Cars & vehicles with in Canada, Saskatchewan.
-
1
For Sale vintage 1950s Chevrolet chevy steering wheel horn centre button as pictured. $40 plus shipping or free local area delivery. Located in Kinistino
-
2
FOR SALE - FLOOR GUARD GARAGE MAT
7 feet 6 inches X 18 feet 6 inches. BRAND NEW
BOX HAS NEVER BEEN OPENED
FOR CAR, VAN OR SUV
WILLING TO SELL FOR $180.00
-
3
Selling a 4.2 L six cylinder Jeep engine, was running and driving in a 1981 cj7 jeep but pulled it out a put in a amc V8 instead. Complete carb to oil pan, $550.00
-
4
Straw from 2021
Approx 40 bales
For further information
Call or text 3069419579
-
5
Selling the differentials and springs from this frame for $1,250.00 each, 5.38 gear ratio, in very good shape. Might sell whole frame with differentials and springs for $4,000.00 frame is straight and has no rust holes. Comes with steering box & linkages. More pictures coming when I can find them.
-
6
Selling a M38A1, parts Jeep, we have the differentials, springs, good frame (no rust), body tub, complete dash with gauges, Fiberglass hood, grill, frame has gun mount still. Had a 289 from a 65 mustang in it and I still have that engine, was rebuilt 20 years ago but still runs (in another Jeep but would sell it for another $1,500.00, complete carb to starter, has header’s.
Might have other parts but will have to look. $1,800.00 + $1,500.00 for the ford engine
-
7
These seats are from a 73-87 blazer. Clothe and foam in very good condition. rear seat $200.00, Center console $175.00. Rear seat comes with the mounting brackets. Front seats sold
-
8
Selling three Center consoles, factory OEM $225.00 each
-
9
1998 18ft sled or quad trailer
6’5 wide
-
10
Selling several amc Jeep engines, transmissions, t cases, factory 4 barrel intake, make a reasonable offer, no low ball offers accepted
-
11
New- top end, plugs, water pump, oil tank, snow flap, sliders, newer carbides. Good 1.75" track. MBRP Can. New spare belt. 3880 miles. $7500. text 3062408972
Sold as is.
-
12
2003 Artic Cat F7 bought last season no issues ready to ride fast machine starts good every time it has hand/thumb warmers 5000Mi for more info leave a message at 306 304 7432
-
13
It runs beautifully and has had regular servicing. Need room in the garage. 5349 km
Cash or trade. Show me what you got for a trade
-
14
Ready to ride for the season. Reverse. Heated hand & thumb. Electric start. New battery, sliders, skegs. Starts and runs good. 4040km. $6000.00. Located in Green Lake, SK. Call Bryan @ 306-832-2070
-
15
500 fan cooled yamaha engine. Heated thumb and hand warmers. Hook up for heated visors. Comfortable two up seat with no rips. Electric start. Newer battery that was stored inside and charged over summer. I've owned it for 7 years and stored it inside except for last 3 summers were under the deck. I've changed out a few things that needed changing to keep it running nicely. It's not mint but it's dependable and perfect for getting around quickly. Reverse works A couple minor defects like the oil light and speedo that I haven't tended to because they aren't critical to an enjoyable day on the snow.
-
16
This quad is a beast. 2019 1000 XMR. Yoshi exhaust and snorkel extension. 5020 km but will go up as still riding. Fluids changed and belt upgraded to maverick within last 100 km. 2 up seat and box do not go with quad but could possibly be negotiated. $13950 obo.
-
17
Sled runs great. Always warmed up before being used. Stored indoors. Has MBRP exhaust, frog skin covers on vents, and I have a tunnel bag for it. 2223kms.
Asking $6500.00/ obo
-
18
5 Foot Polaris blade for a 400 orv 500 Polaris Sportsman Quad. comes with the mounting bracket for a Polaris sportsman 500 it was on my 2007 Sportsman 500 2 up it will fit a Sportsman 400 or 500 Quad. This blade pivots from the front mounting plate so there is no under belly aframe to hang up when pushing snow. The blade works very well For leveling dirt or plowing Snow, Asking $595.00 .00 or best offer
Phone 306-240-7285
-
19
Can am outlander 800
Runs and drives good, has a fmf exhaust new key, new battery, ss rims, 29.5 outlaws, rad relocate, snorkelled, new belt, needs a seat recover, 5949 km. Reason for selling is im looking to get back into dirtbikes. $5200 obo.
