ways, especially hooking up your gooseneck trailer. Just raise the bed until the jack stand is off the ground, store the jack, lower the bed, and off you go. No more cranking!Additional Features
• Electric-over-hydraulic heavy duty 4 gpm power unit
• LED work lights that work on a switch in the cab
• Tethered hand control
• Additional set of stop/turn lights in the headache rack
• Heavy duty 2 x 4 x 3/16″ rounded bent tube headache rack with louvers for stylish good looks and the ultimate in safety
• 2-5/16″, 30,000 pound rated hitch ball with 1″ rise, recessed in the bed with door closure
• H-frame stabilizer system
• 1/8” Tread plate floor with component access doors – no door hinges! Access door for all working components under the bed including fluid fill door.
• Mud flaps
• LED running lights throughout the bed and a pair of resistors to accommodate the low voltage lights (no flashing of lights due to computer error)
• Four 3 x 20 lift cylinders
• Two 2 x 6 squeeze cylinders
• 350 Amp fuse and fuse block system
• Grab handles on each side of the headache rack
• D-ring tie down rings on each side of the bed
• Two-part urethane paint for more durability and shineSAFETY FEATURES
• Easy access to mechanical parts through large access doors
• Safety stand 2’ x 1- ½ x 1- ½ x 11 gauge steel
• Highly visible warning and caution decals
• 350 Amp fuse and block attached to truck frame
• Heavy duty bent tube headache rack
• Heavy duty 2 5/16th 30,0000 pound rated hitch ball 1″ rise
• 23’ Tethered hand held control pendant
• Ruggedly built all steel construction
• Grab handles on either side of the headache rack
• D-ring tie downsSIZES
The Chisholm Trail Bale Bed is available in six different sizes:SINGLE REAR WHEEL TRUCKS PRICING $$$
37N Bale Bed With Dump - $19,769 + GST Including Installation
7’ wide x 7’4” long
The 37N bed fits single wheel trucks with a very short bed. It has a 37.5” cab to axle measurement.42N Bale Bed With Dump - $19,769 + GST Including Installation
7′ wide x 7’8″ long
The 42N bed fits single wheel trucks with a short six-foot bed. It has a 42″ cab to axle measurement.56N Bale Bed With Dump - $19,910.75 + GST Including Installation
7′ wide x 8’10” long
The 56N bed fits single wheel trucks with a standard eight-foot bed. It has a 56″ cab to axle measurement.60N Bale Bed With Dump - $20,045.75 + GST Including Installation
7′ wide x 9’10” long
The 60N bed fits a true cab and chassis ton truck with single wheels and a 60″ cab to axle measurement.DUAL REAR WHEEL TRUCKS PRICING $$$
37w Bale Bed With Dump - $19,910.75 + GST Including Installation
8’ wide x 7’4” long
The 37w bed fits dual wheel trucks with a very short bed. It has a 37.5” cab to axle measurement.42w Bale Bed With Dump - $19,910.75 + GST Including Installation
8′ wide x 7’8″ long
The 42W bed fits dual wheel trucks with a short six-foot bed. It has a 42″ cab to axle measurement.56W Bale Bed With Dump - $20,010.75 + GST Including Installation
8′ wide x 8’10” long
The 56W bed fits a dually bed truck. It has dual wheels and a 56″ cab to axle measurement. This is often called a bed delete truck. It has a bent (dog leg) frame as opposed to a straight cab and chassis frame.60W Bale Bed With Dump - $20,495 + GST Including Installation
7’8″ wide x 9’10” long
The 60W bed fits a true cab and chassis ton truck with dual wheels and it has a 60″ cab to axle measurement. This truck comes from the factory without a bed. It has a straight frame.84W Bale Bed With Dump - $21,450 + GST Including Installation
8′ wide x 11’10” long
The 84W bed fits dual wheel trucks with 84″ cab to axle measurement.OPTIONAL FEATURES AND ACCESSORIES
• Removable side boards
• Spinners for unrolling hay
• Under body tool boxes
• PTO provisional power unit
• Engine driven power unitWARRANTY
C5 Manufacturing has an excellent reputation for quality and workmanship. If you feel a component has not lasted to your expectation, please contact us. These concerns will be handled on a case-by-case basis.
C5 Manufacturing warrants, to the original purchaser, products manufactured by C5 Manufacturing to be free of defects in material and craftsmanship for a period of two years from the date of purchase. There will be NO warranty if the bed is installed by an unauthorized dealer.
Optional items have specific warranties:
• Motor and pump are warranted for a period of one year
• Spinners and headache rack work lights are warranted for 60 days
• The Dew Eze and CW Mills’s pumps are warranted for 120 days
C5 Manufacturing also warrants the purchased parts to be free from defects for the period as set by the parts said manufacturer. If any part, as determined by C5 Manufacturing, is found to be defective, the labor and the part to be replaced or repaired will be borne by C5 Manufacturing.
All shipping and handling are the consumer’s responsibility. For replacement parts, please contact your dealer or the C5 Manufacturing plant in Kingman, Kansas. Warranty for replacement or repair shall not extend the original warranty period. C5 Manufacturing does not warrant against normal wear or damages caused by abuse, negligence, poor maintenance or operation beyond the rated capacities. The warranty card must be completed and returned to C5 Manufacturing within 30 days of purchase.LOCATED: Red Deer, AB
INSTALLED AT LACOMBE, ABFINANCING AVAILABLE OAC!
