Buy and sell, Business, industrial with in Canada, British Columbia, Skeena.
-
1
1 industrial dehydrator and 2 industrial chicken roaster.
-
2
243 litre total
-
3
Taller unit is 24 feet long, two shorter units are 12 feet long a piece. I have two condensers that I converted to sing phase. My business didn’t pan out, looking to recover some money. My loss your gain! Both were hooked up and working by Webbs Refrigeration in Terrace BC. Open to reasonable offers. You must pick up and haul yourself.
-
4
MODEL 10 TROMMEL (TESTING PLANT)
Capable of up to 10cu yards per hour. Life: Approx. 85 hours.
Includes:
• 2 inch water pump
• Custom 12-foot sluice made by Macon
• All riffles, screens, and matsFor specs, please see visit the manufacturer’s site: https://thegoldmachine.ca/machine-models/model-10/
Asking $24,500. Can deliver to Prince George or Vancouver.
Please contact Mike Neels at 604.798.9491 or by email at mikeneels@yahoo.com
-
5
Flat Plate Brazed Heat Ex-Changers, Échangeurs de chaleur brasés à plaque plate,
Description
FLAT RATE EXPEDITED SHIPPING WITH TRACKING $30 ANYWHERE IN CANADAWe launched our new website so you can order On Line with full SECURED check out, Visa/MasterCard/Paypal/Email Transfer
Nous avons lancé notre nouveau site Web afin que vous puissiez commander en ligne avec un paiement SÉCURISÉ complet, Visa/MasterCard/Paypal/Transfert par e-mail
Nous avons lancé notre nouveau site Web, vous devriez pouvoir commander directement en ligne si nécessaire, ou l'ancienne méthode traditionnelle par téléphone, mais notre français verbal n'est pas si bon sourire
Ok pour écrire des problèmes car nous pouvons traduire et répondre en français.Or call as Needed 705-999-2105
Our web address www heatexchangerscanada .comOu appelez au besoin 705-999-2105
Notre adresse web www heatexchangerscanada .comWe stock and carry many different sizes of liquid to liquid heat exchangers depending on your application. Our heat exchangers are UL verified and have 3/4” to 2” connections. These are commonly used in HVAC, Boiler, industrial, wood boiler and solar thermal applications.
Nous stockons et réalisons de nombreuses tailles différentes d'échangeurs de chaleur liquide à liquide en fonction de votre application. Nos échangeurs de chaleur sont certifiés UL et ont des raccords de 3/4" à 2". Ceux-ci sont couramment utilisés dans les applications CVC, chaudières, industrielles, chaudières à bois et solaires thermiques.¾” Port Connection
B3-14-20 ¾” $180
B3-14-30 ¾” $205
B3-14-50 ¾” $295
1” Port Connection
B3-32-10 1” $230
B3-32-20 1” $330
B3-32-30 1” $395
B3-32-40 1” $445
B3-32-50 1” $5151 ¼” Port Connection
B3-27-60 1 ¼” $505
B3-27-70 1 ¼” $695
B3-27-80 1 ¼” $730
B3-27-90 1 ¼” $770
B3-27-100 1 ¼” $8951 ½” Port Connection
B3-63-50 1 ½” $945
B3-63-60 1 ½” $1,085
B3-63-70 1 ½” $1,2402” Port Connection
B3-95-40 2” $1,170
B3-95-60 2” $1,540How Brazed Heat Exchangers Operate
The flow pattern of the brazed heat exchanger is similar to any other plate heat exchanger. The compressed plate pack creates a continuous series of channels. The plate and porthole arrangements permit the two heat-transfer media to travel in alternate channels in a counter flow manner.
The efficiency of these heat exchangers is high due to the turbulent flow patterns of the fluids through the channels. This allows for a very close temperature approach of 2-3 deg; F resulting in economic heat extraction.Advantages of brazed heat exchangers in hydroponic applications:
•They have a high temperature/pressure rating. All our brazed heat exchangers have a 437deg; F and 435 psig rating.
•Footprint size of the heat exchanger is small, permitting a large duty to be done with minimal space
•Brazing creates a strong bond between the plates of the heat exchanger.
•Complete range of hydroponic heat exchangers available in stock for immediate delivery
•The brazed heat exchanger is a lower cost alternative to the conventional Shell & Tube heat exchangers.Comment fonctionnent les échangeurs de chaleur brasés
Le schéma d'écoulement de l'échangeur de chaleur brasé est similaire à tout autre échangeur de chaleur à plaques. Le paquet de plaques comprimées crée une série continue de canaux. Les agencements de plaques et de hublots permettent aux deux fluides caloporteurs de se déplacer dans des canaux alternés à contre-courant.
L'efficacité de ces échangeurs de chaleur est élevée en raison des schémas d'écoulement turbulents des fluides à travers les canaux. Cela permet une approche de température très proche de 2-3 degrés ; F résultant en une extraction de chaleur économique.Avantages des échangeurs de chaleur brasés dans les applications hydroponiques :
•Ils ont une cote de température/pression élevée. Tous nos échangeurs de chaleur brasés ont un 437deg ; F et 435 psig.