-
20
2012 MXR 800 and a 2012 Renegade X 800 available as a pair for $20,000 or individually for $11,000 each. No trades. Call Mark @ 306-304-7705 with inquiries.
-
21
I have 2 2018 txt lithium golf carts fully refurbished with new paint ...lights...windshields...mirrors tires and wheels. First one is 7500...Lifted with undergrowth lights 8500...OBO.....CALL Ted at 306 537 3915 for more info...delivery available
-
22
Electric scooter in great working condition. 2 new batteries.
Call 306 728 8077 for more information or to come see. Offers considered.
-
23
MONDIAL GP-10 Car Lift They are in stock and we ship Canada wide, 1-800-361-4095 Grand Prix Import has been selling Quality Automotive Equipment since 1977 in the Canadian market .GP-10 is one of the most affordable floor plate car lifts built with quality materials and good workmanship. The lift has a strong double "S" column design to support 10000 Lbs capacity. Its an asymmetric lift with a Double cylinder, Steel pulleys and equalizing cable system. motor / pump 3 hp - 220 volts.
Combo (Symmetrical and Asymmetrical) Arm Assembly
Straight Front/Rear 3 Stage reach from 22 7/8" to 42 5/8"
Straight Rear 2 Stage reach from 33 5/8" to 52 7/8"
Screw-in pads 4 pieces included
Truck adapters 4 pieces included
Double point safety lock release
Automatic arm lock restraints
Relief valve built in power pump to prevent overloading
Door guards protection rubber
Up-limit switch to protect cylinders working stroke used in safe length scope
Heavy duty 3/8" diameter cable and 5" pulley that reduce high stress on synchronization process and increase cable life
Ultra high molecular self lubricating nylon slider that ensures carriage smooth moving up and down
Lifting operation by pressing "UP" button on motor
Manual lowering operation by pressing lever
Relief valve built in power pump to prevent overloading
Overall Height: 143 3/16"
Overall Width: 134 5/16"
Maximum Lift height with Truck Adapters: 81"
Maximum Lift height without Truck Adapters: 75"
Minimum Height of Arm Top: 4"
Carriage to Carriage Width (Drive through clearance): 100"
Column to Column Width: 109"
Column Cross Section: 11"L x 7"W
Driving Mode: Dual hydraulic cylinders, chain drive
Motor: 220V Single Phase 3HP 10A (recommend a 30A breaker)
Hydraulic Oil: 3-5 gallons AW32/AW46
Lifting Capacity: 10,000 LB
Time to full rise: 50 sec
Concrete Requirement: 5" thick at 3500 psi reinforced with fiberglass or steel (
Anchor bolts/mounting hardware included
Tool trays and toe guards included- Warranty is 1 year on parts and 5 years on the structure.
-Transport service and delivery available across Canada
See my other ads !!!!!!1 year warranty on parts and 5 years on structure.
For more information contact us Tel:1-800-361-4095
Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
24
6 foot truck box topper. It was originally off a GMC Sonoma but took it off. It is in good shape. The only con to it is the clear coat finish is starting to peel. It is 4 foot wide by 6 foot long. Selling for $150 obo. Don't be shy to shoot me offers either.
-
25
Warning light. New in box.
-
26
Bought for my Ford Edge Sport then didn't need. The return window
closed and they wouldn't accept my return.
Brand New...2 boxes
Asking $75 for both.
Pick up in Balcarres or will meet in Fort
Quappelle...will arrange to meet in Regina certain days
-
27
Brand new. See pictures for specs. These are 3 phase, 15 HP. They have the trash/agitator on them so they will handle some solids. Located at Kelliher
-
28
Truck topper 8 feet , good shape call only
-
29
Sioux valve grinding machines . Complete with seat stones and arbours. $1500.00 obo each
-
30
4x8 Steel Utility Wagon
Weight Capacity is approx. 2200lb with Wagon
Treated Plywood on deckGreat in-behind Quads, Side by Sides or Garden Tractors
Price - $1,000.00 (with plywood decking) one left
Price - $900.00 (without plywood decking) one leftCall - 306-536-5742
-
31
Skidsteer Rotary Tiller
Prepare your seedbed or garden for planting using the MK Martin Rotary Tiller. With standard features such as adjustable skidshoes, floating deflector, replaceable tines, and an oil bath drive chain this tiller easily loosens soil for a variety of applications.