Please reply to this ad for more information.
-
31
Custom hauling. Bales, equipment, general freight, whatever will fit on my trailer. 2017 f350 dually with 35’ triple 8000lbs axles trailer. 12k winch for loading trailer. Also able to haul your trailer with my truck. I have gooseneck, fifth wheel and bumper hitches on it truck. $125000 cargo insurance with 2 million liability. Located in swift current. Call or text Jarrod at 306-774-4410 for pricing.
-
32
Two Straight Cut Headers For Sale
1) Macdon 960 36 foot draper Header - $4000. Works well, used this harvest, canvases replaced this year, most of the knives as well.2) New Holland 971 25 foot Header - $2000 Also in good working condition, needs a few new teeth on the reel. Not used this harvest, but was last year.
Crary Cyclone Chaff Spreader, with mounting brackets. - $500
Please call Roy Knelsen for more information - 306-741-3376 or 306-773-9160.
-
33
For sale 2013 329 John Deere track skidsteer. Low hrs ( 2671.4)well maintained new tracks in 2018 one owner bought new high flow. Bucket attachment comes with. Asking 42,000 OBO
Serious inquiries call Sheldon (306)460-9191.
-
34
Have a few Mack Trucks with Mckee/firewing ag solution fully hydraulic manure spreaders. Years range from 1998 to 2014. All trucks in good shape safetied every year. They do have current safeties on them but do run out through out January to march. For more info please call 306 741 7496. Serious inquiries only no messaging please call
-
35
6 Bridgestone 799 virgin rubber 30-40 % left good trailer or farm truck tires 90 a tire or buy them all for 500
-
36
2030 engine hours, 1494 separator hours, includes auto steer, 615P belt pickup, 500 hours on new grain elevator and return elevator. Green Light records available for last 3 years.
-
37
Heavy duty skidder or forwarder tire chains. Currently on 23.1-34 but will likely fit 28L-26 as well. These show very little signs of wear. asking $1500 willing to ship them. Call or text 306-276-34OO
-
38
- Good yield potential
- Good bushel weight
- Low % of thins
- Great stand ability
- Early maturing
- Strong resistance to crown rust
Call for pricing!
Blair 1-306-862-7401
Mark 1-306-873-7373
Nicole 1-306-812-7209
-
39
New Clutch and Pressure Plate for Cockshut 40 tractor
Would fit Cockshut 50 too.
-
40
5 in one cleaner we have lots of screens for it $10,000 phone 306-768-7125
-
41
2020 Unverferth 2020
2,000+ bushel capacity, 24” pivoting vertical auger, 20” horizontal auger, 2 minute unload time, 2-way directional downspout, roll tarp, 5 point Digi-Star 520 scale package (with axle & hitch load cells), 1050/50R32 tires, 1,000 RPM PTO drive (1 ¾” – 20 spline) with cut-out clutch, hydraulic jack, requires 4 hydraulic remotes, green in colour & more!
Requires a 400+ HP Tractor
A red unit is also available.
$175,900
Finance & Lease options are available OAC!
PLEASE NOTE - As our Financing Partners may change their interest rates from time to time, please be aware that advertised Finance and Lease Payments may change at any time without notice. We reserve the right to refuse a sale due to typo or misprint, or at our discretion.
This unit is at our Regina location.
For more information please call our sales department @ 306-781-2828.
KIT REF ID: 23167357
-
42
2002 Flexicoil 40’ 5000 with 2340 cart.
Steel packers
1” Dutch openers
New manifolds and hoses
Packers recapped
Variable rate control
New wiring, $2000 bill this spring
Semi hopper
Single shoot
$20,000 obo
Call or text Morgan @ 1-306-852-8145
-
43
Looking for outside Deere Rear Wheel Weights. Need the 2- 165lb starter weights and then 2 or 4 of the 450lbs. To fit an 8100 but 7000-8000-9000 series and 4555 and similar series tractors are the same
-
44
2014 Wilson Tridem Grain Trailer, 3 Hopper, Mint Condition, Located in Tisdale. Contact Seller (403) 651-9877
-
45
Coil packers with harrows: 3-4’ $80 each 2-5’ $100 each & 3 heavier 5’ $150
LOCATED AT CONSUL, SK
My phone number is 306-299-4815.
-
46
2006 mt865 cat challenger tractor 9000 hours.
Engine rebuilt at 5500 hours
Transmission rebuilt at 6500 hours
Both done at Kramer
No pto
Tracks in good shape
Degelman 7900 blade 18 ft like new
85000 obo for tractor
25000 obo for blade
100000 for both together
-
47
800 Duals
5 SCV’s
No PTO
2060 hrs
GPS
Great Condition
$339,000 OBO
All reasonable offers considered, no trades
Call Will @ 3062816827
-
48
Buying unwanted broken or scrap vehicles, also batteries radiators old tractors or transport trailers
-
49
Flotation tires, net wrap, mega wide plus pickup. $23,000 OBO
-
50
Looking for a joystick set up for a John Deere 4440/158 loader. Would need to be a 3 function.