• La taille de l'empreinte de l'échangeur de chaleur est petite, ce qui permet d'effectuer une grande tâche avec un minimum d'espace
•Le brasage crée une liaison solide entre les plaques de l'échangeur de chaleur.
• Gamme complète d'échangeurs de chaleur hydroponiques disponibles en stock pour une livraison immédiate
•L'échangeur de chaleur brasé est une alternative moins coûteuse à l'échangeur Shell & ; Échangeurs de chaleur à tubes.• PRODUCT INFO
Flat Plate Braced Heat ex-changerBrazed plate heat exchangers are one of the most efficient ways to transfer heat. They are designed to provide unparalleled performance with the lowest life-cycle cost. Choosing brazed technology for your next heating or cooling project will bring many benefits, including savings in space, energy, and maintenance.
Eacute;changeur de chaleur agrave; plaques plates de
Les eacute;changeurs de chaleur agrave; plaques bras eacute;es sont l'un des moyens les plus efficaces pour transf & eacute;rer la chaleur. Ils sont con ccedil;us pour fournir une performance ineacute;gal eacute;e avec les co ucirc;ts de cycle de vie les plus bas. Le choix de la technologie bras eacute;e pour votre prochain projet de chauffage ou de refroidissement apportera de nombreux avantages, notamment des & eacute;conomies d'espace, d'énergie et d'entretien.Prices listed below plus taxes, $30 FLAT RATE ANYWHERE IN CANADA
Prix ci-dessous plus taxes, 30 $ TAUX FORFAITAIRE PARTOUT AU CANADA
• SHIPPING INFO
All product is shipped out Expedited shipping at Flat $30 Anywhere in Canada.
- Shipper Canada Postal Services/ Purolator, UPS & Purolator
- With Tracking• INFORMATIONS SUR LA LIVRAISON
Tous les produits sont expédiés Expédition accélérée à 30 $ fixe partout au Canada.
- Expéditeur Services postaux du Canada/ Purolator, UPS et Purolator
- Avec suivi• RETURN ; REFUND POLICY
Units that are installed can't be returned, only units in original shipping box, full return of funds. Parcel has to be shipped to our location as customer expense. 30 Percent restocking will be deducted of the refund.
• RETOUR ; POLITIQUE DE REMBOURSEMENT
Les unités installées ne peuvent pas être retournées, uniquement les unités dans la boîte d'expédition d'origine, retour complet des fonds. Le colis doit être expédié à notre emplacement en tant que frais du client. 30% de réapprovisionnement seront déduits du remboursement.Heat Exchangers Canada, Proud Part Of Nass Canada DC Division
Heat Exchangers Canada, fier membre de la division DC de Nass CanadaWe launched our new website, you should be able to order directly on line if needed, or the old traditional way by phone
Nous avons lancé notre nouveau site Web, vous devriez pouvoir commander directement en ligne si nécessaire, ou l'ancienne méthode traditionnelle par téléphone, mais notre français verbalement n'est pas si bon, souriez
Vous pouvez écrire et nous vous répondrons car nous pouvons traduire et répondre en français.
-
6
Excavator. Under 15 hours. Post driver (never been used), two buckets. Like new. $90,000. Post driver $12,000. Located in Prince George. Please message for details or call 250-306-2204.
-
7
Boyles X-Ray Diamond drill, comes with tools, AQ and E rods and bits. Old gas engine will need love or conversion. Chain driven and therefore be run with gas, air or electric drive.
-
8
Pallet racking orange 48” deep
18x 10’ uprights
74 x 10’ beams
Blue 42” deep
15x 8’ uprights
48x 10’ beams
Mesh decking
60pieces.
Small parts shelves 30
-
9
Our dry-type transformers rated 600 volts and below are available in a wide variety of types and rating to provide reliable and versatile electrical distribution for lighting and power loads in industrial and commercial applications.
Auto Transformers
The Auto Transformer is a general-purpose transformer used for applications rated from 208V-250V to 550V-600V with minimal reduction. It is commonly used for inductive and resistive loads like heating and motors. An auto transformer offers a degree of protection from incidental contact.Our Transformers are fully compliant with international standards as our products are CSA certified and UL recognized. All our transformers comply with recognized designs and manufacturing standards, which makes them suitable for application in different types of organizational units including anything from factories to data centers.
We manufacture transformers from heavy gauge steel, treat them with a phosphate conversion coating, and paint them with ASA 61 Grey. Our products are made from high-grade CRGO steel, 99.9% pure copper, and are highly efficient. Our Auto Transformers are completely resistant to rust and corrosion.
To get your free quote, send us some basic details regarding your required transformer model, voltage, and associated requirements. You can contact us by either filling out our Contact Form or by giving us a Call at 1-877-722-7616 or 905-564-1006.
Email: sales@electpower.com.