For optimal performance, the tines are configured in a spiral pattern. This provided better overall processing of the soil while increasing overall efficiency of the tiller.
Powered By TurnkeyWebSolutions.com
Engine: 0
-
32
- Extra heavy duty 15 foot, rotary cutter with 240 horsepower Bondioli gearboxes with oil level sight glass and 1-3 4 input shafts and 3 (75mm) output shaft, Extra heavy duty 275hp divider box
- Extra heavy duty Bondioli Cat 6 (G8) cutter deck drive lines
- High-torque, self adjusting wing slip clutches ensure better performance in rough cutting
- All grease points on the main mower body have been eliminated, spring steel greaseable bushings are used only in the walking axles. All other major pivot points are now use maintenance free, fibre wound bushings with 1 1 4 diameter pins for strength.
- Single domed, sweep clean deck design eliminates excess weight over competitive double-deck designs, eliminates build up of debris and prevents rusting on top side of deck
- Walking or through axles are now available on both centre section and wings
- Increased ground clearance and a cutting chamber depth of 15 3 8 (2 greater than the Series 4) and an increased blade tip speed, result in an unsurpassed material flow with improved cutting speed
- Extra large 10.5 X 27 skid steer tires, 29 foam or air filled aircraft tires or 26 laminated tires, allow for greater transport height along with improved performance in wet conditions
- The XH-1500 Series 5 incorporates a floating hitch through the use of tension links. These links are connected from the hitch to the rear beam and are allowed to free float in one direction. This system allows the front of the cutter to easily pass over obstacles without causing damages to the tension links or putting unnecessary stress on the deck.
- The hitch is also equipped with a bolt in, replaceable 2 1 4 swivel which allows for maximum ground contouring without putting unnecessary twisting on the tractor draw bar.
- Hitch options include Schultes Precision Hitch, a standard clevis and our new Pro Level Hitch
- Centre suspension reduces stress on tractor draw bar
- 3 8 thick formed deck protection rings prevent blade to deck contact
- Double safety chains with individually replaceable links are standard equipment
- New adjustable and replaceable side skirt with skid shoes that are cast and cupped to reduce scrubbing on tight turns.
- Optional gauge wheel kit can be mounted on the left or right wing to aid in clearing road approaches during ditch mowing
- New wing lift tower, along with rugged hinge line allow for easier operation increased strength. The double acting independent wing lift cylinder was designed to put less stress on wings and hinges
- Phased hydraulic cylinders are standard to provide level lifting across the width of the cutter. Centre and wing sections all raise and lower together. Cutting height is controlled by the centre depth stop for one touch levelling.
Powered By TurnkeyWebSolutions.com
Engine: 0
-
33
KR Series PTO Generators
Our newest addition to our line of PTO generators, the KR series generators are designed to fit tractors from 45 to 97 horsepower and support power requirements from 30 kilowatts to 65 kilowatts. The KR models generator assembly is made in Canada and the main components are made in Europe. When the unexpected happens, you can rely on the trusted combination of your tractor and your KR generator to get you back up and running. With one less engine to maintain, a PTO generator is an effective, reliable backup power source for your smaller appliances and large equipment motors on your farm. The KR series is a 4-pole copper winding generator that features a brushless design for less maintenance, automatic voltage regulation and DisplayMaster1, Baumalights own at a glance performance monitor.
Powered By TurnkeyWebSolutions.com
Engine: 0
-
34
Front wheel assist, 130 engine hp, 105 pto hp, 16 x 8 with power shuttle transmission, 18.4R38 rear tires, 380 85r30 front tires, 4 mechanical remotes, 3 point hitch, rear wheel weights, New Holland 845TL NSL loader, 102 bucket, quick connects at bucket, Low maintenance upgrade has been installed.
Powered By TurnkeyWebSolutions.com
Engine: 0
-
35
13 Foot cut, flail condiioner
Powered By TurnkeyWebSolutions.com
Engine: 0
-
36
Land Leveler
These rugged scrapers come in a range of sizes from 8 to 12 feet to fit your needs and your equipment. Standard on all models is our 1 2 inch thick reversible hardened cutting edge, ready to smooth out the bumps and fill in the hollows. Cutting depth is controlled by a 3x8 hydraulic cylinder so you can decide how much of a bite to take and adjust on the go. All models are well suited for feedlot and soil reclamation or swale cutting.
Powered By TurnkeyWebSolutions.com
Engine: 0
-
37
Net Twine, Standard pickup, 1000 pto, MRT laced belts, hydraulic pickup lift, 6 bar pickup. 16, 341 Bales
Powered By TurnkeyWebSolutions.com
Engine: 0
-
38
Pulsar UTV Mower
Tame your property using the MK Martin UTV mower. This rough cutting mower is built for creating and maintaining trails, managing your open fields, and for improving wildlife habitats before plowing and reseeding keeping harmful chemicals out of the soil.
The UTV mower is self powered with a 19 HP Briggs Stratton engine and a 12V battery, giving you the power you need to run without needing a PTO or hydraulic hookup.
The mower is equipped with two 3-blade rotors, cutting through tall grass and weeds without a problem. Flat free tires help maintain consistent travel height and prevent downtime from blowouts when working in rough areas.
The tongue can be set in 3 different positions allowing you to tow the mower either directly behind your UTV, or offset to the left or the right, giving you more control in difficult to reach areas.
Powered By TurnkeyWebSolutions.com
Engine: 0
-
39
The new generation of TL Series inline bale wrappers from Tube-Line are built to provide producers and custom operators with high efficiency and proven reliability. To ensure that everyone can reap the benefits of the high moisture hay, Tube-Line BaleWrappers are available in multiple configurations to suit your needs and your budget. Features
Pre-Tensioners To create the 55% (approx.) stretch of the plastic, the pre-tensioners are knurled which allows them to grip and pull the plastic between the rollers activating the bonding agent in the film.
Film Snap - Patent Pending Standard on all inline Balewrapper models, Tubelines Film Snap easily cuts wrap with a single action. Press and hold the Film Snap plunger located beside the operators panel until both the tensioners pass, triggering the cutting action. The Film Snap bar snaps into action safely cutting the wrap without stopping the cycle.
3 Year Warranty Inline wrappers carry a 3 Year Limited Warranty. For more information please contact Tubeline Manufacturing.
ECV Exclusive Features- Soft Start
- Bale Counter (Lifetime)
- Bale Counter (Resettable)
- Bale Presets
- Large Easy to Read Display
- Remote Engine Start
- Self-Diagnostics
- Single Joystick Control to drive steer Other Standard Features
Main Control Panel Wired for Field Installed Options
Safety Shut Off Switch on Guards
Safety Shut Off Switch on Panel
Retractable Tongue
Folding Tongue
Electric Start 13HP Honda Gas Engine (18 Amp Charging System)
Low Oil Alert on Engine
Spark Arrestor on Engine
Hydraulic Manifold
Hydraulic Steering
Temperature Gauge on Hydraulic Tank
25L 6.6 USG Fuel Tank with Fuel Pump
Limit Switches
Adjustable Stroke Length on Charge Table
Electric over Hydraulic Controls
Fully Automatic Cycling
Automatically Idles Down When Cycle Completed
Drive Wheel
34 Pre-Tensioner Carriers
Lock Pin (Hoop)
Roller Wheels
Push Ram
Push Ram Cylinders
Cross Tube Unloading (to push off last bale) Patented
King Pins with Tapered Bearings
Road Lights
3-Year Warranty
Guide Rollers on Discharge Ramp
Quick Start Hydraulic Cam Axle
Specifications Specifications TL50 LSV TL50 ECV Overall Length 18 18 Width 9 9 Height 9 9 Weight 6,300 lbs. 6,300 lbs. Power 13 HP Honda 13 HP Honda Electric Start Standard Standard Alternator 18 Amp. 18 Amp. Hydraulics Self-contained Self-contained Controls Electric over Hydraulic Electric over Hydraulic Tires (2) 11L x 15 8 Ply (2) 27 x 10.5 Traction (2) 11L x 15 8 Ply (2) 27 x 10.5 Traction Quick Start Leveling Quick Deck Adjust Quick Deck Adjust Brakes (Compactor) Deck Tight Pack Deck Tight Pack Steering Electric over Hydraulic Electric over Hydraulic Emergency Stop E Stop Button E Stop Button Hydraulic Tail Gate N A - Fixed N A - Fixed Transport Lights Standard Standard Bale Round Up to 6 Up to 6 Square (Single) NA NA Film Stretcher (2) 30 x 55% (2) 30 x 55% Bale Alignment Adjustable Adjustable Bale Guide Rollers Standard Standard Wrapping Capacity 120 Bales Hr. 120 Bales Hr. Hoop Speed Adj. Flow Control Valve Adj. Flow Control Valve
Powered By TurnkeyWebSolutions.com
Engine: 0
-
40
Cedarapids Commander 544, 12" X 36" Jaw, Twin Rolls, D353 CAT power unit, John Deere powered Generator. Comes with spare belts and automatic welder for the rolls. Buyer responsible for load out and all costs associated. Will consider offers.
-
41
48’ FULL ALUMINUM
TANDEM FLAT BED TRAILER
ALUMINUM DECK
102” WIDE
60” X 24” X 30” FRAME MOUNTED TOOL/STORAGE BOX
20 LEFT SIDE SLIDING RATCHET BLOCKS (NO STRAPS),
LEFT SIDE SUSPENSION DUMP VALVE & GAUGE BOX, LEFT SIDE DUNNAGE RACK, LED LIGHTS.
BRAND NEW TIRES
COMES WITH SAFETY
42,000.00 CAD
-
42
Set of four Bobcat 14-17.5 tires and wheels. Heavy wall bead guard. 14 ply. Very good condition. Average of 15 mm of tread at centre. Compatible with models A220, A300, A770, S740, S750, S770 and new equivalent. Taken off of S770 Bobcat as we went to a different size.
Priced as set of four
-
43
John Deere Pull-Type Combine/Tractor control box.
Best Offer.
Will respond only to txts or calls from 8am to 11pm at
6 three 9 - seven 3 nine - 0 three 3 nine.
-
44
2012 International Durastar 4300
5 Ton
24ft Box
Automatic
Power Liftgate
Hydraulic Brakes
Air Ride
Air Seat
Air
Cruise
12,000 Front
21,000 Rear
New Engine Installed With Only 106,970KM On It Recipes To Prove
Comes With Old Engine For Spare Parts
Good Running Engine And Transmission
Ready To Go
-
45
2013 Volvo VNL 630
550HP D13 Engine
I-Shift Transmission
Deleted DEFFront Axel: 12,500
Rear Axels: 46,000
Ratio 3:58
Wheel Base 214"
Wheels: AluminumTires: 11R22.5
Michelin Steers
New General Drives
Centramatic Wheel BalancersFull Diff Lockers
Full Fenders - Minimizers
Webastos Engine & Cab Heaters
Inverter
Fridge
Frame Mounted Ace Toolbox
Remote Control PTO
New 4" Blackmer PTO Fluid Pump
2 beds in sleeper (top used mainly for storage)
HD Moose Bumper - Magnum (easy open)
Remote Door Locks
All Power Options
Bug Screen & Winter Front
Blind Spot Mirror
New Rad & Alternator in 2016
New Head & Injectors Nov 2016
Amsoil Oil Bypass System (Filtered down to 2 Microns)Serious enquires only
Price dropped from 75,000
-
46
1973 John Deere 1830 Tractor. With factory 145 loader + 2 hydraulic controls.
6500 Hrs, next to new 16.9x30 rear tires.
Shedded, one owner.
$12,500.00
Text or phone: 306-730-7413
-
47
Moving Sale!!!
This tractor is the tractor that we used on our acreage. It is a 24hp diesel engine and comes with cruise, front wheel assist, and the bigger frame. It has 1122 hours on it mostly used for mowing and snowblowing.
We would like to sell this as a package with the loader and the following 3 point attachments.
Tiller
Finish mower
Snowblower
Yard rack
Box blade
We have also ordered a new seat from John Deere and that will be included in the price of the package.
Price is open to reasonable offers.
-
48
Bobcat T590 for sale. Owned since new. Machine has 2650 hours. Kubota engine, roller suspension, keyless start, foot controls, A71 package with cab insulation. Tracks are at 50-60%. Looking for $42,500 plus GST.
-
49
10x50’ Westfield swing auger in good shape. Hasn’t been used in a few years.
-
50
1998 JD 767 air drill with 777 230 bushel tank bourgoult mrb set up for NH3 c/w Dickey John cooler and variable rate monitor,packers recently recapped good condition. Call 306-725-7600